Merge tag 'fixes-for-v4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v4.15-rc4

We have a few fixes on dwc3:

- one fix which only happens with some implementations where we need to
  wait longer for some commands to finish.

- Another fix for high-bandwidth isochronous endpoint programming making
  sure that we send the correct DATA tokens in the correct sequence

- A couple PM fixes on dwc3-of-simple

The other synopsys controller driver (dwc2) got a fix for FIFO size
programming.

Other than these, we have a couple Kconfig fixes making sure that
dependencies are properly setup.

1 files changed, 36 insertions, 4 deletions

diff --git a/drivers/media/rc/sir_ir.c b/drivers/media/rc/sir_ir.c
index 76120664b700..9ee2c9196b4d 100644
--- a/drivers/media/rc/sir_ir.c
+++ b/drivers/media/rc/sir_ir.c
@@ -57,7 +57,7 @@ static void add_read_queue(int flag, unsigned long val);
 static irqreturn_t sir_interrupt(int irq, void *dev_id);
 static void send_space(unsigned long len);
 static void send_pulse(unsigned long len);
-static void init_hardware(void);
+static int init_hardware(void);
 static void drop_hardware(void);
 /* Initialisation */
 
@@ -263,11 +263,36 @@ static void send_pulse(unsigned long len)
 	}
 }
 
-static void init_hardware(void)
+static int init_hardware(void)
 {
+	u8 scratch, scratch2, scratch3;
 	unsigned long flags;
 
 	spin_lock_irqsave(&hardware_lock, flags);
+
+	/*
+	 * This is a simple port existence test, borrowed from the autoconfig
+	 * function in drivers/tty/serial/8250/8250_port.c
+	 */
+	scratch = sinp(UART_IER);
+	soutp(UART_IER, 0);
+#ifdef __i386__
+	outb(0xff, 0x080);
+#endif
+	scratch2 = sinp(UART_IER) & 0x0f;
+	soutp(UART_IER, 0x0f);
+#ifdef __i386__
+	outb(0x00, 0x080);
+#endif
+	scratch3 = sinp(UART_IER) & 0x0f;
+	soutp(UART_IER, scratch);
+	if (scratch2 != 0 || scratch3 != 0x0f) {
+		/* we fail, there's nothing here */
+		spin_unlock_irqrestore(&hardware_lock, flags);
+		pr_err("port existence test failed, cannot continue\n");
+		return -ENODEV;
+	}
+
 	/* reset UART */
 	outb(0, io + UART_MCR);
 	outb(0, io + UART_IER);
@@ -285,6 +310,8 @@ static void init_hardware(void)
 	/* turn on UART */
 	outb(UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2, io + UART_MCR);
 	spin_unlock_irqrestore(&hardware_lock, flags);
+
+	return 0;
 }
 
 static void drop_hardware(void)
@@ -334,14 +361,19 @@ static int sir_ir_probe(struct platform_device *dev)
 		pr_err("IRQ %d already in use.\n", irq);
 		return retval;
 	}
+
+	retval = init_hardware();
+	if (retval) {
+		del_timer_sync(&timerlist);
+		return retval;
+	}
+
 	pr_info("I/O port 0x%.4x, IRQ %d.\n", io, irq);
 
 	retval = devm_rc_register_device(&sir_ir_dev->dev, rcdev);
 	if (retval < 0)
 		return retval;
 
-	init_hardware();
-
 	return 0;
 }