summaryrefslogtreecommitdiffstats
path: root/drivers/mfd
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-04-07 10:24:18 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-04-07 10:24:18 -0700
commite5744abb2fa3629aa5a94e21ca1eae32ff2fe00b (patch)
treeef90c96390256b073f5255d224aecb2fc1f6ee84 /drivers/mfd
parentc29aa153ef0469cddf0146d41ce6494bd76be78b (diff)
parent2d28ca731b9bb6262f7711241628c7844b0cf7dc (diff)
downloadlinux-e5744abb2fa3629aa5a94e21ca1eae32ff2fe00b.tar.bz2
Merge tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones: "Changes to existing drivers: - Use of managed resources - omap, twl4030, ti_am335x_tscadc - Advanced error handling - omap - Rework clk management - omap - Device Tree (re-)work - tc3589x, pm8921, da9055, sec - IRC management overhaul and !BROKEN - pm8921 - Convert to regmap - ssbi, pm8921 - Use simple power-management ops - ucb1x00 - Include file clean-up - adp5520, cs5535, janz, lpc_ich, - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583, rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc, tps65912, vexpress-config, wm8350, ywm8350 - Various bug fixes across the subsystem - NULL/invalid pointer dereference prevention - Resource leak mitigation, - Variable used initialised - Staticise various containers - Enforce return value checks New drivers/supported devices: - Add support for s2mps14 and s2mpa01 to sec - Add support for da9063 (v5) to da9063 - Add support for atom-c2000 to gpio-ich - Add support for come-{mbt10,cbt6,chl6} to kempld - Add support for da9053 to da9052 - Add support for itco-wdt (v3) and baytrail to lpc_ich - Add new drivers for tps65218, rtsx_usb, bcm590xx (Re-)moved drivers: - twl4030 ==> drivers/iio - ti-ssp ==> /dev/null" * tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits) mfd: wm5110: Correct default for HEADPHONE_DETECT_1 mfd: arizona: Correct small errors in the DT binding documentation mfd: arizona: Mark DSP clocking register as volatile mfd: devicetree: bindings: Add pm8xxx RTC description mfd: kempld-core: Fix potential hang-up during boot mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01 mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail mfd: sec-core: Fix I2C dummy device resource leak on probe failure mfd: sec-core: Add of_compatible strings for clock MFD cells mfd: Remove obsolete ti-ssp driver Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks mfd: bcm590xx: Fix type argument for module device table mfd: lpc_ich: Add support for Intel Bay Trail SoC mfd: lpc_ich: Add support for NM10 GPIO mfd: lpc_ich: Change Avoton to iTCO v3 watchdog: iTCO_wdt: Add support for v3 silicon mfd: lpc_ich: Add support for iTCO v3 mfd: lpc_ich: Remove lpc_ich_cfg struct use mfd: lpc_ich: Only configure watchdog or GPIO when present ...
Diffstat (limited to 'drivers/mfd')
-rw-r--r--drivers/mfd/88pm800.c3
-rw-r--r--drivers/mfd/88pm860x-core.c6
-rw-r--r--drivers/mfd/Kconfig98
-rw-r--r--drivers/mfd/Makefile6
-rw-r--r--drivers/mfd/adp5520.c1
-rw-r--r--drivers/mfd/as3722.c1
-rw-r--r--drivers/mfd/bcm590xx.c93
-rw-r--r--drivers/mfd/cs5535-mfd.c1
-rw-r--r--drivers/mfd/da9052-core.c3
-rw-r--r--drivers/mfd/da9052-i2c.c5
-rw-r--r--drivers/mfd/da9052-spi.c1
-rw-r--r--drivers/mfd/da9055-i2c.c8
-rw-r--r--drivers/mfd/da9063-core.c25
-rw-r--r--drivers/mfd/janz-cmodio.c1
-rw-r--r--drivers/mfd/kempld-core.c31
-rw-r--r--drivers/mfd/lpc_ich.c151
-rw-r--r--drivers/mfd/lpc_sch.c1
-rw-r--r--drivers/mfd/max14577.c6
-rw-r--r--drivers/mfd/max77686.c4
-rw-r--r--drivers/mfd/max77693.c12
-rw-r--r--drivers/mfd/max8925-i2c.c9
-rw-r--r--drivers/mfd/max8997.c18
-rw-r--r--drivers/mfd/max8998.c4
-rw-r--r--drivers/mfd/mc13xxx-spi.c5
-rw-r--r--drivers/mfd/mcp-sa11x0.c1
-rw-r--r--drivers/mfd/omap-usb-host.c189
-rw-r--r--drivers/mfd/omap-usb-tll.c2
-rw-r--r--drivers/mfd/pcf50633-adc.c1
-rw-r--r--drivers/mfd/pm8921-core.c419
-rw-r--r--drivers/mfd/pm8xxx-irq.c371
-rw-r--r--drivers/mfd/rc5t583-irq.c1
-rw-r--r--drivers/mfd/rdc321x-southbridge.c1
-rw-r--r--drivers/mfd/retu-mfd.c1
-rw-r--r--drivers/mfd/rtsx_usb.c760
-rw-r--r--drivers/mfd/sec-core.c17
-rw-r--r--drivers/mfd/smsc-ece1099.c1
-rw-r--r--drivers/mfd/stmpe.c2
-rw-r--r--drivers/mfd/stw481x.c8
-rw-r--r--drivers/mfd/syscon.c9
-rw-r--r--drivers/mfd/tc3589x.c84
-rw-r--r--drivers/mfd/ti-ssp.c465
-rw-r--r--drivers/mfd/ti_am335x_tscadc.c24
-rw-r--r--drivers/mfd/timberdale.c2
-rw-r--r--drivers/mfd/tps65218.c282
-rw-r--r--drivers/mfd/tps65910.c5
-rw-r--r--drivers/mfd/tps65912-core.c1
-rw-r--r--drivers/mfd/tps65912-irq.c1
-rw-r--r--drivers/mfd/twl-core.c10
-rw-r--r--drivers/mfd/twl4030-irq.c1
-rw-r--r--drivers/mfd/twl4030-madc.c818
-rw-r--r--drivers/mfd/twl6030-irq.c1
-rw-r--r--drivers/mfd/twl6040.c6
-rw-r--r--drivers/mfd/ucb1x00-core.c4
-rw-r--r--drivers/mfd/vexpress-config.c3
-rw-r--r--drivers/mfd/vexpress-sysreg.c2
-rw-r--r--drivers/mfd/wm5102-tables.c36
-rw-r--r--drivers/mfd/wm5110-tables.c174
-rw-r--r--drivers/mfd/wm8350-core.c1
-rw-r--r--drivers/mfd/wm8350-irq.c1
-rw-r--r--drivers/mfd/wm8400-core.c22
60 files changed, 2197 insertions, 2022 deletions
diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
index 7dca1e640970..841717a2842c 100644
--- a/drivers/mfd/88pm800.c
+++ b/drivers/mfd/88pm800.c
@@ -571,7 +571,7 @@ static int pm800_probe(struct i2c_client *client,
ret = pm800_pages_init(chip);
if (ret) {
dev_err(&client->dev, "pm800_pages_init failed!\n");
- goto err_page_init;
+ goto err_device_init;
}
ret = device_800_init(chip, pdata);
@@ -587,7 +587,6 @@ static int pm800_probe(struct i2c_client *client,
err_device_init:
pm800_pages_exit(chip);
-err_page_init:
err_subchip_alloc:
pm80x_deinit();
out_init:
diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
index c9b1f6422941..bcfc9e85b4a0 100644
--- a/drivers/mfd/88pm860x-core.c
+++ b/drivers/mfd/88pm860x-core.c
@@ -1179,12 +1179,18 @@ static int pm860x_probe(struct i2c_client *client,
chip->companion_addr = pdata->companion_addr;
chip->companion = i2c_new_dummy(chip->client->adapter,
chip->companion_addr);
+ if (!chip->companion) {
+ dev_err(&client->dev,
+ "Failed to allocate I2C companion device\n");
+ return -ENODEV;
+ }
chip->regmap_companion = regmap_init_i2c(chip->companion,
&pm860x_regmap_config);
if (IS_ERR(chip->regmap_companion)) {
ret = PTR_ERR(chip->regmap_companion);
dev_err(&chip->companion->dev,
"Failed to allocate register map: %d\n", ret);
+ i2c_unregister_device(chip->companion);
return ret;
}
i2c_set_clientdata(chip->companion, chip);
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 49bb445d846a..33834120d057 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -59,6 +59,14 @@ config MFD_AAT2870_CORE
additional drivers must be enabled in order to use the
functionality of the device.
+config MFD_BCM590XX
+ tristate "Broadcom BCM590xx PMUs"
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on I2C
+ help
+ Support for the BCM590xx PMUs from Broadcom
+
config MFD_CROS_EC
tristate "ChromeOS Embedded Controller"
select MFD_CORE
@@ -100,7 +108,7 @@ config PMIC_DA903X
bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
depends on I2C=y
help
- Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
+ Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a
ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
usually found on PXA processors-based platforms. This includes
the I2C driver and the core APIs _only_, you have to select
@@ -270,13 +278,18 @@ config MFD_KEMPLD
device may provide functions like watchdog, GPIO, UART and I2C bus.
The following modules are supported:
+ * COMe-bHL6
* COMe-bIP#
* COMe-bPC2 (ETXexpress-PC)
* COMe-bSC# (ETXexpress-SC T#)
+ * COMe-cBT6
* COMe-cCT6
* COMe-cDC2 (microETXexpress-DC)
+ * COMe-cHL6
* COMe-cPC2 (microETXexpress-PC)
+ * COMe-mBT10
* COMe-mCT10
+ * COMe-mTT10 (nanoETXexpress-TT)
* ETX-OH
This driver can also be built as a module. If so, the module
@@ -322,9 +335,10 @@ config MFD_MAX14577
depends on I2C=y
select MFD_CORE
select REGMAP_I2C
+ select REGMAP_IRQ
select IRQ_DOMAIN
help
- Say yes here to support for Maxim Semiconductor MAX14577.
+ Say yes here to add support for Maxim Semiconductor MAX14577.
This is a Micro-USB IC with Charger controls on chip.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the functionality
@@ -337,7 +351,7 @@ config MFD_MAX77686
select REGMAP_I2C
select IRQ_DOMAIN
help
- Say yes here to support for Maxim Semiconductor MAX77686.
+ Say yes here to add support for Maxim Semiconductor MAX77686.
This is a Power Management IC with RTC on chip.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the functionality
@@ -349,7 +363,7 @@ config MFD_MAX77693
select MFD_CORE
select REGMAP_I2C
help
- Say yes here to support for Maxim Semiconductor MAX77693.
+ Say yes here to add support for Maxim Semiconductor MAX77693.
This is a companion Power Management IC with Flash, Haptic, Charger,
and MUIC(Micro USB Interface Controller) controls on chip.
This driver provides common support for accessing the device;
@@ -363,7 +377,7 @@ config MFD_MAX8907
select REGMAP_I2C
select REGMAP_IRQ
help
- Say yes here to support for Maxim Semiconductor MAX8907. This is
+ Say yes here to add support for Maxim Semiconductor MAX8907. This is
a Power Management IC. This driver provides common support for
accessing the device; additional drivers must be enabled in order
to use the functionality of the device.
@@ -373,7 +387,7 @@ config MFD_MAX8925
depends on I2C=y
select MFD_CORE
help
- Say yes here to support for Maxim Semiconductor MAX8925. This is
+ Say yes here to add support for Maxim Semiconductor MAX8925. This is
a Power Management IC. This driver provides common support for
accessing the device, additional drivers must be enabled in order
to use the functionality of the device.
@@ -384,7 +398,7 @@ config MFD_MAX8997
select MFD_CORE
select IRQ_DOMAIN
help
- Say yes here to support for Maxim Semiconductor MAX8997/8966.
+ Say yes here to add support for Maxim Semiconductor MAX8997/8966.
This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
MUIC controls on chip.
This driver provides common support for accessing the device;
@@ -397,7 +411,7 @@ config MFD_MAX8998
select MFD_CORE
select IRQ_DOMAIN
help
- Say yes here to support for Maxim Semiconductor MAX8998 and
+ Say yes here to add support for Maxim Semiconductor MAX8998 and
National Semiconductor LP3974. This is a Power Management IC.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
@@ -473,10 +487,11 @@ config MFD_PM8XXX
config MFD_PM8921_CORE
tristate "Qualcomm PM8921 PMIC chip"
- depends on (ARCH_MSM || HEXAGON)
- depends on BROKEN
+ depends on (ARM || HEXAGON)
+ select IRQ_DOMAIN
select MFD_CORE
select MFD_PM8XXX
+ select REGMAP
help
If you say yes to this option, support will be included for the
built-in PM8921 PMIC chip.
@@ -487,16 +502,6 @@ config MFD_PM8921_CORE
Say M here if you want to include support for PM8921 chip as a module.
This will build a module called "pm8921-core".
-config MFD_PM8XXX_IRQ
- bool "Qualcomm PM8xxx IRQ features"
- depends on MFD_PM8XXX
- default y if MFD_PM8XXX
- help
- This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
-
- This is required to use certain other PM 8xxx features, such as GPIO
- and MPP.
-
config MFD_RDC321X
tristate "RDC R-321x southbridge"
select MFD_CORE
@@ -516,6 +521,16 @@ config MFD_RTSX_PCI
types of memory cards, such as Memory Stick, Memory Stick Pro,
Secure Digital and MultiMediaCard.
+config MFD_RTSX_USB
+ tristate "Realtek USB card reader"
+ depends on USB
+ select MFD_CORE
+ help
+ Select this option to get support for Realtek USB 2.0 card readers
+ including RTS5129, RTS5139, RTS5179 and RTS5170.
+ Realtek card reader supports access to many types of memory cards,
+ such as Memory Stick Pro, Secure Digital and MultiMediaCard.
+
config MFD_RC5T583
bool "Ricoh RC5T583 Power Management system device"
depends on I2C=y
@@ -774,17 +789,6 @@ config MFD_PALMAS
If you say yes here you get support for the Palmas
series of PMIC chips from Texas Instruments.
-config MFD_TI_SSP
- tristate "TI Sequencer Serial Port support"
- depends on ARCH_DAVINCI_TNETV107X
- select MFD_CORE
- ---help---
- Say Y here if you want support for the Sequencer Serial Port
- in a Texas Instruments TNETV107X SoC.
-
- To compile this driver as a module, choose M here: the
- module will be called ti-ssp.
-
config TPS6105X
tristate "TI TPS61050/61052 Boost Converters"
depends on I2C
@@ -853,6 +857,22 @@ config MFD_TPS65217
This driver can also be built as a module. If so, the module
will be called tps65217.
+config MFD_TPS65218
+ tristate "TI TPS65218 Power Management chips"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ If you say yes here you get support for the TPS65218 series of
+ Power Management chips.
+ These include voltage regulators, gpio and other features
+ that are often used in portable devices. Only regulator
+ component is currently supported.
+
+ This driver can also be built as a module. If so, the module
+ will be called tps65218.
+
config MFD_TPS6586X
bool "TI TPS6586x Power Management chips"
depends on I2C=y
@@ -935,16 +955,6 @@ config TWL4030_CORE
high speed USB OTG transceiver, an audio codec (on most
versions) and many other features.
-config TWL4030_MADC
- tristate "TI TWL4030 MADC"
- depends on TWL4030_CORE
- help
- This driver provides support for triton TWL4030-MADC. The
- driver supports both RT and SW conversion methods.
-
- This driver can be built as a module. If so it will be
- named twl4030-madc
-
config TWL4030_POWER
bool "TI TWL4030 power resources"
depends on TWL4030_CORE && ARM
@@ -1193,9 +1203,6 @@ config MFD_STW481X
in various ST Microelectronics and ST-Ericsson embedded
Nomadik series.
-endmenu
-endif
-
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
@@ -1226,3 +1233,6 @@ config VEXPRESS_CONFIG
help
Platform configuration infrastructure for the ARM Ltd.
Versatile Express.
+
+endmenu
+endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 5aea5ef0a62f..2851275e2656 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -8,12 +8,14 @@ obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
+obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
obj-$(CONFIG_MFD_CROS_EC) += cros_ec.o
obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o
obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o
rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o
+obj-$(CONFIG_MFD_RTSX_USB) += rtsx_usb.o
obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
@@ -21,7 +23,6 @@ obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o
obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
-obj-$(CONFIG_MFD_TI_SSP) += ti-ssp.o
obj-$(CONFIG_MFD_TI_AM335X_TSCADC) += ti_am335x_tscadc.o
obj-$(CONFIG_MFD_STA2X11) += sta2x11-mfd.o
@@ -62,6 +63,7 @@ obj-$(CONFIG_TPS6105X) += tps6105x.o
obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_TPS6507X) += tps6507x.o
obj-$(CONFIG_MFD_TPS65217) += tps65217.o
+obj-$(CONFIG_MFD_TPS65218) += tps65218.o
obj-$(CONFIG_MFD_TPS65910) += tps65910.o
tps65912-objs := tps65912-core.o tps65912-irq.o
obj-$(CONFIG_MFD_TPS65912) += tps65912.o
@@ -71,7 +73,6 @@ obj-$(CONFIG_MFD_TPS80031) += tps80031.o
obj-$(CONFIG_MENELAUS) += menelaus.o
obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o
-obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o
obj-$(CONFIG_MFD_TWL4030_AUDIO) += twl4030-audio.o
obj-$(CONFIG_TWL6040_CORE) += twl6040.o
@@ -150,7 +151,6 @@ obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o
-obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_TPS65090) += tps65090.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
diff --git a/drivers/mfd/adp5520.c b/drivers/mfd/adp5520.c
index 62501553d63c..f495b8b57dd7 100644
--- a/drivers/mfd/adp5520.c
+++ b/drivers/mfd/adp5520.c
@@ -20,7 +20,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
diff --git a/drivers/mfd/as3722.c b/drivers/mfd/as3722.c
index c71ff0af1547..39fa554f13bb 100644
--- a/drivers/mfd/as3722.c
+++ b/drivers/mfd/as3722.c
@@ -277,6 +277,7 @@ static const struct regmap_range as3722_readable_ranges[] = {
regmap_reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC_CONFIGURATION_REG),
regmap_reg_range(AS3722_ASIC_ID1_REG, AS3722_ASIC_ID2_REG),
regmap_reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG),
+ regmap_reg_range(AS3722_FUSE7_REG, AS3722_FUSE7_REG),
};
static const struct regmap_access_table as3722_readable_table = {
diff --git a/drivers/mfd/bcm590xx.c b/drivers/mfd/bcm590xx.c
new file mode 100644
index 000000000000..e9a33c79431b
--- /dev/null
+++ b/drivers/mfd/bcm590xx.c
@@ -0,0 +1,93 @@
+/*
+ * Broadcom BCM590xx PMU
+ *
+ * Copyright 2014 Linaro Limited
+ * Author: Matt Porter <mporter@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/mfd/bcm590xx.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+static const struct mfd_cell bcm590xx_devs[] = {
+ {
+ .name = "bcm590xx-vregs",
+ },
+};
+
+static const struct regmap_config bcm590xx_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = BCM590XX_MAX_REGISTER,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int bcm590xx_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct bcm590xx *bcm590xx;
+ int ret;
+
+ bcm590xx = devm_kzalloc(&i2c->dev, sizeof(*bcm590xx), GFP_KERNEL);
+ if (!bcm590xx)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, bcm590xx);
+ bcm590xx->dev = &i2c->dev;
+ bcm590xx->i2c_client = i2c;
+
+ bcm590xx->regmap = devm_regmap_init_i2c(i2c, &bcm590xx_regmap_config);
+ if (IS_ERR(bcm590xx->regmap)) {
+ ret = PTR_ERR(bcm590xx->regmap);
+ dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = mfd_add_devices(&i2c->dev, -1, bcm590xx_devs,
+ ARRAY_SIZE(bcm590xx_devs), NULL, 0, NULL);
+ if (ret < 0)
+ dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
+
+ return ret;
+}
+
+static const struct of_device_id bcm590xx_of_match[] = {
+ { .compatible = "brcm,bcm59056" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bcm590xx_of_match);
+
+static const struct i2c_device_id bcm590xx_i2c_id[] = {
+ { "bcm59056" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, bcm590xx_i2c_id);
+
+static struct i2c_driver bcm590xx_i2c_driver = {
+ .driver = {
+ .name = "bcm590xx",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(bcm590xx_of_match),
+ },
+ .probe = bcm590xx_i2c_probe,
+ .id_table = bcm590xx_i2c_id,
+};
+module_i2c_driver(bcm590xx_i2c_driver);
+
+MODULE_AUTHOR("Matt Porter <mporter@linaro.org>");
+MODULE_DESCRIPTION("BCM590xx multi-function driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:bcm590xx");
diff --git a/drivers/mfd/cs5535-mfd.c b/drivers/mfd/cs5535-mfd.c
index 17c13012686a..be91cb5d6e78 100644
--- a/drivers/mfd/cs5535-mfd.c
+++ b/drivers/mfd/cs5535-mfd.c
@@ -23,7 +23,6 @@
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/pci.h>
diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c
index 25838f10b35b..e8af816d73a9 100644
--- a/drivers/mfd/da9052-core.c
+++ b/drivers/mfd/da9052-core.c
@@ -279,6 +279,9 @@ static bool da9052_reg_volatile(struct device *dev, unsigned int reg)
case DA9052_EVENT_B_REG:
case DA9052_EVENT_C_REG:
case DA9052_EVENT_D_REG:
+ case DA9052_CONTROL_B_REG:
+ case DA9052_CONTROL_D_REG:
+ case DA9052_SUPPLY_REG:
case DA9052_FAULTLOG_REG:
case DA9052_CHG_TIME_REG:
case DA9052_ADC_RES_L_REG:
diff --git a/drivers/mfd/da9052-i2c.c b/drivers/mfd/da9052-i2c.c
index c319c4ef5d49..6da8ec8ff800 100644
--- a/drivers/mfd/da9052-i2c.c
+++ b/drivers/mfd/da9052-i2c.c
@@ -75,6 +75,7 @@ static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
