diff options
author | Jacopo Mondi <jacopo+renesas@jmondi.org> | 2021-01-14 18:04:29 +0100 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab+huawei@kernel.org> | 2021-02-06 09:34:31 +0100 |
commit | 85cb767cbfcd89d9949fca91bda8e7330f33e12a (patch) | |
tree | 611821acadd3c923b61b209dc9d17e7f119b3c08 /drivers/media/i2c | |
parent | 5a386b1ff7710dec76c586a3e79f862fc9fc9d73 (diff) | |
download | linux-85cb767cbfcd89d9949fca91bda8e7330f33e12a.tar.bz2 |
media: i2c: max9286: Configure reverse channel amplitude
Adjust the initial reverse channel amplitude parsing from
firmware interface the 'maxim,reverse-channel-microvolt'
property.
This change is required for both rdacm20 and rdacm21 camera
modules to be correctly probed when used in combination with
the max9286 deserializer.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Diffstat (limited to 'drivers/media/i2c')
-rw-r--r-- | drivers/media/i2c/max9286.c | 23 |
1 files changed, 22 insertions, 1 deletions
diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c index 4d7587dfb5aa..6fd4d59fcc72 100644 --- a/drivers/media/i2c/max9286.c +++ b/drivers/media/i2c/max9286.c @@ -163,6 +163,8 @@ struct max9286_priv { unsigned int mux_channel; bool mux_open; + u32 reverse_channel_mv; + struct v4l2_ctrl_handler ctrls; struct v4l2_ctrl *pixelrate; @@ -556,10 +558,14 @@ static int max9286_notify_bound(struct v4l2_async_notifier *notifier, * All enabled sources have probed and enabled their reverse control * channels: * + * - Increase the reverse channel amplitude to compensate for the + * remote ends high threshold, if not done already * - Verify all configuration links are properly detected * - Disable auto-ack as communication on the control channel are now * stable. */ + if (priv->reverse_channel_mv < 170) + max9286_reverse_channel_setup(priv, 170); max9286_check_config_link(priv, priv->source_mask); /* @@ -966,7 +972,7 @@ static int max9286_setup(struct max9286_priv *priv) * only. This should be disabled after the mux is initialised. */ max9286_configure_i2c(priv, true); - max9286_reverse_channel_setup(priv, 170); + max9286_reverse_channel_setup(priv, priv->reverse_channel_mv); /* * Enable GMSL links, mask unused ones and autodetect link @@ -1130,6 +1136,7 @@ static int max9286_parse_dt(struct max9286_priv *priv) struct device_node *i2c_mux; struct device_node *node = NULL; unsigned int i2c_mux_mask = 0; + u32 reverse_channel_microvolt; /* Balance the of_node_put() performed by of_find_node_by_name(). */ of_node_get(dev->of_node); @@ -1220,6 +1227,20 @@ static int max9286_parse_dt(struct max9286_priv *priv) } of_node_put(node); + /* + * Parse the initial value of the reverse channel amplitude from + * the firmware interface and convert it to millivolts. + * + * Default it to 170mV for backward compatibility with DTBs that do not + * provide the property. + */ + if (of_property_read_u32(dev->of_node, + "maxim,reverse-channel-microvolt", + &reverse_channel_microvolt)) + priv->reverse_channel_mv = 170; + else + priv->reverse_channel_mv = reverse_channel_microvolt / 1000U; + priv->route_mask = priv->source_mask; return 0; |