diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/media/video/bw-qcam.c | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/media/video/bw-qcam.c')
-rw-r--r-- | drivers/media/video/bw-qcam.c | 1027 |
1 files changed, 1027 insertions, 0 deletions
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c new file mode 100644 index 000000000000..0065d0c240d1 --- /dev/null +++ b/drivers/media/video/bw-qcam.c @@ -0,0 +1,1027 @@ +/* + * QuickCam Driver For Video4Linux. + * + * Video4Linux conversion work by Alan Cox. + * Parport compatibility by Phil Blundell. + * Busy loop avoidance by Mark Cooke. + * + * Module parameters: + * + * maxpoll=<1 - 5000> + * + * When polling the QuickCam for a response, busy-wait for a + * maximum of this many loops. The default of 250 gives little + * impact on interactive response. + * + * NOTE: If this parameter is set too high, the processor + * will busy wait until this loop times out, and then + * slowly poll for a further 5 seconds before failing + * the transaction. You have been warned. + * + * yieldlines=<1 - 250> + * + * When acquiring a frame from the camera, the data gathering + * loop will yield back to the scheduler after completing + * this many lines. The default of 4 provides a trade-off + * between increased frame acquisition time and impact on + * interactive response. + */ + +/* qcam-lib.c -- Library for programming with the Connectix QuickCam. + * See the included documentation for usage instructions and details + * of the protocol involved. */ + + +/* Version 0.5, August 4, 1996 */ +/* Version 0.7, August 27, 1996 */ +/* Version 0.9, November 17, 1996 */ + + +/****************************************************************** + +Copyright (C) 1996 by Scott Laird + +Permission is hereby granted, free of charge, to any person obtaining +a copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sublicense, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +The above copyright notice and this permission notice shall be +included in all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +IN NO EVENT SHALL SCOTT LAIRD BE LIABLE FOR ANY CLAIM, DAMAGES OR +OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +OTHER DEALINGS IN THE SOFTWARE. + +******************************************************************/ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/parport.h> +#include <linux/sched.h> +#include <linux/videodev.h> +#include <asm/semaphore.h> +#include <asm/uaccess.h> + +#include "bw-qcam.h" + +static unsigned int maxpoll=250; /* Maximum busy-loop count for qcam I/O */ +static unsigned int yieldlines=4; /* Yield after this many during capture */ +static int video_nr = -1; + +module_param(maxpoll, int, 0); +module_param(yieldlines, int, 0); +module_param(video_nr, int, 0); + +static inline int read_lpstatus(struct qcam_device *q) +{ + return parport_read_status(q->pport); +} + +static inline int read_lpdata(struct qcam_device *q) +{ + return parport_read_data(q->pport); +} + +static inline void write_lpdata(struct qcam_device *q, int d) +{ + parport_write_data(q->pport, d); +} + +static inline void write_lpcontrol(struct qcam_device *q, int d) +{ + parport_write_control(q->pport, d); +} + +static int qc_waithand(struct qcam_device *q, int val); +static int qc_command(struct qcam_device *q, int command); +static int qc_readparam(struct qcam_device *q); +static int qc_setscanmode(struct qcam_device *q); +static int qc_readbytes(struct qcam_device *q, char buffer[]); + +static struct video_device qcam_template; + +static int qc_calibrate(struct qcam_device *q) +{ + /* + * Bugfix by Hanno Mueller hmueller@kabel.de, Mai 21 96 + * The white balance is an individiual value for each + * quickcam. + */ + + int value; + int count = 0; + + qc_command(q, 27); /* AutoAdjustOffset */ + qc_command(q, 0); /* Dummy Parameter, ignored by the camera */ + + /* GetOffset (33) will read 255 until autocalibration */ + /* is finished. After that, a value of 1-254 will be */ + /* returned. */ + + do { + qc_command(q, 33); + value = qc_readparam(q); + mdelay(1); + schedule(); + count++; + } while (value == 0xff && count<2048); + + q->whitebal = value; + return value; +} + +/* Initialize the QuickCam driver control structure. This is where + * defaults are set for people who don't have a config file.*/ + +static struct qcam_device *qcam_init(struct parport *port) +{ + struct qcam_device *q; + + q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL); + if(q==NULL) + return NULL; + + q->pport = port; + q->pdev = parport_register_device(port, "bw-qcam", NULL, NULL, + NULL, 0, NULL); + if (q->pdev == NULL) + { + printk(KERN_ERR "bw-qcam: couldn't register for %s.\n", + port->name); + kfree(q); + return NULL; + } + + memcpy(&q->vdev, &qcam_template, sizeof(qcam_template)); + + init_MUTEX(&q->lock); + + q->port_mode = (QC_ANY | QC_NOTSET); + q->width = 320; + q->height = 240; + q->bpp = 4; + q->transfer_scale = 2; + q->contrast = 192; + q->brightness = 180; + q->whitebal = 105; + q->top = 1; + q->left = 14; + q->mode = -1; + q->status = QC_PARAM_CHANGE; + return q; +} + + +/* qc_command is probably a bit of a misnomer -- it's used to send + * bytes *to* the camera. Generally, these bytes are either commands + * or arguments to commands, so the name fits, but it still bugs me a + * bit. See the documentation for a list of commands. */ + +static int qc_command(struct qcam_device *q, int command) +{ + int n1, n2; + int cmd; + + write_lpdata(q, command); + write_lpcontrol(q, 6); + + n1 = qc_waithand(q, 1); + + write_lpcontrol(q, 0xe); + n2 = qc_waithand(q, 0); + + cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4); + return cmd; +} + +static int qc_readparam(struct qcam_device *q) +{ + int n1, n2; + int cmd; + + write_lpcontrol(q, 6); + n1 = qc_waithand(q, 1); + + write_lpcontrol(q, 0xe); + n2 = qc_waithand(q, 0); + + cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4); + return cmd; +} + +/* qc_waithand busy-waits for a handshake signal from the QuickCam. + * Almost all communication with the camera requires handshaking. */ + +static int qc_waithand(struct qcam_device *q, int val) +{ + int status; + int runs=0; + + if (val) + { + while (!((status = read_lpstatus(q)) & 8)) + { + /* 1000 is enough spins on the I/O for all normal + cases, at that point we start to poll slowly + until the camera wakes up. However, we are + busy blocked until the camera responds, so + setting it lower is much better for interactive + response. */ + + if(runs++>maxpoll) + { + msleep_interruptible(5); + } + if(runs>(maxpoll+1000)) /* 5 seconds */ + return -1; + } + } + else + { + while (((status = read_lpstatus(q)) & 8)) + { + /* 1000 is enough spins on the I/O for all normal + cases, at that point we start to poll slowly + until the camera wakes up. However, we are + busy blocked until the camera responds, so + setting it lower is much better for interactive + response. */ + + if(runs++>maxpoll) + { + msleep_interruptible(5); + } + if(runs++>(maxpoll+1000)) /* 5 seconds */ + return -1; + } + } + + return status; +} + +/* Waithand2 is used when the qcam is in bidirectional mode, and the + * handshaking signal is CamRdy2 (bit 0 of data reg) instead of CamRdy1 + * (bit 3 of status register). It also returns the last value read, + * since this data is useful. */ + +static unsigned int qc_waithand2(struct qcam_device *q, int val) +{ + unsigned int status; + int runs=0; + + do + { + status = read_lpdata(q); + /* 1000 is enough spins on the I/O for all normal + cases, at that point we start to poll slowly + until the camera wakes up. However, we are + busy blocked until the camera responds, so + setting it lower is much better for interactive + response. */ + + if(runs++>maxpoll) + { + msleep_interruptible(5); + } + if(runs++>(maxpoll+1000)) /* 5 seconds */ + return 0; + } + while ((status & 1) != val); + + return status; +} + + +/* Try to detect a QuickCam. It appears to flash the upper 4 bits of + the status register at 5-10 Hz. This is only used in the autoprobe + code. Be aware that this isn't the way Connectix detects the + camera (they send a reset and try to handshake), but this should be + almost completely safe, while their method screws up my printer if + I plug it in before the camera. */ + +static int qc_detect(struct qcam_device *q) +{ + int reg, lastreg; + int count = 0; + int i; + + lastreg = reg = read_lpstatus(q) & 0xf0; + + for (i = 0; i < 500; i++) + { + reg = read_lpstatus(q) & 0xf0; + if (reg != lastreg) + count++; + lastreg = reg; + mdelay(2); + } + + +#if 0 + /* Force camera detection during testing. Sometimes the camera + won't be flashing these bits. Possibly unloading the module + in the middle of a grab? Or some timeout condition? + I've seen this parameter as low as 19 on my 450Mhz box - mpc */ + printk("Debugging: QCam detection counter <30-200 counts as detected>: %d\n", count); + return 1; +#endif + + /* Be (even more) liberal in what you accept... */ + +/* if (count > 30 && count < 200) */ + if (count > 20 && count < 300) + return 1; /* found */ + else + return 0; /* not found */ +} + + +/* Reset the QuickCam. This uses the same sequence the Windows + * QuickPic program uses. Someone with a bi-directional port should + * check that bi-directional mode is detected right, and then + * implement bi-directional mode in qc_readbyte(). */ + +static void qc_reset(struct qcam_device *q) +{ + switch (q->port_mode & QC_FORCE_MASK) + { + case QC_FORCE_UNIDIR: + q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR; + break; + + case QC_FORCE_BIDIR: + q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR; + break; + + case QC_ANY: + write_lpcontrol(q, 0x20); + write_lpdata(q, 0x75); + + if (read_lpdata(q) != 0x75) { + q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR; + } else { + q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR; + } + break; + } + + write_lpcontrol(q, 0xb); + udelay(250); + write_lpcontrol(q, 0xe); + qc_setscanmode(q); /* in case port_mode changed */ +} + + +/* Decide which scan mode to use. There's no real requirement that + * the scanmode match the resolution in q->height and q-> width -- the + * camera takes the picture at the resolution specified in the + * "scanmode" and then returns the image at the resolution specified + * with the resolution commands. If the scan is bigger than the + * requested resolution, the upper-left