DA9052_PARK_REGISTER,
&val);
break;
+ case DA9053_BC:
default:
/*
* For other chips parking of I2C register
@@ -114,6 +115,7 @@ static const struct i2c_device_id da9052_i2c_id[] = {
{"da9053-aa", DA9053_AA},
{"da9053-ba", DA9053_BA},
{"da9053-bb", DA9053_BB},
+ {"da9053-bc", DA9053_BC},
{}
};
@@ -121,8 +123,9 @@ static const struct i2c_device_id da9052_i2c_id[] = {
static const struct of_device_id dialog_dt_ids[] = {
{ .compatible = "dlg,da9052", .data = &da9052_i2c_id[0] },
{ .compatible = "dlg,da9053-aa", .data = &da9052_i2c_id[1] },
- { .compatible = "dlg,da9053-ab", .data = &da9052_i2c_id[2] },
+ { .compatible = "dlg,da9053-ba", .data = &da9052_i2c_id[2] },
{ .compatible = "dlg,da9053-bb", .data = &da9052_i2c_id[3] },
+ { .compatible = "dlg,da9053-bc", .data = &da9052_i2c_id[4] },
{ /* sentinel */ }
};
#endif
diff --git a/drivers/mfd/da9052-spi.c b/drivers/mfd/da9052-spi.c
index 0680bcbc53de..17666b40b70c 100644
--- a/drivers/mfd/da9052-spi.c
+++ b/drivers/mfd/da9052-spi.c
@@ -71,6 +71,7 @@ static struct spi_device_id da9052_spi_id[] = {
{"da9053-aa", DA9053_AA},
{"da9053-ba", DA9053_BA},
{"da9053-bb", DA9053_BB},
+ {"da9053-bc", DA9053_BC},
{}
};
diff --git a/drivers/mfd/da9055-i2c.c b/drivers/mfd/da9055-i2c.c
index 8103e4362132..d4d4c165eb95 100644
--- a/drivers/mfd/da9055-i2c.c
+++ b/drivers/mfd/da9055-i2c.c
@@ -15,6 +15,8 @@
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/mfd/da9055/core.h>
@@ -66,6 +68,11 @@ static struct i2c_device_id da9055_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, da9055_i2c_id);
+static const struct of_device_id da9055_of_match[] = {
+ { .compatible = "dlg,da9055-pmic", },
+ { }
+};
+
static struct i2c_driver da9055_i2c_driver = {
.probe = da9055_i2c_probe,
.remove = da9055_i2c_remove,
@@ -73,6 +80,7 @@ static struct i2c_driver da9055_i2c_driver = {
.driver = {
.name = "da9055-pmic",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(da9055_of_match),
},
};
diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
index 26937cd01071..e70ae315abc7 100644
--- a/drivers/mfd/da9063-core.c
+++ b/drivers/mfd/da9063-core.c
@@ -110,7 +110,7 @@ static const struct mfd_cell da9063_devs[] = {
int da9063_device_init(struct da9063 *da9063, unsigned int irq)
{
struct da9063_pdata *pdata = da9063->dev->platform_data;
- int model, revision;
+ int model, variant_id, variant_code;
int ret;
if (pdata) {
@@ -141,23 +141,26 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
return -ENODEV;
}
- ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &revision);
+ ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &variant_id);
if (ret < 0) {
- dev_err(da9063->dev, "Cannot read chip revision id.\n");
+ dev_err(da9063->dev, "Cannot read chip variant id.\n");
return -EIO;
}
- revision >>= DA9063_CHIP_VARIANT_SHIFT;
- if (revision != 3) {
- dev_err(da9063->dev, "Unknown chip revision: %d\n", revision);
+
+ variant_code = variant_id >> DA9063_CHIP_VARIANT_SHIFT;
+
+ dev_info(da9063->dev,
+ "Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n",
+ model, variant_id);
+
+ if (variant_code != PMIC_DA9063_BB) {
+ dev_err(da9063->dev, "Unknown chip variant code: 0x%02X\n",
+ variant_code);
return -ENODEV;
}
da9063->model = model;
- da9063->revision = revision;
-
- dev_info(da9063->dev,
- "Device detected (model-ID: 0x%02X rev-ID: 0x%02X)\n",
- model, revision);
+ da9063->variant_code = variant_code;
ret = da9063_irq_init(da9063);
if (ret) {
diff --git a/drivers/mfd/janz-cmodio.c b/drivers/mfd/janz-cmodio.c
index 81b7d88af313..433f823037dd 100644
--- a/drivers/mfd/janz-cmodio.c
+++ b/drivers/mfd/janz-cmodio.c
@@ -13,7 +13,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index d3e23278d299..07692604e119 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -322,9 +322,12 @@ static int kempld_detect_device(struct kempld_device_data *pld)
return -ENODEV;
}
- /* Release hardware mutex if aquired */
- if (!(index_reg & KEMPLD_MUTEX_KEY))
+ /* Release hardware mutex if acquired */
+ if (!(index_reg & KEMPLD_MUTEX_KEY)) {
iowrite8(KEMPLD_MUTEX_KEY, pld->io_index);
+ /* PXT and COMe-cPC2 boards may require a second release */
+ iowrite8(KEMPLD_MUTEX_KEY, pld->io_index);
+ }
mutex_unlock(&pld->lock);
@@ -438,6 +441,14 @@ static struct dmi_system_id __initdata kempld_dmi_table[] = {
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
}, {
+ .ident = "CHL6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-cHL6"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
.ident = "CHR2",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -510,6 +521,14 @@ static struct dmi_system_id __initdata kempld_dmi_table[] = {
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
}, {
+ .ident = "CVV6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-cBT"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
.ident = "FRI2",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -533,6 +552,14 @@ static struct dmi_system_id __initdata kempld_dmi_table[] = {
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
}, {
+ .ident = "MVV1",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-mBT"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
.ident = "NTC1",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
index be93fa261ded..3f10ea3f45d1 100644
--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -58,7 +58,6 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
@@ -72,9 +71,11 @@
#define ACPIBASE_GPE_END 0x2f
#define ACPIBASE_SMI_OFF 0x30
#define ACPIBASE_SMI_END 0x33
+#define ACPIBASE_PMC_OFF 0x08
+#define ACPIBASE_PMC_END 0x0c
#define ACPIBASE_TCO_OFF 0x60
#define ACPIBASE_TCO_END 0x7f
-#define ACPICTRL 0x44
+#define ACPICTRL_PMCBASE 0x44
#define ACPIBASE_GCS_OFF 0x3410
#define ACPIBASE_GCS_END 0x3414
@@ -90,16 +91,17 @@
#define wdt_mem_res(i) wdt_res(ICH_RES_MEM_OFF, i)
#define wdt_res(b, i) (&wdt_ich_res[(b) + (i)])
-struct lpc_ich_cfg {
- int base;
- int ctrl;
- int save;
-};
-
struct lpc_ich_priv {
int chipset;
- struct lpc_ich_cfg acpi;
- struct lpc_ich_cfg gpio;
+
+ int abase; /* ACPI base */
+ int actrl_pbase; /* ACPI control or PMC base */
+ int gbase; /* GPIO base */
+ int gctrl; /* GPIO control */
+
+ int abase_save; /* Cached ACPI base value */
+ int actrl_pbase_save; /* Cached ACPI control or PMC base value */
+ int gctrl_save; /* Cached GPIO control value */
};
static struct resource wdt_ich_res[] = {
@@ -111,7 +113,7 @@ static struct resource wdt_ich_res[] = {
{
.flags = IORESOURCE_IO,
},
- /* GCS */
+ /* GCS or PMC */
{
.flags = IORESOURCE_MEM,
},
@@ -211,6 +213,7 @@ enum lpc_chipsets {
LPC_LPT_LP, /* Lynx Point-LP */
LPC_WBG, /* Wellsburg */
LPC_AVN, /* Avoton SoC */
+ LPC_BAYTRAIL, /* Bay Trail SoC */
LPC_COLETO, /* Coleto Creek */
LPC_WPT_LP, /* Wildcat Point-LP */
};
@@ -303,6 +306,7 @@ static struct lpc_ich_info lpc_chipset_info[] = {
[LPC_NM10] = {
.name = "NM10",
.iTCO_version = 2,
+ .gpio_version = ICH_V7_GPIO,
},
[LPC_ICH8] = {
.name = "ICH8 or ICH8R",
@@ -499,7 +503,12 @@ static struct lpc_ich_info lpc_chipset_info[] = {
},
[LPC_AVN] = {
.name = "Avoton SoC",
- .iTCO_version = 1,
+ .iTCO_version = 3,
+ .gpio_version = AVOTON_GPIO,
+ },
+ [LPC_BAYTRAIL] = {
+ .name = "Bay Trail SoC",
+ .iTCO_version = 3,
},
[LPC_COLETO] = {
.name = "Coleto Creek",
@@ -726,6 +735,7 @@ static const struct pci_device_id lpc_ich_ids[] = {
{ PCI_VDEVICE(INTEL, 0x1f39), LPC_AVN},
{ PCI_VDEVICE(INTEL, 0x1f3a), LPC_AVN},
{ PCI_VDEVICE(INTEL, 0x1f3b), LPC_AVN},
+ { PCI_VDEVICE(INTEL, 0x0f1c), LPC_BAYTRAIL},
{ PCI_VDEVICE(INTEL, 0x2390), LPC_COLETO},
{ PCI_VDEVICE(INTEL, 0x9cc1), LPC_WPT_LP},
{ PCI_VDEVICE(INTEL, 0x9cc2), LPC_WPT_LP},
@@ -742,14 +752,20 @@ static void lpc_ich_restore_config_space(struct pci_dev *dev)
{
struct lpc_ich_priv *priv = pci_get_drvdata(dev);
- if (priv->acpi.save >= 0) {
- pci_write_config_byte(dev, priv->acpi.ctrl, priv->acpi.save);
- priv->acpi.save = -1;
+ if (priv->abase_save >= 0) {
+ pci_write_config_byte(dev, priv->abase, priv->abase_save);
+ priv->abase_save = -1;
+ }
+
+ if (priv->actrl_pbase_save >= 0) {
+ pci_write_config_byte(dev, priv->actrl_pbase,
+ priv->actrl_pbase_save);
+ priv->actrl_pbase_save = -1;
}
- if (priv->gpio.save >= 0) {
- pci_write_config_byte(dev, priv->gpio.ctrl, priv->gpio.save);
- priv->gpio.save = -1;
+ if (priv->gctrl_save >= 0) {
+ pci_write_config_byte(dev, priv->gctrl, priv->gctrl_save);
+ priv->gctrl_save = -1;
}
}
@@ -758,9 +774,26 @@ static void lpc_ich_enable_acpi_space(struct pci_dev *dev)
struct lpc_ich_priv *priv = pci_get_drvdata(dev);
u8 reg_save;
- pci_read_config_byte(dev, priv->acpi.ctrl, &reg_save);
- pci_write_config_byte(dev, priv->acpi.ctrl, reg_save | 0x10);
- priv->acpi.save = reg_save;
+ switch (lpc_chipset_info[priv->chipset].iTCO_version) {
+ case 3:
+ /*
+ * Some chipsets (eg Avoton) enable the ACPI space in the
+ * ACPI BASE register.
+ */
+ pci_read_config_byte(dev, priv->abase, &reg_save);
+ pci_write_config_byte(dev, priv->abase, reg_save | 0x2);
+ priv->abase_save = reg_save;
+ break;
+ default:
+ /*
+ * Most chipsets enable the ACPI space in the ACPI control
+ * register.
+ */
+ pci_read_config_byte(dev, priv->actrl_pbase, &reg_save);
+ pci_write_config_byte(dev, priv->actrl_pbase, reg_save | 0x80);
+ priv->actrl_pbase_save = reg_save;
+ break;
+ }
}
static void lpc_ich_enable_gpio_space(struct pci_dev *dev)
@@ -768,9 +801,20 @@ static void lpc_ich_enable_gpio_space(struct pci_dev *dev)
struct lpc_ich_priv *priv = pci_get_drvdata(dev);
u8 reg_save;
- pci_read_config_byte(dev, priv->gpio.ctrl, &reg_save);
- pci_write_config_byte(dev, priv->gpio.ctrl, reg_save | 0x10);
- priv->gpio.save = reg_save;
+ pci_read_config_byte(dev, priv->gctrl, &reg_save);
+ pci_write_config_byte(dev, priv->gctrl, reg_save | 0x10);
+ priv->gctrl_save = reg_save;
+}
+
+static void lpc_ich_enable_pmc_space(struct pci_dev *dev)
+{
+ struct lpc_ich_priv *priv = pci_get_drvdata(dev);
+ u8 reg_save;
+
+ pci_read_config_byte(dev, priv->actrl_pbase, &reg_save);
+ pci_write_config_byte(dev, priv->actrl_pbase, reg_save | 0x2);
+
+ priv->actrl_pbase_save = reg_save;
}
static void lpc_ich_finalize_cell(struct pci_dev *dev, struct mfd_cell *cell)
@@ -815,7 +859,7 @@ static int lpc_ich_init_gpio(struct pci_dev *dev)
struct resource *res;
/* Setup power management base register */
- pci_read_config_dword(dev, priv->acpi.base, &base_addr_cfg);
+ pci_read_config_dword(dev, priv->abase, &base_addr_cfg);
base_addr = base_addr_cfg & 0x0000ff80;
if (!base_addr) {
dev_notice(&dev->dev, "I/O space for ACPI uninitialized\n");
@@ -841,7 +885,7 @@ static int lpc_ich_init_gpio(struct pci_dev *dev)
gpe0_done:
/* Setup GPIO base register */
- pci_read_config_dword(dev, priv->gpio.base, &base_addr_cfg);
+ pci_read_config_dword(dev, priv->gbase, &base_addr_cfg);
base_addr = base_addr_cfg & 0x0000ff80;
if (!base_addr) {
dev_notice(&dev->dev, "I/O space for GPIO uninitialized\n");
@@ -891,7 +935,7 @@ static int lpc_ich_init_wdt(struct pci_dev *dev)
struct resource *res;
/* Setup power management base register */
- pci_read_config_dword(dev, priv->acpi.base, &base_addr_cfg);
+ pci_read_config_dword(dev, priv->abase, &base_addr_cfg);
base_addr = base_addr_cfg & 0x0000ff80;
if (!base_addr) {
dev_notice(&dev->dev, "I/O space for ACPI uninitialized\n");
@@ -910,14 +954,20 @@ static int lpc_ich_init_wdt(struct pci_dev *dev)
lpc_ich_enable_acpi_space(dev);
/*
+ * iTCO v2:
* Get the Memory-Mapped GCS register. To get access to it
* we have to read RCBA from PCI Config space 0xf0 and use
* it as base. GCS = RCBA + ICH6_GCS(0x3410).
+ *
+ * iTCO v3:
+ * Get the Power Management Configuration register. To get access
+ * to it we have to read the PMC BASE from config space and address
+ * the register at offset 0x8.
*/
if (lpc_chipset_info[priv->chipset].iTCO_version == 1) {
/* Don't register iomem for TCO ver 1 */
lpc_ich_cells[LPC_WDT].num_resources--;
- } else {
+ } else if (lpc_chipset_info[priv->chipset].iTCO_version == 2) {
pci_read_config_dword(dev, RCBABASE, &base_addr_cfg);
base_addr = base_addr_cfg & 0xffffc000;
if (!(base_addr_cfg & 1)) {
@@ -926,9 +976,17 @@ static int lpc_ich_init_wdt(struct pci_dev *dev)
ret = -ENODEV;
goto wdt_done;
}
- res = wdt_mem_res(ICH_RES_MEM_GCS);
+ res = wdt_mem_res(ICH_RES_MEM_GCS_PMC);
res->start = base_addr + ACPIBASE_GCS_OFF;
res->end = base_addr + ACPIBASE_GCS_END;
+ } else if (lpc_chipset_info[priv->chipset].iTCO_version == 3) {
+ lpc_ich_enable_pmc_space(dev);
+ pci_read_config_dword(dev, ACPICTRL_PMCBASE, &base_addr_cfg);
+ base_addr = base_addr_cfg & 0xfffffe00;
+
+ res = wdt_mem_res(ICH_RES_MEM_GCS_PMC);
+ res->start = base_addr + ACPIBASE_PMC_OFF;
+ res->end = base_addr + ACPIBASE_PMC_END;
}
lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_WDT]);
@@ -952,28 +1010,35 @@ static int lpc_ich_probe(struct pci_dev *dev,
return -ENOMEM;
priv->chipset = id->driver_data;
- priv->acpi.save = -1;
- priv->acpi.base = ACPIBASE;
- priv->acpi.ctrl = ACPICTRL;
- priv->gpio.save = -1;
+ priv->actrl_pbase_save = -1;
+ priv->abase_save = -1;
+
+ priv->abase = ACPIBASE;
+ priv->actrl_pbase = ACPICTRL_PMCBASE;
+
+ priv->gctrl_save = -1;
if (priv->chipset <= LPC_ICH5) {
- priv->gpio.base = GPIOBASE_ICH0;
- priv->gpio.ctrl = GPIOCTRL_ICH0;
+ priv->gbase = GPIOBASE_ICH0;
+ priv->gctrl = GPIOCTRL_ICH0;
} else {
- priv->gpio.base = GPIOBASE_ICH6;
- priv->gpio.ctrl = GPIOCTRL_ICH6;
+ priv->gbase = GPIOBASE_ICH6;
+ priv->gctrl = GPIOCTRL_ICH6;
}
pci_set_drvdata(dev, priv);
- ret = lpc_ich_init_wdt(dev);
- if (!ret)
- cell_added = true;
+ if (lpc_chipset_info[priv->chipset].iTCO_version) {
+ ret = lpc_ich_init_wdt(dev);
+ if (!ret)
+ cell_added = true;
+ }
- ret = lpc_ich_init_gpio(dev);
- if (!ret)
- cell_added = true;
+ if (lpc_chipset_info[priv->chipset].gpio_version) {
+ ret = lpc_ich_init_gpio(dev);
+ if (!ret)
+ cell_added = true;
+ }
/*
* We only care if at least one or none of the cells registered
diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c
index 3bb05c03c68d..4ee755034f3b 100644
--- a/drivers/mfd/lpc_sch.c
+++ b/drivers/mfd/lpc_sch.c
@@ -23,7 +23,6 @@
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c
index 71aa14a6bfbb..5f13cefe8def 100644
--- a/drivers/mfd/max14577.c
+++ b/drivers/mfd/max14577.c
@@ -18,6 +18,7 @@
* This driver is based on max8997.c
*/
+#include <linux/err.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/mfd/core.h>
@@ -25,7 +26,10 @@
#include <linux/mfd/max14577-private.h>
static struct mfd_cell max14577_devs[] = {
- { .name = "max14577-muic", },
+ {
+ .name = "max14577-muic",
+ .of_compatible = "maxim,max14577-muic",
+ },
{
.name = "max14577-regulator",
.of_compatible = "maxim,max14577-regulator",
diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index f53d5823a3f7..e5fce765accb 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -121,6 +121,10 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
dev_info(max77686->dev, "device found\n");
max77686->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
+ if (!max77686->rtc) {
+ dev_err(max77686->dev, "Failed to allocate I2C device for RTC\n");
+ return -ENODEV;
+ }
i2c_set_clientdata(max77686->rtc, max77686);
max77686_irq_init(max77686);
diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
index e0859987ab6b..c5535f018466 100644
--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -148,9 +148,18 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
dev_info(max77693->dev, "device ID: 0x%x\n", reg_data);
max77693->muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC);
+ if (!max77693->muic) {
+ dev_err(max77693->dev, "Failed to allocate I2C device for MUIC\n");
+ return -ENODEV;
+ }
i2c_set_clientdata(max77693->muic, max77693);
max77693->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
+ if (!max77693->haptic) {
+ dev_err(max77693->dev, "Failed to allocate I2C device for Haptic\n");
+ ret = -ENODEV;
+ goto err_i2c_haptic;
+ }
i2c_set_clientdata(max77693->haptic, max77693);
/*
@@ -184,8 +193,9 @@ err_mfd:
max77693_irq_exit(max77693);
err_irq:
err_regmap_muic:
- i2c_unregister_device(max77693->muic);
i2c_unregister_device(max77693->haptic);
+err_i2c_haptic:
+ i2c_unregister_device(max77693->muic);
return ret;
}
diff --git a/drivers/mfd/max8925-i2c.c b/drivers/mfd/max8925-i2c.c
index 176aa26fc787..a83eed5c15ca 100644
--- a/drivers/mfd/max8925-i2c.c
+++ b/drivers/mfd/max8925-i2c.c
@@ -181,9 +181,18 @@ static int max8925_probe(struct i2c_client *client,
mutex_init(&chip->io_lock);
chip->rtc = i2c_new_dummy(chip->i2c->adapter, RTC_I2C_ADDR);
+ if (!chip->rtc) {
+ dev_err(chip->dev, "Failed to allocate I2C device for RTC\n");
+ return -ENODEV;
+ }
i2c_set_clientdata(chip->rtc, chip);
chip->adc = i2c_new_dummy(chip->i2c->adapter, ADC_I2C_ADDR);
+ if (!chip->adc) {
+ dev_err(chip->dev, "Failed to allocate I2C device for ADC\n");
+ i2c_unregister_device(chip->rtc);
+ return -ENODEV;
+ }
i2c_set_clientdata(chip->adc, chip);
device_init_wakeup(&client->dev, 1);
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index 5adede0fb04c..8cf7a015cfe5 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -208,10 +208,26 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
mutex_init(&max8997->iolock);
max8997->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
+ if (!max8997->rtc) {
+ dev_err(max8997->dev, "Failed to allocate I2C device for RTC\n");
+ return -ENODEV;
+ }
i2c_set_clientdata(max8997->rtc, max8997);
+
max8997->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
+ if (!max8997->haptic) {
+ dev_err(max8997->dev, "Failed to allocate I2C device for Haptic\n");
+ ret = -ENODEV;
+ goto err_i2c_haptic;
+ }
i2c_set_clientdata(max8997->haptic, max8997);
+
max8997->muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC);
+ if (!max8997->muic) {
+ dev_err(max8997->dev, "Failed to allocate I2C device for MUIC\n");
+ ret = -ENODEV;
+ goto err_i2c_muic;
+ }
i2c_set_clientdata(max8997->muic, max8997);
pm_runtime_set_active(max8997->dev);
@@ -239,7 +255,9 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
err_mfd:
mfd_remove_devices(max8997->dev);
i2c_unregister_device(max8997->muic);
+err_i2c_muic:
i2c_unregister_device(max8997->haptic);
+err_i2c_haptic:
i2c_unregister_device(max8997->rtc);
return ret;
}
diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c
index 5d5e186b5d8b..592db06098e6 100644
--- a/drivers/mfd/max8998.c
+++ b/drivers/mfd/max8998.c
@@ -215,6 +215,10 @@ static int max8998_i2c_probe(struct i2c_client *i2c,
mutex_init(&max8998->iolock);
max8998->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR);
+ if (!max8998->rtc) {
+ dev_err(&i2c->dev, "Failed to allocate I2C device for RTC\n");
+ return -ENODEV;
+ }
i2c_set_clientdata(max8998->rtc, max8998);
max8998_irq_init(max8998);
diff --git a/drivers/mfd/mc13xxx-spi.c b/drivers/mfd/mc13xxx-spi.c
index 38ab67829791..702925e242c9 100644
--- a/drivers/mfd/mc13xxx-spi.c
+++ b/drivers/mfd/mc13xxx-spi.c
@@ -140,6 +140,11 @@ static int mc13xxx_spi_probe(struct spi_device *spi)
mc13xxx->irq = spi->irq;
+ spi->max_speed_hz = spi->max_speed_hz ? : 26000000;
+ ret = spi_setup(spi);
+ if (ret)
+ return ret;
+
mc13xxx->regmap = devm_regmap_init(&spi->dev, &regmap_mc13xxx_bus,
&spi->dev,
&mc13xxx_regmap_spi_config);
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 41c31b3ac940..29d76986b40b 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -12,7 +12,6 @@
* MCP read/write timeouts from Jordi Colomer, rehacked by rmk.
