diff options
| author | Ulf Hansson <ulf.hansson@linaro.org> | 2017-01-25 10:25:01 +0100 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2017-02-13 13:20:43 +0100 |
| commit | 2ed573b603f78289dd1435c94597aa25a97e2b76 (patch) | |
| tree | 5c4847836397b3e9fbbfd0b69e609f2528bf8c8b /drivers/mmc/core/core.c | |
| parent | a44efa4796249c6d4341935e90e9105d6e1a5f15 (diff) | |
| download | linux-2ed573b603f78289dd1435c94597aa25a97e2b76.tar.bz2 | |
mmc: core: Clarify usage of mmc_set_signal_voltage()
The mmc_set_signal_voltage() function is used for SD/SDIO when switching to
1.8V for UHS mode. To clarify this let's do the following changes.
- We are always providing MMC_SIGNAL_VOLTAGE_180 as the signal_voltage
parameter to the function. Then, let's just remove the parameter as it
serves no purpose.
- Rename the function to mmc_set_uhs_voltage().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Jan Glauber <jglauber@cavium.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Diffstat (limited to 'drivers/mmc/core/core.c')
| -rw-r--r-- | drivers/mmc/core/core.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index bb819d49291e..82c1a02b9c2a 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1647,7 +1647,7 @@ int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage) } -int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr) +int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr) { struct mmc_command cmd = {}; int err = 0; @@ -1691,7 +1691,7 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr) host->ios.clock = 0; mmc_set_ios(host); - if (__mmc_set_signal_voltage(host, signal_voltage)) { + if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180)) { /* * Voltages may not have been switched, but we've already * sent CMD11, so a power cycle is required anyway |