Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Some cleanups at V4L2 documentation

 - new drivers: ts2020 frontend, ov9650 sensor, s5c73m3 sensor,
   sh-mobile veu mem2mem driver, radio-ma901, davinci_vpfe staging
   driver

 - Lots of missing MAINTAINERS entries added

 - several em28xx driver improvements, including its conversion to
   videobuf2

 - several fixups on drivers to make them to better comply with the API

 - DVB core: add support for DVBv5 stats, allowing the implementation of
   statistics for new standards like ISDB

 - mb86a20s: add statistics to the driver

 - lots of new board additions, cleanups, and driver improvements.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (596 commits)
  [media] media: Add 0x3009 USB PID to ttusb2 driver (fixed diff)
  [media] rtl28xxu: Add USB IDs for Compro VideoMate U620F
  [media] em28xx: add usb id for terratec h5 rev. 3
  [media] media: rc: gpio-ir-recv: add support for device tree parsing
  [media] mceusb: move check earlier to make smatch happy
  [media] radio-si470x doc: add info about v4l2-ctl and sox+alsa
  [media] staging: media: Remove unnecessary OOM messages
  [media] sh_vou: Use vou_dev instead of vou_file wherever possible
  [media] sh_vou: Use video_drvdata()
  [media] drivers/media/platform/soc_camera/pxa_camera.c: use devm_ functions
  [media] mt9t112: mt9t111 format set up differs from mt9t112
  [media] sh-mobile-ceu-camera: fix SHARPNESS control default
  Revert "[media] fc0011: Return early, if the frequency is already tuned"
  [media] cx18/ivtv: fix regression: remove __init from a non-init function
  [media] em28xx: fix analog streaming with USB bulk transfers
  [media] stv0900: remove unnecessary null pointer check
  [media] fc0011: Return early, if the frequency is already tuned
  [media] fc0011: Add some sanity checks and cleanups
  [media] fc0011: Fix xin value clamping
  Revert "[media] [PATH,1/2] mxl5007 move reset to attach"
  ...

1 files changed, 34 insertions, 11 deletions

diff --git a/drivers/media/i2c/adv7343.c b/drivers/media/i2c/adv7343.c
index 2b5aa676a84e..9fc2b985df0e 100644
--- a/drivers/media/i2c/adv7343.c
+++ b/drivers/media/i2c/adv7343.c
@@ -43,6 +43,7 @@ MODULE_PARM_DESC(debug, "Debug level 0-1");
 struct adv7343_state {
 	struct v4l2_subdev sd;
 	struct v4l2_ctrl_handler hdl;
+	const struct adv7343_platform_data *pdata;
 	u8 reg00;
 	u8 reg01;
 	u8 reg02;
@@ -215,12 +216,23 @@ static int adv7343_setoutput(struct v4l2_subdev *sd, u32 output_type)
 	/* Enable Appropriate DAC */
 	val = state->reg00 & 0x03;
 
-	if (output_type == ADV7343_COMPOSITE_ID)
-		val |= ADV7343_COMPOSITE_POWER_VALUE;
-	else if (output_type == ADV7343_COMPONENT_ID)
-		val |= ADV7343_COMPONENT_POWER_VALUE;
+	/* configure default configuration */
+	if (!state->pdata)
+		if (output_type == ADV7343_COMPOSITE_ID)
+			val |= ADV7343_COMPOSITE_POWER_VALUE;
+		else if (output_type == ADV7343_COMPONENT_ID)
+			val |= ADV7343_COMPONENT_POWER_VALUE;
+		else
+			val |= ADV7343_SVIDEO_POWER_VALUE;
 	else
-		val |= ADV7343_SVIDEO_POWER_VALUE;
+		val = state->pdata->mode_config.sleep_mode << 0 |
+		      state->pdata->mode_config.pll_control << 1 |
+		      state->pdata->mode_config.dac_3 << 2 |
+		      state->pdata->mode_config.dac_2 << 3 |
+		      state->pdata->mode_config.dac_1 << 4 |
+		      state->pdata->mode_config.dac_6 << 5 |
+		      state->pdata->mode_config.dac_5 << 6 |
+		      state->pdata->mode_config.dac_4 << 7;
 
 	err = adv7343_write(sd, ADV7343_POWER_MODE_REG, val);
 	if (err < 0)
@@ -238,6 +250,17 @@ static int adv7343_setoutput(struct v4l2_subdev *sd, u32 output_type)
 
 	/* configure SD DAC Output 2 and SD DAC Output 1 bit to zero */
 	val = state->reg82 & (SD_DAC_1_DI & SD_DAC_2_DI);
+
+	if (state->pdata && state->pdata->sd_config.sd_dac_out1)
+		val = val | (state->pdata->sd_config.sd_dac_out1 << 1);
+	else if (state->pdata && !state->pdata->sd_config.sd_dac_out1)
+		val = val & ~(state->pdata->sd_config.sd_dac_out1 << 1);
+
+	if (state->pdata && state->pdata->sd_config.sd_dac_out2)
+		val = val | (state->pdata->sd_config.sd_dac_out2 << 2);
+	else if (state->pdata && !state->pdata->sd_config.sd_dac_out2)
+		val = val & ~(state->pdata->sd_config.sd_dac_out2 << 2);
+
 	err = adv7343_write(sd, ADV7343_SD_MODE_REG2, val);
 	if (err < 0)
 		goto setoutput_exit;
@@ -397,10 +420,14 @@ static int adv7343_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kzalloc(sizeof(struct adv7343_state), GFP_KERNEL);
+	state = devm_kzalloc(&client->dev, sizeof(struct adv7343_state),
+			     GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 
+	/* Copy board specific information here */
+	state->pdata = client->dev.platform_data;
+
 	state->reg00	= 0x80;
 	state->reg01	= 0x00;
 	state->reg02	= 0x20;
@@ -431,16 +458,13 @@ static int adv7343_probe(struct i2c_client *client,
 		int err = state->hdl.error;
 
 		v4l2_ctrl_handler_free(&state->hdl);
-		kfree(state);
 		return err;
 	}
 	v4l2_ctrl_handler_setup(&state->hdl);
 
 	err = adv7343_initialize(&state->sd);
-	if (err) {
+	if (err)
 		v4l2_ctrl_handler_free(&state->hdl);
-		kfree(state);
-	}
 	return err;
 }
 
@@ -451,7 +475,6 @@ static int adv7343_remove(struct i2c_client *client)
 
 	v4l2_device_unregister_subdev(sd);
 	v4l2_ctrl_handler_free(&state->hdl);
-	kfree(state);
 
 	return 0;
 }