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/kernel.h>
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 90b630ccc8bc..651e249287dc 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -665,55 +665,78 @@ static int usbhs_omap_probe(struct platform_device *pdev)
goto err_mem;
}
- need_logic_fck = false;
+ /* Set all clocks as invalid to begin with */
+ omap->ehci_logic_fck = ERR_PTR(-ENODEV);
+ omap->init_60m_fclk = ERR_PTR(-ENODEV);
+ omap->utmi_p1_gfclk = ERR_PTR(-ENODEV);
+ omap->utmi_p2_gfclk = ERR_PTR(-ENODEV);
+ omap->xclk60mhsp1_ck = ERR_PTR(-ENODEV);
+ omap->xclk60mhsp2_ck = ERR_PTR(-ENODEV);
+
for (i = 0; i < omap->nports; i++) {
- if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
- is_ehci_hsic_mode(i))
- need_logic_fck |= true;
+ omap->utmi_clk[i] = ERR_PTR(-ENODEV);
+ omap->hsic480m_clk[i] = ERR_PTR(-ENODEV);
+ omap->hsic60m_clk[i] = ERR_PTR(-ENODEV);
}
- omap->ehci_logic_fck = ERR_PTR(-EINVAL);
- if (need_logic_fck) {
- omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
- if (IS_ERR(omap->ehci_logic_fck)) {
- ret = PTR_ERR(omap->ehci_logic_fck);
- dev_dbg(dev, "ehci_logic_fck failed:%d\n", ret);
+ /* for OMAP3 i.e. USBHS REV1 */
+ if (omap->usbhs_rev == OMAP_USBHS_REV1) {
+ need_logic_fck = false;
+ for (i = 0; i < omap->nports; i++) {
+ if (is_ehci_phy_mode(pdata->port_mode[i]) ||
+ is_ehci_tll_mode(pdata->port_mode[i]) ||
+ is_ehci_hsic_mode(pdata->port_mode[i]))
+
+ need_logic_fck |= true;
}
+
+ if (need_logic_fck) {
+ omap->ehci_logic_fck = devm_clk_get(dev,
+ "usbhost_120m_fck");
+ if (IS_ERR(omap->ehci_logic_fck)) {
+ ret = PTR_ERR(omap->ehci_logic_fck);
+ dev_err(dev, "usbhost_120m_fck failed:%d\n",
+ ret);
+ goto err_mem;
+ }
+ }
+ goto initialize;
}
- omap->utmi_p1_gfclk = clk_get(dev, "utmi_p1_gfclk");
+ /* for OMAP4+ i.e. USBHS REV2+ */
+ omap->utmi_p1_gfclk = devm_clk_get(dev, "utmi_p1_gfclk");
if (IS_ERR(omap->utmi_p1_gfclk)) {
ret = PTR_ERR(omap->utmi_p1_gfclk);
dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
- goto err_p1_gfclk;
+ goto err_mem;
}
- omap->utmi_p2_gfclk = clk_get(dev, "utmi_p2_gfclk");
+ omap->utmi_p2_gfclk = devm_clk_get(dev, "utmi_p2_gfclk");
if (IS_ERR(omap->utmi_p2_gfclk)) {
ret = PTR_ERR(omap->utmi_p2_gfclk);
dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
- goto err_p2_gfclk;
+ goto err_mem;
}
- omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
+ omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1");
if (IS_ERR(omap->xclk60mhsp1_ck)) {
ret = PTR_ERR(omap->xclk60mhsp1_ck);
- dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
- goto err_xclk60mhsp1;
+ dev_err(dev, "refclk_60m_ext_p1 failed error:%d\n", ret);
+ goto err_mem;
}
- omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
+ omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2");
if (IS_ERR(omap->xclk60mhsp2_ck)) {
ret = PTR_ERR(omap->xclk60mhsp2_ck);
- dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
- goto err_xclk60mhsp2;
+ dev_err(dev, "refclk_60m_ext_p2 failed error:%d\n", ret);
+ goto err_mem;
}
- omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
+ omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int");
if (IS_ERR(omap->init_60m_fclk)) {
ret = PTR_ERR(omap->init_60m_fclk);
- dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
- goto err_init60m;
+ dev_err(dev, "refclk_60m_int failed error:%d\n", ret);
+ goto err_mem;
}
for (i = 0; i < omap->nports; i++) {
@@ -727,55 +750,72 @@ static int usbhs_omap_probe(struct platform_device *pdev)
* platforms have all clocks and we can function without
* them
*/
- omap->utmi_clk[i] = clk_get(dev, clkname);
- if (IS_ERR(omap->utmi_clk[i]))
- dev_dbg(dev, "Failed to get clock : %s : %ld\n",
- clkname, PTR_ERR(omap->utmi_clk[i]));
+ omap->utmi_clk[i] = devm_clk_get(dev, clkname);
+ if (IS_ERR(omap->utmi_clk[i])) {
+ ret = PTR_ERR(omap->utmi_clk[i]);
+ dev_err(dev, "Failed to get clock : %s : %d\n",
+ clkname, ret);
+ goto err_mem;
+ }
snprintf(clkname, sizeof(clkname),
"usb_host_hs_hsic480m_p%d_clk", i + 1);
- omap->hsic480m_clk[i] = clk_get(dev, clkname);
- if (IS_ERR(omap->hsic480m_clk[i]))
- dev_dbg(dev, "Failed to get clock : %s : %ld\n",
- clkname, PTR_ERR(omap->hsic480m_clk[i]));
+ omap->hsic480m_clk[i] = devm_clk_get(dev, clkname);
+ if (IS_ERR(omap->hsic480m_clk[i])) {
+ ret = PTR_ERR(omap->hsic480m_clk[i]);
+ dev_err(dev, "Failed to get clock : %s : %d\n",
+ clkname, ret);
+ goto err_mem;
+ }
snprintf(clkname, sizeof(clkname),
"usb_host_hs_hsic60m_p%d_clk", i + 1);
- omap->hsic60m_clk[i] = clk_get(dev, clkname);
- if (IS_ERR(omap->hsic60m_clk[i]))
- dev_dbg(dev, "Failed to get clock : %s : %ld\n",
- clkname, PTR_ERR(omap->hsic60m_clk[i]));
+ omap->hsic60m_clk[i] = devm_clk_get(dev, clkname);
+ if (IS_ERR(omap->hsic60m_clk[i])) {
+ ret = PTR_ERR(omap->hsic60m_clk[i]);
+ dev_err(dev, "Failed to get clock : %s : %d\n",
+ clkname, ret);
+ goto err_mem;
+ }
}
if (is_ehci_phy_mode(pdata->port_mode[0])) {
- /* for OMAP3, clk_set_parent fails */
ret = clk_set_parent(omap->utmi_p1_gfclk,
omap->xclk60mhsp1_ck);
- if (ret != 0)
- dev_dbg(dev, "xclk60mhsp1_ck set parent failed: %d\n",
- ret);
+ if (ret != 0) {
+ dev_err(dev, "xclk60mhsp1_ck set parent failed: %d\n",
+ ret);
+ goto err_mem;
+ }
} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
ret = clk_set_parent(omap->utmi_p1_gfclk,
omap->init_60m_fclk);
- if (ret != 0)
- dev_dbg(dev, "P0 init_60m_fclk set parent failed: %d\n",
- ret);
+ if (ret != 0) {
+ dev_err(dev, "P0 init_60m_fclk set parent failed: %d\n",
+ ret);
+ goto err_mem;
+ }
}
if (is_ehci_phy_mode(pdata->port_mode[1])) {
ret = clk_set_parent(omap->utmi_p2_gfclk,
omap->xclk60mhsp2_ck);
- if (ret != 0)
- dev_dbg(dev, "xclk60mhsp2_ck set parent failed: %d\n",
- ret);
+ if (ret != 0) {
+ dev_err(dev, "xclk60mhsp2_ck set parent failed: %d\n",
+ ret);
+ goto err_mem;
+ }
} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
ret = clk_set_parent(omap->utmi_p2_gfclk,
omap->init_60m_fclk);
- if (ret != 0)
- dev_dbg(dev, "P1 init_60m_fclk set parent failed: %d\n",
- ret);
+ if (ret != 0) {
+ dev_err(dev, "P1 init_60m_fclk set parent failed: %d\n",
+ ret);
+ goto err_mem;
+ }
}
+initialize:
omap_usbhs_init(dev);
if (dev->of_node) {
@@ -784,7 +824,7 @@ static int usbhs_omap_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "Failed to create DT children: %d\n", ret);
- goto err_alloc;
+ goto err_mem;
}
} else {
@@ -792,40 +832,12 @@ static int usbhs_omap_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "omap_usbhs_alloc_children failed: %d\n",
ret);
- goto err_alloc;
+ goto err_mem;
}
}
return 0;
-err_alloc:
- for (i = 0; i < omap->nports; i++) {
- if (!IS_ERR(omap->utmi_clk[i]))
- clk_put(omap->utmi_clk[i]);
- if (!IS_ERR(omap->hsic60m_clk[i]))
- clk_put(omap->hsic60m_clk[i]);
- if (!IS_ERR(omap->hsic480m_clk[i]))
- clk_put(omap->hsic480m_clk[i]);
- }
-
- clk_put(omap->init_60m_fclk);
-
-err_init60m:
- clk_put(omap->xclk60mhsp2_ck);
-
-err_xclk60mhsp2:
- clk_put(omap->xclk60mhsp1_ck);
-
-err_xclk60mhsp1:
- clk_put(omap->utmi_p2_gfclk);
-
-err_p2_gfclk:
- clk_put(omap->utmi_p1_gfclk);
-
-err_p1_gfclk:
- if (!IS_ERR(omap->ehci_logic_fck))
- clk_put(omap->ehci_logic_fck);
-
err_mem:
pm_runtime_disable(dev);
@@ -847,27 +859,6 @@ static int usbhs_omap_remove_child(struct device *dev, void *data)
*/
static int usbhs_omap_remove(struct platform_device *pdev)
{
- struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
- int i;
-
- for (i = 0; i < omap->nports; i++) {
- if (!IS_ERR(omap->utmi_clk[i]))
- clk_put(omap->utmi_clk[i]);
- if (!IS_ERR(omap->hsic60m_clk[i]))
- clk_put(omap->hsic60m_clk[i]);
- if (!IS_ERR(omap->hsic480m_clk[i]))
- clk_put(omap->hsic480m_clk[i]);
- }
-
- clk_put(omap->init_60m_fclk);
- clk_put(omap->utmi_p1_gfclk);
- clk_put(omap->utmi_p2_gfclk);
- clk_put(omap->xclk60mhsp2_ck);
- clk_put(omap->xclk60mhsp1_ck);
-
- if (!IS_ERR(omap->ehci_logic_fck))
- clk_put(omap->ehci_logic_fck);
-
pm_runtime_disable(&pdev->dev);
/* remove children */
diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 5ee50f779ef6..532eacab6b46 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -252,7 +252,7 @@ static int usbtll_omap_probe(struct platform_device *pdev)
break;
}
- tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk * [tll->nch]),
+ tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk *) * tll->nch,
GFP_KERNEL);
if (!tll->ch_clk) {
ret = -ENOMEM;
diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c
index b8941a556d71..c1984b0d1b65 100644
--- a/drivers/mfd/pcf50633-adc.c
+++ b/drivers/mfd/pcf50633-adc.c
@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/completion.h>
diff --git a/drivers/mfd/pm8921-core.c b/drivers/mfd/pm8921-core.c
index 484fe66e6c88..b97a97187ae9 100644
--- a/drivers/mfd/pm8921-core.c
+++ b/drivers/mfd/pm8921-core.c
@@ -14,23 +14,316 @@
#define pr_fmt(fmt) "%s: " fmt, __func__
#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/ssbi.h>
+#include <linux/regmap.h>
+#include <linux/of_platform.h>
#include <linux/mfd/core.h>
-#include <linux/mfd/pm8xxx/pm8921.h>
#include <linux/mfd/pm8xxx/core.h>
+#define SSBI_REG_ADDR_IRQ_BASE 0x1BB
+
+#define SSBI_REG_ADDR_IRQ_ROOT (SSBI_REG_ADDR_IRQ_BASE + 0)
+#define SSBI_REG_ADDR_IRQ_M_STATUS1 (SSBI_REG_ADDR_IRQ_BASE + 1)
+#define SSBI_REG_ADDR_IRQ_M_STATUS2 (SSBI_REG_ADDR_IRQ_BASE + 2)
+#define SSBI_REG_ADDR_IRQ_M_STATUS3 (SSBI_REG_ADDR_IRQ_BASE + 3)
+#define SSBI_REG_ADDR_IRQ_M_STATUS4 (SSBI_REG_ADDR_IRQ_BASE + 4)
+#define SSBI_REG_ADDR_IRQ_BLK_SEL (SSBI_REG_ADDR_IRQ_BASE + 5)
+#define SSBI_REG_ADDR_IRQ_IT_STATUS (SSBI_REG_ADDR_IRQ_BASE + 6)
+#define SSBI_REG_ADDR_IRQ_CONFIG (SSBI_REG_ADDR_IRQ_BASE + 7)
+#define SSBI_REG_ADDR_IRQ_RT_STATUS (SSBI_REG_ADDR_IRQ_BASE + 8)
+
+#define PM_IRQF_LVL_SEL 0x01 /* level select */
+#define PM_IRQF_MASK_FE 0x02 /* mask falling edge */
+#define PM_IRQF_MASK_RE 0x04 /* mask rising edge */
+#define PM_IRQF_CLR 0x08 /* clear interrupt */
+#define PM_IRQF_BITS_MASK 0x70
+#define PM_IRQF_BITS_SHIFT 4
+#define PM_IRQF_WRITE 0x80
+
+#define PM_IRQF_MASK_ALL (PM_IRQF_MASK_FE | \
+ PM_IRQF_MASK_RE)
+
#define REG_HWREV 0x002 /* PMIC4 revision */
#define REG_HWREV_2 0x0E8 /* PMIC4 revision 2 */
+#define PM8921_NR_IRQS 256
+
+struct pm_irq_chip {
+ struct device *dev;
+ struct regmap *regmap;
+ spinlock_t pm_irq_lock;
+ struct irq_domain *irqdomain;
+ unsigned int num_irqs;
+ unsigned int num_blocks;
+ unsigned int num_masters;
+ u8 config[0];
+};
+
struct pm8921 {
struct device *dev;
struct pm_irq_chip *irq_chip;
};
+static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, unsigned int bp,
+ unsigned int *ip)
+{
+ int rc;
+
+ spin_lock(&chip->pm_irq_lock);
+ rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, bp);
+ if (rc) {
+ pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);
+ goto bail;
+ }
+
+ rc = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_IT_STATUS, ip);
+ if (rc)
+ pr_err("Failed Reading Status rc=%d\n", rc);
+bail:
+ spin_unlock(&chip->pm_irq_lock);
+ return rc;
+}
+
+static int
+pm8xxx_config_irq(struct pm_irq_chip *chip, unsigned int bp, unsigned int cp)
+{
+ int rc;
+
+ spin_lock(&chip->pm_irq_lock);
+ rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, bp);
+ if (rc) {
+ pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);
+ goto bail;
+ }
+
+ cp |= PM_IRQF_WRITE;
+ rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_CONFIG, cp);
+ if (rc)
+ pr_err("Failed Configuring IRQ rc=%d\n", rc);
+bail:
+ spin_unlock(&chip->pm_irq_lock);
+ return rc;
+}
+
+static int pm8xxx_irq_block_handler(struct pm_irq_chip *chip, int block)
+{
+ int pmirq, irq, i, ret = 0;
+ unsigned int bits;
+
+ ret = pm8xxx_read_block_irq(chip, block, &bits);
+ if (ret) {
+ pr_err("Failed reading %d block ret=%d", block, ret);
+ return ret;
+ }
+ if (!bits) {
+ pr_err("block bit set in master but no irqs: %d", block);
+ return 0;
+ }
+
+ /* Check IRQ bits */
+ for (i = 0; i < 8; i++) {
+ if (bits & (1 << i)) {
+ pmirq = block * 8 + i;
+ irq = irq_find_mapping(chip->irqdomain, pmirq);
+ generic_handle_irq(irq);
+ }
+ }
+ return 0;
+}
+
+static int pm8xxx_irq_master_handler(struct pm_irq_chip *chip, int master)
+{
+ unsigned int blockbits;
+ int block_number, i, ret = 0;
+
+ ret = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_M_STATUS1 + master,
+ &blockbits);
+ if (ret) {
+ pr_err("Failed to read master %d ret=%d\n", master, ret);
+ return ret;
+ }
+ if (!blockbits) {
+ pr_err("master bit set in root but no blocks: %d", master);
+ return 0;
+ }
+
+ for (i = 0; i < 8; i++)
+ if (blockbits & (1 << i)) {
+ block_number = master * 8 + i; /* block # */
+ ret |= pm8xxx_irq_block_handler(chip, block_number);
+ }
+ return ret;
+}
+
+static void pm8xxx_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct pm_irq_chip *chip = irq_desc_get_handler_data(desc);
+ struct irq_chip *irq_chip = irq_desc_get_chip(desc);
+ unsigned int root;
+ int i, ret, masters = 0;
+
+ chained_irq_enter(irq_chip, desc);
+
+ ret = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_ROOT, &root);
+ if (ret) {
+ pr_err("Can't read root status ret=%d\n", ret);
+ return;
+ }
+
+ /* on pm8xxx series masters start from bit 1 of the root */
+ masters = root >> 1;
+
+ /* Read allowed masters for blocks. */
+ for (i = 0; i < chip->num_masters; i++)
+ if (masters & (1 << i))
+ pm8xxx_irq_master_handler(chip, i);
+
+ chained_irq_exit(irq_chip, desc);
+}
+
+static void pm8xxx_irq_mask_ack(struct irq_data *d)
+{
+ struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
+ unsigned int pmirq = irqd_to_hwirq(d);
+ int irq_bit;
+ u8 block, config;
+
+ block = pmirq / 8;
+ irq_bit = pmirq % 8;
+
+ config = chip->config[pmirq] | PM_IRQF_MASK_ALL | PM_IRQF_CLR;
+ pm8xxx_config_irq(chip, block, config);
+}
+
+static void pm8xxx_irq_unmask(struct irq_data *d)
+{
+ struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
+ unsigned int pmirq = irqd_to_hwirq(d);
+ int irq_bit;
+ u8 block, config;
+
+ block = pmirq / 8;
+ irq_bit = pmirq % 8;
+
+ config = chip->config[pmirq];
+ pm8xxx_config_irq(chip, block, config);
+}
+
+static int pm8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
+{
+ struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
+ unsigned int pmirq = irqd_to_hwirq(d);
+ int irq_bit;
+ u8 block, config;
+
+ block = pmirq / 8;
+ irq_bit = pmirq % 8;
+
+ chip->config[pmirq] = (irq_bit << PM_IRQF_BITS_SHIFT)
+ | PM_IRQF_MASK_ALL;
+ if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
+ if (flow_type & IRQF_TRIGGER_RISING)
+ chip->config[pmirq] &= ~PM_IRQF_MASK_RE;
+ if (flow_type & IRQF_TRIGGER_FALLING)
+ chip->config[pmirq] &= ~PM_IRQF_MASK_FE;
+ } else {
+ chip->config[pmirq] |= PM_IRQF_LVL_SEL;
+
+ if (flow_type & IRQF_TRIGGER_HIGH)
+ chip->config[pmirq] &= ~PM_IRQF_MASK_RE;
+ else
+ chip->config[pmirq] &= ~PM_IRQF_MASK_FE;
+ }
+
+ config = chip->config[pmirq] | PM_IRQF_CLR;
+ return pm8xxx_config_irq(chip, block, config);
+}
+
+static struct irq_chip pm8xxx_irq_chip = {
+ .name = "pm8xxx",
+ .irq_mask_ack = pm8xxx_irq_mask_ack,
+ .irq_unmask = pm8xxx_irq_unmask,
+ .irq_set_type = pm8xxx_irq_set_type,
+ .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
+};
+
+/**
+ * pm8xxx_get_irq_stat - get the status of the irq line
+ * @chip: pointer to identify a pmic irq controller
+ * @irq: the irq number
+ *
+ * The pm8xxx gpio and mpp rely on the interrupt block to read
+ * the values on their pins. This function is to facilitate reading
+ * the status of a gpio or an mpp line. The caller has to convert the
+ * gpio number to irq number.
