diff options
author | Johannes Stezenbach <js@linuxtv.org> | 2005-06-23 22:02:29 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-06-24 00:05:30 -0700 |
commit | b6a235b1186dda0800c8bedc2526830a4a36b44e (patch) | |
tree | 6fedc0a9e65f7474954ee35888461701a0cb0399 /drivers/media | |
parent | 3e05d2b8d3dd34b0237f489e991ed081cb0bf007 (diff) | |
download | linux-b6a235b1186dda0800c8bedc2526830a4a36b44e.tar.bz2 |
[PATCH] dvb: drop obsolete dibusb driver
Remove the dibusb driver which has been obsoleted by the generalized dvb-usb
driver.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/media')
-rw-r--r-- | drivers/media/dvb/Kconfig | 1 | ||||
-rw-r--r-- | drivers/media/dvb/Makefile | 2 | ||||
-rw-r--r-- | drivers/media/dvb/dibusb/Kconfig | 62 | ||||
-rw-r--r-- | drivers/media/dvb/dibusb/Makefile | 11 | ||||
-rw-r--r-- | drivers/media/dvb/dibusb/dvb-dibusb-core.c | 558 | ||||
-rw-r--r-- | drivers/media/dvb/dibusb/dvb-dibusb-dvb.c | 185 | ||||
-rw-r--r-- | drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c | 582 | ||||
-rw-r--r-- | drivers/media/dvb/dibusb/dvb-dibusb-firmware.c | 87 | ||||
-rw-r--r-- | drivers/media/dvb/dibusb/dvb-dibusb-remote.c | 316 | ||||
-rw-r--r-- | drivers/media/dvb/dibusb/dvb-dibusb-usb.c | 303 | ||||
-rw-r--r-- | drivers/media/dvb/dibusb/dvb-dibusb.h | 327 | ||||
-rw-r--r-- | drivers/media/dvb/dibusb/dvb-fe-dtt200u.c | 263 |
12 files changed, 1 insertions, 2696 deletions
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index 4983e1b1bb1d..b81abdfde378 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -29,7 +29,6 @@ comment "Supported USB Adapters" depends on DVB_CORE && USB source "drivers/media/dvb/ttusb-budget/Kconfig" source "drivers/media/dvb/ttusb-dec/Kconfig" -source "drivers/media/dvb/dibusb/Kconfig" source "drivers/media/dvb/cinergyT2/Kconfig" comment "Supported FlexCopII (B2C2) Adapters" diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile index 520fc3902819..d2dd914f7776 100644 --- a/drivers/media/dvb/Makefile +++ b/drivers/media/dvb/Makefile @@ -2,4 +2,4 @@ # Makefile for the kernel multimedia device drivers. # -obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dibusb/ cinergyT2/ +obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ cinergyT2/ diff --git a/drivers/media/dvb/dibusb/Kconfig b/drivers/media/dvb/dibusb/Kconfig deleted file mode 100644 index 74dfc73ae5b0..000000000000 --- a/drivers/media/dvb/dibusb/Kconfig +++ /dev/null @@ -1,62 +0,0 @@ -config DVB_DIBUSB - tristate "DiBcom USB DVB-T devices (see help for a complete device list)" - depends on DVB_CORE && USB - select FW_LOADER - select DVB_DIB3000MB - select DVB_DIB3000MC - select DVB_MT352 - help - Support for USB 1.1 and 2.0 DVB-T devices based on reference designs made by - DiBcom (http://www.dibcom.fr) and C&E. - - Devices supported by this driver: - - TwinhanDTV USB-Ter (VP7041) - TwinhanDTV Magic Box (VP7041e) - KWorld/JetWay/ADSTech V-Stream XPERT DTV - DVB-T USB1.1 and USB2.0 - Hama DVB-T USB-Box - DiBcom reference devices (non-public) - Ultima Electronic/Artec T1 USB TVBOX - Compro Videomate DVB-U2000 - DVB-T USB - Grandtec DVB-T USB - Avermedia AverTV DVBT USB - Artec T1 USB1.1 and USB2.0 boxes - Yakumo/Typhoon DVB-T USB2.0 - Hanftek UMT-010 USB2.0 - Hauppauge WinTV NOVA-T USB2 - - The VP7041 seems to be identical to "CTS Portable" (Chinese - Television System). - - These devices can be understood as budget ones, they "only" deliver - (a part of) the MPEG2 transport stream. - - A firmware is needed to get the device working. See Documentation/dvb/README.dibusb - details. - - Say Y if you own such a device and want to use it. You should build it as - a module. - -config DVB_DIBUSB_MISDESIGNED_DEVICES - bool "Enable support for some misdesigned (see help) devices, which identify with wrong IDs" - depends on DVB_DIBUSB - help - Somehow Artec/Ultima Electronic forgot to program the eeprom of some of their - USB1.1/USB2.0 devices. - So comes that they identify with the default Vendor and Product ID of the Cypress - CY7C64613 (AN2235) or Cypress FX2. - - Affected device IDs: - 0x0574:0x2235 (Artec T1 USB1.1, cold) - 0x04b4:0x8613 (Artec T1 USB2.0, cold) - 0x0574:0x1002 (Artec T1 USB2.0, warm) - 0x0574:0x2131 (aged DiBcom USB1.1 test device) - - Say Y if your device has one of the mentioned IDs. - -config DVB_DIBCOM_DEBUG - bool "Enable extended debug support for DiBcom USB device" - depends on DVB_DIBUSB - help - Say Y if you want to enable debuging. See modinfo dvb-dibusb for - debug levels. diff --git a/drivers/media/dvb/dibusb/Makefile b/drivers/media/dvb/dibusb/Makefile deleted file mode 100644 index e941c508624e..000000000000 --- a/drivers/media/dvb/dibusb/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -dvb-dibusb-objs = dvb-dibusb-core.o \ - dvb-dibusb-dvb.o \ - dvb-dibusb-fe-i2c.o \ - dvb-dibusb-firmware.o \ - dvb-dibusb-remote.o \ - dvb-dibusb-usb.o \ - dvb-fe-dtt200u.o - -obj-$(CONFIG_DVB_DIBUSB) += dvb-dibusb.o - -EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-core.c b/drivers/media/dvb/dibusb/dvb-dibusb-core.c deleted file mode 100644 index 26235f9247e4..000000000000 --- a/drivers/media/dvb/dibusb/dvb-dibusb-core.c +++ /dev/null @@ -1,558 +0,0 @@ -/* - * Driver for mobile USB Budget DVB-T devices based on reference - * design made by DiBcom (http://www.dibcom.fr/) - * - * dvb-dibusb-core.c - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * based on GPL code from DiBcom, which has - * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr) - * - * Remote control code added by David Matthews (dm@prolingua.co.uk) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation, version 2. - * - * Acknowledgements - * - * Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver - * sources, on which this driver (and the dib3000mb/mc/p frontends) are based. - * - * see Documentation/dvb/README.dibusb for more information - */ -#include "dvb-dibusb.h" - -#include <linux/moduleparam.h> - -/* debug */ -int dvb_dibusb_debug; -module_param_named(debug, dvb_dibusb_debug, int, 0644); - -#ifdef CONFIG_DVB_DIBCOM_DEBUG -#define DBSTATUS "" -#else -#define DBSTATUS " (debugging is not enabled)" -#endif -MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=alotmore,8=ts,16=err,32=rc (|-able))." DBSTATUS); -#undef DBSTATUS - -static int pid_parse; -module_param(pid_parse, int, 0644); -MODULE_PARM_DESC(pid_parse, "enable pid parsing (filtering) when running at USB2.0"); - -static int rc_query_interval = 100; -module_param(rc_query_interval, int, 0644); -MODULE_PARM_DESC(rc_query_interval, "interval in msecs for remote control query (default: 100; min: 40)"); - -static int rc_key_repeat_count = 2; -module_param(rc_key_repeat_count, int, 0644); -MODULE_PARM_DESC(rc_key_repeat_count, "how many key repeats will be dropped before passing the key event again (default: 2)"); - -/* Vendor IDs */ -#define USB_VID_ADSTECH 0x06e1 -#define USB_VID_ANCHOR 0x0547 -#define USB_VID_AVERMEDIA 0x14aa -#define USB_VID_COMPRO 0x185b -#define USB_VID_COMPRO_UNK 0x145f -#define USB_VID_CYPRESS 0x04b4 -#define USB_VID_DIBCOM 0x10b8 -#define USB_VID_EMPIA 0xeb1a -#define USB_VID_GRANDTEC 0x5032 -#define USB_VID_HANFTEK 0x15f4 -#define USB_VID_HAUPPAUGE 0x2040 -#define USB_VID_HYPER_PALTEK 0x1025 -#define USB_VID_IMC_NETWORKS 0x13d3 -#define USB_VID_TWINHAN 0x1822 -#define USB_VID_ULTIMA_ELECTRONIC 0x05d8 - -/* Product IDs */ -#define USB_PID_ADSTECH_USB2_COLD 0xa333 -#define USB_PID_ADSTECH_USB2_WARM 0xa334 -#define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 -#define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 -#define USB_PID_COMPRO_DVBU2000_COLD 0xd000 -#define USB_PID_COMPRO_DVBU2000_WARM 0xd001 -#define USB_PID_COMPRO_DVBU2000_UNK_COLD 0x010c -#define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d -#define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8 -#define USB_PID_DIBCOM_MOD3000_WARM 0x0bb9 -#define USB_PID_DIBCOM_MOD3001_COLD 0x0bc6 -#define USB_PID_DIBCOM_MOD3001_WARM 0x0bc7 -#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131 -#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 -#define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1 -#define USB_PID_KWORLD_VSTREAM_COLD 0x17de -#define USB_PID_KWORLD_VSTREAM_WARM 0x17df -#define USB_PID_TWINHAN_VP7041_COLD 0x3201 -#define USB_PID_TWINHAN_VP7041_WARM 0x3202 -#define USB_PID_ULTIMA_TVBOX_COLD 0x8105 -#define USB_PID_ULTIMA_TVBOX_WARM 0x8106 -#define USB_PID_ULTIMA_TVBOX_AN2235_COLD 0x8107 -#define USB_PID_ULTIMA_TVBOX_AN2235_WARM 0x8108 -#define USB_PID_ULTIMA_TVBOX_ANCHOR_COLD 0x2235 -#define USB_PID_ULTIMA_TVBOX_USB2_COLD 0x8109 -#define USB_PID_ULTIMA_TVBOX_USB2_FX_COLD 0x8613 -#define USB_PID_ULTIMA_TVBOX_USB2_FX_WARM 0x1002 -#define USB_PID_UNK_HYPER_PALTEK_COLD 0x005e -#define USB_PID_UNK_HYPER_PALTEK_WARM 0x005f -#define USB_PID_HANFTEK_UMT_010_COLD 0x0001 -#define USB_PID_HANFTEK_UMT_010_WARM 0x0015 -#define USB_PID_YAKUMO_DTT200U_COLD 0x0201 -#define USB_PID_YAKUMO_DTT200U_WARM 0x0301 -#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300 -#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301 - -/* USB Driver stuff - * table of devices that this driver is working with - * - * ATTENTION: Never ever change the order of this table, the particular - * devices depend on this order - * - * Each entry is used as a reference in the device_struct. Currently this is - * the only non-redundant way of assigning USB ids to actual devices I'm aware - * of, because there is only one place in the code where the assignment of - * vendor and product id is done, here. - */ -static struct usb_device_id dib_table [] = { -/* 00 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB_COLD)}, -/* 01 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB_WARM)}, -/* 02 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_YAKUMO_DTT200U_COLD) }, -/* 03 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_YAKUMO_DTT200U_WARM) }, - -/* 04 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_COLD) }, -/* 05 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_WARM) }, -/* 