Merge branch 'board-specific' of git://github.com/hzhuang1/linux into next/boards

* 'board-specific' of git://github.com/hzhuang1/linux:
  pxa/hx4700: Remove pcmcia platform_device structure
  ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35%
  ARM: pxa/hx4700: Remove unwanted request for GPIO105

(update to 3.3-rc7)

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

8 files changed, 36 insertions, 23 deletions

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 690255c7d4dc..132378b89d76 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2068,6 +2068,9 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
 	 */
 	mmc_hw_reset_for_init(host);
 
+	/* Initialization should be done at 3.3 V I/O voltage. */
+	mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
 	/*
 	 * sdio_reset sends CMD52 to reset card.  Since we do not know
 	 * if the card is being re-initialized, just send it.  CMD52
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 30055f2b0d44..c3704e293a7b 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -238,10 +238,10 @@ static inline void mmc_host_clk_init(struct mmc_host *host)
 	/* Hold MCI clock for 8 cycles by default */
 	host->clk_delay = 8;
 	/*
-	 * Default clock gating delay is 200ms.
+	 * Default clock gating delay is 0ms to avoid wasting power.
 	 * This value can be tuned by writing into sysfs entry.
 	 */
-	host->clkgate_delay = 200;
+	host->clkgate_delay = 0;
 	host->clk_gated = false;
 	INIT_DELAYED_WORK(&host->clk_gate_work, mmc_host_clk_gate_work);
 	spin_lock_init(&host->clk_lock);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index a48066344fa8..2b9ed1401dc4 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -816,6 +816,9 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	if (!mmc_host_is_spi(host))
 		mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN);
 
+	/* Initialization should be done at 3.3 V I/O voltage. */
+	mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
 	/*
 	 * Since we're changing the OCR value, we seem to
 	 * need to tell some cards to go back to the idle
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 5017f9354ce2..c272c6868ecf 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -911,6 +911,9 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 	BUG_ON(!host);
 	WARN_ON(!host->claimed);
 
+	/* The initialization should be done at 3.3 V I/O voltage. */
+	mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
 	err = mmc_sd_get_cid(host, ocr, cid, &rocr);
 	if (err)
 		return err;
@@ -1156,11 +1159,6 @@ int mmc_attach_sd(struct mmc_host *host)
 	BUG_ON(!host);
 	WARN_ON(!host->claimed);
 
-	/* Make sure we are at 3.3V signalling voltage */
-	err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, false);
-	if (err)
-		return err;
-
 	/* Disable preset value enable if already set since last time */
 	if (host->ops->enable_preset_value) {
 		mmc_host_clk_hold(host);
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 12cde6ee17f5..2c7c83f832d2 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -585,6 +585,9 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	 * Inform the card of the voltage
 	 */
 	if (!powered_resume) {
+		/* The initialization should be done at 3.3 V I/O voltage. */
+		mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
 		err = mmc_send_io_op_cond(host, host->ocr, &ocr);
 		if (err)
 			goto err;
@@ -996,6 +999,11 @@ static int mmc_sdio_power_restore(struct mmc_host *host)
 	 * With these steps taken, mmc_select_voltage() is also required to
 	 * restore the correct voltage setting of the card.
 	 */
+
+	/* The initialization should be done at 3.3 V I/O voltage. */
+	if (!mmc_card_keep_power(host))
+		mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
 	sdio_reset(host);
 	mmc_go_idle(host);
 	mmc_send_if_cond(host, host->ocr_avail);
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 6985cdb0bb26..e4449a54ae8f 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1948,12 +1948,12 @@ static bool atmci_filter(struct dma_chan *chan, void *slave)
 	}
 }
 
-static void atmci_configure_dma(struct atmel_mci *host)
+static bool atmci_configure_dma(struct atmel_mci *host)
 {
 	struct mci_platform_data	*pdata;
 
 	if (host == NULL)
-		return;
+		return false;
 
 	pdata = host->pdev->dev.platform_data;
 
@@ -1970,12 +1970,15 @@ static void atmci_configure_dma(struct atmel_mci *host)
 		host->dma.chan =
 			dma_request_channel(mask, atmci_filter, pdata->dma_slave);
 	}
-	if (!host->dma.chan)
-		dev_notice(&host->pdev->dev, "DMA not available, using PIO\n");
-	else
+	if (!host->dma.chan) {
+		dev_warn(&host->pdev->dev, "no DMA channel available\n");
+		return false;
+	} else {
 		dev_info(&host->pdev->dev,
 					"Using %s for DMA transfers\n",
 					dma_chan_name(host->dma.chan));
+		return true;
+	}
 }
 
 static inline unsigned int atmci_get_version(struct atmel_mci *host)
@@ -2085,8 +2088,7 @@ static int __init atmci_probe(struct platform_device *pdev)
 
 	/* Get MCI capabilities and set operations according to it */
 	atmci_get_cap(host);
-	if (host->caps.has_dma) {
-		dev_info(&pdev->dev, "using DMA\n");
+	if (host->caps.has_dma && atmci_configure_dma(host)) {
 		host->prepare_data = &atmci_prepare_data_dma;
 		host->submit_data = &atmci_submit_data_dma;
 		host->stop_transfer = &atmci_stop_transfer_dma;
@@ -2096,15 +2098,12 @@ static int __init atmci_probe(struct platform_device *pdev)
 		host->submit_data = &atmci_submit_data_pdc;
 		host->stop_transfer = &atmci_stop_transfer_pdc;
 	} else {
-		dev_info(&pdev->dev, "no DMA, no PDC\n");
+		dev_info(&pdev->dev, "using PIO\n");
 		host->prepare_data = &atmci_prepare_data;
 		host->submit_data = &atmci_submit_data;
 		host->stop_transfer = &atmci_stop_transfer;
 	}
 
-	if (host->caps.has_dma)
-		atmci_configure_dma(host);
-
 	platform_set_drvdata(pdev, host);
 
 	/* We need at least one slot to succeed */
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 304f2f98b680..bdfd05517dd5 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1271,12 +1271,13 @@ static int __devinit mmci_probe(struct amba_device *dev,
 	/*
 	 * Block size can be up to 2048 bytes, but must be a power of two.
 	 */
-	mmc->max_blk_size = 2048;
+	mmc->max_blk_size = 1 << 11;
 
 	/*
-	 * No limit on the number of blocks transferred.
+	 * Limit the number of blocks transferred so that we don't overflow
+	 * the maximum request size.
 	 */
-	mmc->max_blk_count = mmc->max_req_size;
+	mmc->max_blk_count = mmc->max_req_size >> 11;
 
 	spin_lock_init(&host->lock);
 
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index d601e41af282..0be4e2013632 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -269,8 +269,9 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
 		imx_data->scratchpad = val;
 		return;
 	case SDHCI_COMMAND:
-		if ((host->cmd->opcode == MMC_STOP_TRANSMISSION)
-			&& (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
+		if ((host->cmd->opcode == MMC_STOP_TRANSMISSION ||
+		     host->cmd->opcode == MMC_SET_BLOCK_COUNT) &&
+	            (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
 			val |= SDHCI_CMD_ABORTCMD;
 
 		if (is_imx6q_usdhc(imx_data)) {