[media] s5p-fimc: Change the driver directory name to exynos4-is

The s5p-fimc directory now contains drivers for multiple IP blocks
found in multiple Samsung application processors. This includes FIMC
(CAMIF), MIPI CSIS and FIMC LITE. FIMC-IS (Imaging Subsystem) driver
is going to be put into same directory. Hence we rename it to
exynos4-is as s5p-fimc was only relevant for early version of this
driver, when it only supported FIMC IP block.

The imaging subsystem drivers for Exynos4 SoC series and S5PV210 will
be included in drivers/media/platform/exynos4-is directory, with some
modules shared with exynos5 series, while the rest of exynos5 specific
modules will find their home in drivers/media/platform/exynos5-is.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 302 insertions, 0 deletions

diff --git a/drivers/media/platform/exynos4-is/fimc-lite-reg.c b/drivers/media/platform/exynos4-is/fimc-lite-reg.c
new file mode 100644
index 000000000000..f0af0754a7b4
--- /dev/null
+++ b/drivers/media/platform/exynos4-is/fimc-lite-reg.c
@@ -0,0 +1,302 @@
+/*
+ * Register interface file for EXYNOS FIMC-LITE (camera interface) driver
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <media/s5p_fimc.h>
+
+#include "fimc-lite-reg.h"
+#include "fimc-lite.h"
+#include "fimc-core.h"
+
+#define FLITE_RESET_TIMEOUT 50 /* in ms */
+
+void flite_hw_reset(struct fimc_lite *dev)
+{
+	unsigned long end = jiffies + msecs_to_jiffies(FLITE_RESET_TIMEOUT);
+	u32 cfg;
+
+	cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+	cfg |= FLITE_REG_CIGCTRL_SWRST_REQ;
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+	while (time_is_after_jiffies(end)) {
+		cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+		if (cfg & FLITE_REG_CIGCTRL_SWRST_RDY)
+			break;
+		usleep_range(1000, 5000);
+	}
+
+	cfg |= FLITE_REG_CIGCTRL_SWRST;
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+}
+
+void flite_hw_clear_pending_irq(struct fimc_lite *dev)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS);
+	cfg &= ~FLITE_REG_CISTATUS_IRQ_CAM;
+	writel(cfg, dev->regs + FLITE_REG_CISTATUS);
+}
+
+u32 flite_hw_get_interrupt_source(struct fimc_lite *dev)
+{
+	u32 intsrc = readl(dev->regs + FLITE_REG_CISTATUS);
+	return intsrc & FLITE_REG_CISTATUS_IRQ_MASK;
+}
+
+void flite_hw_clear_last_capture_end(struct fimc_lite *dev)
+{
+
+	u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS2);
+	cfg &= ~FLITE_REG_CISTATUS2_LASTCAPEND;
+	writel(cfg, dev->regs + FLITE_REG_CISTATUS2);
+}
+
+void flite_hw_set_interrupt_mask(struct fimc_lite *dev)
+{
+	u32 cfg, intsrc;
+
+	/* Select interrupts to be enabled for each output mode */
+	if (atomic_read(&dev->out_path) == FIMC_IO_DMA) {
+		intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN |
+			 FLITE_REG_CIGCTRL_IRQ_LASTEN |
+			 FLITE_REG_CIGCTRL_IRQ_STARTEN;
+	} else {
+		/* An output to the FIMC-IS */
+		intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN |
+			 FLITE_REG_CIGCTRL_IRQ_LASTEN;
+	}
+
+	cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+	cfg |= FLITE_REG_CIGCTRL_IRQ_DISABLE_MASK;
+	cfg &= ~intsrc;
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+}
+
+void flite_hw_capture_start(struct fimc_lite *dev)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT);
+	cfg |= FLITE_REG_CIIMGCPT_IMGCPTEN;
+	writel(cfg, dev->regs + FLITE_REG_CIIMGCPT);
+}
+
+void flite_hw_capture_stop(struct fimc_lite *dev)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT);
+	cfg &= ~FLITE_REG_CIIMGCPT_IMGCPTEN;
+	writel(cfg, dev->regs + FLITE_REG_CIIMGCPT);
+}
+
+/*
+ * Test pattern (color bars) enable/disable. External sensor
+ * pixel clock must be active for the test pattern to work.
