Merge tag 'mmc-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "Here's quite a few MMC fixes intended for v5.2-rc6. This time it also
  contains fixes for a WiFi driver, which device is attached to the SDIO
  interface. Patches for the WiFi driver have been acked by the
  corresponding maintainers.

  Summary:

  MMC core:
   - Make switch to eMMC HS400 more robust for some controllers
   - Add two SDIO func API to manage re-tuning constraints
   - Prevent processing SDIO IRQs when the card is suspended

  MMC host:
   - sdhi: Disallow broken HS400 for M3-W ES1.2, RZ/G2M and V3H
   - mtk-sd: Fixup support for SDIO IRQs
   - sdhci-pci-o2micro: Fixup support for tuning

  Wireless BRCMFMAC (SDIO):
   - Deal with expected transmission errors related to the idle states
     (handled by the Always-On-Subsystem or AOS) on the SDIO-based WiFi
     on rk3288-veyron-minnie, rk3288-veyron-speedy and
     rk3288-veyron-mickey"

* tag 'mmc-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Prevent processing SDIO IRQs when the card is suspended
  mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning
  brcmfmac: sdio: Don't tune while the card is off
  mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()
  brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  mmc: core: API to temporarily disable retuning for SDIO CRC errors
  Revert "brcmfmac: disable command decode in sdio_aos"
  mmc: mediatek: fix SDIO IRQ detection issue
  mmc: mediatek: fix SDIO IRQ interrupt handle flow
  mmc: core: complete HS400 before checking status
  mmc: sdhi: disallow HS400 for M3-W ES1.2, RZ/G2M, and V3H

1 files changed, 4 insertions, 1 deletions

diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index b29bf4e7dcb4..dd21315922c8 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -115,6 +115,7 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	 */
 	if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
 		current_bus_width = mmc->ios.bus_width;
+		mmc->ios.bus_width = MMC_BUS_WIDTH_4;
 		sdhci_set_bus_width(host, MMC_BUS_WIDTH_4);
 	}
 
@@ -126,8 +127,10 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
 
 	sdhci_end_tuning(host);
 
-	if (current_bus_width == MMC_BUS_WIDTH_8)
+	if (current_bus_width == MMC_BUS_WIDTH_8) {
+		mmc->ios.bus_width = MMC_BUS_WIDTH_8;
 		sdhci_set_bus_width(host, current_bus_width);
+	}
 
 	host->flags &= ~SDHCI_HS400_TUNING;
 	return 0;