Merge tag 'mmc-v3.20-1' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Support for MMC power sequences.
   - SDIO function devicetree subnode parsing.
   - Refactor the hardware reset routines and enable it for SD cards.
   - Various code quality improvements, especially for slot-gpio.

  MMC host:
   - dw_mmc: Various fixes and cleanups.
   - dw_mmc: Convert to mmc_send_tuning().
   - moxart: Fix probe logic.
   - sdhci: Various fixes and cleanups
   - sdhci: Asynchronous request handling support.
   - sdhci-pxav3: Various fixes and cleanups.
   - sdhci-tegra: Fixes for T114, T124 and T132.
   - rtsx: Various fixes and cleanups.
   - rtsx: Support for SDIO.
   - sdhi/tmio: Refactor and cleanup of header files.
   - omap_hsmmc: Use slot-gpio and common MMC DT parser.
   - Make all hosts to deal with errors from mmc_of_parse().
   - sunxi: Various fixes and cleanups.
   - sdhci: Support for Fujitsu SDHCI controller f_sdh30"

* tag 'mmc-v3.20-1' of git://git.linaro.org/people/ulf.hansson/mmc: (117 commits)
  mmc: sdhci-s3c: solve problem with sleeping in atomic context
  mmc: pwrseq: add driver for emmc hardware reset
  mmc: moxart: fix probe logic
  mmc: core: Invoke mmc_pwrseq_post_power_on() prior MMC_POWER_ON state
  mmc: pwrseq_simple: Add optional reference clock support
  mmc: pwrseq: Document optional clock for the simple power sequence
  mmc: pwrseq_simple: Extend to support more pins
  mmc: pwrseq: Document that simple sequence support more than one GPIO
  mmc: Add hardware dependencies for sdhci-pxav3 and sdhci-pxav2
  mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes
  mmc: sdhci-pxav3: Extend binding with SDIO3 conf reg for the Armada 38x
  mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951
  mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x flavor
  mmc: sdhci: switch voltage before sdhci_set_ios in runtime resume
  mmc: tegra: Write xfer_mode, CMD regs in together
  mmc: Resolve BKOPS compatability issue
  mmc: sdhci-pxav3: fix setting of pdata->clk_delay_cycles
  mmc: dw_mmc: rockchip: remove incorrect __exit_p()
  mmc: dw_mmc: exynos: remove incorrect __exit_p()
  mmc: Fix menuconfig alignment of MMC_SDHCI_* options
  ...

1 files changed, 102 insertions, 23 deletions

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index f1a488ee432f..0ad412a4876f 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -53,6 +53,9 @@ static void sdhci_finish_command(struct sdhci_host *);
 static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
 static void sdhci_tuning_timer(unsigned long data);
 static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
+static int sdhci_pre_dma_transfer(struct sdhci_host *host,
+					struct mmc_data *data,
+					struct sdhci_host_next *next);
 
 #ifdef CONFIG_PM
 static int sdhci_runtime_pm_get(struct sdhci_host *host);
@@ -505,9 +508,8 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 		goto fail;
 	BUG_ON(host->align_addr & host->align_mask);
 
-	host->sg_count = dma_map_sg(mmc_dev(host->mmc),
-		data->sg, data->sg_len, direction);
-	if (host->sg_count == 0)
+	host->sg_count = sdhci_pre_dma_transfer(host, data, NULL);
+	if (host->sg_count < 0)
 		goto unmap_align;
 
 	desc = host->adma_table;
@@ -531,8 +533,6 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 		if (offset) {
 			if (data->flags & MMC_DATA_WRITE) {
 				buffer = sdhci_kmap_atomic(sg, &flags);
-				WARN_ON(((long)buffer & (PAGE_SIZE - 1)) >
-					(PAGE_SIZE - offset));
 				memcpy(align, buffer, offset);
 				sdhci_kunmap_atomic(buffer, &flags);
 			}
@@ -639,8 +639,6 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
 				       (sg_dma_address(sg) & host->align_mask);
 
 				buffer = sdhci_kmap_atomic(sg, &flags);
-				WARN_ON(((long)buffer & (PAGE_SIZE - 1)) >
-					(PAGE_SIZE - size));
 				memcpy(buffer, align, size);
 				sdhci_kunmap_atomic(buffer, &flags);
 
