diff options
| author | Oded Gabbay <ogabbay@kernel.org> | 2020-12-05 22:55:09 +0200 |
|---|---|---|
| committer | Oded Gabbay <ogabbay@kernel.org> | 2020-12-28 08:47:38 +0200 |
| commit | 0024c094851f718ccb0b797255292bdce850a01f (patch) | |
| tree | 460d579994cf17fc3eed0d85834eadcc3dbc0258 /drivers/misc | |
| parent | 7a585dfc32110a106f70474c6fa822d912a92c7e (diff) | |
| download | linux-0024c094851f718ccb0b797255292bdce850a01f.tar.bz2 | |
habanalabs/gaudi: disable CGM at HW initialization
In case the clock gating was enabled in preboot we need to disable it
at the H/W initialization stage before touching the MME/TPC registers.
Otherwise, the ASIC can get stuck. If the security is enabled in
the firmware level, the CGM is always disabled and the driver can't
enable it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Diffstat (limited to 'drivers/misc')
| -rw-r--r-- | drivers/misc/habanalabs/gaudi/gaudi.c | 14 | ||||
| -rw-r--r-- | drivers/misc/habanalabs/include/common/hl_boot_if.h | 5 |
2 files changed, 16 insertions, 3 deletions
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index 65895ba075fe..f316b898e8e0 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -2403,8 +2403,6 @@ static void gaudi_init_golden_registers(struct hl_device *hdev) gaudi_init_e2e(hdev); gaudi_init_hbm_cred(hdev); - hdev->asic_funcs->disable_clock_gating(hdev); - for (tpc_id = 0, tpc_offset = 0; tpc_id < TPC_NUMBER_OF_ENGINES; tpc_id++, tpc_offset += TPC_CFG_OFFSET) { @@ -3416,6 +3414,9 @@ static void gaudi_set_clock_gating(struct hl_device *hdev) if (hdev->in_debug) return; + if (!hdev->asic_prop.fw_security_disabled) + return; + for (i = GAUDI_PCI_DMA_1, qman_offset = 0 ; i < GAUDI_HBM_DMA_1 ; i++) { enable = !!(hdev->clock_gating_mask & (BIT_ULL(gaudi_dma_assignment[i]))); @@ -3467,7 +3468,7 @@ static void gaudi_disable_clock_gating(struct hl_device *hdev) u32 qman_offset; int i; - if (!(gaudi->hw_cap_initialized & HW_CAP_CLK_GATE)) + if (!hdev->asic_prop.fw_security_disabled) return; for (i = 0, qman_offset = 0 ; i < DMA_NUMBER_OF_CHANNELS ; i++) { @@ -3801,6 +3802,13 @@ static int gaudi_hw_init(struct hl_device *hdev) return rc; } + /* In case the clock gating was enabled in preboot we need to disable + * it here before touching the MME/TPC registers. + * There is no need to take clk gating mutex because when this function + * runs, no other relevant code can run + */ + hdev->asic_funcs->disable_clock_gating(hdev); + /* SRAM scrambler must be initialized after CPU is running from HBM */ gaudi_init_scrambler_sram(hdev); diff --git a/drivers/misc/habanalabs/include/common/hl_boot_if.h b/drivers/misc/habanalabs/include/common/hl_boot_if.h index 755c4800f002..7cb5f2d3e565 100644 --- a/drivers/misc/habanalabs/include/common/hl_boot_if.h +++ b/drivers/misc/habanalabs/include/common/hl_boot_if.h @@ -150,6 +150,10 @@ * CPU_BOOT_DEV_STS0_PLL_INFO_EN FW retrieval of PLL info is enabled. * Initialized in: linux * + * CPU_BOOT_DEV_STS0_CLK_GATE_EN Clock Gating enabled. + * FW initialized Clock Gating. + * Initialized in: preboot + * * CPU_BOOT_DEV_STS0_ENABLED Device status register enabled. * This is a main indication that the * running FW populates the device status @@ -171,6 +175,7 @@ #define CPU_BOOT_DEV_STS0_DRAM_SCR_EN (1 << 9) #define CPU_BOOT_DEV_STS0_FW_HARD_RST_EN (1 << 10) #define CPU_BOOT_DEV_STS0_PLL_INFO_EN (1 << 11) +#define CPU_BOOT_DEV_STS0_CLK_GATE_EN (1 << 13) #define CPU_BOOT_DEV_STS0_ENABLED (1 << 31) enum cpu_boot_status { |