diff options
author | Eric Nelson <eric@nelint.com> | 2015-09-23 11:07:08 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@osg.samsung.com> | 2015-11-19 07:46:33 -0200 |
commit | 3fb136f3392dfb2530fd490718b0652f1001b36b (patch) | |
tree | a10d27b48f979a03814e6678c7682b40a1451d3d /drivers/media | |
parent | c8e1bbc52d259a07a81b0f845191ee901ff44e01 (diff) | |
download | linux-3fb136f3392dfb2530fd490718b0652f1001b36b.tar.bz2 |
[media] rc: gpio-ir-recv: add timeout on idle
Many decoders require a trailing space (period without IR illumination)
to be delivered before completing a decode.
Since the gpio-ir-recv driver only delivers events on gpio transitions,
a single IR symbol (caused by a quick touch on an IR remote) will not
be properly decoded without the use of a timer to flush the tail end
state of the IR receiver.
This patch initializes and uses a timer and the timeout field of rcdev
to complete the stream and allow decode.
The timeout can be overridden through the use of the LIRC_SET_REC_TIMEOUT
ioctl.
Signed-off-by: Eric Nelson <eric@nelint.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Diffstat (limited to 'drivers/media')
-rw-r--r-- | drivers/media/rc/gpio-ir-recv.c | 22 |
1 files changed, 22 insertions, 0 deletions
diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c index 6050de1142a6..5b63b1f15cb1 100644 --- a/drivers/media/rc/gpio-ir-recv.c +++ b/drivers/media/rc/gpio-ir-recv.c @@ -30,6 +30,7 @@ struct gpio_rc_dev { struct rc_dev *rcdev; int gpio_nr; bool active_low; + struct timer_list flush_timer; }; #ifdef CONFIG_OF @@ -93,12 +94,26 @@ static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id) if (rc < 0) goto err_get_value; + mod_timer(&gpio_dev->flush_timer, + jiffies + nsecs_to_jiffies(gpio_dev->rcdev->timeout)); + ir_raw_event_handle(gpio_dev->rcdev); err_get_value: return IRQ_HANDLED; } +static void flush_timer(unsigned long arg) +{ + struct gpio_rc_dev *gpio_dev = (struct gpio_rc_dev *)arg; + DEFINE_IR_RAW_EVENT(ev); + + ev.timeout = true; + ev.duration = gpio_dev->rcdev->timeout; + ir_raw_event_store(gpio_dev->rcdev, &ev); + ir_raw_event_handle(gpio_dev->rcdev); +} + static int gpio_ir_recv_probe(struct platform_device *pdev) { struct gpio_rc_dev *gpio_dev; @@ -144,6 +159,9 @@ static int gpio_ir_recv_probe(struct platform_device *pdev) rcdev->input_id.version = 0x0100; rcdev->dev.parent = &pdev->dev; rcdev->driver_name = GPIO_IR_DRIVER_NAME; + rcdev->min_timeout = 0; + rcdev->timeout = IR_DEFAULT_TIMEOUT; + rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT; if (pdata->allowed_protos) rcdev->allowed_protocols = pdata->allowed_protos; else @@ -154,6 +172,9 @@ static int gpio_ir_recv_probe(struct platform_device *pdev) gpio_dev->gpio_nr = pdata->gpio_nr; gpio_dev->active_low = pdata->active_low; + setup_timer(&gpio_dev->flush_timer, flush_timer, + (unsigned long)gpio_dev); + rc = gpio_request(pdata->gpio_nr, "gpio-ir-recv"); if (rc < 0) goto err_gpio_request; @@ -196,6 +217,7 @@ static int gpio_ir_recv_remove(struct platform_device *pdev) struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev); free_irq(gpio_to_irq(gpio_dev->gpio_nr), gpio_dev); + del_timer_sync(&gpio_dev->flush_timer); rc_unregister_device(gpio_dev->rcdev); gpio_free(gpio_dev->gpio_nr); kfree(gpio_dev); |