+ *
+ * RETURNS:
+ * an int indicating the value read on that line
+ */
+static int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq)
+{
+ int pmirq, rc;
+ unsigned int block, bits, bit;
+ unsigned long flags;
+ struct irq_data *irq_data = irq_get_irq_data(irq);
+
+ pmirq = irq_data->hwirq;
+
+ block = pmirq / 8;
+ bit = pmirq % 8;
+
+ spin_lock_irqsave(&chip->pm_irq_lock, flags);
+
+ rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, block);
+ if (rc) {
+ pr_err("Failed Selecting block irq=%d pmirq=%d blk=%d rc=%d\n",
+ irq, pmirq, block, rc);
+ goto bail_out;
+ }
+
+ rc = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_RT_STATUS, &bits);
+ if (rc) {
+ pr_err("Failed Configuring irq=%d pmirq=%d blk=%d rc=%d\n",
+ irq, pmirq, block, rc);
+ goto bail_out;
+ }
+
+ rc = (bits & (1 << bit)) ? 1 : 0;
+
+bail_out:
+ spin_unlock_irqrestore(&chip->pm_irq_lock, flags);
+
+ return rc;
+}
+
+static int pm8xxx_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ struct pm_irq_chip *chip = d->host_data;
+
+ irq_set_chip_and_handler(irq, &pm8xxx_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, chip);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ irq_set_noprobe(irq);
+#endif
+ return 0;
+}
+
+static const struct irq_domain_ops pm8xxx_irq_domain_ops = {
+ .xlate = irq_domain_xlate_twocell,
+ .map = pm8xxx_irq_domain_map,
+};
+
static int pm8921_readb(const struct device *dev, u16 addr, u8 *val)
{
const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
@@ -81,42 +374,35 @@ static struct pm8xxx_drvdata pm8921_drvdata = {
.pmic_read_irq_stat = pm8921_read_irq_stat,
};
-static int pm8921_add_subdevices(const struct pm8921_platform_data
- *pdata,
- struct pm8921 *pmic,
- u32 rev)
-{
- int ret = 0, irq_base = 0;
- struct pm_irq_chip *irq_chip;
-
- if (pdata->irq_pdata) {
- pdata->irq_pdata->irq_cdata.nirqs = PM8921_NR_IRQS;
- pdata->irq_pdata->irq_cdata.rev = rev;
- irq_base = pdata->irq_pdata->irq_base;
- irq_chip = pm8xxx_irq_init(pmic->dev, pdata->irq_pdata);
+static const struct regmap_config ssbi_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .max_register = 0x3ff,
+ .fast_io = true,
+ .reg_read = ssbi_reg_read,
+ .reg_write = ssbi_reg_write
+};
- if (IS_ERR(irq_chip)) {
- pr_err("Failed to init interrupts ret=%ld\n",
- PTR_ERR(irq_chip));
- return PTR_ERR(irq_chip);
- }
- pmic->irq_chip = irq_chip;
- }
- return ret;
-}
+static const struct of_device_id pm8921_id_table[] = {
+ { .compatible = "qcom,pm8058", },
+ { .compatible = "qcom,pm8921", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pm8921_id_table);
static int pm8921_probe(struct platform_device *pdev)
{
- const struct pm8921_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct pm8921 *pmic;
- int rc;
- u8 val;
+ struct regmap *regmap;
+ int irq, rc;
+ unsigned int val;
u32 rev;
+ struct pm_irq_chip *chip;
+ unsigned int nirqs = PM8921_NR_IRQS;
- if (!pdata) {
- pr_err("missing platform data\n");
- return -EINVAL;
- }
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
pmic = devm_kzalloc(&pdev->dev, sizeof(struct pm8921), GFP_KERNEL);
if (!pmic) {
@@ -124,8 +410,13 @@ static int pm8921_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ regmap = devm_regmap_init(&pdev->dev, NULL, pdev->dev.parent,
+ &ssbi_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
/* Read PMIC chip revision */
- rc = ssbi_read(pdev->dev.parent, REG_HWREV, &val, sizeof(val));
+ rc = regmap_read(regmap, REG_HWREV, &val);
if (rc) {
pr_err("Failed to read hw rev reg %d:rc=%d\n", REG_HWREV, rc);
return rc;
@@ -134,7 +425,7 @@ static int pm8921_probe(struct platform_device *pdev)
rev = val;
/* Read PMIC chip revision 2 */
- rc = ssbi_read(pdev->dev.parent, REG_HWREV_2, &val, sizeof(val));
+ rc = regmap_read(regmap, REG_HWREV_2, &val);
if (rc) {
pr_err("Failed to read hw rev 2 reg %d:rc=%d\n",
REG_HWREV_2, rc);
@@ -147,37 +438,56 @@ static int pm8921_probe(struct platform_device *pdev)
pm8921_drvdata.pm_chip_data = pmic;
platform_set_drvdata(pdev, &pm8921_drvdata);
- rc = pm8921_add_subdevices(pdata, pmic, rev);
+ chip = devm_kzalloc(&pdev->dev, sizeof(*chip) +
+ sizeof(chip->config[0]) * nirqs,
+ GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ pmic->irq_chip = chip;
+ chip->dev = &pdev->dev;
+ chip->regmap = regmap;
+ chip->num_irqs = nirqs;
+ chip->num_blocks = DIV_ROUND_UP(chip->num_irqs, 8);
+ chip->num_masters = DIV_ROUND_UP(chip->num_blocks, 8);
+ spin_lock_init(&chip->pm_irq_lock);
+
+ chip->irqdomain = irq_domain_add_linear(pdev->dev.of_node, nirqs,
+ &pm8xxx_irq_domain_ops,
+ chip);
+ if (!chip->irqdomain)
+ return -ENODEV;
+
+ irq_set_handler_data(irq, chip);
+ irq_set_chained_handler(irq, pm8xxx_irq_handler);
+ irq_set_irq_wake(irq, 1);
+
+ rc = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
if (rc) {
- pr_err("Cannot add subdevices rc=%d\n", rc);
- goto err;
+ irq_set_chained_handler(irq, NULL);
+ irq_set_handler_data(irq, NULL);
+ irq_domain_remove(chip->irqdomain);
}
- /* gpio might not work if no irq device is found */
- WARN_ON(pmic->irq_chip == NULL);
+ return rc;
+}
+static int pm8921_remove_child(struct device *dev, void *unused)
+{
+ platform_device_unregister(to_platform_device(dev));
return 0;
-
-err:
- mfd_remove_devices(pmic->dev);
- return rc;
}
static int pm8921_remove(struct platform_device *pdev)
{
- struct pm8xxx_drvdata *drvdata;
- struct pm8921 *pmic = NULL;
-
- drvdata = platform_get_drvdata(pdev);
- if (drvdata)
- pmic = drvdata->pm_chip_data;
- if (pmic) {
- mfd_remove_devices(pmic->dev);
- if (pmic->irq_chip) {
- pm8xxx_irq_exit(pmic->irq_chip);
- pmic->irq_chip = NULL;
- }
- }
+ int irq = platform_get_irq(pdev, 0);
+ struct pm8921 *pmic = pm8921_drvdata.pm_chip_data;
+ struct pm_irq_chip *chip = pmic->irq_chip;
+
+ device_for_each_child(&pdev->dev, NULL, pm8921_remove_child);
+ irq_set_chained_handler(irq, NULL);
+ irq_set_handler_data(irq, NULL);
+ irq_domain_remove(chip->irqdomain);
return 0;
}
@@ -188,6 +498,7 @@ static struct platform_driver pm8921_driver = {
.driver = {
.name = "pm8921-core",
.owner = THIS_MODULE,
+ .of_match_table = pm8921_id_table,
},
};
diff --git a/drivers/mfd/pm8xxx-irq.c b/drivers/mfd/pm8xxx-irq.c
deleted file mode 100644
index 1360e20adf11..000000000000
--- a/drivers/mfd/pm8xxx-irq.c
+++ /dev/null
@@ -1,371 +0,0 @@
-/*
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/mfd/pm8xxx/core.h>
-#include <linux/mfd/pm8xxx/irq.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-/* PMIC8xxx IRQ */
-
-#define SSBI_REG_ADDR_IRQ_BASE 0x1BB
-
-#define SSBI_REG_ADDR_IRQ_ROOT (SSBI_REG_ADDR_IRQ_BASE + 0)
-#define SSBI_REG_ADDR_IRQ_M_STATUS1 (SSBI_REG_ADDR_IRQ_BASE + 1)
-#define SSBI_REG_ADDR_IRQ_M_STATUS2 (SSBI_REG_ADDR_IRQ_BASE + 2)
-#define SSBI_REG_ADDR_IRQ_M_STATUS3 (SSBI_REG_ADDR_IRQ_BASE + 3)
-#define SSBI_REG_ADDR_IRQ_M_STATUS4 (SSBI_REG_ADDR_IRQ_BASE + 4)
-#define SSBI_REG_ADDR_IRQ_BLK_SEL (SSBI_REG_ADDR_IRQ_BASE + 5)
-#define SSBI_REG_ADDR_IRQ_IT_STATUS (SSBI_REG_ADDR_IRQ_BASE + 6)
-#define SSBI_REG_ADDR_IRQ_CONFIG (SSBI_REG_ADDR_IRQ_BASE + 7)
-#define SSBI_REG_ADDR_IRQ_RT_STATUS (SSBI_REG_ADDR_IRQ_BASE + 8)
-
-#define PM_IRQF_LVL_SEL 0x01 /* level select */
-#define PM_IRQF_MASK_FE 0x02 /* mask falling edge */
-#define PM_IRQF_MASK_RE 0x04 /* mask rising edge */
-#define PM_IRQF_CLR 0x08 /* clear interrupt */
-#define PM_IRQF_BITS_MASK 0x70
-#define PM_IRQF_BITS_SHIFT 4
-#define PM_IRQF_WRITE 0x80
-
-#define PM_IRQF_MASK_ALL (PM_IRQF_MASK_FE | \
- PM_IRQF_MASK_RE)
-
-struct pm_irq_chip {
- struct device *dev;
- spinlock_t pm_irq_lock;
- unsigned int devirq;
- unsigned int irq_base;
- unsigned int num_irqs;
- unsigned int num_blocks;
- unsigned int num_masters;
- u8 config[0];
-};
-
-static int pm8xxx_read_root_irq(const struct pm_irq_chip *chip, u8 *rp)
-{
- return pm8xxx_readb(chip->dev, SSBI_REG_ADDR_IRQ_ROOT, rp);
-}
-
-static int pm8xxx_read_master_irq(const struct pm_irq_chip *chip, u8 m, u8 *bp)
-{
- return pm8xxx_readb(chip->dev,
- SSBI_REG_ADDR_IRQ_M_STATUS1 + m, bp);
-}
-
-static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, u8 bp, u8 *ip)
-{
- int rc;
-
- spin_lock(&chip->pm_irq_lock);
- rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_BLK_SEL, bp);
- if (rc) {
- pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);
- goto bail;
- }
-
- rc = pm8xxx_readb(chip->dev, SSBI_REG_ADDR_IRQ_IT_STATUS, ip);
- if (rc)
- pr_err("Failed Reading Status rc=%d\n", rc);
-bail:
- spin_unlock(&chip->pm_irq_lock);
- return rc;
-}
-
-static int pm8xxx_config_irq(struct pm_irq_chip *chip, u8 bp, u8 cp)
-{
- int rc;
-
- spin_lock(&chip->pm_irq_lock);
- rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_BLK_SEL, bp);
- if (rc) {
- pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);
- goto bail;
- }
-
- cp |= PM_IRQF_WRITE;
- rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_CONFIG, cp);
- if (rc)
- pr_err("Failed Configuring IRQ rc=%d\n", rc);
-bail:
- spin_unlock(&chip->pm_irq_lock);
- return rc;
-}
-
-static int pm8xxx_irq_block_handler(struct pm_irq_chip *chip, int block)
-{
- int pmirq, irq, i, ret = 0;
- u8 bits;
-
- ret = pm8xxx_read_block_irq(chip, block, &bits);
- if (ret) {
- pr_err("Failed reading %d block ret=%d", block, ret);
- return ret;
- }
- if (!bits) {
- pr_err("block bit set in master but no irqs: %d", block);
- return 0;
- }
-
- /* Check IRQ bits */
- for (i = 0; i < 8; i++) {
- if (bits & (1 << i)) {
- pmirq = block * 8 + i;
- irq = pmirq + chip->irq_base;
- generic_handle_irq(irq);
- }
- }
- return 0;
-}
-
-static int pm8xxx_irq_master_handler(struct pm_irq_chip *chip, int master)
-{
- u8 blockbits;
- int block_number, i, ret = 0;
-
- ret = pm8xxx_read_master_irq(chip, master, &blockbits);
- if (ret) {
- pr_err("Failed to read master %d ret=%d\n", master, ret);
- return ret;
- }
- if (!blockbits) {
- pr_err("master bit set in root but no blocks: %d", master);
- return 0;
- }
-
- for (i = 0; i < 8; i++)
- if (blockbits & (1 << i)) {
- block_number = master * 8 + i; /* block # */
- ret |= pm8xxx_irq_block_handler(chip, block_number);
- }
- return ret;
-}
-
-static void pm8xxx_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- struct pm_irq_chip *chip = irq_desc_get_handler_data(desc);
- struct irq_chip *irq_chip = irq_desc_get_chip(desc);
- u8 root;
- int i, ret, masters = 0;
-
- ret = pm8xxx_read_root_irq(chip, &root);
- if (ret) {
- pr_err("Can't read root status ret=%d\n", ret);
- return;
- }
-
- /* on pm8xxx series masters start from bit 1 of the root */
- masters = root >> 1;
-
- /* Read allowed masters for blocks. */
- for (i = 0; i < chip->num_masters; i++)
- if (masters & (1 << i))
- pm8xxx_irq_master_handler(chip, i);
-
- irq_chip->irq_ack(&desc->irq_data);
-}
-
-static void pm8xxx_irq_mask_ack(struct irq_data *d)
-{
- struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
- unsigned int pmirq = d->irq - chip->irq_base;
- int master, irq_bit;
- u8 block, config;
-
- block = pmirq / 8;
- master = block / 8;
- irq_bit = pmirq % 8;
-
- config = chip->config[pmirq] | PM_IRQF_MASK_ALL | PM_IRQF_CLR;
- pm8xxx_config_irq(chip, block, config);
-}
-
-static void pm8xxx_irq_unmask(struct irq_data *d)
-{
- struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
- unsigned int pmirq = d->irq - chip->irq_base;
- int master, irq_bit;
- u8 block, config;
-
- block = pmirq / 8;
- master = block / 8;
- irq_bit = pmirq % 8;
-
- config = chip->config[pmirq];
- pm8xxx_config_irq(chip, block, config);
-}
-
-static int pm8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
- struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
- unsigned int pmirq = d->irq - chip->irq_base;
- int master, irq_bit;
- u8 block, config;
-
- block = pmirq / 8;
- master = block / 8;
- irq_bit = pmirq % 8;
-
- chip->config[pmirq] = (irq_bit << PM_IRQF_BITS_SHIFT)
- | PM_IRQF_MASK_ALL;
- if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
- if (flow_type & IRQF_TRIGGER_RISING)
- chip->config[pmirq] &= ~PM_IRQF_MASK_RE;
- if (flow_type & IRQF_TRIGGER_FALLING)
- chip->config[pmirq] &= ~PM_IRQF_MASK_FE;
- } else {
- chip->config[pmirq] |= PM_IRQF_LVL_SEL;
-
- if (flow_type & IRQF_TRIGGER_HIGH)
- chip->config[pmirq] &= ~PM_IRQF_MASK_RE;
- else
- chip->config[pmirq] &= ~PM_IRQF_MASK_FE;
- }
-
- config = chip->config[pmirq] | PM_IRQF_CLR;
- return pm8xxx_config_irq(chip, block, config);
-}
-
-static int pm8xxx_irq_set_wake(struct irq_data *d, unsigned int on)
-{
- return 0;
-}
-
-static struct irq_chip pm8xxx_irq_chip = {
- .name = "pm8xxx",
- .irq_mask_ack = pm8xxx_irq_mask_ack,
- .irq_unmask = pm8xxx_irq_unmask,
- .irq_set_type = pm8xxx_irq_set_type,
- .irq_set_wake = pm8xxx_irq_set_wake,
- .flags = IRQCHIP_MASK_ON_SUSPEND,
-};
-
-/**
- * pm8xxx_get_irq_stat - get the status of the irq line
- * @chip: pointer to identify a pmic irq controller
- * @irq: the irq number
- *
- * The pm8xxx gpio and mpp rely on the interrupt block to read
- * the values on their pins. This function is to facilitate reading
- * the status of a gpio or an mpp line. The caller has to convert the
- * gpio number to irq number.
- *
- * RETURNS:
- * an int indicating the value read on that line
- */
-int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq)
-{
- int pmirq, rc;
- u8 block, bits, bit;
- unsigned long flags;
-
- if (chip == NULL || irq < chip->irq_base ||
- irq >= chip->irq_base + chip->num_irqs)
- return -EINVAL;
-
- pmirq = irq - chip->irq_base;
-
- block = pmirq / 8;
- bit = pmirq % 8;
-
- spin_lock_irqsave(&chip->pm_irq_lock, flags);
-
- rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_BLK_SEL, block);
- if (rc) {
- pr_err("Failed Selecting block irq=%d pmirq=%d blk=%d rc=%d\n",
- irq, pmirq, block, rc);
- goto bail_out;
- }
-
- rc = pm8xxx_readb(chip->dev, SSBI_REG_ADDR_IRQ_RT_STATUS, &bits);
- if (rc) {
- pr_err("Failed Configuring irq=%d pmirq=%d blk=%d rc=%d\n",
- irq, pmirq, block, rc);
- goto bail_out;
- }
-
- rc = (bits & (1 << bit)) ? 1 : 0;
-
-bail_out:
- spin_unlock_irqrestore(&chip->pm_irq_lock, flags);
-
- return rc;
-}
-EXPORT_SYMBOL_GPL(pm8xxx_get_irq_stat);
-
-struct pm_irq_chip * pm8xxx_irq_init(struct device *dev,
- const struct pm8xxx_irq_platform_data *pdata)
-{
- struct pm_irq_chip *chip;
- int devirq, rc;
- unsigned int pmirq;
-
- if (!pdata) {
- pr_err("No platform data\n");
- return ERR_PTR(-EINVAL);
- }
-
- devirq = pdata->devirq;
- if (devirq < 0) {
- pr_err("missing devirq\n");
- rc = devirq;
- return ERR_PTR(-EINVAL);
- }
-
- chip = kzalloc(sizeof(struct pm_irq_chip)
- + sizeof(u8) * pdata->irq_cdata.nirqs, GFP_KERNEL);
- if (!chip) {
- pr_err("Cannot alloc pm_irq_chip struct\n");
- return ERR_PTR(-EINVAL);
- }
-
- chip->dev = dev;
- chip->devirq = devirq;
- chip->irq_base = pdata->irq_base;
- chip->num_irqs = pdata->irq_cdata.nirqs;
- chip->num_blocks = DIV_ROUND_UP(chip->num_irqs, 8);
- chip->num_masters = DIV_ROUND_UP(chip->num_blocks, 8);
- spin_lock_init(&chip->pm_irq_lock);
-
- for (pmirq = 0; pmirq < chip->num_irqs; pmirq++) {
- irq_set_chip_and_handler(chip->irq_base + pmirq,
- &pm8xxx_irq_chip,
- handle_level_irq);
- irq_set_chip_data(chip->irq_base + pmirq, chip);
-#ifdef CONFIG_ARM
- set_irq_flags(chip->irq_base + pmirq, IRQF_VALID);
-#else
- irq_set_noprobe(chip->irq_base + pmirq);
-#endif
- }
-
- irq_set_irq_type(devirq, pdata->irq_trigger_flag);
- irq_set_handler_data(devirq, chip);
- irq_set_chained_handler(devirq, pm8xxx_irq_handler);
- set_irq_wake(devirq, 1);
-
- return chip;
-}
-
-int pm8xxx_irq_exit(struct pm_irq_chip *chip)
-{
- irq_set_chained_handler(chip->devirq, NULL);
- kfree(chip);
- return 0;
-}
diff --git a/drivers/mfd/rc5t583-irq.c b/drivers/mfd/rc5t583-irq.c
index b41db5968706..bb8502020274 100644
--- a/drivers/mfd/rc5t583-irq.c
+++ b/drivers/mfd/rc5t583-irq.c
@@ -22,7 +22,6 @@
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/mfd/rc5t583.h>
diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c
index d346146249a2..c79569750be9 100644
--- a/drivers/mfd/rdc321x-southbridge.c
+++ b/drivers/mfd/rdc321x-southbridge.c
@@ -19,7 +19,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
diff --git a/drivers/mfd/retu-mfd.c b/drivers/mfd/retu-mfd.c
index c8f345f7e9a2..663f8a37aa6b 100644
--- a/drivers/mfd/retu-mfd.c
+++ b/drivers/mfd/retu-mfd.c
@@ -19,7 +19,6 @@
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/irq.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/module.h>
diff --git a/drivers/mfd/rtsx_usb.c b/drivers/mfd/rtsx_usb.c
new file mode 100644
index 000000000000..b53b9d46cc45
--- /dev/null
+++ b/drivers/mfd/rtsx_usb.c
@@ -0,0 +1,760 @@
+/* Driver for Realtek USB card reader
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Roger Tseng <rogerable@realtek.com>
+ */
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/usb.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rtsx_usb.h>
+
+static int polling_pipe = 1;
+module_param(polling_pipe, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(polling_pipe, "polling pipe (0: ctl, 1: bulk)");
+
+static struct mfd_cell rtsx_usb_cells[] = {
+ [RTSX_USB_SD_CARD] = {
+ .name = "rtsx_usb_sdmmc",
+ .pdata_size = 0,
+ },
+ [RTSX_USB_MS_CARD] = {
+ .name = "rtsx_usb_ms",
+ .pdata_size = 0,
+ },
+};
+
+static void rtsx_usb_sg_timed_out(unsigned long data)
+{
+ struct rtsx_ucr *ucr = (struct rtsx_ucr *)data;
+
+ dev_dbg(&ucr->pusb_intf->dev, "%s: sg transfer timed out", __func__);
+ usb_sg_cancel(&ucr->current_sg);
+
+ /* we know the cancellation is caused by time-out */
+ ucr->current_sg.status = -ETIMEDOUT;
+}
+
+static int rtsx_usb_bulk_transfer_sglist(struct rtsx_ucr *ucr,
+ unsigned int pipe, struct scatterlist *sg, int num_sg,
+ unsigned int length, unsigned int *act_len, int timeout)
+{
+ int ret;
+
+ dev_dbg(&ucr->pusb_intf->dev, "%s: xfer %u bytes, %d entries\n",
+ __func__, length, num_sg);
+ ret = usb_sg_init(&ucr->current_sg, ucr->pusb_dev, pipe, 0,
+ sg, num_sg, length, GFP_NOIO);
+ if (ret)
+ return ret;
+
+ ucr->sg_timer.expires = jiffies + msecs_to_jiffies(timeout);
+ add_timer(&ucr->sg_timer);
+ usb_sg_wait(&ucr->current_sg);
+ del_timer(&ucr->sg_timer);
+
+ if (act_len)
+ *act_len = ucr->current_sg.bytes;
+
+ return ucr->current_sg.status;
+}
+
+int rtsx_usb_transfer_data(struct rtsx_ucr *ucr, unsigned int pipe,
+ void *buf, unsigned int len, int num_sg,
+ unsigned int *act_len, int timeout)
+{
+ if (timeout < 600)
+ timeout = 600;
+
+ if (num_sg)
+ return rtsx_usb_bulk_transfer_sglist(ucr, pipe,
+ (struct scatterlist *)buf, num_sg, len, act_len,
+ timeout);
+ else
+ return usb_bulk_msg(ucr->pusb_dev, pipe, buf, len, act_len,
+ timeout);
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_transfer_data);
+
+static inline void rtsx_usb_seq_cmd_hdr(struct rtsx_ucr *ucr,
+ u16 addr, u16 len, u8 seq_type)
+{
+ rtsx_usb_cmd_hdr_tag(ucr);
+
+ ucr->cmd_buf[PACKET_TYPE] = seq_type;
+ ucr->cmd_buf[5] = (u8)(len >> 8);
+ ucr->cmd_buf[6] = (u8)len;
+ ucr->cmd_buf[8] = (u8)(addr >> 8);
+ ucr->cmd_buf[9] = (u8)addr;
+
+ if (seq_type == SEQ_WRITE)
+ ucr->cmd_buf[STAGE_FLAG] = 0;
+ else
+ ucr->cmd_buf[STAGE_FLAG] = STAGE_R;
+}
+
+static int rtsx_usb_seq_write_register(struct rtsx_ucr *ucr,
+ u16 addr, u16 len, u8 *data)
+{
+ u16 cmd_len = ALIGN(SEQ_WRITE_DATA_OFFSET + len, 4);
+
+ if (!data)
+ return -EINVAL;
+
+ if (cmd_len > IOBUF_SIZE)
+ return -EINVAL;
+
+ rtsx_usb_seq_cmd_hdr(ucr, addr, len, SEQ_WRITE);
+ memcpy(ucr->cmd_buf + SEQ_WRITE_DATA_OFFSET, data, len);
+
+ return rtsx_usb_transfer_data(ucr,
+ usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT),
+ ucr->cmd_buf, cmd_len, 0, NULL, 100);
+}
+
+static int rtsx_usb_seq_read_register(struct rtsx_ucr *ucr,
+ u16 addr, u16 len, u8 *data)
+{
+ int i, ret;
+ u16 rsp_len = round_down(len, 4);
+ u16 res_len = len - rsp_len;
+
+ if (!data)
+ return -EINVAL;
+
+ /* 4-byte aligned part */
+ if (rsp_len) {
+ rtsx_usb_seq_cmd_hdr(ucr, addr, len, SEQ_READ);
+ ret = rtsx_usb_transfer_data(ucr,
+ usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT),
+ ucr->cmd_buf, 12, 0, NULL, 100);
+ if (ret)
+ return ret;
+
+ ret = rtsx_usb_transfer_data(ucr,
+ usb_rcvbulkpipe(ucr->pusb_dev, EP_BULK_IN),
+ data, rsp_len, 0, NULL, 100);
+ if (ret)
+ return ret;
+ }
+
+ /* unaligned part */
+ for (i = 0; i < res_len; i++) {
+ ret = rtsx_usb_read_register(ucr, addr + rsp_len + i,
+ data + rsp_len + i);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+int rtsx_usb_read_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len)
+{
+ return rtsx_usb_seq_read_register(ucr, PPBUF_BASE2, (u16)buf_len, buf);
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_read_ppbuf);
+
+int rtsx_usb_write_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len)
+{
+ return rtsx_usb_seq_write_register(ucr, PPBUF_BASE2, (u16)buf_len, buf);
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_write_ppbuf);
+
+int rtsx_usb_ep0_write_register(struct rtsx_ucr *ucr, u16 addr,
+ u8 mask, u8 data)
+{
+ u16 value, index;
+
+ addr |= EP0_WRITE_REG_CMD << EP0_OP_SHIFT;
+ value = swab16(addr);
+ index = mask | data << 8;
+
+ return usb_control_msg(ucr->pusb_dev,
+ usb_sndctrlpipe(ucr->pusb_dev, 0), RTSX_USB_REQ_REG_OP,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value, index, NULL, 0, 100);
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_ep0_write_register);
+
+int rtsx_usb_ep0_read_register(struct rtsx_ucr *ucr, u16 addr, u8 *data)
+{
+ u16 value;
+
+ if (!data)
+ return -EINVAL;
+ *data = 0;
+
+ addr |= EP0_READ_REG_CMD << EP0_OP_SHIFT;
+ value = swab16(addr);
+
+ return usb_control_msg(ucr->pusb_dev,
+ usb_rcvctrlpipe(ucr->pusb_dev, 0), RTSX_USB_REQ_REG_OP,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value, 0, data, 1, 100);
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_ep0_read_register);
+
+void rtsx_usb_add_cmd(struct rtsx_ucr *ucr, u8 cmd_type, u16 reg_addr,
+ u8 mask, u8 data)
+{
+ int i;
+
+ if (ucr->cmd_idx < (IOBUF_SIZE - CMD_OFFSET) / 4) {
+ i = CMD_OFFSET + ucr->cmd_idx * 4;
+
+ ucr->cmd_buf[i++] = ((cmd_type & 0x03) << 6) |
+ (u8)((reg_addr >> 8) & 0x3F);
+ ucr->cmd_buf[i++] = (u8)reg_addr;
+ ucr->cmd_buf[i++] = mask;
+ ucr->cmd_buf[i++] = data;
+
+ ucr->cmd_idx++;
+ }
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_add_cmd);
+
+int rtsx_usb_send_cmd(struct rtsx_ucr *ucr, u8 flag, int timeout)
+{
+ int ret;
+
+ ucr->cmd_buf[CNT_H] = (u8)(ucr->cmd_idx >> 8);
+ ucr->cmd_buf[CNT_L] = (u8)(ucr->cmd_idx);
+ ucr->cmd_buf[STAGE_FLAG] = flag;
+
+ ret = rtsx_usb_transfer_data(ucr,
+ usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT),
+ ucr->cmd_buf, ucr->cmd_idx * 4 + CMD_OFFSET,
+ 0, NULL, timeout);
+ if (ret) {
+ rtsx_usb_clear_fsm_err(ucr);
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_send_cmd);
+
+int rtsx_usb_get_rsp(struct rtsx_ucr *ucr, int rsp_len, int timeout)
+{
+ if (rsp_len <= 0)
+ return -EINVAL;
+
+ rsp_len = ALIGN(rsp_len, 4);
+
+ return rtsx_usb_transfer_data(ucr,
+ usb_rcvbulkpipe(ucr->pusb_dev, EP_BULK_IN),
+ ucr->rsp_buf, rsp_len, 0, NULL, timeout);
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_get_rsp);
+
+static int rtsx_usb_get_status_with_bulk(struct rtsx_ucr *ucr, u16 *status)
+{
+ int ret;
+
+ rtsx_usb_init_cmd(ucr);
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_EXIST, 0x00, 0x00);
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, OCPSTAT, 0x00, 0x00);
+ ret = rtsx_usb_send_cmd(ucr, MODE_CR, 100);
+ if (ret)
+ return ret;
+
+ ret = rtsx_usb_get_rsp(ucr, 2, 100);
+ if (ret)
+ return ret;
+
+ *status = ((ucr->rsp_buf[0] >> 2) & 0x0f) |
+ ((ucr->rsp_buf[1] & 0x03) << 4);
+
+ return 0;
+}
+
+int rtsx_usb_get_card_status(struct rtsx_ucr *ucr, u16 *status)
+{
+ int ret;
+
+ if (!status)
+ return -EINVAL;
+
+ if (polling_pipe == 0)
+ ret = usb_control_msg(ucr->pusb_dev,
+ usb_rcvctrlpipe(ucr->pusb_dev, 0),
+ RTSX_USB_REQ_POLL,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, status, 2, 100);
+ else
+ ret = rtsx_usb_get_status_with_bulk(ucr, status);
+
+ /* usb_control_msg may return positive when success */
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_get_card_status);
+
+static int rtsx_usb_write_phy_register(struct rtsx_ucr *ucr, u8 addr, u8 val)
+{
+ dev_dbg(&ucr->pusb_intf->dev, "Write 0x%x to phy register 0x%x\n",
+ val, addr);
+
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VSTAIN, 0xFF, val);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VCONTROL, 0xFF, addr & 0x0F);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x01);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VCONTROL,
+ 0xFF, (addr >> 4) & 0x0F);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x01);
+
+ return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+int rtsx_usb_write_register(struct rtsx_ucr *ucr, u16 addr, u8 mask, u8 data)
+{
+ rtsx_usb_init_cmd(ucr);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, addr, mask, data);
+ return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_write_register);
+
+int rtsx_usb_read_register(struct rtsx_ucr *ucr, u16 addr, u8 *data)
+{
+ int ret;
+
+ if (data != NULL)
+ *data = 0;
+
+ rtsx_usb_init_cmd(ucr);
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, addr, 0, 0);
+ ret = rtsx_usb_send_cmd(ucr, MODE_CR, 100);
+ if (ret)
+ return ret;
+
+ ret = rtsx_usb_get_rsp(ucr, 1, 100);
+ if (ret)
+ return ret;
+
+ if (data != NULL)
+ *data = ucr->rsp_buf[0];
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_read_register);
+
+static inline u8 double_ssc_depth(u8 depth)
+{
+ return (depth > 1) ? (depth - 1) : depth;
+}
+
+static u8 revise_ssc_depth(u8 ssc_depth, u8 div)
+{
+ if (div > CLK_DIV_1) {
+ if (ssc_depth > div - 1)
+ ssc_depth -= (div - 1);
+ else
+ ssc_depth = SSC_DEPTH_2M;
+ }
+
+ return ssc_depth;
+}
+
+int rtsx_usb_switch_clock(struct rtsx_ucr *ucr, unsigned int card_clock,
+ u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk)
+{
+ int ret;
+ u8 n, clk_divider, mcu_cnt, div;
+
+ if (!card_clock) {
+ ucr->cur_clk = 0;
+ return 0;
+ }
+
+ if (initial_mode) {
+ /* We use 250k(around) here, in initial stage */
+ clk_divider = SD_CLK_DIVIDE_128;
+ card_clock = 30000000;
+ } else {
+ clk_divider = SD_CLK_DIVIDE_0;
+ }
+
+ ret = rtsx_usb_write_register(ucr, SD_CFG1,
+ SD_CLK_DIVIDE_MASK, clk_divider);
+ if (ret < 0)
+ return ret;
+
+ card_clock /= 1000000;
+ dev_dbg(&ucr->pusb_intf->dev,
+ "Switch card clock to %dMHz\n", card_clock);
+
+ if (!initial_mode && double_clk)
+ card_clock *= 2;
+ dev_dbg(&ucr->pusb_intf->dev,
+ "Internal SSC clock: %dMHz (cur_clk = %d)\n",
+ card_clock, ucr->cur_clk);
+
+ if (card_clock == ucr->cur_clk)
+ return 0;
+
+ /* Converting clock value into internal settings: n and div */
+ n = card_clock - 2;
+ if ((card_clock <= 2) || (n > MAX_DIV_N))
+ return -EINVAL;
+
+ mcu_cnt = 60/card_clock + 3;
+ if (mcu_cnt > 15)
+ mcu_cnt = 15;
+
+ /* Make sure that the SSC clock div_n is not less than MIN_DIV_N */
+
+ div = CLK_DIV_1;
+ while (n < MIN_DIV_N && div < CLK_DIV_4) {
+ n = (n + 2) * 2 - 2;
+ div++;
+ }
+ dev_dbg(&ucr->pusb_intf->dev, "n = %d, div = %d\n", n, div);
+
+ if (double_clk)
+ ssc_depth = double_ssc_depth(ssc_depth);
+
+ ssc_depth = revise_ssc_depth(ssc_depth, div);
+ dev_dbg(&ucr->pusb_intf->dev, "ssc_depth = %d\n", ssc_depth);
+
+ rtsx_usb_init_cmd(ucr);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV, CLK_CHANGE, CLK_CHANGE);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV,
+ 0x3F, (div << 4) | mcu_cnt);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_CTL2,
+ SSC_DEPTH_MASK, ssc_depth);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, n);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, SSC_RSTB);
+ if (vpclk) {
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+ PHASE_NOT_RESET, 0);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+ PHASE_NOT_RESET, PHASE_NOT_RESET);
+ }
+
+ ret = rtsx_usb_send_cmd(ucr, MODE_C, 2000);
+ if (ret < 0)
+ return ret;
+
+ ret = rtsx_usb_write_register(ucr, SSC_CTL1, 0xff,
+ SSC_RSTB | SSC_8X_EN | SSC_SEL_4M);
+ if (ret < 0)
+ return ret;
+
+ /* Wait SSC clock stable */
+ usleep_range(100, 1000);
+
+ ret = rtsx_usb_write_register(ucr, CLK_DIV, CLK_CHANGE, 0);
+ if (ret < 0)
+ return ret;
+
+ ucr->cur_clk = card_clock;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_switch_clock);
+
+int rtsx_usb_card_exclusive_check(struct rtsx_ucr *ucr, int card)
+{
+ int ret;
+ u16 val;
+ u16 cd_mask[] = {
+ [RTSX_USB_SD_CARD] = (CD_MASK & ~SD_CD),
+ [RTSX_USB_MS_CARD] = (CD_MASK & ~MS_CD)
+ };
+
+ ret = rtsx_usb_get_card_status(ucr, &val);
+ /*
+ * If get status fails, return 0 (ok) for the exclusive check
+ * and let the flow fail at somewhere else.
