Merge tag 'v5.13-rc4' into media_tree

Linux 5.13-rc4

* tag 'v5.13-rc4': (976 commits)
  Linux 5.13-rc4
  seccomp: Refactor notification handler to prepare for new semantics
  selftests: kvm: fix overlapping addresses in memslot_perf_test
  KVM: X86: Kill off ctxt->ud
  KVM: X86: Fix warning caused by stale emulation context
  KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
  Documentation: seccomp: Fix user notification documentation
  MAINTAINERS: adjust to removing i2c designware platform data
  perf vendor events powerpc: Fix eventcode of power10 JSON events
  Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
  i2c: s3c2410: fix possible NULL pointer deref on read message after write
  i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
  perf stat: Fix error check for bpf_program__attach
  cifs: change format of CIFS_FULL_KEY_DUMP ioctl
  i2c: i801: Don't generate an interrupt on bus reset
  i2c: mpc: implement erratum A-004447 workaround
  powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
  powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
  dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
  i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
  ...

5 files changed, 17 insertions, 22 deletions

diff --git a/drivers/media/dvb-frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c
index 655db8272268..9767159aeb9b 100644
--- a/drivers/media/dvb-frontends/sp8870.c
+++ b/drivers/media/dvb-frontends/sp8870.c
@@ -281,7 +281,7 @@ static int sp8870_set_frontend_parameters(struct dvb_frontend *fe)
 
 	// read status reg in order to clear pending irqs
 	err = sp8870_readreg(state, 0x200);
-	if (err)
+	if (err < 0)
 		return err;
 
 	// system controller start
diff --git a/drivers/media/platform/rcar_drif.c b/drivers/media/platform/rcar_drif.c
index 83bd9a412a56..1e3b68a8743a 100644
--- a/drivers/media/platform/rcar_drif.c
+++ b/drivers/media/platform/rcar_drif.c
@@ -915,7 +915,6 @@ static int rcar_drif_g_fmt_sdr_cap(struct file *file, void *priv,
 {
 	struct rcar_drif_sdr *sdr = video_drvdata(file);
 
-	memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
 	f->fmt.sdr.pixelformat = sdr->fmt->pixelformat;
 	f->fmt.sdr.buffersize = sdr->fmt->buffersize;
 
diff --git a/drivers/media/usb/gspca/cpia1.c b/drivers/media/usb/gspca/cpia1.c
index a4f7431486f3..d93d384286c1 100644
--- a/drivers/media/usb/gspca/cpia1.c
+++ b/drivers/media/usb/gspca/cpia1.c
@@ -1424,7 +1424,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
-	int ret;
 
 	sd->mainsFreq = FREQ_DEF == V4L2_CID_POWER_LINE_FREQUENCY_60HZ;
 	reset_camera_params(gspca_dev);
@@ -1436,10 +1435,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	cam->cam_mode = mode;
 	cam->nmodes = ARRAY_SIZE(mode);
 
-	ret = goto_low_power(gspca_dev);
-	if (ret)
-		gspca_err(gspca_dev, "Cannot go to low power mode: %d\n",
-			  ret);
+	goto_low_power(gspca_dev);
 	/* Check the firmware version. */
 	sd->params.version.firmwareVersion = 0;
 	get_version_information(gspca_dev);
diff --git a/drivers/media/usb/gspca/m5602/m5602_mt9m111.c b/drivers/media/usb/gspca/m5602/m5602_mt9m111.c
index bfa3b381d8a2..bf1af6ed9131 100644
--- a/drivers/media/usb/gspca/m5602/m5602_mt9m111.c
+++ b/drivers/media/usb/gspca/m5602/m5602_mt9m111.c
@@ -195,7 +195,7 @@ static const struct v4l2_ctrl_config mt9m111_greenbal_cfg = {
 int mt9m111_probe(struct sd *sd)
 {
 	u8 data[2] = {0x00, 0x00};
-	int i, rc = 0;
+	int i, err;
 	struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;
 
 	if (force_sensor) {
@@ -213,18 +213,18 @@ int mt9m111_probe(struct sd *sd)
 	/* Do the preinit */
 	for (i = 0; i < ARRAY_SIZE(preinit_mt9m111); i++) {
 		if (preinit_mt9m111[i][0] == BRIDGE) {
-			rc |= m5602_write_bridge(sd,
-				preinit_mt9m111[i][1],
-				preinit_mt9m111[i][2]);
+			err = m5602_write_bridge(sd,
+					preinit_mt9m111[i][1],
+					preinit_mt9m111[i][2]);
 		} else {
 			data[0] = preinit_mt9m111[i][2];
 			data[1] = preinit_mt9m111[i][3];
-			rc |= m5602_write_sensor(sd,
-				preinit_mt9m111[i][1], data, 2);
+			err = m5602_write_sensor(sd,
+					preinit_mt9m111[i][1], data, 2);
 		}
+		if (err < 0)
+			return err;
 	}
-	if (rc < 0)
-		return rc;
 
 	if (m5602_read_sensor(sd, MT9M111_SC_CHIPVER, data, 2))
 		return -ENODEV;
diff --git a/drivers/media/usb/gspca/m5602/m5602_po1030.c b/drivers/media/usb/gspca/m5602/m5602_po1030.c
index d680b777f097..8fd99ceee4b6 100644
--- a/drivers/media/usb/gspca/m5602/m5602_po1030.c
+++ b/drivers/media/usb/gspca/m5602/m5602_po1030.c
@@ -154,8 +154,8 @@ static const struct v4l2_ctrl_config po1030_greenbal_cfg = {
 
 int po1030_probe(struct sd *sd)
 {
-	int rc = 0;
 	u8 dev_id_h = 0, i;
+	int err;
 	struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;
 
 	if (force_sensor) {
@@ -174,14 +174,14 @@ int po1030_probe(struct sd *sd)
 	for (i = 0; i < ARRAY_SIZE(preinit_po1030); i++) {
 		u8 data = preinit_po1030[i][2];
 		if (preinit_po1030[i][0] == SENSOR)
-			rc |= m5602_write_sensor(sd,
-				preinit_po1030[i][1], &data, 1);
+			err = m5602_write_sensor(sd, preinit_po1030[i][1],
+						 &data, 1);
 		else
-			rc |= m5602_write_bridge(sd, preinit_po1030[i][1],
-						data);
+			err = m5602_write_bridge(sd, preinit_po1030[i][1],
+						 data);
+		if (err < 0)
+			return err;
 	}
-	if (rc < 0)
-		return rc;
 
 	if (m5602_read_sensor(sd, PO1030_DEVID_H, &dev_id_h, 1))
 		return -ENODEV;