hand corner of the scan is + * returned. If the scan is smaller, then the rest of the image + * returned contains garbage. */ + +static int qc_setscanmode(struct qcam_device *q) +{ + int old_mode = q->mode; + + switch (q->transfer_scale) + { + case 1: + q->mode = 0; + break; + case 2: + q->mode = 4; + break; + case 4: + q->mode = 8; + break; + } + + switch (q->bpp) + { + case 4: + break; + case 6: + q->mode += 2; + break; + } + + switch (q->port_mode & QC_MODE_MASK) + { + case QC_BIDIR: + q->mode += 1; + break; + case QC_NOTSET: + case QC_UNIDIR: + break; + } + + if (q->mode != old_mode) + q->status |= QC_PARAM_CHANGE; + + return 0; +} + + +/* Reset the QuickCam and program for brightness, contrast, + * white-balance, and resolution. */ + +static void qc_set(struct qcam_device *q) +{ + int val; + int val2; + + qc_reset(q); + + /* Set the brightness. Yes, this is repetitive, but it works. + * Shorter versions seem to fail subtly. Feel free to try :-). */ + /* I think the problem was in qc_command, not here -- bls */ + + qc_command(q, 0xb); + qc_command(q, q->brightness); + + val = q->height / q->transfer_scale; + qc_command(q, 0x11); + qc_command(q, val); + if ((q->port_mode & QC_MODE_MASK) == QC_UNIDIR && q->bpp == 6) { + /* The normal "transfers per line" calculation doesn't seem to work + as expected here (and yet it works fine in qc_scan). No idea + why this case is the odd man out. Fortunately, Laird's original + working version gives me a good way to guess at working values. + -- bls */ + val = q->width; + val2 = q->transfer_scale * 4; + } else { + val = q->width * q->bpp; + val2 = (((q->port_mode & QC_MODE_MASK) == QC_BIDIR) ? 24 : 8) * + q->transfer_scale; + } + val = (val + val2 - 1) / val2; + qc_command(q, 0x13); + qc_command(q, val); + + /* Setting top and left -- bls */ + qc_command(q, 0xd); + qc_command(q, q->top); + qc_command(q, 0xf); + qc_command(q, q->left / 2); + + qc_command(q, 0x19); + qc_command(q, q->contrast); + qc_command(q, 0x1f); + qc_command(q, q->whitebal); + + /* Clear flag that we must update the grabbing parameters on the camera + before we grab the next frame */ + q->status &= (~QC_PARAM_CHANGE); +} + +/* Qc_readbytes reads some bytes from the QC and puts them in + the supplied buffer. It returns the number of bytes read, + or -1 on error. */ + +static inline int qc_readbytes(struct qcam_device *q, char buffer[]) +{ + int ret=1; + unsigned int hi, lo; + unsigned int hi2, lo2; + static int state = 0; + + if (buffer == NULL) + { + state = 0; + return 0; + } + + switch (q->port_mode & QC_MODE_MASK) + { + case QC_BIDIR: /* Bi-directional Port */ + write_lpcontrol(q, 0x26); + lo = (qc_waithand2(q, 1) >> 1); + hi = (read_lpstatus(q) >> 3) & 0x1f; + write_lpcontrol(q, 0x2e); + lo2 = (qc_waithand2(q, 0) >> 1); + hi2 = (read_lpstatus(q) >> 3) & 0x1f; + switch (q->bpp) + { + case 4: + buffer[0] = lo & 0xf; + buffer[1] = ((lo & 0x70) >> 4) | ((hi & 1) << 3); + buffer[2] = (hi & 0x1e) >> 1; + buffer[3] = lo2 & 0xf; + buffer[4] = ((lo2 & 0x70) >> 4) | ((hi2 & 1) << 3); + buffer[5] = (hi2 & 0x1e) >> 1; + ret = 6; + break; + case 6: + buffer[0] = lo & 0x3f; + buffer[1] = ((lo & 0x40) >> 6) | (hi << 1); + buffer[2] = lo2 & 0x3f; + buffer[3] = ((lo2 & 0x40) >> 6) | (hi2 << 1); + ret = 4; + break; + } + break; + + case QC_UNIDIR: /* Unidirectional Port */ + write_lpcontrol(q, 6); + lo = (qc_waithand(q, 1) & 0xf0) >> 4; + write_lpcontrol(q, 0xe); + hi = (qc_waithand(q, 0) & 0xf0) >> 