+ */
+void flite_hw_set_test_pattern(struct fimc_lite *dev, bool on)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+	if (on)
+		cfg |= FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR;
+	else
+		cfg &= ~FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR;
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+}
+
+static const u32 src_pixfmt_map[8][3] = {
+	{ V4L2_MBUS_FMT_YUYV8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCBYCR,
+	  FLITE_REG_CIGCTRL_YUV422_1P },
+	{ V4L2_MBUS_FMT_YVYU8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCRYCB,
+	  FLITE_REG_CIGCTRL_YUV422_1P },
+	{ V4L2_MBUS_FMT_UYVY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CBYCRY,
+	  FLITE_REG_CIGCTRL_YUV422_1P },
+	{ V4L2_MBUS_FMT_VYUY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CRYCBY,
+	  FLITE_REG_CIGCTRL_YUV422_1P },
+	{ V4L2_MBUS_FMT_SGRBG8_1X8, 0, FLITE_REG_CIGCTRL_RAW8 },
+	{ V4L2_MBUS_FMT_SGRBG10_1X10, 0, FLITE_REG_CIGCTRL_RAW10 },
+	{ V4L2_MBUS_FMT_SGRBG12_1X12, 0, FLITE_REG_CIGCTRL_RAW12 },
+	{ V4L2_MBUS_FMT_JPEG_1X8, 0, FLITE_REG_CIGCTRL_USER(1) },
+};
+
+/* Set camera input pixel format and resolution */
+void flite_hw_set_source_format(struct fimc_lite *dev, struct flite_frame *f)
+{
+	enum v4l2_mbus_pixelcode pixelcode = dev->fmt->mbus_code;
+	unsigned int i = ARRAY_SIZE(src_pixfmt_map);
+	u32 cfg;
+
+	while (i-- >= 0) {
+		if (src_pixfmt_map[i][0] == pixelcode)
+			break;
+	}
+
+	if (i == 0 && src_pixfmt_map[i][0] != pixelcode) {
+		v4l2_err(&dev->vfd,
+			 "Unsupported pixel code, falling back to %#08x\n",
+			 src_pixfmt_map[i][0]);
+	}
+
+	cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+	cfg &= ~FLITE_REG_CIGCTRL_FMT_MASK;
+	cfg |= src_pixfmt_map[i][2];
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+	cfg = readl(dev->regs + FLITE_REG_CISRCSIZE);
+	cfg &= ~(FLITE_REG_CISRCSIZE_ORDER422_MASK |
+		 FLITE_REG_CISRCSIZE_SIZE_CAM_MASK);
+	cfg |= (f->f_width << 16) | f->f_height;
+	cfg |= src_pixfmt_map[i][1];
+	writel(cfg, dev->regs + FLITE_REG_CISRCSIZE);
+}
+
+/* Set the camera host input window offsets (cropping) */
+void flite_hw_set_window_offset(struct fimc_lite *dev, struct flite_frame *f)
+{
+	u32 hoff2, voff2;
+	u32 cfg;
+
+	cfg = readl(dev->regs + FLITE_REG_CIWDOFST);
+	cfg &= ~FLITE_REG_CIWDOFST_OFST_MASK;
+	cfg |= (f->rect.left << 16) | f->rect.top;
+	cfg |= FLITE_REG_CIWDOFST_WINOFSEN;
+	writel(cfg, dev->regs + FLITE_REG_CIWDOFST);
+
+	hoff2 = f->f_width - f->rect.width - f->rect.left;
+	voff2 = f->f_height - f->rect.height - f->rect.top;
+
+	cfg = (hoff2 << 16) | voff2;
+	writel(cfg, dev->regs + FLITE_REG_CIWDOFST2);
+}
+
+/* Select camera port (A, B) */
+static void flite_hw_set_camera_port(struct fimc_lite *dev, int id)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIGENERAL);
+	if (id == 0)
+		cfg &= ~FLITE_REG_CIGENERAL_CAM_B;
+	else
+		cfg |= FLITE_REG_CIGENERAL_CAM_B;
+	writel(cfg, dev->regs + FLITE_REG_CIGENERAL);
+}
+
+/* Select serial or parallel bus, camera port (A,B) and set signals polarity */
+void flite_hw_set_camera_bus(struct fimc_lite *dev,
+			     struct fimc_source_info *si)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+	unsigned int flags = si->flags;
