diff options
| author | Peter Griffin <peter.griffin@linaro.org> | 2015-04-10 10:40:28 +0100 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2015-04-10 12:55:40 +0200 |
| commit | 4e187d3154e6a47dfb8561aa0003d93243ec7e4a (patch) | |
| tree | 6e2431f4ee82c2dd6b35f4937a0acb6e63b9364c /drivers/mmc | |
| parent | cf48d32efb4b9e70ca1e17f2c38f77756e9aae58 (diff) | |
| download | linux-4e187d3154e6a47dfb8561aa0003d93243ec7e4a.tar.bz2 | |
mmc: sdhci-st: Update the quirks for this controller.
Some additional quirks need to be enabled now we support UHS
modes. This avoids some spurious warnings like
"Got data interrupt 0x00000002 even though no data operation was in progress"
Testing on stih410-b2120 board achieves the following speeds
with HS200 eMMC card.
max-frequency = 200Mhz
/dev/mmcblk0p1:
Timing buffered disk reads: 270 MB in 3.02 seconds = 89.54 MB/sec
max-frequency = 100Mhz
root@debian-armhf:~# hdparm -t /dev/mmcblk0p1
/dev/mmcblk0p1:
Timing buffered disk reads: 210 MB in 3.00 seconds = 70.00 MB/sec
max-frequency = 50Mhz
root@debian-armhf:~# hdparm -t /dev/mmcblk0p1
/dev/mmcblk0p1:
Timing buffered disk reads: 118 MB in 3.00 seconds = 39.28 MB/sec
This is better than the 3.10 kernel which achieves 77.59 MB/sec
at 200Mhz clock (same board/soc/eMMC).
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/host/sdhci-st.c | 5 |
1 files changed, 4 insertions, 1 deletions
diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c index 42a361c14f52..682f2bb0f4bf 100644 --- a/drivers/mmc/host/sdhci-st.c +++ b/drivers/mmc/host/sdhci-st.c @@ -340,7 +340,10 @@ static const struct sdhci_ops sdhci_st_ops = { static const struct sdhci_pltfm_data sdhci_st_pdata = { .ops = &sdhci_st_ops, .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | - SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | + SDHCI_QUIRK_NO_HISPD_BIT, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | + SDHCI_QUIRK2_STOP_WITH_TC, }; |