4; + + switch (q->bpp) + { + case 4: + buffer[0] = lo; + buffer[1] = hi; + ret = 2; + break; + case 6: + switch (state) + { + case 0: + buffer[0] = (lo << 2) | ((hi & 0xc) >> 2); + q->saved_bits = (hi & 3) << 4; + state = 1; + ret = 1; + break; + case 1: + buffer[0] = lo | q->saved_bits; + q->saved_bits = hi << 2; + state = 2; + ret = 1; + break; + case 2: + buffer[0] = ((lo & 0xc) >> 2) | q->saved_bits; + buffer[1] = ((lo & 3) << 4) | hi; + state = 0; + ret = 2; + break; + } + break; + } + break; + } + return ret; +} + +/* requests a scan from the camera. It sends the correct instructions + * to the camera and then reads back the correct number of bytes. In + * previous versions of this routine the return structure contained + * the raw output from the camera, and there was a 'qc_convertscan' + * function that converted that to a useful format. In version 0.3 I + * rolled qc_convertscan into qc_scan and now I only return the + * converted scan. The format is just an one-dimensional array of + * characters, one for each pixel, with 0=black up to n=white, where + * n=2^(bit depth)-1. Ask me for more details if you don't understand + * this. */ + +static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long len) +{ + int i, j, k, yield; + int bytes; + int linestotrans, transperline; + int divisor; + int pixels_per_line; + int pixels_read = 0; + int got=0; + char buffer[6]; + int shift=8-q->bpp; + char invert; + + if (q->mode == -1) + return -ENXIO; + + qc_command(q, 0x7); + qc_command(q, q->mode); + + if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) + { + write_lpcontrol(q, 0x2e); /* turn port around */ + write_lpcontrol(q, 0x26); + (void) qc_waithand(q, 1); + write_lpcontrol(q, 0x2e); + (void) qc_waithand(q, 0); + } + + /* strange -- should be 15:63 below, but 4bpp is odd */ + invert = (q->bpp == 4) ? 16 : 63; + + linestotrans = q->height / q->transfer_scale; + pixels_per_line = q->width / q->transfer_scale; + transperline = q->width * q->bpp; + divisor = (((q->port_mode & QC_MODE_MASK) == QC_BIDIR) ? 24 : 8) * + q->transfer_scale; + transperline = (transperline + divisor - 1) / divisor; + + for (i = 0, yield = yieldlines; i < linestotrans; i++) + { + for (pixels_read = j = 0; j < transperline; j++) + { + bytes = qc_readbytes(q, buffer); + for (k = 0; k < bytes && (pixels_read + k) < pixels_per_line; k++) + { + int o; + if (buffer[k] == 0 && invert == 16) + { + /* 4bpp is odd (again) -- inverter is 16, not 15, but output + must be 0-15 -- bls */ + buffer[k] = 16; + } + o=i*pixels_per_line + pixels_read + k; + if(o<len) + { + got++; + put_user((invert - buffer[k])<<shift, buf+o); + } + } + pixels_read += bytes; + } + (void) qc_readbytes(q, NULL); /* reset state machine */ + + /* Grabbing an entire frame from the quickcam is a lengthy + process. We don't (usually) want to busy-block the + processor for the entire frame. yieldlines is a module + parameter. If we yield every line, the minimum frame + time will be 240 / 200 = 1.2 seconds. The compile-time + default is to yield every 4 lines. */ + if (i >= yield) { + msleep_interruptible(5); + yield = i + yieldlines; + } + } + + if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) + { + write_lpcontrol(q, 2); + write_lpcontrol(q, 6); + udelay(3); + write_lpcontrol(q, 0xe); + } + if(got<len) + return got; + return len; +} + +/* + * Video4linux interfacing + */ + +static int qcam_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct video_device *dev = video_devdata(file); + struct qcam_device *qcam=(struct qcam_device *)dev; + + switch(cmd) + { + case VIDIOCGCAP: + { + struct video_capability *b = arg; + strcpy(b->name, "Quickcam"); + b->type = VID_TYPE_CAPTURE|VID_TYPE_SCALES|VID_TYPE_MONOCHROME; + b->channels = 1; + b->audios = 0; + b->maxwidth = 320; + b->maxheight = 240; + b->minwidth = 80; + b->minheight = 60; + return 0; + } + case VIDIOCGCHAN: + { + struct video_channel *v = arg; + if(v->channel!