Merge tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core framework:
   - Add the MFD bindings doc to MAINTAINERS

  New drivers:
   - X-Powers AC100 Audio CODEC and RTC
   - TI LP873x PMIC
   - Rockchip RK808 PMIC
   - Samsung Exynos Low Power Audio

  New device support:
   - Add support for STMPE1600 variant to stmpe
   - Add support for PM8018 PMIC to pm8921-core
   - Add support for AXP806 PMIC in axp20x
   - Add support for AXP209 GPIO in axp20x

  New functionality:
   - Add support for Reset to all STMPE variants
   - Add support for MKBP event support to cros_ec
   - Add support for USB to intel_soc_pmic_bxtwc
   - Add support for IRQs and Power Button to tps65217

  Fix-ups:
   - Clean-up defunct author emails (da9063, max14577)
   - Kconfig fixups (wm8350-i2c, as37220
   - Constify (altera-a10sr, sm501)
   - Supply PCI IDs (intel-lpss-pci)
   - Improve clocking (qcom_rpm)
   - Fix IRQ probing (ucb1x00-core)
   - Ensure fault log is cleared (da9052)
   - Remove NO_IRQ check (ucb1x00-core)
   - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci)
   - Non standard declaration (tps65217, max8997-irq)
   - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs,
     cros_ec_spi)
   - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099,
     sun6i-prcm, twl-core)
   - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x,
     lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona)

  Bugfixes:
   - Release OF pointer (qcom_rpm)
   - Avoid double shifting in suspend/resume (88pm80x)
   - Fix 'defined but not used' error (exynos-lpass)
   - Fix 'sleeping whilst attomic' (atmel-hlcdc)"

* tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
  mfd: arizona: Handle probe deferral for reset GPIO
  mfd: arizona: Remove arizona_of_get_named_gpio helper function
  mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config
  mfd: twl6040: Register child device for twl6040-pdmclk
  mfd: cros_ec_spi: Remove unused variable 'request'
  mfd: omap-usb-host: Return value is not 'const int'
  mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine()
  mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()
  mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls
  mfd: ab8500-debugfs: Prevent initialised field from being over-written
  mfd: max8997-irq: 'inline' should be at the beginning of the declaration
  mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer
  mfd: tps65217: Fix nonstandard declaration
  mfd: lp873x: Remove unused mutex lock from struct lp873x
  mfd: atmel-hlcdc: Do not sleep in atomic context
  mfd: exynos-lpass: Mark PM functions as __maybe_unused
  mfd: intel-lpss: Add default I2C device properties for Apollo Lake
  mfd: twl-core: Make it explicitly non-modular
  mfd: sun6i-prcm: Make it explicitly non-modular
  mfd: smsc-ece1099: Make it explicitly non-modular
  ...

1 files changed, 72 insertions, 0 deletions

diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
index 2e44323455dd..52fafea06067 100644
--- a/drivers/mfd/qcom_rpm.c
+++ b/drivers/mfd/qcom_rpm.c
@@ -21,6 +21,7 @@
 #include <linux/mfd/qcom_rpm.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
+#include <linux/clk.h>
 
 #include <dt-bindings/mfd/qcom-rpm.h>
 
@@ -48,6 +49,7 @@ struct qcom_rpm {
 	struct regmap *ipc_regmap;
 	unsigned ipc_offset;
 	unsigned ipc_bit;
+	struct clk *ramclk;
 
 	struct completion ack;
 	struct mutex lock;
@@ -388,11 +390,62 @@ static const struct qcom_rpm_data ipq806x_template = {
 	.ack_sel_size = 7,
 };
 