+ */
+ if (ret)
+ return 0;
+
+ if (val & cd_mask[card])
+ return -EIO;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_card_exclusive_check);
+
+static int rtsx_usb_reset_chip(struct rtsx_ucr *ucr)
+{
+ int ret;
+ u8 val;
+
+ rtsx_usb_init_cmd(ucr);
+
+ if (CHECK_PKG(ucr, LQFP48)) {
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL,
+ LDO3318_PWR_MASK, LDO_SUSPEND);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL,
+ FORCE_LDO_POWERB, FORCE_LDO_POWERB);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1,
+ 0x30, 0x10);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5,
+ 0x03, 0x01);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6,
+ 0x0C, 0x04);
+ }
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SYS_DUMMY0, NYET_MSAK, NYET_EN);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CD_DEGLITCH_WIDTH, 0xFF, 0x08);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ CD_DEGLITCH_EN, XD_CD_DEGLITCH_EN, 0x0);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD30_DRIVE_SEL,
+ SD30_DRIVE_MASK, DRIVER_TYPE_D);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ CARD_DRIVE_SEL, SD20_DRIVE_MASK, 0x0);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, LDO_POWER_CFG, 0xE0, 0x0);
+
+ if (ucr->is_rts5179)
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ CARD_PULL_CTL5, 0x03, 0x01);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DMA1_CTL,
+ EXTEND_DMA1_ASYNC_SIGNAL, EXTEND_DMA1_ASYNC_SIGNAL);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_INT_PEND,
+ XD_INT | MS_INT | SD_INT,
+ XD_INT | MS_INT | SD_INT);
+
+ ret = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+ if (ret)
+ return ret;
+
+ /* config non-crystal mode */
+ rtsx_usb_read_register(ucr, CFG_MODE, &val);
+ if ((val & XTAL_FREE) || ((val & CLK_MODE_MASK) == CLK_MODE_NON_XTAL)) {
+ ret = rtsx_usb_write_phy_register(ucr, 0xC2, 0x7C);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rtsx_usb_init_chip(struct rtsx_ucr *ucr)
+{
+ int ret;
+ u8 val;
+
+ rtsx_usb_clear_fsm_err(ucr);
+
+ /* power on SSC */
+ ret = rtsx_usb_write_register(ucr,
+ FPDCTL, SSC_POWER_MASK, SSC_POWER_ON);
+ if (ret)
+ return ret;
+
+ usleep_range(100, 1000);
+ ret = rtsx_usb_write_register(ucr, CLK_DIV, CLK_CHANGE, 0x00);
+ if (ret)
+ return ret;
+
+ /* determine IC version */
+ ret = rtsx_usb_read_register(ucr, HW_VERSION, &val);
+ if (ret)
+ return ret;
+
+ ucr->ic_version = val & HW_VER_MASK;
+
+ /* determine package */
+ ret = rtsx_usb_read_register(ucr, CARD_SHARE_MODE, &val);
+ if (ret)
+ return ret;
+
+ if (val & CARD_SHARE_LQFP_SEL) {
+ ucr->package = LQFP48;
+ dev_dbg(&ucr->pusb_intf->dev, "Package: LQFP48\n");
+ } else {
+ ucr->package = QFN24;
+ dev_dbg(&ucr->pusb_intf->dev, "Package: QFN24\n");
+ }
+
+ /* determine IC variations */
+ rtsx_usb_read_register(ucr, CFG_MODE_1, &val);
+ if (val & RTS5179) {
+ ucr->is_rts5179 = true;
+ dev_dbg(&ucr->pusb_intf->dev, "Device is rts5179\n");
+ } else {
+ ucr->is_rts5179 = false;
+ }
+
+ return rtsx_usb_reset_chip(ucr);
+}
+
+static int rtsx_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usb_dev = interface_to_usbdev(intf);
+ struct rtsx_ucr *ucr;
+ int ret;
+
+ dev_dbg(&intf->dev,
+ ": Realtek USB Card Reader found at bus %03d address %03d\n",
+ usb_dev->bus->busnum, usb_dev->devnum);
+
+ ucr = devm_kzalloc(&intf->dev, sizeof(*ucr), GFP_KERNEL);
+ if (!ucr)
+ return -ENOMEM;
+
+ ucr->pusb_dev = usb_dev;
+
+ ucr->iobuf = usb_alloc_coherent(ucr->pusb_dev, IOBUF_SIZE,
+ GFP_KERNEL, &ucr->iobuf_dma);
+ if (!ucr->iobuf)
+ return -ENOMEM;
+
+ usb_set_intfdata(intf, ucr);
+
+ ucr->vendor_id = id->idVendor;
+ ucr->product_id = id->idProduct;
+ ucr->cmd_buf = ucr->rsp_buf = ucr->iobuf;
+
+ mutex_init(&ucr->dev_mutex);
+
+ ucr->pusb_intf = intf;
+
+ /* initialize */
+ ret = rtsx_usb_init_chip(ucr);
+ if (ret)
+ goto out_init_fail;
+
+ ret = mfd_add_devices(&intf->dev, usb_dev->devnum, rtsx_usb_cells,
+ ARRAY_SIZE(rtsx_usb_cells), NULL, 0, NULL);
+ if (ret)
+ goto out_init_fail;
+
+ /* initialize USB SG transfer timer */
+ init_timer(&ucr->sg_timer);
+ setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr);
+#ifdef CONFIG_PM
+ intf->needs_remote_wakeup = 1;
+ usb_enable_autosuspend(usb_dev);
+#endif
+
+ return 0;
+
+out_init_fail:
+ usb_free_coherent(ucr->pusb_dev, IOBUF_SIZE, ucr->iobuf,
+ ucr->iobuf_dma);
+ return ret;
+}
+
+static void rtsx_usb_disconnect(struct usb_interface *intf)
+{
+ struct rtsx_ucr *ucr = (struct rtsx_ucr *)usb_get_intfdata(intf);
+
+ dev_dbg(&intf->dev, "%s called\n", __func__);
+
+ mfd_remove_devices(&intf->dev);
+
+ usb_set_intfdata(ucr->pusb_intf, NULL);
+ usb_free_coherent(ucr->pusb_dev, IOBUF_SIZE, ucr->iobuf,
+ ucr->iobuf_dma);
+}
+
+#ifdef CONFIG_PM
+static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct rtsx_ucr *ucr =
+ (struct rtsx_ucr *)usb_get_intfdata(intf);
+
+ dev_dbg(&intf->dev, "%s called with pm message 0x%04u\n",
+ __func__, message.event);
+
+ mutex_lock(&ucr->dev_mutex);
+ rtsx_usb_turn_off_led(ucr);
+ mutex_unlock(&ucr->dev_mutex);
+ return 0;
+}
+
+static int rtsx_usb_resume(struct usb_interface *intf)
+{
+ return 0;
+}
+
+static int rtsx_usb_reset_resume(struct usb_interface *intf)
+{
+ struct rtsx_ucr *ucr =
+ (struct rtsx_ucr *)usb_get_intfdata(intf);
+
+ rtsx_usb_reset_chip(ucr);
+ return 0;
+}
+
+#else /* CONFIG_PM */
+
+#define rtsx_usb_suspend NULL
+#define rtsx_usb_resume NULL
+#define rtsx_usb_reset_resume NULL
+
+#endif /* CONFIG_PM */
+
+
+static int rtsx_usb_pre_reset(struct usb_interface *intf)
+{
+ struct rtsx_ucr *ucr = (struct rtsx_ucr *)usb_get_intfdata(intf);
+
+ mutex_lock(&ucr->dev_mutex);
+ return 0;
+}
+
+static int rtsx_usb_post_reset(struct usb_interface *intf)
+{
+ struct rtsx_ucr *ucr = (struct rtsx_ucr *)usb_get_intfdata(intf);
+
+ mutex_unlock(&ucr->dev_mutex);
+ return 0;
+}
+
+static struct usb_device_id rtsx_usb_usb_ids[] = {
+ { USB_DEVICE(0x0BDA, 0x0129) },
+ { USB_DEVICE(0x0BDA, 0x0139) },
+ { USB_DEVICE(0x0BDA, 0x0140) },
+ { }
+};
+
+static struct usb_driver rtsx_usb_driver = {
+ .name = "rtsx_usb",
+ .probe = rtsx_usb_probe,
+ .disconnect = rtsx_usb_disconnect,
+ .suspend = rtsx_usb_suspend,
+ .resume = rtsx_usb_resume,
+ .reset_resume = rtsx_usb_reset_resume,
+ .pre_reset = rtsx_usb_pre_reset,
+ .post_reset = rtsx_usb_post_reset,
+ .id_table = rtsx_usb_usb_ids,
+ .supports_autosuspend = 1,
+ .soft_unbind = 1,
+};
+
+module_usb_driver(rtsx_usb_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Roger Tseng <rogerable@realtek.com>");
+MODULE_DESCRIPTION("Realtek USB Card Reader Driver");
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 281a82747275..1cf27521fff4 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -60,6 +60,7 @@ static const struct mfd_cell s5m8767_devs[] = {
.name = "s5m-rtc",
}, {
.name = "s5m8767-clk",
+ .of_compatible = "samsung,s5m8767-clk",
}
};
@@ -68,6 +69,7 @@ static const struct mfd_cell s2mps11_devs[] = {
.name = "s2mps11-pmic",
}, {
.name = "s2mps11-clk",
+ .of_compatible = "samsung,s2mps11-clk",
}
};
@@ -78,6 +80,7 @@ static const struct mfd_cell s2mps14_devs[] = {
.name = "s2mps14-rtc",
}, {
.name = "s2mps14-clk",
+ .of_compatible = "samsung,s2mps14-clk",
}
};
@@ -295,6 +298,13 @@ static int sec_pmic_probe(struct i2c_client *i2c,
switch (sec_pmic->device_type) {
case S2MPA01:
regmap = &s2mpa01_regmap_config;
+ /*
+ * The rtc-s5m driver does not support S2MPA01 and there
+ * is no mfd_cell for S2MPA01 RTC device.
+ * However we must pass something to devm_regmap_init_i2c()
+ * so use S5M-like regmap config even though it wouldn't work.
+ */
+ regmap_rtc = &s5m_rtc_regmap_config;
break;
case S2MPS11X:
regmap = &s2mps11_regmap_config;
@@ -344,7 +354,7 @@ static int sec_pmic_probe(struct i2c_client *i2c,
ret = PTR_ERR(sec_pmic->regmap_rtc);
dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n",
ret);
- return ret;
+ goto err_regmap_rtc;
}
if (pdata && pdata->cfg_pmic_irq)
@@ -385,14 +395,15 @@ static int sec_pmic_probe(struct i2c_client *i2c,
}
if (ret)
- goto err;
+ goto err_mfd;
device_init_wakeup(sec_pmic->dev, sec_pmic->wakeup);
return ret;
-err:
+err_mfd:
sec_irq_exit(sec_pmic);
+err_regmap_rtc:
i2c_unregister_device(sec_pmic->rtc);
return ret;
}
diff --git a/drivers/mfd/smsc-ece1099.c b/drivers/mfd/smsc-ece1099.c
index 24ae3d8421c5..90112d4cc905 100644
--- a/drivers/mfd/smsc-ece1099.c
+++ b/drivers/mfd/smsc-ece1099.c
@@ -13,7 +13,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 42ccd0544513..4a91f6771fb8 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -706,7 +706,7 @@ static int stmpe1801_reset(struct stmpe *stmpe)
if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET))
return 0;
usleep_range(100, 200);
- };
+ }
return -EIO;
}
diff --git a/drivers/mfd/stw481x.c b/drivers/mfd/stw481x.c
index 1243d5c6a448..7ceb3df09e25 100644
--- a/drivers/mfd/stw481x.c
+++ b/drivers/mfd/stw481x.c
@@ -167,7 +167,7 @@ static struct mfd_cell stw481x_cells[] = {
},
};
-const struct regmap_config stw481x_regmap_config = {
+static const struct regmap_config stw481x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
@@ -186,6 +186,12 @@ static int stw481x_probe(struct i2c_client *client,
i2c_set_clientdata(client, stw481x);
stw481x->client = client;
stw481x->map = devm_regmap_init_i2c(client, &stw481x_regmap_config);
+ if (IS_ERR(stw481x->map)) {
+ ret = PTR_ERR(stw481x->map);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
ret = stw481x_startup(stw481x);
if (ret) {
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index 71841f9181bd..dbea55de4397 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -69,13 +69,6 @@ EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_compatible);
static int syscon_match_pdevname(struct device *dev, void *data)
{
- struct platform_device *pdev = to_platform_device(dev);
- const struct platform_device_id *id = platform_get_device_id(pdev);
-
- if (id)
- if (!strcmp(id->name, (const char *)data))
- return 1;
-
return !strcmp(dev_name(dev), (const char *)data);
}
@@ -152,7 +145,7 @@ static int syscon_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, syscon);
- dev_info(dev, "regmap %pR registered\n", res);
+ dev_dbg(dev, "regmap %pR registered\n", res);
return 0;
}
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index 2cf636c267d9..bd83accc0f6d 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -13,8 +13,10 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tc3589x.h>
+#include <linux/err.h>
/**
* enum tc3589x_version - indicates the TC3589x version
@@ -160,7 +162,7 @@ static const struct mfd_cell tc3589x_dev_gpio[] = {
.name = "tc3589x-gpio",
.num_resources = ARRAY_SIZE(gpio_resources),
.resources = &gpio_resources[0],
- .of_compatible = "tc3589x-gpio",
+ .of_compatible = "toshiba,tc3589x-gpio",
},
};
@@ -169,7 +171,7 @@ static const struct mfd_cell tc3589x_dev_keypad[] = {
.name = "tc3589x-keypad",
.num_resources = ARRAY_SIZE(keypad_resources),
.resources = &keypad_resources[0],
- .of_compatible = "tc3589x-keypad",
+ .of_compatible = "toshiba,tc3589x-keypad",
},
};
@@ -318,45 +320,74 @@ static int tc3589x_device_init(struct tc3589x *tc3589x)
return ret;
}
-static int tc3589x_of_probe(struct device_node *np,
- struct tc3589x_platform_data *pdata)
+#ifdef CONFIG_OF
+static const struct of_device_id tc3589x_match[] = {
+ /* Legacy compatible string */
+ { .compatible = "tc3589x", .data = (void *) TC3589X_UNKNOWN },
+ { .compatible = "toshiba,tc35890", .data = (void *) TC3589X_TC35890 },
+ { .compatible = "toshiba,tc35892", .data = (void *) TC3589X_TC35892 },
+ { .compatible = "toshiba,tc35893", .data = (void *) TC3589X_TC35893 },
+ { .compatible = "toshiba,tc35894", .data = (void *) TC3589X_TC35894 },
+ { .compatible = "toshiba,tc35895", .data = (void *) TC3589X_TC35895 },
+ { .compatible = "toshiba,tc35896", .data = (void *) TC3589X_TC35896 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, tc3589x_match);
+
+static struct tc3589x_platform_data *
+tc3589x_of_probe(struct device *dev, enum tc3589x_version *version)
{
+ struct device_node *np = dev->of_node;
+ struct tc3589x_platform_data *pdata;
struct device_node *child;
+ const struct of_device_id *of_id;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+
+ of_id = of_match_device(tc3589x_match, dev);
+ if (!of_id)
+ return ERR_PTR(-ENODEV);
+ *version = (enum tc3589x_version) of_id->data;
for_each_child_of_node(np, child) {
- if (!strcmp(child->name, "tc3589x_gpio")) {
+ if (of_device_is_compatible(child, "toshiba,tc3589x-gpio"))
pdata->block |= TC3589x_BLOCK_GPIO;
- }
- if (!strcmp(child->name, "tc3589x_keypad")) {
+ if (of_device_is_compatible(child, "toshiba,tc3589x-keypad"))
pdata->block |= TC3589x_BLOCK_KEYPAD;
- }
}
- return 0;
+ return pdata;
}
+#else
+static inline struct tc3589x_platform_data *
+tc3589x_of_probe(struct device *dev, enum tc3589x_version *version)
+{
+ dev_err(dev, "no device tree support\n");
+ return ERR_PTR(-ENODEV);
+}
+#endif
static int tc3589x_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
- struct tc3589x_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct device_node *np = i2c->dev.of_node;
+ struct tc3589x_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct tc3589x *tc3589x;
+ enum tc3589x_version version;
int ret;
if (!pdata) {
- if (np) {
- pdata = devm_kzalloc(&i2c->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
-
- ret = tc3589x_of_probe(np, pdata);
- if (ret)
- return ret;
- }
- else {
+ pdata = tc3589x_of_probe(&i2c->dev, &version);
+ if (IS_ERR(pdata)) {
dev_err(&i2c->dev, "No platform data or DT found\n");
- return -EINVAL;
+ return PTR_ERR(pdata);
}
+ } else {
+ /* When not probing from device tree we have this ID */
+ version = id->driver_data;
}
if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA
@@ -375,7 +406,7 @@ static int tc3589x_probe(struct i2c_client *i2c,
tc3589x->pdata = pdata;
tc3589x->irq_base = pdata->irq_base;
- switch (id->driver_data) {
+ switch (version) {
case TC3589X_TC35893:
case TC3589X_TC35895:
case TC3589X_TC35896:
@@ -471,9 +502,12 @@ static const struct i2c_device_id tc3589x_id[] = {
MODULE_DEVICE_TABLE(i2c, tc3589x_id);
static struct i2c_driver tc3589x_driver = {
- .driver.name = "tc3589x",
- .driver.owner = THIS_MODULE,
- .driver.pm = &tc3589x_dev_pm_ops,
+ .driver = {
+ .name = "tc3589x",
+ .owner = THIS_MODULE,
+ .pm = &tc3589x_dev_pm_ops,
+ .of_match_table = of_match_ptr(tc3589x_match),
+ },
.probe = tc3589x_probe,
.remove = tc3589x_remove,
.id_table = tc3589x_id,
diff --git a/drivers/mfd/ti-ssp.c b/drivers/mfd/ti-ssp.c
deleted file mode 100644
index a5424579679c..000000000000
--- a/drivers/mfd/ti-ssp.c
+++ /dev/null
@@ -1,465 +0,0 @@
-/*
- * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs
- *
- * Copyright (C) 2010 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/sched.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/ti_ssp.h>
-
-/* Register Offsets */
-#define REG_REV 0x00
-#define REG_IOSEL_1 0x04
-#define REG_IOSEL_2 0x08
-#define REG_PREDIV 0x0c
-#define REG_INTR_ST 0x10
-#define REG_INTR_EN 0x14
-#define REG_TEST_CTRL 0x18
-
-/* Per port registers */
-#define PORT_CFG_2 0x00
-#define PORT_ADDR 0x04
-#define PORT_DATA 0x08
-#define PORT_CFG_1 0x0c
-#define PORT_STATE 0x10
-
-#define SSP_PORT_CONFIG_MASK (SSP_EARLY_DIN | SSP_DELAY_DOUT)
-#define SSP_PORT_CLKRATE_MASK 0x0f
-
-#define SSP_SEQRAM_WR_EN BIT(4)
-#define SSP_SEQRAM_RD_EN BIT(5)
-#define SSP_START BIT(15)
-#define SSP_BUSY BIT(10)
-#define SSP_PORT_ASL BIT(7)
-#define SSP_PORT_CFO1 BIT(6)
-
-#define SSP_PORT_SEQRAM_SIZE 32
-
-static const int ssp_port_base[] = {0x040, 0x080};
-static const int ssp_port_seqram[] = {0x100, 0x180};
-
-struct ti_ssp {
- struct resource *res;
- struct device *dev;
- void __iomem *regs;
- spinlock_t lock;
- struct clk *clk;
- int irq;
- wait_queue_head_t wqh;
-
- /*
- * Some of the iosel2 register bits always read-back as 0, we need to
- * remember these values so that we don't clobber previously set
- * values.
