[media] exynos4-is: Add Exynos5250 SoC support to fimc-lite driver

This patch adds support for the Exynos5250 SoC variant of the FIMC-LITE
IP. A 'compatible' string is added for Exynos5250 compatible devices
and the capture DMA handling is reworked to use the FLITE_REG_CIFCNTSEQ
register, masking output DMA buffer address slots. The frame interrupt
is enabled so there are now 2 interrupts per frame. This likely can be
optimized in future by using any status registers that allow to figure
out what the last and the currently written frame buffer is. It would
also be more reliable in cases where there are high interrupt service
latencies.

Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 50 insertions, 3 deletions

diff --git a/drivers/media/platform/exynos4-is/fimc-lite-reg.c b/drivers/media/platform/exynos4-is/fimc-lite-reg.c
index eb4f7635f5e0..72a343e3b5e8 100644
--- a/drivers/media/platform/exynos4-is/fimc-lite-reg.c
+++ b/drivers/media/platform/exynos4-is/fimc-lite-reg.c
@@ -2,15 +2,16 @@
  * Register interface file for EXYNOS FIMC-LITE (camera interface) driver
  *
  * Copyright (C) 2012 Samsung Electronics Co., Ltd.
- * Sylwester Nawrocki <s.nawrocki@samsung.com>
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-#include <linux/io.h>
+#include <linux/bitops.h>
 #include <linux/delay.h>
+#include <linux/io.h>
 #include <media/s5p_fimc.h>
 
 #include "fimc-lite-reg.h"
@@ -68,7 +69,8 @@ void flite_hw_set_interrupt_mask(struct fimc_lite *dev)
 	if (atomic_read(&dev->out_path) == FIMC_IO_DMA) {
 		intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN |
 			 FLITE_REG_CIGCTRL_IRQ_LASTEN |
-			 FLITE_REG_CIGCTRL_IRQ_STARTEN;
+			 FLITE_REG_CIGCTRL_IRQ_STARTEN |
+			 FLITE_REG_CIGCTRL_IRQ_ENDEN;
 	} else {
 		/* An output to the FIMC-IS */
 		intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN |
@@ -215,6 +217,18 @@ void flite_hw_set_camera_bus(struct fimc_lite *dev,
 	flite_hw_set_camera_port(dev, si->mux_id);
 }
 
+static void flite_hw_set_pack12(struct fimc_lite *dev, int on)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT);
+
+	cfg &= ~FLITE_REG_CIODMAFMT_PACK12;
+
+	if (on)
+		cfg |= FLITE_REG_CIODMAFMT_PACK12;
+
+	writel(cfg, dev->regs + FLITE_REG_CIODMAFMT);
+}
+
 static void flite_hw_set_out_order(struct fimc_lite *dev, struct flite_frame *f)
 {
 	static const u32 pixcode[4][2] = {
@@ -250,6 +264,38 @@ void flite_hw_set_dma_window(struct fimc_lite *dev, struct flite_frame *f)
 	writel(cfg, dev->regs + FLITE_REG_CIOOFF);
 }
 
+void flite_hw_set_dma_buffer(struct fimc_lite *dev, struct flite_buffer *buf)
+{
+	unsigned int index;
+	u32 cfg;
+
+	if (dev->dd->max_dma_bufs == 1)
+		index = 0;
+	else
+		index = buf->index;
+
+	if (index == 0)
+		writel(buf->paddr, dev->regs + FLITE_REG_CIOSA);
+	else
+		writel(buf->paddr, dev->regs + FLITE_REG_CIOSAN(index - 1));
+
+	cfg = readl(dev->regs + FLITE_REG_CIFCNTSEQ);
+	cfg |= BIT(index);
+	writel(cfg, dev->regs + FLITE_REG_CIFCNTSEQ);
+}
+
+void flite_hw_mask_dma_buffer(struct fimc_lite *dev, u32 index)
+{
+	u32 cfg;
+
+	if (dev->dd->max_dma_bufs == 1)
+		index = 0;
+
+	cfg = readl(dev->regs + FLITE_REG_CIFCNTSEQ);
+	cfg &= ~BIT(index);
+	writel(cfg, dev->regs + FLITE_REG_CIFCNTSEQ);
+}
+
 /* Enable/disable output DMA, set output pixel size and offsets (composition) */
 void flite_hw_set_output_dma(struct fimc_lite *dev, struct flite_frame *f,
 			     bool enable)
@@ -267,6 +313,7 @@ void flite_hw_set_output_dma(struct fimc_lite *dev, struct flite_frame *f,
 
 	flite_hw_set_out_order(dev, f);
 	flite_hw_set_dma_window(dev, f);
+	flite_hw_set_pack12(dev, 0);
 }
 
 void flite_hw_dump_regs(struct fimc_lite *dev, const char *label)