+static const struct qcom_rpm_resource mdm9615_rpm_resource_table[] = {
+	[QCOM_RPM_CXO_CLK] =			{ 25, 9, 5, 1 },
+	[QCOM_RPM_SYS_FABRIC_CLK] =		{ 26, 10, 9, 1 },
+	[QCOM_RPM_DAYTONA_FABRIC_CLK] =		{ 27, 11, 11, 1 },
+	[QCOM_RPM_SFPB_CLK] =			{ 28, 12, 12, 1 },
+	[QCOM_RPM_CFPB_CLK] =			{ 29, 13, 13, 1 },
+	[QCOM_RPM_EBI1_CLK] =			{ 30, 14, 16, 1 },
+	[QCOM_RPM_APPS_FABRIC_HALT] =		{ 31, 15, 22, 2 },
+	[QCOM_RPM_APPS_FABRIC_MODE] =		{ 33, 16, 23, 3 },
+	[QCOM_RPM_APPS_FABRIC_IOCTL] =		{ 36, 17, 24, 1 },
+	[QCOM_RPM_APPS_FABRIC_ARB] =		{ 37, 18, 25, 27 },
+	[QCOM_RPM_PM8018_SMPS1] =		{ 64, 19, 30, 2 },
+	[QCOM_RPM_PM8018_SMPS2] =		{ 66, 21, 31, 2 },
+	[QCOM_RPM_PM8018_SMPS3] =		{ 68, 23, 32, 2 },
+	[QCOM_RPM_PM8018_SMPS4] =		{ 70, 25, 33, 2 },
+	[QCOM_RPM_PM8018_SMPS5] =		{ 72, 27, 34, 2 },
+	[QCOM_RPM_PM8018_LDO1] =		{ 74, 29, 35, 2 },
+	[QCOM_RPM_PM8018_LDO2] =		{ 76, 31, 36, 2 },
+	[QCOM_RPM_PM8018_LDO3] =		{ 78, 33, 37, 2 },
+	[QCOM_RPM_PM8018_LDO4] =		{ 80, 35, 38, 2 },
+	[QCOM_RPM_PM8018_LDO5] =		{ 82, 37, 39, 2 },
+	[QCOM_RPM_PM8018_LDO6] =		{ 84, 39, 40, 2 },
+	[QCOM_RPM_PM8018_LDO7] =		{ 86, 41, 41, 2 },
+	[QCOM_RPM_PM8018_LDO8] =		{ 88, 43, 42, 2 },
+	[QCOM_RPM_PM8018_LDO9] =		{ 90, 45, 43, 2 },
+	[QCOM_RPM_PM8018_LDO10] =		{ 92, 47, 44, 2 },
+	[QCOM_RPM_PM8018_LDO11] =		{ 94, 49, 45, 2 },
+	[QCOM_RPM_PM8018_LDO12] =		{ 96, 51, 46, 2 },
+	[QCOM_RPM_PM8018_LDO13] =		{ 98, 53, 47, 2 },
+	[QCOM_RPM_PM8018_LDO14] =		{ 100, 55, 48, 2 },
+	[QCOM_RPM_PM8018_LVS1] =		{ 102, 57, 49, 1 },
+	[QCOM_RPM_PM8018_NCP] =			{ 103, 58, 80, 2 },
+	[QCOM_RPM_CXO_BUFFERS] =		{ 105, 60, 81, 1 },
+	[QCOM_RPM_USB_OTG_SWITCH] =		{ 106, 61, 82, 1 },
+	[QCOM_RPM_HDMI_SWITCH] =		{ 107, 62, 83, 1 },
+	[QCOM_RPM_VOLTAGE_CORNER] =		{ 109, 64, 87, 1 },
+};
+
+static const struct qcom_rpm_data mdm9615_template = {
+	.version = 3,
+	.resource_table = mdm9615_rpm_resource_table,
+	.n_resources = ARRAY_SIZE(mdm9615_rpm_resource_table),
+	.req_ctx_off = 3,
+	.req_sel_off = 11,
+	.ack_ctx_off = 15,
+	.ack_sel_off = 23,
+	.req_sel_size = 4,
+	.ack_sel_size = 7,
+};
+
 static const struct of_device_id qcom_rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
 	{ .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
 	{ .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
 	{ .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template },
+	{ .compatible = "qcom,rpm-mdm9615", .data = &mdm9615_template },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
@@ -501,6 +554,20 @@ static int qcom_rpm_probe(struct platform_device *pdev)
 	mutex_init(&rpm->lock);
 	init_completion(&rpm->ack);
 
+	/* Enable message RAM clock */
+	rpm->ramclk = devm_clk_get(&pdev->dev, "ram");
+	if (IS_ERR(rpm->ramclk)) {
+		ret = PTR_ERR(rpm->ramclk);
+		if (ret == -EPROBE_DEFER)
+			return ret;
+		/*
+		 * Fall through in all other cases, as the clock is
+		 * optional. (Does not exist on all platforms.)
+		 */
+		rpm->ramclk = NULL;
+	}
+	clk_prepare_enable(rpm->ramclk); /* Accepts NULL */
+
 	irq_ack = platform_get_irq_byname(pdev, "ack");
 	if (irq_ack < 0) {
 		dev_err(&pdev->dev, "required ack interrupt missing\n");
@@ -538,6 +605,7 @@ static int qcom_rpm_probe(struct platform_device *pdev)
 	}
 
 	rpm->ipc_regmap = syscon_node_to_regmap(syscon_np);
+	of_node_put(syscon_np);
 	if (IS_ERR(rpm->ipc_regmap))
 		return PTR_ERR(rpm->ipc_regmap);
 
@@ -620,7 +688,11 @@ static int qcom_rpm_probe(struct platform_device *pdev)
 
 static int qcom_rpm_remove(struct platform_device *pdev)
 {
+	struct qcom_rpm *rpm = dev_get_drvdata(&pdev->dev);
+
 	of_platform_depopulate(&pdev->dev);
+	clk_disable_unprepare(rpm->ramclk);
+
 	return 0;
 }