+
+	if (si->sensor_bus_type != FIMC_BUS_TYPE_MIPI_CSI2) {
+		cfg &= ~(FLITE_REG_CIGCTRL_SELCAM_MIPI |
+			 FLITE_REG_CIGCTRL_INVPOLPCLK |
+			 FLITE_REG_CIGCTRL_INVPOLVSYNC |
+			 FLITE_REG_CIGCTRL_INVPOLHREF);
+
+		if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
+			cfg |= FLITE_REG_CIGCTRL_INVPOLPCLK;
+
+		if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
+			cfg |= FLITE_REG_CIGCTRL_INVPOLVSYNC;
+
+		if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+			cfg |= FLITE_REG_CIGCTRL_INVPOLHREF;
+	} else {
+		cfg |= FLITE_REG_CIGCTRL_SELCAM_MIPI;
+	}
+
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+	flite_hw_set_camera_port(dev, si->mux_id);
+}
+
+static void flite_hw_set_out_order(struct fimc_lite *dev, struct flite_frame *f)
+{
+	static const u32 pixcode[4][2] = {
+		{ V4L2_MBUS_FMT_YUYV8_2X8, FLITE_REG_CIODMAFMT_YCBYCR },
+		{ V4L2_MBUS_FMT_YVYU8_2X8, FLITE_REG_CIODMAFMT_YCRYCB },
+		{ V4L2_MBUS_FMT_UYVY8_2X8, FLITE_REG_CIODMAFMT_CBYCRY },
+		{ V4L2_MBUS_FMT_VYUY8_2X8, FLITE_REG_CIODMAFMT_CRYCBY },
+	};
+	u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT);
+	unsigned int i = ARRAY_SIZE(pixcode);
+
+	while (i-- >= 0)
+		if (pixcode[i][0] == dev->fmt->mbus_code)
+			break;
+	cfg &= ~FLITE_REG_CIODMAFMT_YCBCR_ORDER_MASK;
+	writel(cfg | pixcode[i][1], dev->regs + FLITE_REG_CIODMAFMT);
+}
+
+void flite_hw_set_dma_window(struct fimc_lite *dev, struct flite_frame *f)
+{
+	u32 cfg;
+
+	/* Maximum output pixel size */
+	cfg = readl(dev->regs + FLITE_REG_CIOCAN);
+	cfg &= ~FLITE_REG_CIOCAN_MASK;
+	cfg = (f->f_height << 16) | f->f_width;
+	writel(cfg, dev->regs + FLITE_REG_CIOCAN);
+
+	/* DMA offsets */
+	cfg = readl(dev->regs + FLITE_REG_CIOOFF);
+	cfg &= ~FLITE_REG_CIOOFF_MASK;
+	cfg |= (f->rect.top << 16) | f->rect.left;
+	writel(cfg, dev->regs + FLITE_REG_CIOOFF);
+}
+
+/* Enable/disable output DMA, set output pixel size and offsets (composition) */
+void flite_hw_set_output_dma(struct fimc_lite *dev, struct flite_frame *f,
+			     bool enable)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+
+	if (!enable) {
+		cfg |= FLITE_REG_CIGCTRL_ODMA_DISABLE;
+		writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+		return;
+	}
+
+	cfg &= ~FLITE_REG_CIGCTRL_ODMA_DISABLE;
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+	flite_hw_set_out_order(dev, f);
+	flite_hw_set_dma_window(dev, f);
+}
+
+void flite_hw_dump_regs(struct fimc_lite *dev, const char *label)
+{
+	struct {
+		u32 offset;
+		const char * const name;
+	} registers[] = {
+		{ 0x00, "CISRCSIZE" },
+		{ 0x04, "CIGCTRL" },
+		{ 0x08, "CIIMGCPT" },
+		{ 0x0c, "CICPTSEQ" },
+		{ 0x10, "CIWDOFST" },
+		{ 0x14, "CIWDOFST2" },
+		{ 0x18, "CIODMAFMT" },
+		{ 0x20, "CIOCAN" },
+		{ 0x24, "CIOOFF" },
+		{ 0x30, "CIOSA" },
+		{ 0x40, "CISTATUS" },
+		{ 0x44, "CISTATUS2" },
+		{ 0xf0, "CITHOLD" },
+		{ 0xfc, "CIGENERAL" },
+	};
+	u32 i;
+
+	v4l2_info(&dev->subdev, "--- %s ---\n", label);
+
+	for (i = 0; i < ARRAY_SIZE(registers); i++) {
+		u32 cfg = readl(dev->regs + registers[i].offset);
+		v4l2_info(&dev->subdev, "%9s: 0x%08x\n",
+			  registers[i].name, cfg);
+	}
+}