06 */ { USB_DEVICE(USB_VID_COMPRO_UNK, USB_PID_COMPRO_DVBU2000_UNK_COLD) }, -/* 07 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_COLD) }, -/* 08 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_WARM) }, -/* 09 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_COLD) }, -/* 10 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_WARM) }, -/* 11 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_COLD) }, -/* 12 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_WARM) }, -/* 13 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_COLD) }, -/* 14 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_WARM) }, -/* 15 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_COLD) }, -/* 16 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_WARM) }, -/* 17 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_COLD) }, -/* 18 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_WARM) }, -/* 19 */ { USB_DEVICE(USB_VID_IMC_NETWORKS, USB_PID_TWINHAN_VP7041_COLD) }, -/* 20 */ { USB_DEVICE(USB_VID_IMC_NETWORKS, USB_PID_TWINHAN_VP7041_WARM) }, -/* 21 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_COLD) }, -/* 22 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_WARM) }, -/* 23 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_COLD) }, -/* 24 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_WARM) }, -/* 25 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_COLD) }, -/* 26 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_WARM) }, -/* 27 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) }, - -/* 28 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_COLD) }, -/* 29 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_WARM) }, - -/* 30 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_COLD) }, -/* 31 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_WARM) }, -/* 32 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_COLD) }, -/* 33 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_WARM) }, -/* - * activate the following define when you have one of the devices and want to - * build it from build-2.6 in dvb-kernel - */ -// #define CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES -#ifdef CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES -/* 34 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) }, -/* 35 */ { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ULTIMA_TVBOX_USB2_FX_COLD) }, -/* 36 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_USB2_FX_WARM) }, -/* 37 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_DIBCOM_ANCHOR_2135_COLD) }, -#endif - { } /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE (usb, dib_table); - -static struct dibusb_usb_controller dibusb_usb_ctrl[] = { - { .name = "Cypress AN2135", .cpu_cs_register = 0x7f92 }, - { .name = "Cypress AN2235", .cpu_cs_register = 0x7f92 }, - { .name = "Cypress FX2", .cpu_cs_register = 0xe600 }, -}; - -struct dibusb_tuner dibusb_tuner[] = { - { DIBUSB_TUNER_CABLE_THOMSON, - 0x61 - }, - { DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5, - 0x60 - }, - { DIBUSB_TUNER_CABLE_LG_TDTP_E102P, - 0x61 - }, - { DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5, - 0x60 - }, -}; - -static struct dibusb_demod dibusb_demod[] = { - { DIBUSB_DIB3000MB, - 16, - { 0x8, 0 }, - }, - { DIBUSB_DIB3000MC, - 32, - { 0x9, 0xa, 0xb, 0xc }, - }, - { DIBUSB_MT352, - 254, - { 0xf, 0 }, - }, - { DTT200U_FE, - 8, - { 0xff,0 }, /* there is no i2c bus in this device */ - } -}; - -static struct dibusb_device_class dibusb_device_classes[] = { - { .id = DIBUSB1_1, .usb_ctrl = &dibusb_usb_ctrl[0], - .firmware = "dvb-dibusb-5.0.0.11.fw", - .pipe_cmd = 0x01, .pipe_data = 0x02, - .urb_count = 7, .urb_buffer_size = 4096, - DIBUSB_RC_NEC_PROTOCOL, - &dibusb_demod[DIBUSB_DIB3000MB], - &dibusb_tuner[DIBUSB_TUNER_CABLE_THOMSON], - }, - { DIBUSB1_1_AN2235, &dibusb_usb_ctrl[1], - "dvb-dibusb-an2235-1.fw", - 0x01, 0x02, - 7, 4096, - DIBUSB_RC_NEC_PROTOCOL, - &dibusb_demod[DIBUSB_DIB3000MB], - &dibusb_tuner[DIBUSB_TUNER_CABLE_THOMSON], - }, - { DIBUSB2_0,&dibusb_usb_ctrl[2], - "dvb-dibusb-6.0.0.5.fw", - 0x01, 0x06, - 7, 4096, - DIBUSB_RC_NEC_PROTOCOL, - &dibusb_demod[DIBUSB_DIB3000MC], - &dibusb_tuner[DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5], - }, - { UMT2_0, &dibusb_usb_ctrl[2], - "dvb-dibusb-umt-2.fw", - 0x01, 0x06, - 20, 512, - DIBUSB_RC_NO, - &dibusb_demod[DIBUSB_MT352], - &dibusb_tuner[DIBUSB_TUNER_CABLE_LG_TDTP_E102P], - }, - { DIBUSB2_0B,&dibusb_usb_ctrl[2], - "dvb-dibusb-adstech-usb2-1.fw", - 0x01, 0x06, - 7, 4096, - DIBUSB_RC_NEC_PROTOCOL, - &dibusb_demod[DIBUSB_DIB3000MB], - &dibusb_tuner[DIBUSB_TUNER_CABLE_THOMSON], - }, - { NOVAT_USB2,&dibusb_usb_ctrl[2], - "dvb-dibusb-nova-t-1.fw", - 0x01, 0x06, - 7, 4096, - DIBUSB_RC_HAUPPAUGE_PROTO, - &dibusb_demod[DIBUSB_DIB3000MC], - &dibusb_tuner[DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5], - }, - { DTT200U,&dibusb_usb_ctrl[2], - "dvb-dtt200u-1.fw", - 0x01, 0x02, - 7, 4096, - DIBUSB_RC_NO, - &dibusb_demod[DTT200U_FE], - NULL, /* no explicit tuner/pll-programming necessary (it has the ENV57H1XD5) */ - }, -}; - -static struct dibusb_usb_device dibusb_devices[] = { - { "TwinhanDTV USB1.1 / Magic Box / HAMA USB1.1 DVB-T device", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[19], &dib_table[21], NULL}, - { &dib_table[20], &dib_table[22], NULL}, - }, - { "KWorld V-Stream XPERT DTV - DVB-T USB1.1", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[11], NULL }, - { &dib_table[12], NULL }, - }, - { "Grandtec USB1.1 DVB-T", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[13], &dib_table[15], NULL }, - { &dib_table[14], &dib_table[16], NULL }, - }, - { "DiBcom USB1.1 DVB-T reference design (MOD3000)", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[7], NULL }, - { &dib_table[8], NULL }, - }, - { "Artec T1 USB1.1 TVBOX with AN2135", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[23], NULL }, - { &dib_table[24], NULL }, - }, - { "Artec T1 USB1.1 TVBOX with AN2235", - &dibusb_device_classes[DIBUSB1_1_AN2235], - { &dib_table[25], NULL }, - { &dib_table[26], NULL }, - }, - { "Avermedia AverTV DVBT USB1.1", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[0], NULL }, - { &dib_table[1], NULL }, - }, - { "Compro Videomate DVB-U2000 - DVB-T USB1.1 (please confirm to linux-dvb)", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[4], &dib_table[6], NULL}, - { &dib_table[5], NULL }, - }, - { "Unkown USB1.1 DVB-T device ???? please report the name to the author", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[17], NULL }, - { &dib_table[18], NULL }, - }, - { "DiBcom USB2.0 DVB-T reference design (MOD3000P)", - &dibusb_device_classes[DIBUSB2_0], - { &dib_table[9], NULL }, - { &dib_table[10], NULL }, - }, - { "Artec T1 USB2.0 TVBOX (please report the warm ID)", - &dibusb_device_classes[DIBUSB2_0], - { &dib_table[27], NULL }, - { NULL }, - }, - { "Hauppauge WinTV NOVA-T USB2", - &dibusb_device_classes[NOVAT_USB2], - { &dib_table[30], NULL }, - { &dib_table[31], NULL }, - }, - { "DTT200U (Yakumo/Hama/Typhoon) DVB-T USB2.0", - &dibusb_device_classes[DTT200U], - { &dib_table[2], NULL }, - { &dib_table[3], NULL }, - }, - { "Hanftek UMT-010 DVB-T USB2.0", - &dibusb_device_classes[UMT2_0], - { &dib_table[28], NULL }, - { &dib_table[29], NULL }, - }, - { "KWorld/ADSTech Instant DVB-T USB 2.0", - &dibusb_device_classes[DIBUSB2_0B], - { &dib_table[32], NULL }, - { &dib_table[33], NULL }, /* device ID with default DIBUSB2_0-firmware */ - }, -#ifdef CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES - { "Artec T1 USB1.1 TVBOX with AN2235 (misdesigned)", - &dibusb_device_classes[DIBUSB1_1_AN2235], - { &dib_table[34], NULL }, - { NULL }, - }, - { "Artec T1 USB2.0 TVBOX with FX2 IDs (misdesigned, please report the warm ID)", - &dibusb_device_classes[DTT200U], - { &dib_table[35], NULL }, - { &dib_table[36], NULL }, /* undefined, it could be that the device will get another USB ID in warm state */ - }, - { "DiBcom USB1.1 DVB-T reference design (MOD3000) with AN2135 default IDs", - &dibusb_device_classes[DIBUSB1_1], - { &dib_table[37], NULL }, - { NULL }, - }, -#endif -}; - -static int dibusb_exit(struct usb_dibusb *dib) -{ - deb_info("init_state before exiting everything: %x\n",dib->init_state); - dibusb_remote_exit(dib); - dibusb_fe_exit(dib); - dibusb_i2c_exit(dib); - dibusb_dvb_exit(dib); - dibusb_urb_exit(dib); - deb_info("init_state should be zero now: %x\n",dib->init_state); - dib->init_state = DIBUSB_STATE_INIT; - kfree(dib); - return 0; -} - -static int dibusb_init(struct usb_dibusb *dib) -{ - int ret = 0; - sema_init(&dib->usb_sem, 1); - sema_init(&dib->i2c_sem, 1); - - dib->init_state = DIBUSB_STATE_INIT; - - if ((ret = dibusb_urb_init(dib)) || - (ret = dibusb_dvb_init(dib)) || - (ret = dibusb_i2c_init(dib))) { - dibusb_exit(dib); - return ret; - } - - if ((ret = dibusb_fe_init(dib))) - err("could not initialize a frontend."); - - if ((ret = dibusb_remote_init(dib))) - err("could not initialize remote control."); - - return 0; -} - -static struct dibusb_usb_device * dibusb_device_class_quirk(struct usb_device *udev, struct dibusb_usb_device *dev) -{ - int i; - - /* Quirk for the Kworld/ADSTech Instant USB2.0 device. It has the same USB - * IDs like the USB1.1 KWorld after loading the firmware. Which is a bad - * idea and make this quirk necessary. - */ - if (dev->dev_cl->id == DIBUSB1_1 && udev->speed == USB_SPEED_HIGH) { - info("this seems to be the Kworld/ADSTech Instant USB2.0 device or equal."); - for (i = 0; i < sizeof(dibusb_devices)/sizeof(struct dibusb_usb_device); i++) { - if (dibusb_devices[i].dev_cl->id == DIBUSB2_0B) { - dev = &dibusb_devices[i]; - break; - } - } - } - - return dev; -} - -static struct dibusb_usb_device * dibusb_find_device (struct usb_device *udev,int *cold) -{ - int i,j; - struct dibusb_usb_device *dev = NULL; - *cold = -1; - - for (i = 0; i < sizeof(dibusb_devices)/sizeof(struct dibusb_usb_device); i++) { - for (j = 0; j < DIBUSB_ID_MAX_NUM && dibusb_devices[i].cold_ids[j] != NULL; j++) { - deb_info("check for cold %x %x\n",dibusb_devices[i].cold_ids[j]->idVendor, dibusb_devices[i].cold_ids[j]->idProduct); - if (dibusb_devices[i].cold_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && - dibusb_devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { - *cold = 1; - dev = &dibusb_devices[i]; - break; - } - } - - if (dev != NULL) - break; - - for (j = 0; j < DIBUSB_ID_MAX_NUM && dibusb_devices[i].warm_ids[j] != NULL; j++) { - deb_info("check for warm %x %x\n",dibusb_devices[i].warm_ids[j]->idVendor, dibusb_devices[i].warm_ids[j]->idProduct); - if (dibusb_devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && - dibusb_devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { - *cold = 0; - dev = &dibusb_devices[i]; - break; - } - } - } - - if (dev != NULL) - dev = dibusb_device_class_quirk(udev,dev); - - return dev; -} - -/* - * USB - */ -static int dibusb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(intf); - struct usb_dibusb *dib = NULL; - struct dibusb_usb_device *dibdev = NULL; - - int ret = -ENOMEM,cold=0; - - if ((dibdev = dibusb_find_device(udev,&cold)) == NULL) { - err("something went very wrong, " - "unknown product ID: %.4x",le16_to_cpu(udev->descriptor.idProduct)); - return -ENODEV; - } - - if (cold == 1) { - info("found a '%s' in cold state, will try to load a firmware",dibdev->name); - ret = dibusb_loadfirmware(udev,dibdev); - } else { - info("found a '%s' in warm state.",dibdev->name); - dib = kmalloc(sizeof(struct usb_dibusb),GFP_KERNEL); - if (dib == NULL) { - err("no memory"); - return ret; - } - memset(dib,0,sizeof(struct usb_dibusb)); - - dib->udev = udev; - dib->dibdev = dibdev; - - /* store parameters to structures */ - dib->rc_query_interval = rc_query_interval; - dib->pid_parse = pid_parse; - dib->rc_key_repeat_count = rc_key_repeat_count; - - usb_set_intfdata(intf, dib); - - ret = dibusb_init(dib); - } - - if (ret == 0) - info("%s successfully initialized and connected.",dibdev->name); - else - info("%s error while loading driver (%d)",dibdev->name,ret); - return ret; -} - -static void dibusb_disconnect(struct usb_interface *intf) -{ - struct usb_dibusb *dib = usb_get_intfdata(intf); - const char *name = DRIVER_DESC; - - usb_set_intfdata(intf,NULL); - if (dib != NULL && dib->dibdev != NULL) { - name = dib->dibdev->name; - dibusb_exit(dib); - } - info("%s successfully deinitialized and disconnected.",name); - -} - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver dibusb_driver = { - .owner = THIS_MODULE, - .name = DRIVER_DESC, - .probe = dibusb_probe, - .disconnect = dibusb_disconnect, - .id_table = dib_table, -}; - -/* module stuff */ -static int __init usb_dibusb_init(void) -{ - int result; - if ((result = usb_register(&dibusb_driver))) { - err("usb_register failed. Error number %d",result); - return result; - } - - return 0; -} - -static void __exit usb_dibusb_exit(void) -{ - /* deregister this driver from the USB subsystem */ - usb_deregister(&dibusb_driver); -} - -module_init (usb_dibusb_init); -module_exit (usb_dibusb_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c b/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c deleted file mode 100644 index 400b439e804e..000000000000 --- a/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c +++ /dev/null @@ -1,185 +0,0 @@ -/* - * dvb-dibusb-dvb.c is part of the driver for mobile USB Budget DVB-T devices - * based on reference design made by DiBcom (http://www.dibcom.fr/) - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * see dvb-dibusb-core.c for more copyright details. - * - * This file contains functions for initializing and handling the - * linux-dvb API. - */ -#include "dvb-dibusb.h" - -#include <linux/usb.h> -#include <linux/version.h> - -static u32 urb_compl_count; - -/* - * MPEG2 TS DVB stuff - */ -void dibusb_urb_complete(struct urb *urb, struct pt_regs *ptregs) -{ - struct usb_dibusb *dib = urb->context; - - deb_ts("urb complete feedcount: %d, status: %d, length: %d\n",dib->feedcount,urb->status, - urb->actual_length); - - urb_compl_count++; - if (urb_compl_count % 1000 == 0) - deb_info("%d urbs completed so far.\n",urb_compl_count); - - switch (urb->status) { - case 0: /* success */ - case -ETIMEDOUT: /* NAK */ - break; - case -ECONNRESET: /* kill */ - case -ENOENT: - case -ESHUTDOWN: - return; - default: /* error */ - deb_ts("urb completition error %d.", urb->status); - break; - } - - if (dib->feedcount > 0 && urb->actual_length > 0) { - if (dib->init_state & DIBUSB_STATE_DVB) - dvb_dmx_swfilter(&dib->demux, (u8*) urb->transfer_buffer,urb->actual_length); - } else - deb_ts("URB dropped because of feedcount.\n"); - - usb_submit_urb(urb,GFP_ATOMIC); -} - -static int dibusb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff) -{ - struct usb_dibusb *dib = dvbdmxfeed->demux->priv; - int newfeedcount; - - if (dib == NULL) - return -ENODEV; - - newfeedcount = dib->feedcount + (onoff ? 1 : -1); - - /* - * stop feed before setting a new pid if there will be no pid anymore - */ - if (newfeedcount == 0) { - deb_ts("stop feeding\n"); - if (dib->xfer_ops.fifo_ctrl != NULL) { - if (dib->xfer_ops.fifo_ctrl(dib->fe,0)) { - err("error while inhibiting fifo."); - return -ENODEV; - } - } - dibusb_streaming(dib,0); - } - - dib->feedcount = newfeedcount; - - /* activate the pid on the device specific pid_filter */ - deb_ts("setting pid: %5d %04x at index %d '%s'\n",dvbdmxfeed->pid,dvbdmxfeed->pid,dvbdmxfeed->index,onoff ? "on" : "off"); - if (dib->pid_parse && dib->xfer_ops.pid_ctrl != NULL) - dib->xfer_ops.pid_ctrl(dib->fe,dvbdmxfeed->index,dvbdmxfeed->pid,onoff); - - /* - * start the feed if this was the first pid to set and there is still a pid - * for reception. - */ - if (dib->feedcount == onoff && dib->feedcount > 0) { - - deb_ts("controlling pid parser\n"); - if (dib->xfer_ops.pid_parse != NULL) { - if (dib->xfer_ops.pid_parse(dib->fe,dib->pid_parse) < 0) { - err("could not handle pid_parser"); - } - } - - deb_ts("start feeding\n"); - if (dib->xfer_ops.fifo_ctrl != NULL) { - if (dib->xfer_ops.fifo_ctrl(dib->fe,1)) { - err("error while enabling fifo."); - return -ENODEV; - } - } - dibusb_streaming(dib,1); - } - return 0; -} - -static int dibusb_start_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - deb_ts("start pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid,dvbdmxfeed->type); - return dibusb_ctrl_feed(dvbdmxfeed,1); -} - -static int dibusb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - deb_ts("stop pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid, dvbdmxfeed->type); - return dibusb_ctrl_feed(dvbdmxfeed,0); -} - -int dibusb_dvb_init(struct usb_dibusb *dib) -{ - int ret; - - urb_compl_count = 0; - - if ((ret = dvb_register_adapter(&dib->adapter, DRIVER_DESC, - THIS_MODULE)) < 0) { - deb_info("dvb_register_adapter failed: error %d", ret); - goto err; - } - dib->adapter.priv = dib; - -/* i2c is done in dibusb_i2c_init */ - - dib->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; - - dib->demux.priv = (void *)dib; - /* get pidcount from demod */ - dib->demux.feednum = dib->demux.filternum = 255; - dib->demux.start_feed = dibusb_start_feed; - dib->demux.stop_feed = dibusb_stop_feed; - dib->demux.write_to_decoder = NULL; - if ((ret = dvb_dmx_init(&dib->demux)) < 0) { - err("dvb_dmx_init failed: error %d",ret); - goto err_dmx; - } - - dib->dmxdev.filternum = dib->demux.filternum; - dib->dmxdev.demux = &dib->demux.dmx; - dib->dmxdev.capabilities = 0; - if ((ret = dvb_dmxdev_init(&dib->dmxdev, &dib->adapter)) < 0) { - err("dvb_dmxdev_init failed: error %d",ret); - goto err_dmx_dev; - } - - dvb_net_init(&dib->adapter, &dib->dvb_net, &dib->demux.dmx); - - goto success; -err_dmx_dev: - dvb_dmx_release(&dib->demux); -err_dmx: - dvb_unregister_adapter(&dib->adapter); -err: - return ret; -success: - dib->init_state |= DIBUSB_STATE_DVB; - return 0; -} - -int dibusb_dvb_exit(struct usb_dibusb *dib) -{ - if (dib->init_state & DIBUSB_STATE_DVB) { - dib->init_state &= ~DIBUSB_STATE_DVB; - deb_info("unregistering DVB part\n"); - dvb_net_release(&dib->dvb_net); - dib->demux.dmx.close(&dib->demux.dmx); - dvb_dmxdev_release(&dib->dmxdev); - dvb_dmx_release(&dib->demux); - dvb_unregister_adapter(&dib->adapter); - } - return 0; -} diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c b/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c deleted file mode 100644 index 5a71b88797d9..000000000000 --- a/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c +++ /dev/null @@ -1,582 +0,0 @@ -/* - * dvb-dibusb-fe-i2c.c is part of the driver for mobile USB Budget DVB-T devices - * based on reference design made by DiBcom (http://www.dibcom.fr/) - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * see dvb-dibusb-core.c for more copyright details. - * - * This file contains functions for attaching, initializing of an appropriate - * demodulator/frontend. I2C-stuff is also located here. - * - */ -#include "dvb-dibusb.h" - -#include <linux/usb.h> - -static int dibusb_i2c_msg(struct usb_dibusb *dib, u8 addr, - u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) -{ - u8 sndbuf[wlen+4]; /* lead(1) devaddr,direction(1) addr(2) data(wlen) (len(2) (when reading)) */ - /* write only ? */ - int wo = (rbuf == NULL || rlen == 0), - len = 2 + wlen + (wo ? 0 : 2); - - sndbuf[0] = wo ? DIBUSB_REQ_I2C_WRITE : DIBUSB_REQ_I2C_READ; - sndbuf[1] = (addr << 1) | (wo ? 