@@ -649,8 +647,9 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
 		}
 	}
 
-	dma_unmap_sg(mmc_dev(host->mmc), data->sg,
-		data->sg_len, direction);
+	if (!data->host_cookie)
+		dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+			data->sg_len, direction);
 }
 
 static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
@@ -846,11 +845,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
 		} else {
 			int sg_cnt;
 
-			sg_cnt = dma_map_sg(mmc_dev(host->mmc),
-					data->sg, data->sg_len,
-					(data->flags & MMC_DATA_READ) ?
-						DMA_FROM_DEVICE :
-						DMA_TO_DEVICE);
+			sg_cnt = sdhci_pre_dma_transfer(host, data, NULL);
 			if (sg_cnt == 0) {
 				/*
 				 * This only happens when someone fed
@@ -909,7 +904,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
 static void sdhci_set_transfer_mode(struct sdhci_host *host,
 	struct mmc_command *cmd)
 {
-	u16 mode;
+	u16 mode = 0;
 	struct mmc_data *data = cmd->data;
 
 	if (data == NULL) {
@@ -927,9 +922,11 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
 
 	WARN_ON(!host->data);
 
-	mode = SDHCI_TRNS_BLK_CNT_EN;
+	if (!(host->quirks2 & SDHCI_QUIRK2_SUPPORT_SINGLE))
+		mode = SDHCI_TRNS_BLK_CNT_EN;
+
 	if (mmc_op_multi(cmd->opcode) || data->blocks > 1) {
-		mode |= SDHCI_TRNS_MULTI;
+		mode = SDHCI_TRNS_BLK_CNT_EN | SDHCI_TRNS_MULTI;
 		/*
 		 * If we are sending CMD23, CMD12 never gets sent
 		 * on successful completion (so no Auto-CMD12).
@@ -963,8 +960,10 @@ static void sdhci_finish_data(struct sdhci_host *host)
 		if (host->flags & SDHCI_USE_ADMA)
 			sdhci_adma_table_post(host, data);
 		else {
-			dma_unmap_sg(mmc_dev(host->mmc), data->sg,
-				data->sg_len, (data->flags & MMC_DATA_READ) ?
+			if (!data->host_cookie)
+				dma_unmap_sg(mmc_dev(host->mmc),
+					data->sg, data->sg_len,
+					(data->flags & MMC_DATA_READ) ?
 					DMA_FROM_DEVICE : DMA_TO_DEVICE);
 		}
 	}
@@ -1630,7 +1629,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 	 * signalling timeout and CRC errors even on CMD0. Resetting
 	 * it on each ios seems to solve the problem.
 	 */
-	if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
+	if (host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
 		sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
 
 	mmiowb();
@@ -1832,6 +1831,10 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 		ctrl |= SDHCI_CTRL_VDD_180;
 		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
 
+		/* Some controller need to do more when switching */
+		if (host->ops->voltage_switch)
+			host->ops->voltage_switch(host);
+
 		/* 1.8V regulator output should be stable within 5 ms */
 		ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 		if (ctrl & SDHCI_CTRL_VDD_180)
@@ -1960,6 +1963,8 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 
 	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 	ctrl |= SDHCI_CTRL_EXEC_TUNING;
+	if (host->quirks2 & SDHCI_QUIRK2_TUNING_WORK_AROUND)
+		ctrl |= SDHCI_CTRL_TUNED_CLK;
 	sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
 
 	/*
@@ -2129,6 +2134,77 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
 	}
 }
 