- */
- u32 iosel2;
-};
-
-static inline struct ti_ssp *dev_to_ssp(struct device *dev)
-{
- return dev_get_drvdata(dev->parent);
-}
-
-static inline int dev_to_port(struct device *dev)
-{
- return to_platform_device(dev)->id;
-}
-
-/* Register Access Helpers, rmw() functions need to run locked */
-static inline u32 ssp_read(struct ti_ssp *ssp, int reg)
-{
- return __raw_readl(ssp->regs + reg);
-}
-
-static inline void ssp_write(struct ti_ssp *ssp, int reg, u32 val)
-{
- __raw_writel(val, ssp->regs + reg);
-}
-
-static inline void ssp_rmw(struct ti_ssp *ssp, int reg, u32 mask, u32 bits)
-{
- ssp_write(ssp, reg, (ssp_read(ssp, reg) & ~mask) | bits);
-}
-
-static inline u32 ssp_port_read(struct ti_ssp *ssp, int port, int reg)
-{
- return ssp_read(ssp, ssp_port_base[port] + reg);
-}
-
-static inline void ssp_port_write(struct ti_ssp *ssp, int port, int reg,
- u32 val)
-{
- ssp_write(ssp, ssp_port_base[port] + reg, val);
-}
-
-static inline void ssp_port_rmw(struct ti_ssp *ssp, int port, int reg,
- u32 mask, u32 bits)
-{
- ssp_rmw(ssp, ssp_port_base[port] + reg, mask, bits);
-}
-
-static inline void ssp_port_clr_bits(struct ti_ssp *ssp, int port, int reg,
- u32 bits)
-{
- ssp_port_rmw(ssp, port, reg, bits, 0);
-}
-
-static inline void ssp_port_set_bits(struct ti_ssp *ssp, int port, int reg,
- u32 bits)
-{
- ssp_port_rmw(ssp, port, reg, 0, bits);
-}
-
-/* Called to setup port clock mode, caller must hold ssp->lock */
-static int __set_mode(struct ti_ssp *ssp, int port, int mode)
-{
- mode &= SSP_PORT_CONFIG_MASK;
- ssp_port_rmw(ssp, port, PORT_CFG_1, SSP_PORT_CONFIG_MASK, mode);
-
- return 0;
-}
-
-int ti_ssp_set_mode(struct device *dev, int mode)
-{
- struct ti_ssp *ssp = dev_to_ssp(dev);
- int port = dev_to_port(dev);
- int ret;
-
- spin_lock(&ssp->lock);
- ret = __set_mode(ssp, port, mode);
- spin_unlock(&ssp->lock);
-
- return ret;
-}
-EXPORT_SYMBOL(ti_ssp_set_mode);
-
-/* Called to setup iosel2, caller must hold ssp->lock */
-static void __set_iosel2(struct ti_ssp *ssp, u32 mask, u32 val)
-{
- ssp->iosel2 = (ssp->iosel2 & ~mask) | val;
- ssp_write(ssp, REG_IOSEL_2, ssp->iosel2);
-}
-
-/* Called to setup port iosel, caller must hold ssp->lock */
-static void __set_iosel(struct ti_ssp *ssp, int port, u32 iosel)
-{
- unsigned val, shift = port ? 16 : 0;
-
- /* IOSEL1 gets the least significant 16 bits */
- val = ssp_read(ssp, REG_IOSEL_1);
- val &= 0xffff << (port ? 0 : 16);
- val |= (iosel & 0xffff) << (port ? 16 : 0);
- ssp_write(ssp, REG_IOSEL_1, val);
-
- /* IOSEL2 gets the most significant 16 bits */
- val = (iosel >> 16) & 0x7;
- __set_iosel2(ssp, 0x7 << shift, val << shift);
-}
-
-int ti_ssp_set_iosel(struct device *dev, u32 iosel)
-{
- struct ti_ssp *ssp = dev_to_ssp(dev);
- int port = dev_to_port(dev);
-
- spin_lock(&ssp->lock);
- __set_iosel(ssp, port, iosel);
- spin_unlock(&ssp->lock);
-
- return 0;
-}
-EXPORT_SYMBOL(ti_ssp_set_iosel);
-
-int ti_ssp_load(struct device *dev, int offs, u32* prog, int len)
-{
- struct ti_ssp *ssp = dev_to_ssp(dev);
- int port = dev_to_port(dev);
- int i;
-
- if (len > SSP_PORT_SEQRAM_SIZE)
- return -ENOSPC;
-
- spin_lock(&ssp->lock);
-
- /* Enable SeqRAM access */
- ssp_port_set_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN);
-
- /* Copy code */
- for (i = 0; i < len; i++) {
- __raw_writel(prog[i], ssp->regs + offs + 4*i +
- ssp_port_seqram[port]);
- }
-
- /* Disable SeqRAM access */
- ssp_port_clr_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN);
-
- spin_unlock(&ssp->lock);
-
- return 0;
-}
-EXPORT_SYMBOL(ti_ssp_load);
-
-int ti_ssp_raw_read(struct device *dev)
-{
- struct ti_ssp *ssp = dev_to_ssp(dev);
- int port = dev_to_port(dev);
- int shift = port ? 27 : 11;
-
- return (ssp_read(ssp, REG_IOSEL_2) >> shift) & 0xf;
-}
-EXPORT_SYMBOL(ti_ssp_raw_read);
-
-int ti_ssp_raw_write(struct device *dev, u32 val)
-{
- struct ti_ssp *ssp = dev_to_ssp(dev);
- int port = dev_to_port(dev), shift;
-
- spin_lock(&ssp->lock);
-
- shift = port ? 22 : 6;
- val &= 0xf;
- __set_iosel2(ssp, 0xf << shift, val << shift);
-
- spin_unlock(&ssp->lock);
-
- return 0;
-}
-EXPORT_SYMBOL(ti_ssp_raw_write);
-
-static inline int __xfer_done(struct ti_ssp *ssp, int port)
-{
- return !(ssp_port_read(ssp, port, PORT_CFG_1) & SSP_BUSY);
-}
-
-int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output)
-{
- struct ti_ssp *ssp = dev_to_ssp(dev);
- int port = dev_to_port(dev);
- int ret;
-
- if (pc & ~(0x3f))
- return -EINVAL;
-
- /* Grab ssp->lock to serialize rmw on ssp registers */
- spin_lock(&ssp->lock);
-
- ssp_port_write(ssp, port, PORT_ADDR, input >> 16);
- ssp_port_write(ssp, port, PORT_DATA, input & 0xffff);
- ssp_port_rmw(ssp, port, PORT_CFG_1, 0x3f, pc);
-
- /* grab wait queue head lock to avoid race with the isr */
- spin_lock_irq(&ssp->wqh.lock);
-
- /* kick off sequence execution in hardware */
- ssp_port_set_bits(ssp, port, PORT_CFG_1, SSP_START);
-
- /* drop ssp lock; no register writes beyond this */
- spin_unlock(&ssp->lock);
-
- ret = wait_event_interruptible_locked_irq(ssp->wqh,
- __xfer_done(ssp, port));
- spin_unlock_irq(&ssp->wqh.lock);
-
- if (ret < 0)
- return ret;
-
- if (output) {
- *output = (ssp_port_read(ssp, port, PORT_ADDR) << 16) |
- (ssp_port_read(ssp, port, PORT_DATA) & 0xffff);
- }
-
- ret = ssp_port_read(ssp, port, PORT_STATE) & 0x3f; /* stop address */
-
- return ret;
-}
-EXPORT_SYMBOL(ti_ssp_run);
-
-static irqreturn_t ti_ssp_interrupt(int irq, void *dev_data)
-{
- struct ti_ssp *ssp = dev_data;
-
- spin_lock(&ssp->wqh.lock);
-
- ssp_write(ssp, REG_INTR_ST, 0x3);
- wake_up_locked(&ssp->wqh);
-
- spin_unlock(&ssp->wqh.lock);
-
- return IRQ_HANDLED;
-}
-
-static int ti_ssp_probe(struct platform_device *pdev)
-{
- static struct ti_ssp *ssp;
- const struct ti_ssp_data *pdata = dev_get_platdata(&pdev->dev);
- int error = 0, prediv = 0xff, id;
- unsigned long sysclk;
- struct device *dev = &pdev->dev;
- struct mfd_cell cells[2];
-
- ssp = kzalloc(sizeof(*ssp), GFP_KERNEL);
- if (!ssp) {
- dev_err(dev, "cannot allocate device info\n");
- return -ENOMEM;
- }
-
- ssp->dev = dev;
- dev_set_drvdata(dev, ssp);
-
- ssp->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!ssp->res) {
- error = -ENODEV;
- dev_err(dev, "cannot determine register area\n");
- goto error_res;
- }
-
- if (!request_mem_region(ssp->res->start, resource_size(ssp->res),
- pdev->name)) {
- error = -ENOMEM;
- dev_err(dev, "cannot claim register memory\n");
- goto error_res;
- }
-
- ssp->regs = ioremap(ssp->res->start, resource_size(ssp->res));
- if (!ssp->regs) {
- error = -ENOMEM;
- dev_err(dev, "cannot map register memory\n");
- goto error_map;
- }
-
- ssp->clk = clk_get(dev, NULL);
- if (IS_ERR(ssp->clk)) {
- error = PTR_ERR(ssp->clk);
- dev_err(dev, "cannot claim device clock\n");
- goto error_clk;
- }
-
- ssp->irq = platform_get_irq(pdev, 0);
- if (ssp->irq < 0) {
- error = -ENODEV;
- dev_err(dev, "unknown irq\n");
- goto error_irq;
- }
-
- error = request_threaded_irq(ssp->irq, NULL, ti_ssp_interrupt, 0,
- dev_name(dev), ssp);
- if (error < 0) {
- dev_err(dev, "cannot acquire irq\n");
- goto error_irq;
- }
-
- spin_lock_init(&ssp->lock);
- init_waitqueue_head(&ssp->wqh);
-
- /* Power on and initialize SSP */
- error = clk_enable(ssp->clk);
- if (error) {
- dev_err(dev, "cannot enable device clock\n");
- goto error_enable;
- }
-
- /* Reset registers to a sensible known state */
- ssp_write(ssp, REG_IOSEL_1, 0);
- ssp_write(ssp, REG_IOSEL_2, 0);
- ssp_write(ssp, REG_INTR_EN, 0x3);
- ssp_write(ssp, REG_INTR_ST, 0x3);
- ssp_write(ssp, REG_TEST_CTRL, 0);
- ssp_port_write(ssp, 0, PORT_CFG_1, SSP_PORT_ASL);
- ssp_port_write(ssp, 1, PORT_CFG_1, SSP_PORT_ASL);
- ssp_port_write(ssp, 0, PORT_CFG_2, SSP_PORT_CFO1);
- ssp_port_write(ssp, 1, PORT_CFG_2, SSP_PORT_CFO1);
-
- sysclk = clk_get_rate(ssp->clk);
- if (pdata && pdata->out_clock)
- prediv = (sysclk / pdata->out_clock) - 1;
- prediv = clamp(prediv, 0, 0xff);
- ssp_rmw(ssp, REG_PREDIV, 0xff, prediv);
-
- memset(cells, 0, sizeof(cells));
- for (id = 0; id < 2; id++) {
- const struct ti_ssp_dev_data *data = &pdata->dev_data[id];
-
- cells[id].id = id;
- cells[id].name = data->dev_name;
- cells[id].platform_data = data->pdata;
- }
-
- error = mfd_add_devices(dev, 0, cells, 2, NULL, 0, NULL);
- if (error < 0) {
- dev_err(dev, "cannot add mfd cells\n");
- goto error_enable;
- }
-
- return 0;
-
-error_enable:
- free_irq(ssp->irq, ssp);
-error_irq:
- clk_put(ssp->clk);
-error_clk:
- iounmap(ssp->regs);
-error_map:
- release_mem_region(ssp->res->start, resource_size(ssp->res));
-error_res:
- kfree(ssp);
- return error;
-}
-
-static int ti_ssp_remove(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct ti_ssp *ssp = dev_get_drvdata(dev);
-
- mfd_remove_devices(dev);
- clk_disable(ssp->clk);
- free_irq(ssp->irq, ssp);
- clk_put(ssp->clk);
- iounmap(ssp->regs);
- release_mem_region(ssp->res->start, resource_size(ssp->res));
- kfree(ssp);
- return 0;
-}
-
-static struct platform_driver ti_ssp_driver = {
- .probe = ti_ssp_probe,
- .remove = ti_ssp_remove,
- .driver = {
- .name = "ti-ssp",
- .owner = THIS_MODULE,
- }
-};
-
-module_platform_driver(ti_ssp_driver);
-
-MODULE_DESCRIPTION("Sequencer Serial Port (SSP) Driver");
-MODULE_AUTHOR("Cyril Chemparathy");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ti-ssp");
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index d4e860413bb5..dd4bf5816221 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -14,7 +14,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/io.h>
@@ -184,12 +183,6 @@ static int ti_tscadc_probe(struct platform_device *pdev)
return -EINVAL;
}
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "no memory resource defined.\n");
- return -EINVAL;
- }
-
/* Allocate memory for device */
tscadc = devm_kzalloc(&pdev->dev,
sizeof(struct ti_tscadc_dev), GFP_KERNEL);
@@ -206,19 +199,10 @@ static int ti_tscadc_probe(struct platform_device *pdev)
} else
tscadc->irq = err;
- res = devm_request_mem_region(&pdev->dev,
- res->start, resource_size(res), pdev->name);
- if (!res) {
- dev_err(&pdev->dev, "failed to reserve registers.\n");
- return -EBUSY;
- }
-
- tscadc->tscadc_base = devm_ioremap(&pdev->dev,
- res->start, resource_size(res));
- if (!tscadc->tscadc_base) {
- dev_err(&pdev->dev, "failed to map registers.\n");
- return -ENOMEM;
- }
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ tscadc->tscadc_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(tscadc->tscadc_base))
+ return PTR_ERR(tscadc->tscadc_base);
tscadc->regmap_tscadc = devm_regmap_init_mmio(&pdev->dev,
tscadc->tscadc_base, &tscadc_regmap_config);
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index 2bc5cfb85204..6ce36d6970a4 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -715,7 +715,7 @@ static int timb_probe(struct pci_dev *dev,
for (i = 0; i < TIMBERDALE_NR_IRQS; i++)
msix_entries[i].entry = i;
- err = pci_enable_msix(dev, msix_entries, TIMBERDALE_NR_IRQS);
+ err = pci_enable_msix_exact(dev, msix_entries, TIMBERDALE_NR_IRQS);
if (err) {
dev_err(&dev->dev,
"MSI-X init failed: %d, expected entries: %d\n",
diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c
new file mode 100644
index 000000000000..a74bfb59f18f
--- /dev/null
+++ b/drivers/mfd/tps65218.c
@@ -0,0 +1,282 @@
+/*
+ * Driver for TPS65218 Integrated power management chipsets
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps65218.h>
+
+#define TPS65218_PASSWORD_REGS_UNLOCK 0x7D
+
+/**
+ * tps65218_reg_read: Read a single tps65218 register.
+ *
+ * @tps: Device to read from.
+ * @reg: Register to read.
+ * @val: Contians the value
+ */
+int tps65218_reg_read(struct tps65218 *tps, unsigned int reg,
+ unsigned int *val)
+{
+ return regmap_read(tps->regmap, reg, val);
+}
+EXPORT_SYMBOL_GPL(tps65218_reg_read);
+
+/**
+ * tps65218_reg_write: Write a single tps65218 register.
+ *
+ * @tps65218: Device to write to.
+ * @reg: Register to write to.
+ * @val: Value to write.
+ * @level: Password protected level
+ */
+int tps65218_reg_write(struct tps65218 *tps, unsigned int reg,
+ unsigned int val, unsigned int level)
+{
+ int ret;
+ unsigned int xor_reg_val;
+
+ switch (level) {
+ case TPS65218_PROTECT_NONE:
+ return regmap_write(tps->regmap, reg, val);
+ case TPS65218_PROTECT_L1:
+ xor_reg_val = reg ^ TPS65218_PASSWORD_REGS_UNLOCK;
+ ret = regmap_write(tps->regmap, TPS65218_REG_PASSWORD,
+ xor_reg_val);
+ if (ret < 0)
+ return ret;
+
+ return regmap_write(tps->regmap, reg, val);
+ default:
+ return -EINVAL;
+ }
+}
+EXPORT_SYMBOL_GPL(tps65218_reg_write);
+
+/**
+ * tps65218_update_bits: Modify bits w.r.t mask, val and level.
+ *
+ * @tps65218: Device to write to.
+ * @reg: Register to read-write to.
+ * @mask: Mask.
+ * @val: Value to write.
+ * @level: Password protected level
+ */
+static int tps65218_update_bits(struct tps65218 *tps, unsigned int reg,
+ unsigned int mask, unsigned int val, unsigned int level)
+{
+ int ret;
+ unsigned int data;
+
+ ret = tps65218_reg_read(tps, reg, &data);
+ if (ret) {
+ dev_err(tps->dev, "Read from reg 0x%x failed\n", reg);
+ return ret;
+ }
+
+ data &= ~mask;
+ data |= val & mask;
+
+ mutex_lock(&tps->tps_lock);
+ ret = tps65218_reg_write(tps, reg, data, level);
+ if (ret)
+ dev_err(tps->dev, "Write for reg 0x%x failed\n", reg);
+ mutex_unlock(&tps->tps_lock);
+
+ return ret;
+}
+
+int tps65218_set_bits(struct tps65218 *tps, unsigned int reg,
+ unsigned int mask, unsigned int val, unsigned int level)
+{
+ return tps65218_update_bits(tps, reg, mask, val, level);
+}
+EXPORT_SYMBOL_GPL(tps65218_set_bits);
+
+int tps65218_clear_bits(struct tps65218 *tps, unsigned int reg,
+ unsigned int mask, unsigned int level)
+{
+ return tps65218_update_bits(tps, reg, mask, 0, level);
+}
+EXPORT_SYMBOL_GPL(tps65218_clear_bits);
+
+static struct regmap_config tps65218_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static const struct regmap_irq tps65218_irqs[] = {
+ /* INT1 IRQs */
+ [TPS65218_PRGC_IRQ] = {
+ .mask = TPS65218_INT1_PRGC,
+ },
+ [TPS65218_CC_AQC_IRQ] = {
+ .mask = TPS65218_INT1_CC_AQC,
+ },
+ [TPS65218_HOT_IRQ] = {
+ .mask = TPS65218_INT1_HOT,
+ },
+ [TPS65218_PB_IRQ] = {
+ .mask = TPS65218_INT1_PB,
+ },
+ [TPS65218_AC_IRQ] = {
+ .mask = TPS65218_INT1_AC,
+ },
+ [TPS65218_VPRG_IRQ] = {
+ .mask = TPS65218_INT1_VPRG,
+ },
+ [TPS65218_INVALID1_IRQ] = {
+ },
+ [TPS65218_INVALID2_IRQ] = {
+ },
+ /* INT2 IRQs*/
+ [TPS65218_LS1_I_IRQ] = {
+ .mask = TPS65218_INT2_LS1_I,
+ .reg_offset = 1,
+ },
+ [TPS65218_LS2_I_IRQ] = {
+ .mask = TPS65218_INT2_LS2_I,
+ .reg_offset = 1,
+ },
+ [TPS65218_LS3_I_IRQ] = {
+ .mask = TPS65218_INT2_LS3_I,
+ .reg_offset = 1,
+ },
+ [TPS65218_LS1_F_IRQ] = {
+ .mask = TPS65218_INT2_LS1_F,
+ .reg_offset = 1,
+ },
+ [TPS65218_LS2_F_IRQ] = {
+ .mask = TPS65218_INT2_LS2_F,
+ .reg_offset = 1,
+ },
+ [TPS65218_LS3_F_IRQ] = {
+ .mask = TPS65218_INT2_LS3_F,
+ .reg_offset = 1,
+ },
+ [TPS65218_INVALID3_IRQ] = {
+ },
+ [TPS65218_INVALID4_IRQ] = {
+ },
+};
+
+static struct regmap_irq_chip tps65218_irq_chip = {
+ .name = "tps65218",
+ .irqs = tps65218_irqs,
+ .num_irqs = ARRAY_SIZE(tps65218_irqs),
+
+ .num_regs = 2,
+ .mask_base = TPS65218_REG_INT_MASK1,
+};
+
+static const struct of_device_id of_tps65218_match_table[] = {
+ { .compatible = "ti,tps65218", },
+};
+
+static int tps65218_probe(struct i2c_client *client,
+ const struct i2c_device_id *ids)
+{
+ struct tps65218 *tps;
+ const struct of_device_id *match;
+ int ret;
+
+ match = of_match_device(of_tps65218_match_table, &client->dev);
+ if (!match) {
+ dev_err(&client->dev,
+ "Failed to find matching dt id\n");
+ return -EINVAL;
+ }
+
+ tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+ if (!tps)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, tps);
+ tps->dev = &client->dev;
+ tps->irq = client->irq;
+ tps->regmap = devm_regmap_init_i2c(client, &tps65218_regmap_config);
+ if (IS_ERR(tps->regmap)) {
+ ret = PTR_ERR(tps->regmap);
+ dev_err(tps->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ mutex_init(&tps->tps_lock);
+
+ ret = regmap_add_irq_chip(tps->regmap, tps->irq,
+ IRQF_ONESHOT, 0, &tps65218_irq_chip,
+ &tps->irq_data);
+ if (ret < 0)
+ return ret;
+
+ ret = of_platform_populate(client->dev.of_node, NULL, NULL,
+ &client->dev);
+ if (ret < 0)
+ goto err_irq;
+
+ return 0;
+
+err_irq:
+ regmap_del_irq_chip(tps->irq, tps->irq_data);
+
+ return ret;
+}
+
+static int tps65218_remove(struct i2c_client *client)
+{
+ struct tps65218 *tps = i2c_get_clientdata(client);
+
+ regmap_del_irq_chip(tps->irq, tps->irq_data);
+
+ return 0;
+}
+
+static const struct i2c_device_id tps65218_id_table[] = {
+ { "tps65218", TPS65218 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, tps65218_id_table);
+
+static struct i2c_driver tps65218_driver = {
+ .driver = {
+ .name = "tps65218",
+ .owner = THIS_MODULE,
+ .of_match_table = of_tps65218_match_table,
+ },
+ .probe = tps65218_probe,
+ .remove = tps65218_remove,
+ .id_table = tps65218_id_table,
+};
+
+module_i2c_driver(tps65218_driver);
+
+MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
+MODULE_DESCRIPTION("TPS65218 chip family multi-function driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 1f142d76cbbc..460a014ca629 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -255,8 +255,10 @@ static int tps65910_irq_init(struct tps65910 *tps65910, int irq,
ret = regmap_add_irq_chip(tps65910->regmap, tps65910->chip_irq,
IRQF_ONESHOT, pdata->irq_base,
tps6591x_irqs_chip, &tps65910->irq_data);
- if (ret < 0)
+ if (ret < 0) {
dev_warn(tps65910->dev, "Failed to add irq_chip %d\n", ret);
+ tps65910->chip_irq = 0;
+ }
return ret;
}
@@ -509,6 +511,7 @@ static int tps65910_i2c_probe(struct i2c_client *i2c,
regmap_irq_get_domain(tps65910->irq_data));
if (ret < 0) {
dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret);
+ tps65910_irq_exit(tps65910);
return ret;
}
diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c
index 27a518e0eec6..1f82d60b1d0f 100644
--- a/drivers/mfd/tps65912-core.c
+++ b/drivers/mfd/tps65912-core.c
@@ -15,7 +15,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/mfd/core.h>
diff --git a/drivers/mfd/tps65912-irq.c b/drivers/mfd/tps65912-irq.c
index d360a83a2738..fbecec7f1e3d 100644
--- a/drivers/mfd/tps65912-irq.c
+++ b/drivers/mfd/tps65912-irq.c
@@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/bug.h>
#include <linux/device.h>
#include <linux/interrupt.h>
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index ed718328eff1..e87140bef667 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -282,11 +282,11 @@ static struct reg_default twl4030_49_defaults[] = {
static bool twl4030_49_nop_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
- case 0:
- case 3:
- case 40:
- case 41:
- case 42:
+ case 0x00:
+ case 0x03:
+ case 0x40:
+ case 0x41:
+ case 0x42:
return false;
default:
return true;
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index 9aa6d1efa241..596b1f657e21 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -27,7 +27,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/init.h>
#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
deleted file mode 100644
index 4c583e471339..000000000000
--- a/drivers/mfd/twl4030-madc.c
+++ /dev/null
@@ -1,818 +0,0 @@
-/*
- *
- * TWL4030 MADC module driver-This driver monitors the real time
- * conversion of analog signals like battery temperature,
- * battery type, battery level etc.