0 : 1); - - memcpy(&sndbuf[2],wbuf,wlen); - - if (!wo) { - sndbuf[wlen+2] = (rlen >> 8) & 0xff; - sndbuf[wlen+3] = rlen & 0xff; - } - - return dibusb_readwrite_usb(dib,sndbuf,len,rbuf,rlen); -} - -/* - * I2C master xfer function - */ -static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg *msg,int num) -{ - struct usb_dibusb *dib = i2c_get_adapdata(adap); - int i; - - if (down_interruptible(&dib->i2c_sem) < 0) - return -EAGAIN; - - if (num > 2) - warn("more than 2 i2c messages at a time is not handled yet. TODO."); - - for (i = 0; i < num; i++) { - /* write/read request */ - if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { - if (dibusb_i2c_msg(dib, msg[i].addr, msg[i].buf,msg[i].len, - msg[i+1].buf,msg[i+1].len) < 0) - break; - i++; - } else - if (dibusb_i2c_msg(dib, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0) - break; - } - - up(&dib->i2c_sem); - return i; -} - -static u32 dibusb_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm dibusb_algo = { - .name = "DiBcom USB i2c algorithm", - .id = I2C_ALGO_BIT, - .master_xfer = dibusb_i2c_xfer, - .functionality = dibusb_i2c_func, -}; - -static int dibusb_general_demod_init(struct dvb_frontend *fe); -static u8 dibusb_general_pll_addr(struct dvb_frontend *fe); -static int dibusb_general_pll_init(struct dvb_frontend *fe, u8 pll_buf[5]); -static int dibusb_general_pll_set(struct dvb_frontend *fe, - struct dvb_frontend_parameters* params, u8 pll_buf[5]); - -static struct mt352_config mt352_hanftek_umt_010_config = { - .demod_address = 0x1e, - .demod_init = dibusb_general_demod_init, - .pll_set = dibusb_general_pll_set, -}; - -static int dibusb_tuner_quirk(struct usb_dibusb *dib) -{ - switch (dib->dibdev->dev_cl->id) { - case DIBUSB1_1: /* some these device have the ENV77H11D5 and some the THOMSON CABLE */ - case DIBUSB1_1_AN2235: { /* actually its this device, but in warm state they are indistinguishable */ - struct dibusb_tuner *t; - u8 b[2] = { 0,0 } ,b2[1]; - struct i2c_msg msg[2] = { - { .flags = 0, .buf = b, .len = 2 }, - { .flags = I2C_M_RD, .buf = b2, .len = 1}, - }; - - t = &dibusb_tuner[DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5]; - - msg[0].addr = msg[1].addr = t->pll_addr; - - if (dib->xfer_ops.tuner_pass_ctrl != NULL) - dib->xfer_ops.tuner_pass_ctrl(dib->fe,1,t->pll_addr); - dibusb_i2c_xfer(&dib->i2c_adap,msg,2); - if (dib->xfer_ops.tuner_pass_ctrl != NULL) - dib->xfer_ops.tuner_pass_ctrl(dib->fe,0,t->pll_addr); - - if (b2[0] == 0xfe) - info("this device has the Thomson Cable onboard. Which is default."); - else { - dib->tuner = t; - info("this device has the Panasonic ENV77H11D5 onboard."); - } - break; - } - default: - break; - } - return 0; -} - -int dibusb_fe_init(struct usb_dibusb* dib) -{ - struct dib3000_config demod_cfg; - int i; - - if (dib->init_state & DIBUSB_STATE_I2C) { - for (i = 0; i < sizeof(dib->dibdev->dev_cl->demod->i2c_addrs) / sizeof(unsigned char) && - dib->dibdev->dev_cl->demod->i2c_addrs[i] != 0; i++) { - - demod_cfg.demod_address = dib->dibdev->dev_cl->demod->i2c_addrs[i]; - demod_cfg.pll_addr = dibusb_general_pll_addr; - demod_cfg.pll_set = dibusb_general_pll_set; - demod_cfg.pll_init = dibusb_general_pll_init; - - deb_info("demod id: %d %d\n",dib->dibdev->dev_cl->demod->id,DTT200U_FE); - - switch (dib->dibdev->dev_cl->demod->id) { - case DIBUSB_DIB3000MB: - dib->fe = dib3000mb_attach(&demod_cfg,&dib->i2c_adap,&dib->xfer_ops); - break; - case DIBUSB_DIB3000MC: - dib->fe = dib3000mc_attach(&demod_cfg,&dib->i2c_adap,&dib->xfer_ops); - break; - case DIBUSB_MT352: - mt352_hanftek_umt_010_config.demod_address = dib->dibdev->dev_cl->demod->i2c_addrs[i]; - dib->fe = mt352_attach(&mt352_hanftek_umt_010_config, &dib->i2c_adap); - break; - case DTT200U_FE: - dib->fe = dtt200u_fe_attach(dib,&dib->xfer_ops); - break; - } - if (dib->fe != NULL) { - info("found demodulator at i2c address 0x%x",dib->dibdev->dev_cl->demod->i2c_addrs[i]); - break; - } - } - /* if a frontend was found */ - if (dib->fe != NULL) { - if (dib->fe->ops->sleep != NULL) - dib->fe_sleep = dib->fe->ops->sleep; - dib->fe->ops->sleep = dibusb_hw_sleep; - - if (dib->fe->ops->init != NULL ) - dib->fe_init = dib->fe->ops->init; - dib->fe->ops->init = dibusb_hw_wakeup; - - /* setting the default tuner */ - dib->tuner = dib->dibdev->dev_cl->tuner; - - /* check which tuner is mounted on this device, in case this is unsure */ - dibusb_tuner_quirk(dib); - } - } - if (dib->fe == NULL) { - err("A frontend driver was not found for device '%s'.", - dib->dibdev->name); - return -ENODEV; - } else { - if (dvb_register_frontend(&dib->adapter, dib->fe)) { - err("Frontend registration failed."); - if (dib->fe->ops->release) - dib->fe->ops->release(dib->fe); - dib->fe = NULL; - return -ENODEV; - } - } - - return 0; -} - -int dibusb_fe_exit(struct usb_dibusb *dib) -{ - if (dib->fe != NULL) - dvb_unregister_frontend(dib->fe); - return 0; -} - -int dibusb_i2c_init(struct usb_dibusb *dib) -{ - int ret = 0; - - dib->adapter.priv = dib; - - strncpy(dib->i2c_adap.name,dib->dibdev->name,I2C_NAME_SIZE); -#ifdef I2C_ADAP_CLASS_TV_DIGITAL - dib->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL, -#else - dib->i2c_adap.class = I2C_CLASS_TV_DIGITAL, -#endif - dib->i2c_adap.algo = &dibusb_algo; - dib->i2c_adap.algo_data = NULL; - dib->i2c_adap.id = I2C_ALGO_BIT; - - i2c_set_adapdata(&dib->i2c_adap, dib); - - if ((ret = i2c_add_adapter(&dib->i2c_adap)) < 0) - err("could not add i2c adapter"); - - dib->init_state |= DIBUSB_STATE_I2C; - - return ret; -} - -int dibusb_i2c_exit(struct usb_dibusb *dib) -{ - if (dib->init_state & DIBUSB_STATE_I2C) - i2c_del_adapter(&dib->i2c_adap); - dib->init_state &= ~DIBUSB_STATE_I2C; - return 0; -} - - -/* pll stuff, maybe removed soon (thx to Gerd/Andrew in advance) */ -static int thomson_cable_eu_pll_set(struct dvb_frontend_parameters *fep, u8 pllbuf[4]) -{ - u32 tfreq = (fep->frequency + 36125000) / 62500; - int vu,p0,p1,p2; - - if (fep->frequency > 403250000) - vu = 1, p2 = 1, p1 = 0, p0 = 1; - else if (fep->frequency > 115750000) - vu = 0, p2 = 1, p1 = 1, p0 = 0; - else if (fep->frequency > 44250000) - vu = 0, p2 = 0, p1 = 1, p0 = 1; - else - return -EINVAL; - - pllbuf[0] = (tfreq >> 8) & 0x7f; - pllbuf[1] = tfreq & 0xff; - pllbuf[2] = 0x8e; - pllbuf[3] = (vu << 7) | (p2 << 2) | (p1 << 1) | p0; - return 0; -} - -static int panasonic_cofdm_env57h1xd5_pll_set(struct dvb_frontend_parameters *fep, u8 pllbuf[4]) -{ - u32 freq_khz = fep->frequency / 1000; - u32 tfreq = ((freq_khz + 36125)*6 + 500) / 1000; - u8 TA, T210, R210, ctrl1, cp210, p4321; - if (freq_khz > 858000) { - err("frequency cannot be larger than 858 MHz."); - return -EINVAL; - } - - // contol data 1 : 1 | T/A=1 | T2,T1,T0 = 0,0,0 | R2,R1,R0 = 0,1,0 - TA = 1; - T210 = 0; - R210 = 0x2; - ctrl1 = (1 << 7) | (TA << 6) | (T210 << 3) | R210; - -// ******** CHARGE PUMP CONFIG vs RF FREQUENCIES ***************** - if (freq_khz < 470000) - cp210 = 2; // VHF Low and High band ch E12 to E4 to E12 - else if (freq_khz < 526000) - cp210 = 4; // UHF band Ch E21 to E27 - else // if (freq < 862000000) - cp210 = 5; // UHF band ch E28 to E69 - -//********************* BW select ******************************* - if (freq_khz < 153000) - p4321 = 1; // BW selected for VHF low - else if (freq_khz < 470000) - p4321 = 2; // BW selected for VHF high E5 to E12 - else // if (freq < 862000000) - p4321 = 4; // BW selection for UHF E21 to E69 - - pllbuf[0] = (tfreq >> 8) & 0xff; - pllbuf[1] = (tfreq >> 0) & 0xff; - pllbuf[2] = 0xff & ctrl1; - pllbuf[3] = (cp210 << 5) | (p4321); - - return 0; -} - -/* - * 7 6 5 4 3 2 1 0 - * Address Byte 1 1 0 0 0 MA1 MA0 R/~W=0 - * - * Program divider byte 1 0 n14 n13 n12 n11 n10 n9 n8 - * Program divider byte 2 n7 n6 n5 n4 n3 n2 n1 n0 - * - * Control byte 1 1 T/A=1 T2 T1 T0 R2 R1 R0 - * 1 T/A=0 0 0 ATC AL2 AL1 AL0 - * - * Control byte 2 CP2 CP1 CP0 BS5 BS4 BS3 BS2 BS1 - * - * MA0/1 = programmable address bits - * R/~W = read/write bit (0 for writing) - * N14-0 = programmable LO frequency - * - * T/A = test AGC bit (0 = next 6 bits AGC setting, - * 1 = next 6 bits test and reference divider ratio settings) - * T2-0 = test bits - * R2-0 = reference divider ratio and programmable frequency step - * ATC = AGC current setting and time constant - * ATC = 0: AGC current = 220nA, AGC time constant = 2s - * ATC = 1: AGC current = 9uA, AGC time constant = 50ms - * AL2-0 = AGC take-over point bits - * CP2-0 = charge pump current - * BS5-1 = PMOS ports control bits; - * BSn = 0 corresponding port is off, high-impedance state (at power-on) - * BSn = 1 corresponding port is on - */ -static int panasonic_cofdm_env77h11d5_tda6650_init(struct dvb_frontend *fe, u8 pllbuf[4]) -{ - pllbuf[0] = 0x0b; - pllbuf[1] = 0xf5; - pllbuf[2] = 0x85; - pllbuf[3] = 0xab; - return 0; -} - -static int panasonic_cofdm_env77h11d5_tda6650_set (struct dvb_frontend_parameters *fep,u8 pllbuf[4]) -{ - int tuner_frequency = 0; - u8 band, cp, filter; - - // determine charge pump - tuner_frequency = fep->frequency + 36166000; - if (tuner_frequency < 87000000) - return -EINVAL; - else if (tuner_frequency < 130000000) - cp = 3; - else if (tuner_frequency < 160000000) - cp = 5; - else if (tuner_frequency < 200000000) - cp = 6; - else if (tuner_frequency < 290000000) - cp = 3; - else if (tuner_frequency < 420000000) - cp = 5; - else if (tuner_frequency < 480000000) - cp = 6; - else if (tuner_frequency < 620000000) - cp = 3; - else if (tuner_frequency < 830000000) - cp = 5; - else if (tuner_frequency < 895000000) - cp = 7; - else - return -EINVAL; - - // determine band - if (fep->frequency < 49000000) - return -EINVAL; - else if (fep->frequency < 161000000) - band = 1; - else if (fep->frequency < 444000000) - band = 2; - else if (fep->frequency < 861000000) - band = 4; - else - return -EINVAL; - - // setup PLL filter - switch (fep->u.ofdm.bandwidth) { - case BANDWIDTH_6_MHZ: - case BANDWIDTH_7_MHZ: - filter = 0; - break; - case BANDWIDTH_8_MHZ: - filter = 1; - break; - default: - return -EINVAL; - } - - // calculate divisor - // ((36166000+((1000000/6)/2)) + Finput)/(1000000/6) - tuner_frequency = (((fep->frequency / 1000) * 6) + 217496) / 1000; - - // setup tuner buffer - pllbuf[0] = (tuner_frequency >> 8) & 0x7f; - pllbuf[1] = tuner_frequency & 0xff; - pllbuf[2] = 0xca; - pllbuf[3] = (cp << 5) | (filter << 3) | band; - return 0; -} - -/* - * 7 6 5 4 3 2 1 0 - * Address Byte 1 1 0 0 0 MA1 MA0 R/~W=0 - * - * Program divider byte 1 0 n14 n13 n12 n11 n10 n9 n8 - * Program divider byte 2 n7 n6 n5 n4 n3 n2 n1 n0 - * - * Control byte 1 CP T2 T1 T0 RSA RSB OS - * - * Band Switch byte X X X P4 P3 P2 P1 P0 - * - * Auxiliary byte ATC AL2 AL1 AL0 0 0 0 0 - * - * Address: MA1 MA0 Address - * 0 0 c0 - * 0 1 c2 (always valid) - * 1 0 c4 - * 1 1 c6 - */ -static int lg_tdtp_e102p_tua6034(struct dvb_frontend_parameters* fep, u8 pllbuf[4]) -{ - u32 div; - u8 