=0) + return -EINVAL; + v->flags=0; + v->tuners=0; + /* Good question.. its composite or SVHS so.. */ + v->type = VIDEO_TYPE_CAMERA; + strcpy(v->name, "Camera"); + return 0; + } + case VIDIOCSCHAN: + { + struct video_channel *v = arg; + if(v->channel!=0) + return -EINVAL; + return 0; + } + case VIDIOCGTUNER: + { + struct video_tuner *v = arg; + if(v->tuner) + return -EINVAL; + strcpy(v->name, "Format"); + v->rangelow=0; + v->rangehigh=0; + v->flags= 0; + v->mode = VIDEO_MODE_AUTO; + return 0; + } + case VIDIOCSTUNER: + { + struct video_tuner *v = arg; + if(v->tuner) + return -EINVAL; + if(v->mode!=VIDEO_MODE_AUTO) + return -EINVAL; + return 0; + } + case VIDIOCGPICT: + { + struct video_picture *p = arg; + p->colour=0x8000; + p->hue=0x8000; + p->brightness=qcam->brightness<<8; + p->contrast=qcam->contrast<<8; + p->whiteness=qcam->whitebal<<8; + p->depth=qcam->bpp; + p->palette=VIDEO_PALETTE_GREY; + return 0; + } + case VIDIOCSPICT: + { + struct video_picture *p = arg; + if(p->palette!=VIDEO_PALETTE_GREY) + return -EINVAL; + if(p->depth!=4 && p->depth!=6) + return -EINVAL; + + /* + * Now load the camera. + */ + + qcam->brightness = p->brightness>>8; + qcam->contrast = p->contrast>>8; + qcam->whitebal = p->whiteness>>8; + qcam->bpp = p->depth; + + down(&qcam->lock); + qc_setscanmode(qcam); + up(&qcam->lock); + qcam->status |= QC_PARAM_CHANGE; + + return 0; + } + case VIDIOCSWIN: + { + struct video_window *vw = arg; + if(vw->flags) + return -EINVAL; + if(vw->clipcount) + return -EINVAL; + if(vw->height<60||vw->height>240) + return -EINVAL; + if(vw->width<80||vw->width>320) + return -EINVAL; + + qcam->width = 320; + qcam->height = 240; + qcam->transfer_scale = 4; + + if(vw->width>=160 && vw->height>=120) + { + qcam->transfer_scale = 2; + } + if(vw->width>=320 && vw->height>=240) + { + qcam->width = 320; + qcam->height = 240; + qcam->transfer_scale = 1; + } + down(&qcam->lock); + qc_setscanmode(qcam); + up(&qcam->lock); + + /* We must update the camera before we grab. We could + just have changed the grab size */ + qcam->status |= QC_PARAM_CHANGE; + + /* Ok we figured out what to use from our wide choice */ + return 0; + } + case VIDIOCGWIN: + { + struct video_window *vw = arg; + memset(vw, 0, sizeof(*vw)); + vw->width=qcam->width/qcam->transfer_scale; + vw->height=qcam->height/qcam->transfer_scale; + return 0; + } + case VIDIOCKEY: + return 0; + case VIDIOCCAPTURE: + case VIDIOCGFBUF: + case VIDIOCSFBUF: + case VIDIOCGFREQ: + case VIDIOCSFREQ: + case VIDIOCGAUDIO: + case VIDIOCSAUDIO: + return -EINVAL; + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static int qcam_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, qcam_do_ioctl); +} + +static ssize_t qcam_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct video_device *v = video_devdata(file); + struct qcam_device *qcam=(struct qcam_device *)v; + int len; + parport_claim_or_block(qcam->pdev); + + down(&qcam->lock); + + qc_reset(qcam); + + /* Update the camera parameters if we need to */ + if (qcam->status & QC_PARAM_CHANGE) + qc_set(qcam); + + len=qc_capture(qcam, buf,count); + + up(&qcam->lock); + + parport_release(qcam->pdev); + return len; +} + +static struct file_operations qcam_fops = { + .owner = THIS_MODULE, + .open = video_exclusive_open, + .release = video_exclusive_release, + .ioctl = qcam_ioctl, + .read = qcam_read, + .llseek = no_llseek, +}; +static struct video_device qcam_template= +{ + .owner = THIS_MODULE, + .name = "Connectix Quickcam", + .type = VID_TYPE_CAPTURE, + .hardware = VID_HARDWARE_QCAM_BW, + .fops = &qcam_fops, +}; + +#define MAX_CAMS 4 +static struct qcam_device *qcams[MAX_CAMS]; +static unsigned int num_cams = 0; + +static int init_bwqcam(struct parport *port) +{ + struct qcam_device *qcam; + + if (num_cams == MAX_CAMS) + { + printk(KERN_ERR "Too many Quickcams (max %d)\n", MAX_CAMS); + return -ENOSPC; + } + + qcam=qcam_init(port); + if(qcam==NULL) + return -ENODEV; + + parport_claim_or_block(qcam->pdev); + + qc_reset(qcam); + + if(qc_detect(qcam)==0) + { + parport_release(qcam->pdev); + parport_unregister_device(qcam->pdev); + kfree(qcam); + return -ENODEV; + } + qc_calibrate(qcam); + + parport_release(qcam->pdev); + + printk(KERN_INFO "Connectix Quickcam on %s\n", qcam->pport->name); + + if(video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1) + { + parport_unregister_device(qcam->pdev); + kfree(qcam); + return -ENODEV; + } + + qcams[num_cams++] = qcam; + + return 0; +} + +static void close_bwqcam(struct qcam_device *qcam) +{ + video_unregister_device(&qcam->vdev); + parport_unregister_device(qcam->pdev); + kfree(qcam); +} + +/* The parport parameter controls which parports will be scanned. + * Scanning all parports causes some printers to print a garbage page. + * -- March 14, 1999 Billy Donahue <billy@escape.com> */ +#ifdef MODULE +static char *parport[MAX_CAMS] = { NULL, }; +module_param_array(parport, charp, NULL, 0); +#endif + +static int accept_bwqcam(struct parport *port) +{ +#ifdef MODULE + int n; + + if (parport[0] && strncmp(parport[0], "auto", 4) != 0) { + /* user gave parport parameters */ + for(n=0; parport[n] && n<MAX_CAMS; n++){ + char *ep; + unsigned long r; + r = simple_strtoul(parport[n], &ep, 0); + if (ep == parport[n]) { + printk(KERN_ERR + "bw-qcam: bad port specifier \"%s\"\n", + parport[n]); + continue; + } + if (r == port->number) + return 1; + } + return 0; + } +#endif + return 1; +} + +static void bwqcam_attach(struct parport *port) +{ + if (accept_bwqcam(port)) + init_bwqcam(port); +} + +static void bwqcam_detach(struct parport *port) +{ + int i; + for (i = 0; i < num_cams; i++) { + struct qcam_device *qcam = qcams[i]; + if (qcam && qcam->pdev->port == port) { + qcams[i] = NULL; + close_bwqcam(qcam); + } + } +} + +static struct parport_driver bwqcam_driver = { + .name = "bw-qcam", + .attach = bwqcam_attach, + .detach = bwqcam_detach, +}; + +static void __exit exit_bw_qcams(void) +{ + parport_unregister_driver(&bwqcam_driver); +} + +static int __init init_bw_qcams(void) +{ +#ifdef MODULE + /* Do some sanity checks on the module parameters. */ + if (maxpoll > 5000) { + printk("Connectix Quickcam max-poll was above 5000. Using 5000.\n"); + maxpoll = 5000; + } + + if (yieldlines < 1) { + printk("Connectix Quickcam yieldlines was less than 1. Using 1.\n"); + yieldlines = 1; + } +#endif + return parport_register_driver(&bwqcam_driver); +} + +module_init(init_bw_qcams); +module_exit(exit_bw_qcams); + +MODULE_LICENSE("GPL"); |