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- * J Keerthy <j-keerthy@ti.com>
- *
- * Based on twl4030-madc.c
- * Copyright (C) 2008 Nokia Corporation
- * Mikko Ylinen <mikko.k.ylinen@nokia.com>
- *
- * Amit Kucheria <amit.kucheria@canonical.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/i2c/twl.h>
-#include <linux/i2c/twl4030-madc.h>
-#include <linux/module.h>
-#include <linux/stddef.h>
-#include <linux/mutex.h>
-#include <linux/bitops.h>
-#include <linux/jiffies.h>
-#include <linux/types.h>
-#include <linux/gfp.h>
-#include <linux/err.h>
-
-/*
- * struct twl4030_madc_data - a container for madc info
- * @dev - pointer to device structure for madc
- * @lock - mutex protecting this data structure
- * @requests - Array of request struct corresponding to SW1, SW2 and RT
- * @imr - Interrupt mask register of MADC
- * @isr - Interrupt status register of MADC
- */
-struct twl4030_madc_data {
- struct device *dev;
- struct mutex lock; /* mutex protecting this data structure */
- struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS];
- int imr;
- int isr;
-};
-
-static struct twl4030_madc_data *twl4030_madc;
-
-struct twl4030_prescale_divider_ratios {
- s16 numerator;
- s16 denominator;
-};
-
-static const struct twl4030_prescale_divider_ratios
-twl4030_divider_ratios[16] = {
- {1, 1}, /* CHANNEL 0 No Prescaler */
- {1, 1}, /* CHANNEL 1 No Prescaler */
- {6, 10}, /* CHANNEL 2 */
- {6, 10}, /* CHANNEL 3 */
- {6, 10}, /* CHANNEL 4 */
- {6, 10}, /* CHANNEL 5 */
- {6, 10}, /* CHANNEL 6 */
- {6, 10}, /* CHANNEL 7 */
- {3, 14}, /* CHANNEL 8 */
- {1, 3}, /* CHANNEL 9 */
- {1, 1}, /* CHANNEL 10 No Prescaler */
- {15, 100}, /* CHANNEL 11 */
- {1, 4}, /* CHANNEL 12 */
- {1, 1}, /* CHANNEL 13 Reserved channels */
- {1, 1}, /* CHANNEL 14 Reseved channels */
- {5, 11}, /* CHANNEL 15 */
-};
-
-
-/*
- * Conversion table from -3 to 55 degree Celcius
- */
-static int therm_tbl[] = {
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
-8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
-5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
-4040, 3910, 3790, 3670, 3550
-};
-
-/*
- * Structure containing the registers
- * of different conversion methods supported by MADC.
- * Hardware or RT real time conversion request initiated by external host
- * processor for RT Signal conversions.
- * External host processors can also request for non RT conversions
- * SW1 and SW2 software conversions also called asynchronous or GPC request.
- */
-static
-const struct twl4030_madc_conversion_method twl4030_conversion_methods[] = {
- [TWL4030_MADC_RT] = {
- .sel = TWL4030_MADC_RTSELECT_LSB,
- .avg = TWL4030_MADC_RTAVERAGE_LSB,
- .rbase = TWL4030_MADC_RTCH0_LSB,
- },
- [TWL4030_MADC_SW1] = {
- .sel = TWL4030_MADC_SW1SELECT_LSB,
- .avg = TWL4030_MADC_SW1AVERAGE_LSB,
- .rbase = TWL4030_MADC_GPCH0_LSB,
- .ctrl = TWL4030_MADC_CTRL_SW1,
- },
- [TWL4030_MADC_SW2] = {
- .sel = TWL4030_MADC_SW2SELECT_LSB,
- .avg = TWL4030_MADC_SW2AVERAGE_LSB,
- .rbase = TWL4030_MADC_GPCH0_LSB,
- .ctrl = TWL4030_MADC_CTRL_SW2,
- },
-};
-
-/*
- * Function to read a particular channel value.
- * @madc - pointer to struct twl4030_madc_data
- * @reg - lsb of ADC Channel
- * If the i2c read fails it returns an error else returns 0.
- */
-static int twl4030_madc_channel_raw_read(struct twl4030_madc_data *madc, u8 reg)
-{
- u8 msb, lsb;
- int ret;
- /*
- * For each ADC channel, we have MSB and LSB register pair. MSB address
- * is always LSB address+1. reg parameter is the address of LSB register
- */
- ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &msb, reg + 1);
- if (ret) {
- dev_err(madc->dev, "unable to read MSB register 0x%X\n",
- reg + 1);
- return ret;
- }
- ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &lsb, reg);
- if (ret) {
- dev_err(madc->dev, "unable to read LSB register 0x%X\n", reg);
- return ret;
- }
-
- return (int)(((msb << 8) | lsb) >> 6);
-}
-
-/*
- * Return battery temperature
- * Or < 0 on failure.
- */
-static int twl4030battery_temperature(int raw_volt)
-{
- u8 val;
- int temp, curr, volt, res, ret;
-
- volt = (raw_volt * TEMP_STEP_SIZE) / TEMP_PSR_R;
- /* Getting and calculating the supply current in micro ampers */
- ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, &val,
- REG_BCICTL2);
- if (ret < 0)
- return ret;
- curr = ((val & TWL4030_BCI_ITHEN) + 1) * 10;
- /* Getting and calculating the thermistor resistance in ohms */
- res = volt * 1000 / curr;
- /* calculating temperature */
- for (temp = 58; temp >= 0; temp--) {
- int actual = therm_tbl[temp];
-
- if ((actual - res) >= 0)
- break;
- }
-
- return temp + 1;
-}
-
-static int twl4030battery_current(int raw_volt)
-{
- int ret;
- u8 val;
-
- ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, &val,
- TWL4030_BCI_BCICTL1);
- if (ret)
- return ret;
- if (val & TWL4030_BCI_CGAIN) /* slope of 0.44 mV/mA */
- return (raw_volt * CURR_STEP_SIZE) / CURR_PSR_R1;
- else /* slope of 0.88 mV/mA */
- return (raw_volt * CURR_STEP_SIZE) / CURR_PSR_R2;
-}
-/*
- * Function to read channel values
- * @madc - pointer to twl4030_madc_data struct
- * @reg_base - Base address of the first channel
- * @Channels - 16 bit bitmap. If the bit is set, channel value is read
- * @buf - The channel values are stored here. if read fails error
- * @raw - Return raw values without conversion
- * value is stored
- * Returns the number of successfully read channels.
- */
-static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
- u8 reg_base, unsigned
- long channels, int *buf,
- bool raw)
-{
- int count = 0, count_req = 0, i;
- u8 reg;
-
- for_each_set_bit(i, &channels, TWL4030_MADC_MAX_CHANNELS) {
- reg = reg_base + 2 * i;
- buf[i] = twl4030_madc_channel_raw_read(madc, reg);
- if (buf[i] < 0) {
- dev_err(madc->dev,
- "Unable to read register 0x%X\n", reg);
- count_req++;
- continue;
- }
- if (raw) {
- count++;
- continue;
- }
- switch (i) {
- case 10:
- buf[i] = twl4030battery_current(buf[i]);
- if (buf[i] < 0) {
- dev_err(madc->dev, "err reading current\n");
- count_req++;
- } else {
- count++;
- buf[i] = buf[i] - 750;
- }
- break;
- case 1:
- buf[i] = twl4030battery_temperature(buf[i]);
- if (buf[i] < 0) {
- dev_err(madc->dev, "err reading temperature\n");
- count_req++;
- } else {
- buf[i] -= 3;
- count++;
- }
- break;
- default:
- count++;
- /* Analog Input (V) = conv_result * step_size / R
- * conv_result = decimal value of 10-bit conversion
- * result
- * step size = 1.5 / (2 ^ 10 -1)
- * R = Prescaler ratio for input channels.
- * Result given in mV hence multiplied by 1000.
- */
- buf[i] = (buf[i] * 3 * 1000 *
- twl4030_divider_ratios[i].denominator)
- / (2 * 1023 *
- twl4030_divider_ratios[i].numerator);
- }
- }
- if (count_req)
- dev_err(madc->dev, "%d channel conversion failed\n", count_req);
-
- return count;
-}
-
-/*
- * Enables irq.
- * @madc - pointer to twl4030_madc_data struct
- * @id - irq number to be enabled
- * can take one of TWL4030_MADC_RT, TWL4030_MADC_SW1, TWL4030_MADC_SW2
- * corresponding to RT, SW1, SW2 conversion requests.
- * If the i2c read fails it returns an error else returns 0.
- */
-static int twl4030_madc_enable_irq(struct twl4030_madc_data *madc, u8 id)
-{
- u8 val;
- int ret;
-
- ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &val, madc->imr);
- if (ret) {
- dev_err(madc->dev, "unable to read imr register 0x%X\n",
- madc->imr);
- return ret;
- }
- val &= ~(1 << id);
- ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, val, madc->imr);
- if (ret) {
- dev_err(madc->dev,
- "unable to write imr register 0x%X\n", madc->imr);
- return ret;
-
- }
-
- return 0;
-}
-
-/*
- * Disables irq.
- * @madc - pointer to twl4030_madc_data struct
- * @id - irq number to be disabled
- * can take one of TWL4030_MADC_RT, TWL4030_MADC_SW1, TWL4030_MADC_SW2
- * corresponding to RT, SW1, SW2 conversion requests.
- * Returns error if i2c read/write fails.
- */
-static int twl4030_madc_disable_irq(struct twl4030_madc_data *madc, u8 id)
-{
- u8 val;
- int ret;
-
- ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &val, madc->imr);
- if (ret) {
- dev_err(madc->dev, "unable to read imr register 0x%X\n",
- madc->imr);
- return ret;
- }
- val |= (1 << id);
- ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, val, madc->imr);
- if (ret) {
- dev_err(madc->dev,
- "unable to write imr register 0x%X\n", madc->imr);
- return ret;
- }
-
- return 0;
-}
-
-static irqreturn_t twl4030_madc_threaded_irq_handler(int irq, void *_madc)
-{
- struct twl4030_madc_data *madc = _madc;
- const struct twl4030_madc_conversion_method *method;
- u8 isr_val, imr_val;
- int i, len, ret;
- struct twl4030_madc_request *r;
-
- mutex_lock(&madc->lock);
- ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &isr_val, madc->isr);
- if (ret) {
- dev_err(madc->dev, "unable to read isr register 0x%X\n",
- madc->isr);
- goto err_i2c;
- }
- ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &imr_val, madc->imr);
- if (ret) {
- dev_err(madc->dev, "unable to read imr register 0x%X\n",
- madc->imr);
- goto err_i2c;
- }
- isr_val &= ~imr_val;
- for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
- if (!(isr_val & (1 << i)))
- continue;
- ret = twl4030_madc_disable_irq(madc, i);
- if (ret < 0)
- dev_dbg(madc->dev, "Disable interrupt failed%d\n", i);
- madc->requests[i].result_pending = 1;
- }
- for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
- r = &madc->requests[i];
- /* No pending results for this method, move to next one */
- if (!r->result_pending)
- continue;
- method = &twl4030_conversion_methods[r->method];
- /* Read results */
- len = twl4030_madc_read_channels(madc, method->rbase,
- r->channels, r->rbuf, r->raw);
- /* Return results to caller */
- if (r->func_cb != NULL) {
- r->func_cb(len, r->channels, r->rbuf);
- r->func_cb = NULL;
- }
- /* Free request */
- r->result_pending = 0;
- r->active = 0;
- }
- mutex_unlock(&madc->lock);
-
- return IRQ_HANDLED;
-
-err_i2c:
- /*
- * In case of error check whichever request is active
- * and service the same.
- */
- for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
- r = &madc->requests[i];
- if (r->active == 0)
- continue;
- method = &twl4030_conversion_methods[r->method];
- /* Read results */
- len = twl4030_madc_read_channels(madc, method->rbase,
- r->channels, r->rbuf, r->raw);
- /* Return results to caller */
- if (r->func_cb != NULL) {
- r->func_cb(len, r->channels, r->rbuf);
- r->func_cb = NULL;
- }
- /* Free request */
- r->result_pending = 0;
- r->active = 0;
- }
- mutex_unlock(&madc->lock);
-
- return IRQ_HANDLED;
-}
-
-static int twl4030_madc_set_irq(struct twl4030_madc_data *madc,
- struct twl4030_madc_request *req)
-{
- struct twl4030_madc_request *p;
- int ret;
-
- p = &madc->requests[req->method];
- memcpy(p, req, sizeof(*req));
- ret = twl4030_madc_enable_irq(madc, req->method);
- if (ret < 0) {
- dev_err(madc->dev, "enable irq failed!!\n");
- return ret;
- }
-
- return 0;
-}
-
-/*
- * Function which enables the madc conversion
- * by writing to the control register.
- * @madc - pointer to twl4030_madc_data struct
- * @conv_method - can be TWL4030_MADC_RT, TWL4030_MADC_SW2, TWL4030_MADC_SW1
- * corresponding to RT SW1 or SW2 conversion methods.
- * Returns 0 if succeeds else a negative error value
- */
-static int twl4030_madc_start_conversion(struct twl4030_madc_data *madc,
- int conv_method)
-{
- const struct twl4030_madc_conversion_method *method;
- int ret = 0;
- method = &twl4030_conversion_methods[conv_method];
- switch (conv_method) {
- case TWL4030_MADC_SW1:
- case TWL4030_MADC_SW2:
- ret = twl_i2c_write_u8(TWL4030_MODULE_MADC,
- TWL4030_MADC_SW_START, method->ctrl);
- if (ret) {
- dev_err(madc->dev,
- "unable to write ctrl register 0x%X\n",
- method->ctrl);
- return ret;
- }
- break;
- default:
- break;
- }
-
- return 0;
-}
-
-/*
- * Function that waits for conversion to be ready
- * @madc - pointer to twl4030_madc_data struct
- * @timeout_ms - timeout value in milliseconds
- * @status_reg - ctrl register
- * returns 0 if succeeds else a negative error value
- */
-static int twl4030_madc_wait_conversion_ready(struct twl4030_madc_data *madc,
- unsigned int timeout_ms,
- u8 status_reg)
-{
- unsigned long timeout;
- int ret;
-
- timeout = jiffies + msecs_to_jiffies(timeout_ms);
- do {
- u8 reg;
-
- ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &reg, status_reg);
- if (ret) {
- dev_err(madc->dev,
- "unable to read status register 0x%X\n",
- status_reg);
- return ret;
- }
- if (!(reg & TWL4030_MADC_BUSY) && (reg & TWL4030_MADC_EOC_SW))
- return 0;
- usleep_range(500, 2000);
- } while (!time_after(jiffies, timeout));
- dev_err(madc->dev, "conversion timeout!\n");
-
- return -EAGAIN;
-}
-
-/*
- * An exported function which can be called from other kernel drivers.
- * @req twl4030_madc_request structure
- * req->rbuf will be filled with read values of channels based on the
- * channel index. If a particular channel reading fails there will
- * be a negative error value in the corresponding array element.
- * returns 0 if succeeds else error value
- */
-int twl4030_madc_conversion(struct twl4030_madc_request *req)
-{
- const struct twl4030_madc_conversion_method *method;
- u8 ch_msb, ch_lsb;
- int ret;
-
- if (!req || !twl4030_madc)
- return -EINVAL;
-
- mutex_lock(&twl4030_madc->lock);
- if (req->method < TWL4030_MADC_RT || req->method > TWL4030_MADC_SW2) {
- ret = -EINVAL;
- goto out;
- }
- /* Do we have a conversion request ongoing */
- if (twl4030_madc->requests[req->method].active) {
- ret = -EBUSY;
- goto out;
- }
- ch_msb = (req->channels >> 8) & 0xff;
- ch_lsb = req->channels & 0xff;
- method = &twl4030_conversion_methods[req->method];
- /* Select channels to be converted */
- ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, ch_msb, method->sel + 1);
- if (ret) {
- dev_err(twl4030_madc->dev,
- "unable to write sel register 0x%X\n", method->sel + 1);
- goto out;
- }
- ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, ch_lsb, method->sel);
- if (ret) {
- dev_err(twl4030_madc->dev,
- "unable to write sel register 0x%X\n", method->sel + 1);
- goto out;
- }
- /* Select averaging for all channels if do_avg is set */
- if (req->do_avg) {
- ret = twl_i2c_write_u8(TWL4030_MODULE_MADC,
- ch_msb, method->avg + 1);
- if (ret) {
- dev_err(twl4030_madc->dev,
- "unable to write avg register 0x%X\n",
- method->avg + 1);
- goto out;
- }
- ret = twl_i2c_write_u8(TWL4030_MODULE_MADC,
- ch_lsb, method->avg);
- if (ret) {
- dev_err(twl4030_madc->dev,
- "unable to write sel reg 0x%X\n",
- method->sel + 1);
- goto out;
- }
- }
- if (req->type == TWL4030_MADC_IRQ_ONESHOT && req->func_cb != NULL) {
- ret = twl4030_madc_set_irq(twl4030_madc, req);
- if (ret < 0)
- goto out;
- ret = twl4030_madc_start_conversion(twl4030_madc, req->method);
- if (ret < 0)
- goto out;
- twl4030_madc->requests[req->method].active = 1;
- ret = 0;
- goto out;
- }
- /* With RT method we should not be here anymore */
- if (req->method == TWL4030_MADC_RT) {
- ret = -EINVAL;
- goto out;
- }
- ret = twl4030_madc_start_conversion(twl4030_madc, req->method);
- if (ret < 0)
- goto out;
- twl4030_madc->requests[req->method].active = 1;
- /* Wait until conversion is ready (ctrl register returns EOC) */
- ret = twl4030_madc_wait_conversion_ready(twl4030_madc, 5, method->ctrl);
- if (ret) {
- twl4030_madc->requests[req->method].active = 0;
- goto out;
- }
- ret = twl4030_madc_read_channels(twl4030_madc, method->rbase,
- req->channels, req->rbuf, req->raw);
- twl4030_madc->requests[req->method].active = 0;
-
-out:
- mutex_unlock(&twl4030_madc->lock);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(twl4030_madc_conversion);
-
-/*
- * Return channel value
- * Or < 0 on failure.
- */
-int twl4030_get_madc_conversion(int channel_no)
-{
- struct twl4030_madc_request req;
- int temp = 0;
- int ret;
-
- req.channels = (1 << channel_no);
- req.method = TWL4030_MADC_SW2;
- req.active = 0;
- req.func_cb = NULL;
- ret = twl4030_madc_conversion(&req);
- if (ret < 0)
- return ret;
- if (req.rbuf[channel_no] > 0)
- temp = req.rbuf[channel_no];
-
- return temp;
-}
-EXPORT_SYMBOL_GPL(twl4030_get_madc_conversion);
-
-/*
- * Function to enable or disable bias current for
- * main battery type reading or temperature sensing
- * @madc - pointer to twl4030_madc_data struct
- * @chan - can be one of the two values
- * TWL4030_BCI_ITHEN - Enables bias current for main battery type reading
- * TWL4030_BCI_TYPEN - Enables bias current for main battery temperature
- * sensing
- * @on - enable or disable chan.
- */
-static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc,
- int chan, int on)
-{
- int ret;
- u8 regval;
-
- ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE,
- &regval, TWL4030_BCI_BCICTL1);
- if (ret) {
- dev_err(madc->dev, "unable to read BCICTL1 reg 0x%X",
- TWL4030_BCI_BCICTL1);
- return ret;
- }
- if (on)
- regval |= chan ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN;
- else
- regval &= chan ? ~TWL4030_BCI_ITHEN : ~TWL4030_BCI_TYPEN;
- ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
- regval, TWL4030_BCI_BCICTL1);
- if (ret) {
- dev_err(madc->dev, "unable to write BCICTL1 reg 0x%X\n",
- TWL4030_BCI_BCICTL1);
- return ret;
- }
-
- return 0;
-}
-
-/*
- * Function that sets MADC software power on bit to enable MADC
- * @madc - pointer to twl4030_madc_data struct
- * @on - Enable or disable MADC software powen on bit.
- * returns error if i2c read/write fails else 0
- */
-static int twl4030_madc_set_power(struct twl4030_madc_data *madc, int on)
-{
- u8 regval;
- int ret;
-
- ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE,
- &regval, TWL4030_MADC_CTRL1);
- if (ret) {
- dev_err(madc->dev, "unable to read madc ctrl1 reg 0x%X\n",
- TWL4030_MADC_CTRL1);
- return ret;
- }
- if (on)
- regval |= TWL4030_MADC_MADCON;
- else
- regval &= ~TWL4030_MADC_MADCON;
- ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, regval, TWL4030_MADC_CTRL1);
- if (ret) {
- dev_err(madc->dev, "unable to write madc ctrl1 reg 0x%X\n",
- TWL4030_MADC_CTRL1);
- return ret;
- }
-
- return 0;
-}
-
-/*
- * Initialize MADC and request for threaded irq
- */
-static int twl4030_madc_probe(struct platform_device *pdev)
-{
- struct twl4030_madc_data *madc;
- struct twl4030_madc_platform_data *pdata = dev_get_platdata(&pdev->dev);
- int ret;
- u8 regval;
-
- if (!pdata) {
- dev_err(&pdev->dev, "platform_data not available\n");
- return -EINVAL;
- }
- madc = kzalloc(sizeof(*madc), GFP_KERNEL);
- if (!madc)
- return -ENOMEM;
-
- madc->dev = &pdev->dev;
-
- /*
- * Phoenix provides 2 interrupt lines. The first one is connected to
- * the OMAP. The other one can be connected to the other processor such
- * as modem. Hence two separate ISR and IMR registers.
- */
- madc->imr = (pdata->irq_line == 1) ?
- TWL4030_MADC_IMR1 : TWL4030_MADC_IMR2;
- madc->isr = (pdata->irq_line == 1) ?