p210, p3; - -#define TUNER_MUL 62500 - - div = (fep->frequency + 36125000 + TUNER_MUL / 2) / TUNER_MUL; -// div = ((fep->frequency/1000 + 36166) * 6) / 1000; - - if (fep->frequency < 174500000) - p210 = 1; // not supported by the tdtp_e102p - else if (fep->frequency < 230000000) // VHF - p210 = 2; - else - p210 = 4; - - if (fep->u.ofdm.bandwidth == BANDWIDTH_7_MHZ) - p3 = 0; - else - p3 = 1; - - pllbuf[0] = (div >> 8) & 0x7f; - pllbuf[1] = div & 0xff; - pllbuf[2] = 0xce; -// pllbuf[2] = 0xcc; - pllbuf[3] = (p3 << 3) | p210; - - return 0; -} - -static int lg_tdtp_e102p_mt352_demod_init(struct dvb_frontend *fe) -{ - static u8 mt352_clock_config[] = { 0x89, 0xb8, 0x2d }; - static u8 mt352_reset[] = { 0x50, 0x80 }; - static u8 mt352_mclk_ratio[] = { 0x8b, 0x00 }; - static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 }; - static u8 mt352_agc_cfg[] = { 0x67, 0x10, 0xa0 }; - - static u8 mt352_sec_agc_cfg1[] = { 0x6a, 0xff }; - static u8 mt352_sec_agc_cfg2[] = { 0x6d, 0xff }; - static u8 mt352_sec_agc_cfg3[] = { 0x70, 0x40 }; - static u8 mt352_sec_agc_cfg4[] = { 0x7b, 0x03 }; - static u8 mt352_sec_agc_cfg5[] = { 0x7d, 0x0f }; - - static u8 mt352_acq_ctl[] = { 0x53, 0x50 }; - static u8 mt352_input_freq_1[] = { 0x56, 0x31, 0x06 }; - - mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); - udelay(2000); - mt352_write(fe, mt352_reset, sizeof(mt352_reset)); - mt352_write(fe, mt352_mclk_ratio, sizeof(mt352_mclk_ratio)); - - mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); - mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); - - mt352_write(fe, mt352_sec_agc_cfg1, sizeof(mt352_sec_agc_cfg1)); - mt352_write(fe, mt352_sec_agc_cfg2, sizeof(mt352_sec_agc_cfg2)); - mt352_write(fe, mt352_sec_agc_cfg3, sizeof(mt352_sec_agc_cfg3)); - mt352_write(fe, mt352_sec_agc_cfg4, sizeof(mt352_sec_agc_cfg4)); - mt352_write(fe, mt352_sec_agc_cfg5, sizeof(mt352_sec_agc_cfg5)); - - mt352_write(fe, mt352_acq_ctl, sizeof(mt352_acq_ctl)); - mt352_write(fe, mt352_input_freq_1, sizeof(mt352_input_freq_1)); - - return 0; -} - -static int dibusb_general_demod_init(struct dvb_frontend *fe) -{ - struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv; - switch (dib->dibdev->dev_cl->id) { - case UMT2_0: - return lg_tdtp_e102p_mt352_demod_init(fe); - default: /* other device classes do not have device specific demod inits */ - break; - } - return 0; -} - -static u8 dibusb_general_pll_addr(struct dvb_frontend *fe) -{ - struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv; - return dib->tuner->pll_addr; -} - -static int dibusb_pll_i2c_helper(struct usb_dibusb *dib, u8 pll_buf[5], u8 buf[4]) -{ - if (pll_buf == NULL) { - struct i2c_msg msg = { - .addr = dib->tuner->pll_addr, - .flags = 0, - .buf = buf, - .len = sizeof(buf) - }; - if (i2c_transfer (&dib->i2c_adap, &msg, 1) != 1) - return -EIO; - msleep(1); - } else { - pll_buf[0] = dib->tuner->pll_addr << 1; - memcpy(&pll_buf[1],buf,4); - } - - return 0; -} - -static int dibusb_general_pll_init(struct dvb_frontend *fe, - u8 pll_buf[5]) -{ - struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv; - u8 buf[4]; - int ret=0; - switch (dib->tuner->id) { - case DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5: - ret = panasonic_cofdm_env77h11d5_tda6650_init(fe,buf); - break; - default: - break; - } - - if (ret) - return ret; - - return dibusb_pll_i2c_helper(dib,pll_buf,buf); -} - -static int dibusb_general_pll_set(struct dvb_frontend *fe, - struct dvb_frontend_parameters *fep, u8 pll_buf[5]) -{ - struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv; - u8 buf[4]; - int ret=0; - - switch (dib->tuner->id) { - case DIBUSB_TUNER_CABLE_THOMSON: - ret = thomson_cable_eu_pll_set(fep, buf); - break; - case DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5: - ret = panasonic_cofdm_env57h1xd5_pll_set(fep, buf); - break; - case DIBUSB_TUNER_CABLE_LG_TDTP_E102P: - ret = lg_tdtp_e102p_tua6034(fep, buf); - break; - case DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5: - ret = panasonic_cofdm_env77h11d5_tda6650_set(fep,buf); - break; - default: - warn("no pll programming routine found for tuner %d.\n",dib->tuner->id); - ret = -ENODEV; - break; - } - - if (ret) - return ret; - - return dibusb_pll_i2c_helper(dib,pll_buf,buf); -} diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-firmware.c b/drivers/media/dvb/dibusb/dvb-dibusb-firmware.c deleted file mode 100644 index 504ba47afdf3..000000000000 --- a/drivers/media/dvb/dibusb/dvb-dibusb-firmware.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * dvb-dibusb-firmware.c is part of the driver for mobile USB Budget DVB-T devices - * based on reference design made by DiBcom (http://www.dibcom.fr/) - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * see dvb-dibusb-core.c for more copyright details. - * - * This file contains functions for downloading the firmware to the device. - */ -#include "dvb-dibusb.h" - -#include <linux/firmware.h> -#include <linux/usb.h> - -/* - * load a firmware packet to the device - */ -static int dibusb_writemem(struct usb_device *udev,u16 addr,u8 *data, u8 len) -{ - return usb_control_msg(udev, usb_sndctrlpipe(udev,0), - 0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5000); -} - -int dibusb_loadfirmware(struct usb_device *udev, struct dibusb_usb_device *dibdev) -{ - const struct firmware *fw = NULL; - u16 addr; - u8 *b,*p; - int ret = 0,i; - - if ((ret = request_firmware(&fw, dibdev->dev_cl->firmware, &udev->dev)) != 0) { - err("did not find the firmware file. (%s) " - "Please see linux/Documentation/dvb/ for more details on firmware-problems.", - dibdev->dev_cl->firmware); - return ret; - } - - info("downloading firmware from file '%s'.",dibdev->dev_cl->firmware); - - p = kmalloc(fw->size,GFP_KERNEL); - if (p != NULL) { - u8 reset; - /* - * you cannot use the fw->data as buffer for - * usb_control_msg, a new buffer has to be - * created - */ - memcpy(p,fw->data,fw->size); - - /* stop the CPU */ - reset = 1; - if ((ret = dibusb_writemem(udev,dibdev->dev_cl->usb_ctrl->cpu_cs_register,&reset,1)) != 1) - err("could not stop the USB controller CPU."); - for(i = 0; p[i+3] == 0 && i < fw->size; ) { - b = (u8 *) &p[i]; - addr = *((u16 *) &b[1]); - - ret = dibusb_writemem(udev,addr,&b[4],b[0]); - - if (ret != b[0]) { - err("error while transferring firmware " - "(transferred size: %d, block size: %d)", - ret,b[0]); - ret = -EINVAL; - break; - } - i += 5 + b[0]; - } - /* length in ret */ - if (ret > 0) - ret = 0; - /* restart the CPU */ - reset = 0; - if (ret || dibusb_writemem(udev,dibdev->dev_cl->usb_ctrl->cpu_cs_register,&reset,1) != 1) { - err("could not restart the USB controller CPU."); - ret = -EINVAL; - } - - kfree(p); - } else { - ret = -ENOMEM; - } - release_firmware(fw); - - return ret; -} diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-remote.c b/drivers/media/dvb/dibusb/dvb-dibusb-remote.c deleted file mode 100644 index 9dc8b15517b7..000000000000 --- a/drivers/media/dvb/dibusb/dvb-dibusb-remote.c +++ /dev/null @@ -1,316 +0,0 @@ -/* - * dvb-dibusb-remote.c is part of the driver for mobile USB Budget DVB-T devices - * based on reference design made by DiBcom (http://www.dibcom.fr/) - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * see dvb-dibusb-core.c for more copyright details. - * - * This file contains functions for handling the event device on the software - * side and the remote control on the hardware side. - */ -#include "dvb-dibusb.h" - -/* Table to map raw key codes to key events. This should not be hard-wired - into the kernel. */ -static const struct { u8 c0, c1, c2; uint32_t key; } nec_rc_keys [] = -{ - /* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */ - { 0x00, 0xff, 0x16, KEY_POWER }, - { 0x00, 0xff, 0x10, KEY_MUTE }, - { 0x00, 0xff, 0x03, KEY_1 }, - { 0x00, 0xff, 0x01, KEY_2 }, - { 0x00, 0xff, 0x06, KEY_3 }, - { 0x00, 0xff, 0x09, KEY_4 }, - { 0x00, 0xff, 0x1d, KEY_5 }, - { 0x00, 0xff, 0x1f, KEY_6 }, - { 0x00, 0xff, 0x0d, KEY_7 }, - { 0x00, 0xff, 0x19, KEY_8 }, - { 0x00, 0xff, 0x1b, KEY_9 }, - { 0x00, 0xff, 0x15, KEY_0 }, - { 0x00, 0xff, 0x05, KEY_CHANNELUP }, - { 0x00, 0xff, 0x02, KEY_CHANNELDOWN }, - { 0x00, 0xff, 0x1e, KEY_VOLUMEUP }, - { 0x00, 0xff, 0x0a, KEY_VOLUMEDOWN }, - { 0x00, 0xff, 0x11, KEY_RECORD }, - { 0x00, 0xff, 0x17, KEY_FAVORITES }, /* Heart symbol - Channel list. */ - { 0x00, 0xff, 0x14, KEY_PLAY }, - { 0x00, 0xff, 0x1a, KEY_STOP }, - { 0x00, 0xff, 0x40, KEY_REWIND }, - { 0x00, 0xff, 0x12, KEY_FASTFORWARD }, - { 0x00, 0xff, 0x0e, KEY_PREVIOUS }, /* Recall - Previous channel. */ - { 0x00, 0xff, 0x4c, KEY_PAUSE }, - { 0x00, 0xff, 0x4d, KEY_SCREEN }, /* Full screen mode. */ - { 0x00, 0xff, 0x54, KEY_AUDIO }, /* MTS - Switch to secondary audio. */ - /* additional keys TwinHan VisionPlus, the Artec seemingly not have */ - { 0x00, 0xff, 0x0c, KEY_CANCEL }, /* Cancel */ - { 0x00, 0xff, 0x1c, KEY_EPG }, /* EPG */ - { 0x00, 0xff, 0x00, KEY_TAB }, /* Tab */ - { 0x00, 0xff, 0x48, KEY_INFO }, /* Preview */ - { 0x00, 0xff, 0x04, KEY_LIST }, /* RecordList */ - { 0x00, 0xff, 0x0f, KEY_TEXT }, /* Teletext */ - /* Key codes for the KWorld/ADSTech/JetWay remote. */ - { 0x86, 0x6b, 0x12, KEY_POWER }, - { 0x86, 0x6b, 0x0f, KEY_SELECT }, /* source */ - { 0x86, 0x6b, 0x0c, KEY_UNKNOWN }, /* scan */ - { 0x86, 0x6b, 0x0b, KEY_EPG }, - { 0x86, 0x6b, 0x10, KEY_MUTE }, - { 0x86, 0x6b, 0x01, KEY_1 }, - { 0x86, 0x6b, 0x02, KEY_2 }, - { 0x86, 0x6b, 0x03, KEY_3 }, - { 0x86, 0x6b, 0x04, KEY_4 }, - { 0x86, 0x6b, 0x05, KEY_5 }, - { 0x86, 0x6b, 0x06, KEY_6 }, - { 0x86, 0x6b, 0x07, KEY_7 }, - { 0x86, 0x6b, 0x08, KEY_8 }, - { 0x86, 0x6b, 0x09, KEY_9 }, - { 0x86, 0x6b, 0x0a, KEY_0 }, - { 0x86, 0x6b, 0x18, KEY_ZOOM }, - { 0x86, 0x6b, 0x1c, KEY_UNKNOWN }, /* preview */ - { 0x86, 0x6b, 0x13, KEY_UNKNOWN }, /* snap */ - { 0x86, 0x6b, 0x00, KEY_UNDO }, - { 0x86, 0x6b, 0x1d, KEY_RECORD }, - { 0x86, 0x6b, 0x0d, KEY_STOP }, - { 0x86, 0x6b, 0x0e, KEY_PAUSE }, - { 0x86, 0x6b, 0x16, KEY_PLAY }, - { 0x86, 0x6b, 0x11, KEY_BACK }, - { 0x86, 0x6b, 0x19, KEY_FORWARD }, - { 0x86, 0x6b, 0x14, KEY_UNKNOWN }, /* pip */ - { 0x86, 0x6b, 0x15, KEY_ESC }, - { 0x86, 0x6b, 0x1a, KEY_UP }, - { 0x86, 0x6b, 0x1e, KEY_DOWN }, - { 0x86, 0x6b, 0x1f, KEY_LEFT }, - { 0x86, 0x6b, 0x1b, KEY_RIGHT }, -}; - -/* Hauppauge NOVA-T USB2 keys */ -static const struct { u16 raw; uint32_t key; } haupp_rc_keys [] = { - { 0xddf, KEY_GOTO }, - { 0xdef, KEY_POWER }, - { 0xce7, KEY_TV }, - { 0xcc7, KEY_VIDEO }, - { 0xccf, KEY_AUDIO }, - { 0xcd7, KEY_MEDIA }, - { 0xcdf, KEY_EPG }, - { 0xca7, KEY_UP }, - { 0xc67, KEY_RADIO }, - { 0xcb7, KEY_LEFT }, - { 0xd2f, KEY_OK }, - { 0xcbf, KEY_RIGHT }, - { 0xcff, KEY_BACK }, - { 0xcaf, KEY_DOWN }, - { 0xc6f, KEY_MENU }, - { 0xc87, KEY_VOLUMEUP }, - { 0xc8f, KEY_VOLUMEDOWN }, - { 0xc97, KEY_CHANNEL }, - { 0xc7f, KEY_MUTE }, - { 0xd07, KEY_CHANNELUP }, - { 0xd0f, KEY_CHANNELDOWN }, - { 0xdbf, KEY_RECORD }, - { 0xdb7, KEY_STOP }, - { 0xd97, KEY_REWIND }, - { 0xdaf, KEY_PLAY }, - { 0xda7, KEY_FASTFORWARD }, - { 0xd27, KEY_LAST }, /* Skip backwards */ - { 0xd87, KEY_PAUSE }, - { 0xcf7, KEY_NEXT }, - { 0xc07, KEY_0 }, - { 0xc0f, KEY_1 }, - { 0xc17, KEY_2 }, - { 0xc1f, KEY_3 }, - { 0xc27, KEY_4 }, - { 0xc2f, KEY_5 }, - { 0xc37, KEY_6 }, - { 0xc3f, KEY_7 }, - { 0xc47, KEY_8 }, - { 0xc4f, KEY_9 }, - { 0xc57, KEY_KPASTERISK }, - { 0xc77, KEY_GRAVE }, /* # */ - { 0xc5f, KEY_RED }, - { 0xd77, KEY_GREEN }, - { 0xdc7, KEY_YELLOW }, - { 0xd4f, KEY_BLUE}, -}; - -static int dibusb_key2event_nec(struct usb_dibusb *dib,u8 rb[5]) -{ - int i; - switch (rb[0]) { - case DIBUSB_RC_NEC_KEY_PRESSED: - /* rb[1-3] is the actual key, rb[4] is a checksum */ - deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x, 0x%02x\n", - rb[1], rb[2], rb[3], rb[4]); - - if ((0xff - rb[3]) != rb[4]) { - deb_rc("remote control checksum failed.\n"); - break; - } - - /* See if we can match the raw key code. */ - for (i = 0; i < sizeof(nec_rc_keys)/sizeof(nec_rc_keys[0]); i++) { - if (nec_rc_keys[i].c0 == rb[1] && - nec_rc_keys[i].c1 == rb[2] && - nec_rc_keys[i].c2 == rb[3]) { - - dib->last_event = nec_rc_keys[i].key; - return 1; - } - } - break; - case DIBUSB_RC_NEC_KEY_REPEATED: - /* rb[1]..rb[4] are always zero.*/ - /* Repeats often seem to occur so for the moment just ignore this. */ - return 0; - case DIBUSB_RC_NEC_EMPTY: /* No (more) remote control keys. */ - default: - break; - } - return -1; -} - -static int dibusb_key2event_hauppauge(struct usb_dibusb *dib,u8 rb[4]) -{ - u16 raw; - int i,state; - switch (rb[0]) { - case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED: - raw = ((rb[1] & 0x0f) << 8) | rb[2]; - - state = !!(rb[1] & 0x40); - - deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to %04x state: %d\n",rb[1],rb[2],rb[3],raw,state); - for (i = 0; i < sizeof(haupp_rc_keys)/sizeof(haupp_rc_keys[0]); i++) { - if (haupp_rc_keys[i].raw == raw) { - if (dib->last_event == haupp_rc_keys[i].key && - dib->last_state == state) { - deb_rc("key repeat\n"); - return 0; - } else { - dib->last_event = haupp_rc_keys[i].key; - dib->last_state = state; - return 1; - } - } - } - - break; - case DIBUSB_RC_HAUPPAUGE_KEY_EMPTY: - default: - break; - } - return -1; -} - -/* - * Read the remote control and feed the appropriate event. - * NEC protocol is used for remote controls - */ -static int dibusb_read_remote_control(struct usb_dibusb *dib) -{ - u8 b[1] = { DIBUSB_REQ_POLL_REMOTE }, rb[5]; - int ret,event = 0; - - if ((ret = dibusb_readwrite_usb(dib,b,1,rb,5))) - return ret; - - switch (dib->dibdev->dev_cl->remote_type) { - case DIBUSB_RC_NEC_PROTOCOL: - event = dibusb_key2event_nec(dib,rb); - break; - case DIBUSB_RC_HAUPPAUGE_PROTO: - event = dibusb_key2event_hauppauge(dib,rb); - default: - break; - } - - /* key repeat */ - if (event == 0) - if (++dib->repeat_key_count < dib->rc_key_repeat_count) { - deb_rc("key repeat dropped. (%d)\n",dib->repeat_key_count); - event = -1; /* skip this key repeat */ - } - - if (event == 1 || event == 0) { - deb_rc("Translated key 0x%04x\n",event); - - /* Signal down and up events for this key. */ - input_report_key(&dib->rc_input_dev, dib->last_event, 1); - input_report_key(&dib->rc_input_dev, dib->last_event, 0); - input_sync(&dib->rc_input_dev); - - if (event == 1) - dib->repeat_key_count = 0; - } - return 0; -} - -/* Remote-control poll function - called every dib->rc_query_interval ms to see - whether the remote control has received anything. */ -static void dibusb_remote_query(void *data) -{ - struct usb_dibusb *dib = (struct usb_dibusb *) data; - /* TODO: need a lock here. We can simply skip checking for the remote control - if we're busy. */ - dibusb_read_remote_control(dib); - schedule_delayed_work(&dib->rc_query_work, - msecs_to_jiffies(dib->rc_query_interval)); -} - -int dibusb_remote_init(struct usb_dibusb *dib) -{ - int i; - - if (dib->dibdev->dev_cl->remote_type == DIBUSB_RC_NO) - return 0; - - /* Initialise the remote-control structures.*/ - init_input_dev(&dib->rc_input_dev); - - dib->rc_input_dev.evbit[0] = BIT(EV_KEY); - dib->rc_input_dev.keycodesize = sizeof(unsigned char); - dib->rc_input_dev.keycodemax = KEY_MAX; - dib->rc_input_dev.name = DRIVER_DESC " remote control"; - - switch (dib->dibdev->dev_cl->remote_type) { - case DIBUSB_RC_NEC_PROTOCOL: - for (i=0; i<sizeof(nec_rc_keys)/sizeof(nec_rc_keys[0]); i++) - set_bit(nec_rc_keys[i].key, dib->rc_input_dev.keybit); - break; - case DIBUSB_RC_HAUPPAUGE_PROTO: - for (i=0; i<sizeof(haupp_rc_keys)/sizeof(haupp_rc_keys[0]); i++) - set_bit(haupp_rc_keys[i].key, dib->rc_input_dev.keybit); - break; - default: - break; - } - - - input_register_device(&dib->rc_input_dev); - - INIT_WORK(&dib->rc_query_work, dibusb_remote_query, dib); - - /* Start the remote-control polling. */ - if (dib->rc_query_interval < 40) - dib->rc_query_interval = 100; /* default */ - - info("schedule remote query interval to %d msecs.",dib->rc_query_interval); - schedule_delayed_work(&dib->rc_query_work,msecs_to_jiffies(dib->rc_query_interval)); - - dib->init_state |= DIBUSB_STATE_REMOTE; - - return 0; -} - -int dibusb_remote_exit(struct usb_dibusb *dib) -{ - if (dib->dibdev->dev_cl->remote_type == DIBUSB_RC_NO) - return 0; - - if (dib->init_state & DIBUSB_STATE_REMOTE) { - cancel_delayed_work(&dib->rc_query_work); - flush_scheduled_work(); - input_unregister_device(&dib->rc_input_dev); - } - dib->init_state &= ~DIBUSB_STATE_REMOTE; - return 0; -} diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-usb.c b/drivers/media/dvb/dibusb/dvb-dibusb-usb.c deleted file mode 100644 index 642f0596a5ba..000000000000 --- a/drivers/media/dvb/dibusb/dvb-dibusb-usb.c +++ /dev/null @@ -1,303 +0,0 @@ -/* - * dvb-dibusb-usb.c is part of the driver for mobile USB Budget DVB-T devices - * based on reference design made by DiBcom (http://www.dibcom.fr/) - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * see dvb-dibusb-core.c for more copyright details. - * - * This file contains functions for initializing and handling the - * usb specific stuff. - */ -#include "dvb-dibusb.h" - -#include <linux/version.h> -#include <linux/pci.h> - -int dibusb_readwrite_usb(struct usb_dibusb *dib, u8 *wbuf, u16 wlen, u8 *rbuf, - u16 rlen) -{ - int actlen,ret = -ENOMEM; - - if (wbuf == NULL || wlen == 0) - return -EINVAL; - - if ((ret = down_interruptible(&dib->usb_sem))) - return ret; - - debug_dump(wbuf,wlen); - - ret = usb_bulk_msg(dib->udev,usb_sndbulkpipe(dib->udev, - dib->dibdev->dev_cl->pipe_cmd), wbuf,wlen,&actlen, - DIBUSB_I2C_TIMEOUT); - - if (ret) - err("bulk message failed: %d (%d/%d)",ret,wlen,actlen); - else - ret = actlen != wlen ? -1 : 0; - - /* an answer is expected, and no error before */ - if (!ret && rbuf && rlen) { - ret = usb_bulk_msg(dib->udev,usb_rcvbulkpipe(dib->udev, - dib->dibdev->dev_cl->pipe_cmd),rbuf,rlen,&actlen, - DIBUSB_I2C_TIMEOUT); - - if (ret) - err("recv bulk message failed: %d",ret); - else { - deb_alot("rlen: %d\n",rlen); - debug_dump(rbuf,actlen); - } - } - - up(&dib->usb_sem); - return ret; -} - -/* - * Cypress controls - */ -int dibusb_write_usb(struct usb_dibusb *dib, u8 *buf, u16 len) -{ - return dibusb_readwrite_usb(dib,buf,len,NULL,0); -} - -#if 0 -/* - * #if 0'ing the following functions as they are not in use _now_, - * but probably will be sometime. - */ -/* - * do not use this, just a workaround for a bug, - * which will hopefully never occur :). - */ -int dibusb_interrupt_read_loop(struct usb_dibusb *dib) -{ - u8 b[1] = { DIBUSB_REQ_INTR_READ }; - return dibusb_write_usb(dib,b,1); -} -#endif - -/* - * ioctl for the firmware - */ -static int dibusb_ioctl_cmd(struct usb_dibusb *dib, u8 cmd, u8 *param, int plen) -{ - u8 b[34]; - int size = plen > 32 ? 32 : plen; - memset(b,0,34); - b[0] = DIBUSB_REQ_SET_IOCTL; - b[1] = cmd; - - if (size > 0) - memcpy(&b[2],param,size); - - return dibusb_write_usb(dib,b,34); //2+size); -} - -/* - * ioctl for power control - */ -int dibusb_hw_wakeup(struct dvb_frontend *fe) -{ - struct usb_dibusb *dib = (struct usb_dibusb *) fe->dvb->priv; - u8 b[1] = { DIBUSB_IOCTL_POWER_WAKEUP }; - deb_info("dibusb-device is getting up.\n"); - - switch (dib->dibdev->dev_cl->id) { - case DTT200U: - break; - default: - dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_POWER_MODE, b,1); - break; - } - - if (dib->fe_init) - return dib->fe_init(fe); - - return 0; -} - -int dibusb_hw_sleep(struct dvb_frontend *fe) -{ - struct usb_dibusb *dib = (struct usb_dibusb *) fe->dvb->priv; - u8 b[1] = { DIBUSB_IOCTL_POWER_SLEEP }; - deb_info("dibusb-device is going to bed.\n"); - /* workaround, something is wrong, when dibusb 1.1 device are going to bed too late */ - switch (dib->dibdev->dev_cl->id) { - case DIBUSB1_1: - case NOVAT_USB2: - case DTT200U: - break; - default: - dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_POWER_MODE, b,1); - break; - } - if (dib->fe_sleep) - return dib->fe_sleep(fe); - - return 0; -} - -int dibusb_set_streaming_mode(struct usb_dibusb *dib,u8 mode) -{ - u8 b[2] = { DIBUSB_REQ_SET_STREAMING_MODE, mode }; - return dibusb_readwrite_usb(dib,b,2,NULL,0); -} - -static int dibusb_urb_kill(struct usb_dibusb *dib) -{ - int i; -deb_info("trying to kill urbs\n"); - if (dib->init_state & DIBUSB_STATE_URB_SUBMIT) { - for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) { - deb_info("killing URB no. %d.