diff options
| author | Stefan Agner <stefan@agner.ch> | 2018-07-05 14:18:19 +0200 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2018-07-16 11:21:45 +0200 |
| commit | 1b5190c2e74c47ebe4bcecf7a072358ad9f1feaa (patch) | |
| tree | b115e61b3dab4fed7f593781b2ddc70dd68a4332 /drivers/mmc/host/sdhci.c | |
| parent | 5552d7ad596c3fea953f40fef74170ce0760c04d (diff) | |
| download | linux-1b5190c2e74c47ebe4bcecf7a072358ad9f1feaa.tar.bz2 | |
mmc: sdhci: do not try to use 3.3V signaling if not supported
For eMMC devices it is valid to only support 1.8V signaling. When
vqmmc is set to a fixed 1.8V regulator the stack tries to set 3.3V
initially and prints the following warning:
mmc1: Switching to 3.3V signalling voltage failed
Clear the MMC_SIGNAL_VOLTAGE_330 flag in case 3.3V is signaling is
not available. This prevents the stack from even trying to use
3.3V signaling and avoids the above warning.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc/host/sdhci.c')
| -rw-r--r-- | drivers/mmc/host/sdhci.c | 9 |
1 files changed, 8 insertions, 1 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 1c828e0e9905..a7b5602ef6f7 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -3734,14 +3734,21 @@ int sdhci_setup_host(struct sdhci_host *host) mmc_gpio_get_cd(host->mmc) < 0) mmc->caps |= MMC_CAP_NEEDS_POLL; - /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */ if (!IS_ERR(mmc->supply.vqmmc)) { ret = regulator_enable(mmc->supply.vqmmc); + + /* If vqmmc provides no 1.8V signalling, then there's no UHS */ if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000, 1950000)) host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50); + + /* In eMMC case vqmmc might be a fixed 1.8V regulator */ + if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 2700000, + 3600000)) + host->flags &= ~SDHCI_SIGNALING_330; + if (ret) { pr_warn("%s: Failed to enable vqmmc regulator: %d\n", mmc_hostname(mmc), ret); |