- TWL4030_MADC_ISR1 : TWL4030_MADC_ISR2;
- ret = twl4030_madc_set_power(madc, 1);
- if (ret < 0)
- goto err_power;
- ret = twl4030_madc_set_current_generator(madc, 0, 1);
- if (ret < 0)
- goto err_current_generator;
-
- ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE,
- &regval, TWL4030_BCI_BCICTL1);
- if (ret) {
- dev_err(&pdev->dev, "unable to read reg BCI CTL1 0x%X\n",
- TWL4030_BCI_BCICTL1);
- goto err_i2c;
- }
- regval |= TWL4030_BCI_MESBAT;
- ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
- regval, TWL4030_BCI_BCICTL1);
- if (ret) {
- dev_err(&pdev->dev, "unable to write reg BCI Ctl1 0x%X\n",
- TWL4030_BCI_BCICTL1);
- goto err_i2c;
- }
-
- /* Check that MADC clock is on */
- ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &regval, TWL4030_REG_GPBR1);
- if (ret) {
- dev_err(&pdev->dev, "unable to read reg GPBR1 0x%X\n",
- TWL4030_REG_GPBR1);
- goto err_i2c;
- }
-
- /* If MADC clk is not on, turn it on */
- if (!(regval & TWL4030_GPBR1_MADC_HFCLK_EN)) {
- dev_info(&pdev->dev, "clk disabled, enabling\n");
- regval |= TWL4030_GPBR1_MADC_HFCLK_EN;
- ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, regval,
- TWL4030_REG_GPBR1);
- if (ret) {
- dev_err(&pdev->dev, "unable to write reg GPBR1 0x%X\n",
- TWL4030_REG_GPBR1);
- goto err_i2c;
- }
- }
-
- platform_set_drvdata(pdev, madc);
- mutex_init(&madc->lock);
- ret = request_threaded_irq(platform_get_irq(pdev, 0), NULL,
- twl4030_madc_threaded_irq_handler,
- IRQF_TRIGGER_RISING, "twl4030_madc", madc);
- if (ret) {
- dev_dbg(&pdev->dev, "could not request irq\n");
- goto err_i2c;
- }
- twl4030_madc = madc;
- return 0;
-err_i2c:
- twl4030_madc_set_current_generator(madc, 0, 0);
-err_current_generator:
- twl4030_madc_set_power(madc, 0);
-err_power:
- kfree(madc);
-
- return ret;
-}
-
-static int twl4030_madc_remove(struct platform_device *pdev)
-{
- struct twl4030_madc_data *madc = platform_get_drvdata(pdev);
-
- free_irq(platform_get_irq(pdev, 0), madc);
- twl4030_madc_set_current_generator(madc, 0, 0);
- twl4030_madc_set_power(madc, 0);
- kfree(madc);
-
- return 0;
-}
-
-static struct platform_driver twl4030_madc_driver = {
- .probe = twl4030_madc_probe,
- .remove = twl4030_madc_remove,
- .driver = {
- .name = "twl4030_madc",
- .owner = THIS_MODULE,
- },
-};
-
-module_platform_driver(twl4030_madc_driver);
-
-MODULE_DESCRIPTION("TWL4030 ADC driver");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("J Keerthy");
-MODULE_ALIAS("platform:twl4030_madc");
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index 18a607e2ca06..a6bb17d908b8 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -31,7 +31,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/init.h>
#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
index 75316fb33448..6e88f25832fb 100644
--- a/drivers/mfd/twl6040.c
+++ b/drivers/mfd/twl6040.c
@@ -661,6 +661,11 @@ static int twl6040_probe(struct i2c_client *client,
init_completion(&twl6040->ready);
twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
+ if (twl6040->rev < 0) {
+ dev_err(&client->dev, "Failed to read revision register: %d\n",
+ twl6040->rev);
+ goto gpio_err;
+ }
/* ERRATA: Automatic power-up is not possible in ES1.0 */
if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
@@ -703,7 +708,6 @@ static int twl6040_probe(struct i2c_client *client,
}
/* dual-access registers controlled by I2C only */
- twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL);
regmap_register_patch(twl6040->regmap, twl6040_patch,
ARRAY_SIZE(twl6040_patch));
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index 0313f839e8fa..153d595afaac 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -742,9 +742,7 @@ static int ucb1x00_resume(struct device *dev)
}
#endif
-static const struct dev_pm_ops ucb1x00_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(ucb1x00_suspend, ucb1x00_resume)
-};
+static SIMPLE_DEV_PM_OPS(ucb1x00_pm_ops, ucb1x00_suspend, ucb1x00_resume);
static struct mcp_driver ucb1x00_driver = {
.drv = {
diff --git a/drivers/mfd/vexpress-config.c b/drivers/mfd/vexpress-config.c
index 84ce6b9daa3d..d0db89d13e01 100644
--- a/drivers/mfd/vexpress-config.c
+++ b/drivers/mfd/vexpress-config.c
@@ -16,7 +16,6 @@
#include <linux/bitops.h>
#include <linux/completion.h>
#include <linux/export.h>
-#include <linux/init.h>
#include <linux/list.h>
#include <linux/of.h>
#include <linux/of_device.h>
@@ -27,7 +26,7 @@
#define VEXPRESS_CONFIG_MAX_BRIDGES 2
-struct vexpress_config_bridge {
+static struct vexpress_config_bridge {
struct device_node *node;
struct vexpress_config_bridge_info *info;
struct list_head transactions;
diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
index 981bef4b7ebc..35281e804e7e 100644
--- a/drivers/mfd/vexpress-sysreg.c
+++ b/drivers/mfd/vexpress-sysreg.c
@@ -168,7 +168,7 @@ static void *vexpress_sysreg_config_func_get(struct device *dev,
struct device_node *node)
{
struct vexpress_sysreg_config_func *config_func;
- u32 site;
+ u32 site = 0;
u32 position = 0;
u32 dcc = 0;
u32 func_device[2];
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index bffc584e4a43..070f8cfbbd7a 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -73,6 +73,7 @@ static const struct reg_default wm5102_revb_patch[] = {
{ 0x171, 0x0000 },
{ 0x35E, 0x000C },
{ 0x2D4, 0x0000 },
+ { 0x4DC, 0x0900 },
{ 0x80, 0x0000 },
};
@@ -1839,6 +1840,23 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP1_STATUS_1:
case ARIZONA_DSP1_STATUS_2:
case ARIZONA_DSP1_STATUS_3:
+ case ARIZONA_DSP1_WDMA_BUFFER_1:
+ case ARIZONA_DSP1_WDMA_BUFFER_2:
+ case ARIZONA_DSP1_WDMA_BUFFER_3:
+ case ARIZONA_DSP1_WDMA_BUFFER_4:
+ case ARIZONA_DSP1_WDMA_BUFFER_5:
+ case ARIZONA_DSP1_WDMA_BUFFER_6:
+ case ARIZONA_DSP1_WDMA_BUFFER_7:
+ case ARIZONA_DSP1_WDMA_BUFFER_8:
+ case ARIZONA_DSP1_RDMA_BUFFER_1:
+ case ARIZONA_DSP1_RDMA_BUFFER_2:
+ case ARIZONA_DSP1_RDMA_BUFFER_3:
+ case ARIZONA_DSP1_RDMA_BUFFER_4:
+ case ARIZONA_DSP1_RDMA_BUFFER_5:
+ case ARIZONA_DSP1_RDMA_BUFFER_6:
+ case ARIZONA_DSP1_WDMA_CONFIG_1:
+ case ARIZONA_DSP1_WDMA_CONFIG_2:
+ case ARIZONA_DSP1_RDMA_CONFIG_1:
case ARIZONA_DSP1_SCRATCH_0:
case ARIZONA_DSP1_SCRATCH_1:
case ARIZONA_DSP1_SCRATCH_2:
@@ -1894,9 +1912,27 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
case ARIZONA_AOD_IRQ1:
case ARIZONA_AOD_IRQ2:
case ARIZONA_AOD_IRQ_RAW_STATUS:
+ case ARIZONA_DSP1_CLOCKING_1:
case ARIZONA_DSP1_STATUS_1:
case ARIZONA_DSP1_STATUS_2:
case ARIZONA_DSP1_STATUS_3:
+ case ARIZONA_DSP1_WDMA_BUFFER_1:
+ case ARIZONA_DSP1_WDMA_BUFFER_2:
+ case ARIZONA_DSP1_WDMA_BUFFER_3:
+ case ARIZONA_DSP1_WDMA_BUFFER_4:
+ case ARIZONA_DSP1_WDMA_BUFFER_5:
+ case ARIZONA_DSP1_WDMA_BUFFER_6:
+ case ARIZONA_DSP1_WDMA_BUFFER_7:
+ case ARIZONA_DSP1_WDMA_BUFFER_8:
+ case ARIZONA_DSP1_RDMA_BUFFER_1:
+ case ARIZONA_DSP1_RDMA_BUFFER_2:
+ case ARIZONA_DSP1_RDMA_BUFFER_3:
+ case ARIZONA_DSP1_RDMA_BUFFER_4:
+ case ARIZONA_DSP1_RDMA_BUFFER_5:
+ case ARIZONA_DSP1_RDMA_BUFFER_6:
+ case ARIZONA_DSP1_WDMA_CONFIG_1:
+ case ARIZONA_DSP1_WDMA_CONFIG_2:
+ case ARIZONA_DSP1_RDMA_CONFIG_1:
case ARIZONA_DSP1_SCRATCH_0:
case ARIZONA_DSP1_SCRATCH_1:
case ARIZONA_DSP1_SCRATCH_2:
diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index 11632f135e8c..1942b6f231da 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -538,7 +538,7 @@ static const struct reg_default wm5110_reg_default[] = {
{ 0x00000219, 0x01A6 }, /* R537 - Mic Bias Ctrl 2 */
{ 0x0000021A, 0x01A6 }, /* R538 - Mic Bias Ctrl 3 */
{ 0x00000293, 0x0000 }, /* R659 - Accessory Detect Mode 1 */
- { 0x0000029B, 0x0020 }, /* R667 - Headphone Detect 1 */
+ { 0x0000029B, 0x0028 }, /* R667 - Headphone Detect 1 */
{ 0x0000029C, 0x0000 }, /* R668 - Headphone Detect 2 */
{ 0x000002A2, 0x0000 }, /* R674 - Micd clamp control */
{ 0x000002A3, 0x1102 }, /* R675 - Mic Detect 1 */
@@ -2461,6 +2461,27 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP1_STATUS_1:
case ARIZONA_DSP1_STATUS_2:
case ARIZONA_DSP1_STATUS_3:
+ case ARIZONA_DSP1_STATUS_4:
+ case ARIZONA_DSP1_WDMA_BUFFER_1:
+ case ARIZONA_DSP1_WDMA_BUFFER_2:
+ case ARIZONA_DSP1_WDMA_BUFFER_3:
+ case ARIZONA_DSP1_WDMA_BUFFER_4:
+ case ARIZONA_DSP1_WDMA_BUFFER_5:
+ case ARIZONA_DSP1_WDMA_BUFFER_6:
+ case ARIZONA_DSP1_WDMA_BUFFER_7:
+ case ARIZONA_DSP1_WDMA_BUFFER_8:
+ case ARIZONA_DSP1_RDMA_BUFFER_1:
+ case ARIZONA_DSP1_RDMA_BUFFER_2:
+ case ARIZONA_DSP1_RDMA_BUFFER_3:
+ case ARIZONA_DSP1_RDMA_BUFFER_4:
+ case ARIZONA_DSP1_RDMA_BUFFER_5:
+ case ARIZONA_DSP1_RDMA_BUFFER_6:
+ case ARIZONA_DSP1_WDMA_CONFIG_1:
+ case ARIZONA_DSP1_WDMA_CONFIG_2:
+ case ARIZONA_DSP1_WDMA_OFFSET_1:
+ case ARIZONA_DSP1_RDMA_CONFIG_1:
+ case ARIZONA_DSP1_RDMA_OFFSET_1:
+ case ARIZONA_DSP1_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP1_SCRATCH_0:
case ARIZONA_DSP1_SCRATCH_1:
case ARIZONA_DSP1_SCRATCH_2:
@@ -2470,6 +2491,27 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP2_STATUS_1:
case ARIZONA_DSP2_STATUS_2:
case ARIZONA_DSP2_STATUS_3:
+ case ARIZONA_DSP2_STATUS_4:
+ case ARIZONA_DSP2_WDMA_BUFFER_1:
+ case ARIZONA_DSP2_WDMA_BUFFER_2:
+ case ARIZONA_DSP2_WDMA_BUFFER_3:
+ case ARIZONA_DSP2_WDMA_BUFFER_4:
+ case ARIZONA_DSP2_WDMA_BUFFER_5:
+ case ARIZONA_DSP2_WDMA_BUFFER_6:
+ case ARIZONA_DSP2_WDMA_BUFFER_7:
+ case ARIZONA_DSP2_WDMA_BUFFER_8:
+ case ARIZONA_DSP2_RDMA_BUFFER_1:
+ case ARIZONA_DSP2_RDMA_BUFFER_2:
+ case ARIZONA_DSP2_RDMA_BUFFER_3:
+ case ARIZONA_DSP2_RDMA_BUFFER_4:
+ case ARIZONA_DSP2_RDMA_BUFFER_5:
+ case ARIZONA_DSP2_RDMA_BUFFER_6:
+ case ARIZONA_DSP2_WDMA_CONFIG_1:
+ case ARIZONA_DSP2_WDMA_CONFIG_2:
+ case ARIZONA_DSP2_WDMA_OFFSET_1:
+ case ARIZONA_DSP2_RDMA_CONFIG_1:
+ case ARIZONA_DSP2_RDMA_OFFSET_1:
+ case ARIZONA_DSP2_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP2_SCRATCH_0:
case ARIZONA_DSP2_SCRATCH_1:
case ARIZONA_DSP2_SCRATCH_2:
@@ -2479,6 +2521,27 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP3_STATUS_1:
case ARIZONA_DSP3_STATUS_2:
case ARIZONA_DSP3_STATUS_3:
+ case ARIZONA_DSP3_STATUS_4:
+ case ARIZONA_DSP3_WDMA_BUFFER_1:
+ case ARIZONA_DSP3_WDMA_BUFFER_2:
+ case ARIZONA_DSP3_WDMA_BUFFER_3:
+ case ARIZONA_DSP3_WDMA_BUFFER_4:
+ case ARIZONA_DSP3_WDMA_BUFFER_5:
+ case ARIZONA_DSP3_WDMA_BUFFER_6:
+ case ARIZONA_DSP3_WDMA_BUFFER_7:
+ case ARIZONA_DSP3_WDMA_BUFFER_8:
+ case ARIZONA_DSP3_RDMA_BUFFER_1:
+ case ARIZONA_DSP3_RDMA_BUFFER_2:
+ case ARIZONA_DSP3_RDMA_BUFFER_3:
+ case ARIZONA_DSP3_RDMA_BUFFER_4:
+ case ARIZONA_DSP3_RDMA_BUFFER_5:
+ case ARIZONA_DSP3_RDMA_BUFFER_6:
+ case ARIZONA_DSP3_WDMA_CONFIG_1:
+ case ARIZONA_DSP3_WDMA_CONFIG_2:
+ case ARIZONA_DSP3_WDMA_OFFSET_1:
+ case ARIZONA_DSP3_RDMA_CONFIG_1:
+ case ARIZONA_DSP3_RDMA_OFFSET_1:
+ case ARIZONA_DSP3_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP3_SCRATCH_0:
case ARIZONA_DSP3_SCRATCH_1:
case ARIZONA_DSP3_SCRATCH_2:
@@ -2488,6 +2551,27 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP4_STATUS_1:
case ARIZONA_DSP4_STATUS_2:
case ARIZONA_DSP4_STATUS_3:
+ case ARIZONA_DSP4_STATUS_4:
+ case ARIZONA_DSP4_WDMA_BUFFER_1:
+ case ARIZONA_DSP4_WDMA_BUFFER_2:
+ case ARIZONA_DSP4_WDMA_BUFFER_3:
+ case ARIZONA_DSP4_WDMA_BUFFER_4:
+ case ARIZONA_DSP4_WDMA_BUFFER_5:
+ case ARIZONA_DSP4_WDMA_BUFFER_6:
+ case ARIZONA_DSP4_WDMA_BUFFER_7:
+ case ARIZONA_DSP4_WDMA_BUFFER_8:
+ case ARIZONA_DSP4_RDMA_BUFFER_1:
+ case ARIZONA_DSP4_RDMA_BUFFER_2:
+ case ARIZONA_DSP4_RDMA_BUFFER_3:
+ case ARIZONA_DSP4_RDMA_BUFFER_4:
+ case ARIZONA_DSP4_RDMA_BUFFER_5:
+ case ARIZONA_DSP4_RDMA_BUFFER_6:
+ case ARIZONA_DSP4_WDMA_CONFIG_1:
+ case ARIZONA_DSP4_WDMA_CONFIG_2:
+ case ARIZONA_DSP4_WDMA_OFFSET_1:
+ case ARIZONA_DSP4_RDMA_CONFIG_1:
+ case ARIZONA_DSP4_RDMA_OFFSET_1:
+ case ARIZONA_DSP4_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP4_SCRATCH_0:
case ARIZONA_DSP4_SCRATCH_1:
case ARIZONA_DSP4_SCRATCH_2:
@@ -2543,31 +2627,119 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP1_STATUS_1:
case ARIZONA_DSP1_STATUS_2:
case ARIZONA_DSP1_STATUS_3:
+ case ARIZONA_DSP1_STATUS_4:
+ case ARIZONA_DSP1_WDMA_BUFFER_1:
+ case ARIZONA_DSP1_WDMA_BUFFER_2:
+ case ARIZONA_DSP1_WDMA_BUFFER_3:
+ case ARIZONA_DSP1_WDMA_BUFFER_4:
+ case ARIZONA_DSP1_WDMA_BUFFER_5:
+ case ARIZONA_DSP1_WDMA_BUFFER_6:
+ case ARIZONA_DSP1_WDMA_BUFFER_7:
+ case ARIZONA_DSP1_WDMA_BUFFER_8:
+ case ARIZONA_DSP1_RDMA_BUFFER_1:
+ case ARIZONA_DSP1_RDMA_BUFFER_2:
+ case ARIZONA_DSP1_RDMA_BUFFER_3:
+ case ARIZONA_DSP1_RDMA_BUFFER_4:
+ case ARIZONA_DSP1_RDMA_BUFFER_5:
+ case ARIZONA_DSP1_RDMA_BUFFER_6:
+ case ARIZONA_DSP1_WDMA_CONFIG_1:
+ case ARIZONA_DSP1_WDMA_CONFIG_2:
+ case ARIZONA_DSP1_WDMA_OFFSET_1:
+ case ARIZONA_DSP1_RDMA_CONFIG_1:
+ case ARIZONA_DSP1_RDMA_OFFSET_1:
+ case ARIZONA_DSP1_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP1_SCRATCH_0:
case ARIZONA_DSP1_SCRATCH_1:
case ARIZONA_DSP1_SCRATCH_2:
case ARIZONA_DSP1_SCRATCH_3:
+ case ARIZONA_DSP1_CLOCKING_1:
case ARIZONA_DSP2_STATUS_1:
case ARIZONA_DSP2_STATUS_2:
case ARIZONA_DSP2_STATUS_3:
+ case ARIZONA_DSP2_STATUS_4:
+ case ARIZONA_DSP2_WDMA_BUFFER_1:
+ case ARIZONA_DSP2_WDMA_BUFFER_2:
+ case ARIZONA_DSP2_WDMA_BUFFER_3:
+ case ARIZONA_DSP2_WDMA_BUFFER_4:
+ case ARIZONA_DSP2_WDMA_BUFFER_5:
+ case ARIZONA_DSP2_WDMA_BUFFER_6:
+ case ARIZONA_DSP2_WDMA_BUFFER_7:
+ case ARIZONA_DSP2_WDMA_BUFFER_8:
+ case ARIZONA_DSP2_RDMA_BUFFER_1:
+ case ARIZONA_DSP2_RDMA_BUFFER_2:
+ case ARIZONA_DSP2_RDMA_BUFFER_3:
+ case ARIZONA_DSP2_RDMA_BUFFER_4:
+ case ARIZONA_DSP2_RDMA_BUFFER_5:
+ case ARIZONA_DSP2_RDMA_BUFFER_6:
+ case ARIZONA_DSP2_WDMA_CONFIG_1:
+ case ARIZONA_DSP2_WDMA_CONFIG_2:
+ case ARIZONA_DSP2_WDMA_OFFSET_1:
+ case ARIZONA_DSP2_RDMA_CONFIG_1:
+ case ARIZONA_DSP2_RDMA_OFFSET_1:
+ case ARIZONA_DSP2_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP2_SCRATCH_0:
case ARIZONA_DSP2_SCRATCH_1:
case ARIZONA_DSP2_SCRATCH_2:
case ARIZONA_DSP2_SCRATCH_3:
+ case ARIZONA_DSP2_CLOCKING_1:
case ARIZONA_DSP3_STATUS_1:
case ARIZONA_DSP3_STATUS_2:
case ARIZONA_DSP3_STATUS_3:
+ case ARIZONA_DSP3_STATUS_4:
+ case ARIZONA_DSP3_WDMA_BUFFER_1:
+ case ARIZONA_DSP3_WDMA_BUFFER_2:
+ case ARIZONA_DSP3_WDMA_BUFFER_3:
+ case ARIZONA_DSP3_WDMA_BUFFER_4:
+ case ARIZONA_DSP3_WDMA_BUFFER_5:
+ case ARIZONA_DSP3_WDMA_BUFFER_6:
+ case ARIZONA_DSP3_WDMA_BUFFER_7:
+ case ARIZONA_DSP3_WDMA_BUFFER_8:
+ case ARIZONA_DSP3_RDMA_BUFFER_1:
+ case ARIZONA_DSP3_RDMA_BUFFER_2:
+ case ARIZONA_DSP3_RDMA_BUFFER_3:
+ case ARIZONA_DSP3_RDMA_BUFFER_4:
+ case ARIZONA_DSP3_RDMA_BUFFER_5:
+ case ARIZONA_DSP3_RDMA_BUFFER_6:
+ case ARIZONA_DSP3_WDMA_CONFIG_1:
+ case ARIZONA_DSP3_WDMA_CONFIG_2:
+ case ARIZONA_DSP3_WDMA_OFFSET_1:
+ case ARIZONA_DSP3_RDMA_CONFIG_1:
+ case ARIZONA_DSP3_RDMA_OFFSET_1:
+ case ARIZONA_DSP3_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP3_SCRATCH_0:
case ARIZONA_DSP3_SCRATCH_1:
case ARIZONA_DSP3_SCRATCH_2:
case ARIZONA_DSP3_SCRATCH_3:
+ case ARIZONA_DSP3_CLOCKING_1:
case ARIZONA_DSP4_STATUS_1:
case ARIZONA_DSP4_STATUS_2:
case ARIZONA_DSP4_STATUS_3:
+ case ARIZONA_DSP4_STATUS_4:
+ case ARIZONA_DSP4_WDMA_BUFFER_1:
+ case ARIZONA_DSP4_WDMA_BUFFER_2:
+ case ARIZONA_DSP4_WDMA_BUFFER_3:
+ case ARIZONA_DSP4_WDMA_BUFFER_4:
+ case ARIZONA_DSP4_WDMA_BUFFER_5:
+ case ARIZONA_DSP4_WDMA_BUFFER_6:
+ case ARIZONA_DSP4_WDMA_BUFFER_7:
+ case ARIZONA_DSP4_WDMA_BUFFER_8:
+ case ARIZONA_DSP4_RDMA_BUFFER_1:
+ case ARIZONA_DSP4_RDMA_BUFFER_2:
+ case ARIZONA_DSP4_RDMA_BUFFER_3:
+ case ARIZONA_DSP4_RDMA_BUFFER_4:
+ case ARIZONA_DSP4_RDMA_BUFFER_5:
+ case ARIZONA_DSP4_RDMA_BUFFER_6:
+ case ARIZONA_DSP4_WDMA_CONFIG_1:
+ case ARIZONA_DSP4_WDMA_CONFIG_2:
+ case ARIZONA_DSP4_WDMA_OFFSET_1:
+ case ARIZONA_DSP4_RDMA_CONFIG_1:
+ case ARIZONA_DSP4_RDMA_OFFSET_1:
+ case ARIZONA_DSP4_EXTERNAL_START_SELECT_1:
case ARIZONA_DSP4_SCRATCH_0:
case ARIZONA_DSP4_SCRATCH_1:
case ARIZONA_DSP4_SCRATCH_2:
case ARIZONA_DSP4_SCRATCH_3:
+ case ARIZONA_DSP4_CLOCKING_1:
return true;
default:
return wm5110_is_adsp_memory(dev, reg);
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index 7c1ae24605d9..4ab527f5c53b 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/bug.h>
#include <linux/device.h>
diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c
index 624ff90501cd..cd01f7962dfd 100644
--- a/drivers/mfd/wm8350-irq.c
+++ b/drivers/mfd/wm8350-irq.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/bug.h>
#include <linux/device.h>
#include <linux/interrupt.h>
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index d66d256551fb..e5eae751aa1b 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -161,31 +161,19 @@ static int wm8400_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8400 *wm8400;
- int ret;
wm8400 = devm_kzalloc(&i2c->dev, sizeof(struct wm8400), GFP_KERNEL);
- if (wm8400 == NULL) {
- ret = -ENOMEM;
- goto err;
- }
+ if (!wm8400)
+ return -ENOMEM;
wm8400->regmap = devm_regmap_init_i2c(i2c, &wm8400_regmap_config);
- if (IS_ERR(wm8400->regmap)) {
- ret = PTR_ERR(wm8400->regmap);
- goto err;
- }
+ if (IS_ERR(wm8400->regmap))
+ return PTR_ERR(wm8400->regmap);
wm8400->dev = &i2c->dev;
i2c_set_clientdata(i2c, wm8400);
- ret = wm8400_init(wm8400, dev_get_platdata(&i2c->dev));
- if (ret != 0)
- goto err;
-
- return 0;
-
-err:
- return ret;
+ return wm8400_init(wm8400, dev_get_platdata(&i2c->dev));
}
static int wm8400_i2c_remove(struct i2c_client *i2c)