\n",i); - - /* stop the URB */ - usb_kill_urb(dib->urb_list[i]); - } - } else - deb_info(" URBs not killed.\n"); - dib->init_state &= ~DIBUSB_STATE_URB_SUBMIT; - return 0; -} - -static int dibusb_urb_submit(struct usb_dibusb *dib) -{ - int i,ret; - if (dib->init_state & DIBUSB_STATE_URB_INIT) { - for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) { - deb_info("submitting URB no. %d\n",i); - if ((ret = usb_submit_urb(dib->urb_list[i],GFP_ATOMIC))) { - err("could not submit buffer urb no. %d - get them all back\n",i); - dibusb_urb_kill(dib); - return ret; - } - dib->init_state |= DIBUSB_STATE_URB_SUBMIT; - } - } - return 0; -} - -int dibusb_streaming(struct usb_dibusb *dib,int onoff) -{ - if (onoff) - dibusb_urb_submit(dib); - else - dibusb_urb_kill(dib); - - switch (dib->dibdev->dev_cl->id) { - case DIBUSB2_0: - case DIBUSB2_0B: - case NOVAT_USB2: - case UMT2_0: - if (onoff) - return dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_ENABLE_STREAM,NULL,0); - else - return dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_DISABLE_STREAM,NULL,0); - break; - default: - break; - } - return 0; -} - -int dibusb_urb_init(struct usb_dibusb *dib) -{ - int i,bufsize,def_pid_parse = 1; - - /* - * when reloading the driver w/o replugging the device - * a timeout occures, this helps - */ - usb_clear_halt(dib->udev,usb_sndbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_cmd)); - usb_clear_halt(dib->udev,usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_cmd)); - usb_clear_halt(dib->udev,usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_data)); - - /* allocate the array for the data transfer URBs */ - dib->urb_list = kmalloc(dib->dibdev->dev_cl->urb_count*sizeof(struct urb *),GFP_KERNEL); - if (dib->urb_list == NULL) - return -ENOMEM; - memset(dib->urb_list,0,dib->dibdev->dev_cl->urb_count*sizeof(struct urb *)); - - dib->init_state |= DIBUSB_STATE_URB_LIST; - - bufsize = dib->dibdev->dev_cl->urb_count*dib->dibdev->dev_cl->urb_buffer_size; - deb_info("allocate %d bytes as buffersize for all URBs\n",bufsize); - /* allocate the actual buffer for the URBs */ - if ((dib->buffer = pci_alloc_consistent(NULL,bufsize,&dib->dma_handle)) == NULL) { - deb_info("not enough memory.\n"); - return -ENOMEM; - } - deb_info("allocation complete\n"); - memset(dib->buffer,0,bufsize); - - dib->init_state |= DIBUSB_STATE_URB_BUF; - - /* allocate and submit the URBs */ - for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) { - if (!(dib->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC))) { - return -ENOMEM; - } - - usb_fill_bulk_urb( dib->urb_list[i], dib->udev, - usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_data), - &dib->buffer[i*dib->dibdev->dev_cl->urb_buffer_size], - dib->dibdev->dev_cl->urb_buffer_size, - dibusb_urb_complete, dib); - - dib->urb_list[i]->transfer_flags = 0; - - dib->init_state |= DIBUSB_STATE_URB_INIT; - } - - /* dib->pid_parse here contains the value of the module parameter */ - /* decide if pid parsing can be deactivated: - * is possible (by device type) and wanted (by user) - */ - switch (dib->dibdev->dev_cl->id) { - case DIBUSB2_0: - case DIBUSB2_0B: - if (dib->udev->speed == USB_SPEED_HIGH && !dib->pid_parse) { - def_pid_parse = 0; - info("running at HIGH speed, will deliver the complete TS."); - } else - info("will use pid_parsing."); - break; - default: - break; - } - /* from here on it contains the device and user decision */ - dib->pid_parse = def_pid_parse; - - return 0; -} - -int dibusb_urb_exit(struct usb_dibusb *dib) -{ - int i; - - dibusb_urb_kill(dib); - - if (dib->init_state & DIBUSB_STATE_URB_LIST) { - for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) { - if (dib->urb_list[i] != NULL) { - deb_info("freeing URB no. %d.\n",i); - /* free the URBs */ - usb_free_urb(dib->urb_list[i]); - } - } - /* free the urb array */ - kfree(dib->urb_list); - dib->init_state &= ~DIBUSB_STATE_URB_LIST; - } - - if (dib->init_state & DIBUSB_STATE_URB_BUF) - pci_free_consistent(NULL, - dib->dibdev->dev_cl->urb_buffer_size*dib->dibdev->dev_cl->urb_count, - dib->buffer,dib->dma_handle); - - dib->init_state &= ~DIBUSB_STATE_URB_BUF; - dib->init_state &= ~DIBUSB_STATE_URB_INIT; - return 0; -} diff --git a/drivers/media/dvb/dibusb/dvb-dibusb.h b/drivers/media/dvb/dibusb/dvb-dibusb.h deleted file mode 100644 index c965b64fb1ab..000000000000 --- a/drivers/media/dvb/dibusb/dvb-dibusb.h +++ /dev/null @@ -1,327 +0,0 @@ -/* - * dvb-dibusb.h - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation, version 2. - * - * for more information see dvb-dibusb-core.c . - */ -#ifndef __DVB_DIBUSB_H__ -#define __DVB_DIBUSB_H__ - -#include <linux/input.h> -#include <linux/config.h> -#include <linux/usb.h> - -#include "dvb_frontend.h" -#include "dvb_demux.h" -#include "dvb_net.h" -#include "dmxdev.h" - -#include "dib3000.h" -#include "mt352.h" - -/* debug */ -#ifdef CONFIG_DVB_DIBCOM_DEBUG -#define dprintk(level,args...) \ - do { if ((dvb_dibusb_debug & level)) { printk(args); } } while (0) - -#define debug_dump(b,l) {\ - int i; \ - for (i = 0; i < l; i++) deb_xfer("%02x ", b[i]); \ - deb_xfer("\n");\ -} - -#else -#define dprintk(args...) -#define debug_dump(b,l) -#endif - -extern int dvb_dibusb_debug; - -/* Version information */ -#define DRIVER_VERSION "0.3" -#define DRIVER_DESC "DiBcom based USB Budget DVB-T device" -#define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de" - -#define deb_info(args...) dprintk(0x01,args) -#define deb_xfer(args...) dprintk(0x02,args) -#define deb_alot(args...) dprintk(0x04,args) -#define deb_ts(args...) dprintk(0x08,args) -#define deb_err(args...) dprintk(0x10,args) -#define deb_rc(args...) dprintk(0x20,args) - -/* generic log methods - taken from usb.h */ -#undef err -#define err(format, arg...) printk(KERN_ERR "dvb-dibusb: " format "\n" , ## arg) -#undef info -#define info(format, arg...) printk(KERN_INFO "dvb-dibusb: " format "\n" , ## arg) -#undef warn -#define warn(format, arg...) printk(KERN_WARNING "dvb-dibusb: " format "\n" , ## arg) - -struct dibusb_usb_controller { - const char *name; /* name of the usb controller */ - u16 cpu_cs_register; /* needs to be restarted, when the firmware has been downloaded. */ -}; - -typedef enum { - DIBUSB1_1 = 0, - DIBUSB1_1_AN2235, - DIBUSB2_0, - UMT2_0, - DIBUSB2_0B, - NOVAT_USB2, - DTT200U, -} dibusb_class_t; - -typedef enum { - DIBUSB_TUNER_CABLE_THOMSON = 0, - DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5, - DIBUSB_TUNER_CABLE_LG_TDTP_E102P, - DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5, -} dibusb_tuner_t; - -typedef enum { - DIBUSB_DIB3000MB = 0, - DIBUSB_DIB3000MC, - DIBUSB_MT352, - DTT200U_FE, -} dibusb_demodulator_t; - -typedef enum { - DIBUSB_RC_NO = 0, - DIBUSB_RC_NEC_PROTOCOL, - DIBUSB_RC_HAUPPAUGE_PROTO, -} dibusb_remote_t; - -struct dibusb_tuner { - dibusb_tuner_t id; - - u8 pll_addr; /* tuner i2c address */ -}; -extern struct dibusb_tuner dibusb_tuner[]; - -#define DIBUSB_POSSIBLE_I2C_ADDR_NUM 4 -struct dibusb_demod { - dibusb_demodulator_t id; - - int pid_filter_count; /* counter of the internal pid_filter */ - u8 i2c_addrs[DIBUSB_POSSIBLE_I2C_ADDR_NUM]; /* list of possible i2c addresses of the demod */ -}; - -#define DIBUSB_MAX_TUNER_NUM 2 -struct dibusb_device_class { - dibusb_class_t id; - - const struct dibusb_usb_controller *usb_ctrl; /* usb controller */ - const char *firmware; /* valid firmware filenames */ - - int pipe_cmd; /* command pipe (read/write) */ - int pipe_data; /* data pipe */ - - int urb_count; /* number of data URBs to be submitted */ - int urb_buffer_size; /* the size of the buffer for each URB */ - - dibusb_remote_t remote_type; /* does this device have a ir-receiver */ - - struct dibusb_demod *demod; /* which demodulator is mount */ - struct dibusb_tuner *tuner; /* which tuner can be found here */ -}; - -#define DIBUSB_ID_MAX_NUM 15 -struct dibusb_usb_device { - const char *name; /* real name of the box */ - struct dibusb_device_class *dev_cl; /* which dibusb_device_class is this device part of */ - - struct usb_device_id *cold_ids[DIBUSB_ID_MAX_NUM]; /* list of USB ids when this device is at pre firmware state */ - struct usb_device_id *warm_ids[DIBUSB_ID_MAX_NUM]; /* list of USB ids when this device is at post firmware state */ -}; - -/* a PID for the pid_filter list, when in use */ -struct dibusb_pid -{ - int index; - u16 pid; - int active; -}; - -struct usb_dibusb { - /* usb */ - struct usb_device * udev; - - struct dibusb_usb_device * dibdev; - -#define DIBUSB_STATE_INIT 0x000 -#define DIBUSB_STATE_URB_LIST 0x001 -#define DIBUSB_STATE_URB_BUF 0x002 -#define DIBUSB_STATE_URB_INIT 0x004 -#define DIBUSB_STATE_DVB 0x008 -#define DIBUSB_STATE_I2C 0x010 -#define DIBUSB_STATE_REMOTE 0x020 -#define DIBUSB_STATE_URB_SUBMIT 0x040 - int init_state; - - int feedcount; - struct dib_fe_xfer_ops xfer_ops; - - struct dibusb_tuner *tuner; - - struct urb **urb_list; - u8 *buffer; - dma_addr_t dma_handle; - - /* I2C */ - struct i2c_adapter i2c_adap; - - /* locking */ - struct semaphore usb_sem; - struct semaphore i2c_sem; - - /* dvb */ - struct dvb_adapter adapter; - struct dmxdev dmxdev; - struct dvb_demux demux; - struct dvb_net dvb_net; - struct dvb_frontend* fe; - - int (*fe_sleep) (struct dvb_frontend *); - int (*fe_init) (struct dvb_frontend *); - - /* remote control */ - struct input_dev rc_input_dev; - struct work_struct rc_query_work; - int last_event; - int last_state; /* for Hauppauge RC protocol */ - int repeat_key_count; - int rc_key_repeat_count; /* module parameter */ - - /* module parameters */ - int pid_parse; - int rc_query_interval; -}; - -/* commonly used functions in the separated files */ - -/* dvb-dibusb-firmware.c */ -int dibusb_loadfirmware(struct usb_device *udev, struct dibusb_usb_device *dibdev); - -/* dvb-dibusb-remote.c */ -int dibusb_remote_exit(struct usb_dibusb *dib); -int dibusb_remote_init(struct usb_dibusb *dib); - -/* dvb-dibusb-fe-i2c.c */ -int dibusb_fe_init(struct usb_dibusb* dib); -int dibusb_fe_exit(struct usb_dibusb *dib); -int