+static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
+				int err)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct mmc_data *data = mrq->data;
+
+	if (host->flags & SDHCI_REQ_USE_DMA) {
+		if (data->host_cookie)
+			dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+					 data->flags & MMC_DATA_WRITE ?
+					 DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		mrq->data->host_cookie = 0;
+	}
+}
+
+static int sdhci_pre_dma_transfer(struct sdhci_host *host,
+				       struct mmc_data *data,
+				       struct sdhci_host_next *next)
+{
+	int sg_count;
+
+	if (!next && data->host_cookie &&
+	    data->host_cookie != host->next_data.cookie) {
+		pr_debug(DRIVER_NAME "[%s] invalid cookie: %d, next-cookie %d\n",
+			__func__, data->host_cookie, host->next_data.cookie);
+		data->host_cookie = 0;
+	}
+
+	/* Check if next job is already prepared */
+	if (next ||
+	    (!next && data->host_cookie != host->next_data.cookie)) {
+		sg_count = dma_map_sg(mmc_dev(host->mmc), data->sg,
+				     data->sg_len,
+				     data->flags & MMC_DATA_WRITE ?
+				     DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+	} else {
+		sg_count = host->next_data.sg_count;
+		host->next_data.sg_count = 0;
+	}
+
+
+	if (sg_count == 0)
+		return -EINVAL;
+
+	if (next) {
+		next->sg_count = sg_count;
+		data->host_cookie = ++next->cookie < 0 ? 1 : next->cookie;
+	} else
+		host->sg_count = sg_count;
+
+	return sg_count;
+}
+
+static void sdhci_pre_req(struct mmc_host *mmc, struct mmc_request *mrq,
+			       bool is_first_req)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+
+	if (mrq->data->host_cookie) {
+		mrq->data->host_cookie = 0;
+		return;
+	}
+
+	if (host->flags & SDHCI_REQ_USE_DMA)
+		if (sdhci_pre_dma_transfer(host,
+					mrq->data,
+					&host->next_data) < 0)
+			mrq->data->host_cookie = 0;
+}
+
 static void sdhci_card_event(struct mmc_host *mmc)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
@@ -2162,6 +2238,8 @@ static void sdhci_card_event(struct mmc_host *mmc)
 
 static const struct mmc_host_ops sdhci_ops = {
 	.request	= sdhci_request,
+	.post_req	= sdhci_post_req,
+	.pre_req	= sdhci_pre_req,
 	.set_ios	= sdhci_set_ios,
 	.get_cd		= sdhci_get_cd,
 	.get_ro		= sdhci_get_ro,
@@ -2793,9 +2871,9 @@ int sdhci_runtime_resume_host(struct sdhci_host *host)
 	/* Force clock and power re-program */
 	host->pwr = 0;
 	host->clock = 0;
+	sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
 	sdhci_do_set_ios(host, &host->mmc->ios);
 
-	sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
 	if ((host_flags & SDHCI_PV_ENABLED) &&
 		!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
 		spin_lock_irqsave(&host->lock, flags);
@@ -3019,6 +3097,7 @@ int sdhci_add_host(struct sdhci_host *host)
 		host->max_clk = host->ops->get_max_clock(host);
 	}
 
+	host->next_data.cookie = 1;
 	/*
 	 * In case of Host Controller v3.00, find out whether clock
 	 * multiplier is supported.
@@ -3338,9 +3417,9 @@ int sdhci_add_host(struct sdhci_host *host)
 
 	setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
 
-	if (host->version >= SDHCI_SPEC_300) {
-		init_waitqueue_head(&host->buf_ready_int);
+	init_waitqueue_head(&host->buf_ready_int);
 
+	if (host->version >= SDHCI_SPEC_300) {
 		/* Initialize re-tuning timer */
 		init_timer(&host->tuning_timer);
 		host->tuning_timer.data = (unsigned long)host;