dibusb_i2c_init(struct usb_dibusb *dib); -int dibusb_i2c_exit(struct usb_dibusb *dib); - -/* dvb-dibusb-dvb.c */ -void dibusb_urb_complete(struct urb *urb, struct pt_regs *ptregs); -int dibusb_dvb_init(struct usb_dibusb *dib); -int dibusb_dvb_exit(struct usb_dibusb *dib); - -/* dvb-dibusb-usb.c */ -int dibusb_readwrite_usb(struct usb_dibusb *dib, u8 *wbuf, u16 wlen, u8 *rbuf, - u16 rlen); -int dibusb_write_usb(struct usb_dibusb *dib, u8 *buf, u16 len); - -int dibusb_hw_wakeup(struct dvb_frontend *); -int dibusb_hw_sleep(struct dvb_frontend *); -int dibusb_set_streaming_mode(struct usb_dibusb *,u8); -int dibusb_streaming(struct usb_dibusb *,int); - -int dibusb_urb_init(struct usb_dibusb *); -int dibusb_urb_exit(struct usb_dibusb *); - -/* dvb-fe-dtt200u.c */ -struct dvb_frontend* dtt200u_fe_attach(struct usb_dibusb *,struct dib_fe_xfer_ops *); - -/* i2c and transfer stuff */ -#define DIBUSB_I2C_TIMEOUT 5000 - -/* - * protocol of all dibusb related devices - */ - -/* - * bulk msg to/from endpoint 0x01 - * - * general structure: - * request_byte parameter_bytes - */ - -#define DIBUSB_REQ_START_READ 0x00 -#define DIBUSB_REQ_START_DEMOD 0x01 - -/* - * i2c read - * bulk write: 0x02 ((7bit i2c_addr << 1) & 0x01) register_bytes length_word - * bulk read: byte_buffer (length_word bytes) - */ -#define DIBUSB_REQ_I2C_READ 0x02 - -/* - * i2c write - * bulk write: 0x03 (7bit i2c_addr << 1) register_bytes value_bytes - */ -#define DIBUSB_REQ_I2C_WRITE 0x03 - -/* - * polling the value of the remote control - * bulk write: 0x04 - * bulk read: byte_buffer (5 bytes) - * - * first byte of byte_buffer shows the status (0x00, 0x01, 0x02) - */ -#define DIBUSB_REQ_POLL_REMOTE 0x04 - -#define DIBUSB_RC_NEC_EMPTY 0x00 -#define DIBUSB_RC_NEC_KEY_PRESSED 0x01 -#define DIBUSB_RC_NEC_KEY_REPEATED 0x02 - -/* additional status values for Hauppauge Remote Control Protocol */ -#define DIBUSB_RC_HAUPPAUGE_KEY_PRESSED 0x01 -#define DIBUSB_RC_HAUPPAUGE_KEY_EMPTY 0x03 - -/* streaming mode: - * bulk write: 0x05 mode_byte - * - * mode_byte is mostly 0x00 - */ -#define DIBUSB_REQ_SET_STREAMING_MODE 0x05 - -/* interrupt the internal read loop, when blocking */ -#define DIBUSB_REQ_INTR_READ 0x06 - -/* io control - * 0x07 cmd_byte param_bytes - * - * param_bytes can be up to 32 bytes - * - * cmd_byte function parameter name - * 0x00 power mode - * 0x00 sleep - * 0x01 wakeup - * - * 0x01 enable streaming - * 0x02 disable streaming - * - * - */ -#define DIBUSB_REQ_SET_IOCTL 0x07 - -/* IOCTL commands */ - -/* change the power mode in firmware */ -#define DIBUSB_IOCTL_CMD_POWER_MODE 0x00 -#define DIBUSB_IOCTL_POWER_SLEEP 0x00 -#define DIBUSB_IOCTL_POWER_WAKEUP 0x01 - -/* modify streaming of the FX2 */ -#define DIBUSB_IOCTL_CMD_ENABLE_STREAM 0x01 -#define DIBUSB_IOCTL_CMD_DISABLE_STREAM 0x02 - -#endif diff --git a/drivers/media/dvb/dibusb/dvb-fe-dtt200u.c b/drivers/media/dvb/dibusb/dvb-fe-dtt200u.c deleted file mode 100644 index 1872aa6d200a..000000000000 --- a/drivers/media/dvb/dibusb/dvb-fe-dtt200u.c +++ /dev/null @@ -1,263 +0,0 @@ -/* - * dvb-dtt200u-fe.c is a driver which implements the frontend-part of the - * Yakumo/Typhoon/Hama USB2.0 boxes. It is hard-wired to the dibusb-driver as - * it uses the usb-transfer functions directly (maybe creating a - * generic-dvb-usb-lib for all usb-drivers will be reduce some more code.) - * - * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de> - * - * see dvb-dibusb-core.c for copyright details. - */ - -/* guessed protocol description (reverse engineered): - * read - * 00 - USB type 0x02 for usb2.0, 0x01 for usb1.1 - * 81 - <TS_LOCK> <current frequency divided by 250000> - * 82 - crash - do not touch - * 83 - crash - do not touch - * 84 - remote control - * 85 - crash - do not touch (OK, stop testing here) - * 88 - locking 2 bytes (0x80 0x40 == no signal, 0x89 0x20 == nice signal) - * 89 - noise-to-signal - * 8a - unkown 1 byte - signal_strength - * 8c - ber ??? - * 8d - ber - * 8e - unc - * - * write - * 02 - bandwidth - * 03 - frequency (divided by 250000) - * 04 - pid table (index pid(7:0) pid(12:8)) - * 05 - reset the pid table - * 08 - demod transfer enabled or not (FX2 transfer is enabled by default) - */ - -#include "dvb-dibusb.h" -#include "dvb_frontend.h" - -struct dtt200u_fe_state { - struct usb_dibusb *dib; - - struct dvb_frontend_parameters fep; - struct dvb_frontend frontend; -}; - -#define moan(which,what) info("unexpected value in '%s' for cmd '%02x' - please report to linux-dvb@linuxtv.org",which,what) - -static int dtt200u_fe_read_status(struct dvb_frontend* fe, fe_status_t *stat) -{ - struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw[1] = { 0x81 }; - u8 br[3] = { 0 }; -// u8 bdeb[5] = { 0 }; - - dibusb_readwrite_usb(state->dib,bw,1,br,3); - switch (br[0]) { - case 0x01: - *stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; - break; - case 0x00: - *stat = 0; - break; - default: - moan("br[0]",0x81); - break; - } - -// bw[0] = 0x88; -// dibusb_readwrite_usb(state->dib,bw,1,bdeb,5); - -// deb_info("%02x: %02x %02x %02x %02x %02x\n",bw[0],bdeb[0],bdeb[1],bdeb[2],bdeb[3],bdeb[4]); - - return 0; -} -static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber) -{ - struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw[1] = { 0x8d }; - *ber = 0; - dibusb_readwrite_usb(state->dib,bw,1,(u8*) ber, 3); - return 0; -} - -static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) -{ - struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw[1] = { 0x8c }; - *unc = 0; - dibusb_readwrite_usb(state->dib,bw,1,(u8*) unc, 3); - return 0; -} - -static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) -{ - struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw[1] = { 0x8a }; - u8 b; - dibusb_readwrite_usb(state->dib,bw,1,&b, 1); - *strength = (b << 8) | b; - return 0; -} - -static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr) -{ - struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw[1] = { 0x89 }; - u8 br[1] = { 0 }; - dibusb_readwrite_usb(state->dib,bw,1,br,1); - *snr = ((0xff - br[0]) << 8) | (0xff - br[0]); - return 0; -} - -static int dtt200u_fe_init(struct dvb_frontend* fe) -{ - struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 b[] = { 0x01 }; - return dibusb_write_usb(state->dib,b,1); -} - -static int dtt200u_fe_sleep(struct dvb_frontend* fe) -{ - return dtt200u_fe_init(fe); -} - -static int dtt200u_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) -{ - tune->min_delay_ms = 1500; - tune->step_size = 166667; - tune->max_drift = 166667 * 2; - return 0; -} - -static int dtt200u_fe_set_frontend(struct dvb_frontend* fe, - struct dvb_frontend_parameters *fep) -{ - struct dtt200u_fe_state *state = fe->demodulator_priv; - u16 freq = fep->frequency / 250000; - u8 bw,bwbuf[2] = { 0x03, 0 }, freqbuf[3] = { 0x02, 0, 0 }; - - switch (fep->u.ofdm.bandwidth) { - case BANDWIDTH_8_MHZ: bw = 8; break; - case BANDWIDTH_7_MHZ: bw = 7; break; - case BANDWIDTH_6_MHZ: bw = 6; break; - case BANDWIDTH_AUTO: return -EOPNOTSUPP; - default: - return -EINVAL; - } - deb_info("set_frontend\n"); - - bwbuf[1] = bw; - dibusb_write_usb(state->dib,bwbuf,2); - - freqbuf[1] = freq & 0xff; - freqbuf[2] = (freq >> 8) & 0xff; - dibusb_write_usb(state->dib,freqbuf,3); - - memcpy(&state->fep,fep,sizeof(struct dvb_frontend_parameters)); - - return 0; -} - -static int dtt200u_fe_get_frontend(struct dvb_frontend* fe, - struct dvb_frontend_parameters *fep) -{ - struct dtt200u_fe_state *state = fe->demodulator_priv; - memcpy(fep,&state->fep,sizeof(struct dvb_frontend_parameters)); - return 0; -} - -static void dtt200u_fe_release(struct dvb_frontend* fe) -{ - struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv; - kfree(state); -} - -static int dtt200u_pid_control(struct dvb_frontend *fe,int index, int pid,int onoff) -{ - struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv; - u8 b_pid[4]; - pid = onoff ? pid : 0; - - b_pid[0] = 0x04; - b_pid[1] = index; - b_pid[2] = pid & 0xff; - b_pid[3] = (pid >> 8) & 0xff; - - dibusb_write_usb(state->dib,b_pid,4); - return 0; -} - -static int dtt200u_fifo_control(struct dvb_frontend *fe, int onoff) -{ - struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv; - u8 b_streaming[2] = { 0x08, onoff }; - u8 b_rst_pid[1] = { 0x05 }; - - dibusb_write_usb(state->dib,b_streaming,2); - - if (!onoff) - dibusb_write_usb(state->dib,b_rst_pid,1); - return 0; -} - -static struct dvb_frontend_ops dtt200u_fe_ops; - -struct dvb_frontend* dtt200u_fe_attach(struct usb_dibusb *dib, struct dib_fe_xfer_ops *xfer_ops) -{ - struct dtt200u_fe_state* state = NULL; - - /* allocate memory for the internal state */ - state = (struct dtt200u_fe_state*) kmalloc(sizeof(struct dtt200u_fe_state), GFP_KERNEL); - if (state == NULL) - goto error; - memset(state,0,sizeof(struct dtt200u_fe_state)); - - deb_info("attaching frontend dtt200u\n"); - - state->dib = dib; - - state->frontend.ops = &dtt200u_fe_ops; - state->frontend.demodulator_priv = state; - - xfer_ops->fifo_ctrl = dtt200u_fifo_control; - xfer_ops->pid_ctrl = dtt200u_pid_control; - - goto success; -error: - return NULL; -success: - return &state->frontend; -} - -static struct dvb_frontend_ops dtt200u_fe_ops = { - .info = { - .name = "DTT200U (Yakumo/Typhoon/Hama) DVB-T", - .type = FE_OFDM, - .frequency_min = 44250000, - .frequency_max = 867250000, - .frequency_stepsize = 250000, - .caps = FE_CAN_INVERSION_AUTO | - FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | - FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | - FE_CAN_TRANSMISSION_MODE_AUTO | - FE_CAN_GUARD_INTERVAL_AUTO | - FE_CAN_RECOVER | - FE_CAN_HIERARCHY_AUTO, - }, - - .release = dtt200u_fe_release, - - .init = dtt200u_fe_init, - .sleep = dtt200u_fe_sleep, - - .set_frontend = dtt200u_fe_set_frontend, - .get_frontend = dtt200u_fe_get_frontend, - .get_tune_settings = dtt200u_fe_get_tune_settings, - - .read_status = dtt200u_fe_read_status, - .read_ber = dtt200u_fe_read_ber, - .read_signal_strength = dtt200u_fe_read_signal_strength, - .read_snr = dtt200u_fe_read_snr, - .read_ucblocks = dtt200u_fe_read_unc_blocks, -}; |