diff options
| author | Jonathan Brassow <jbrassow@redhat.com> | 2011-08-02 12:32:07 +0100 |
|---|---|---|
| committer | Alasdair G Kergon <agk@redhat.com> | 2011-08-02 12:32:07 +0100 |
| commit | 46bed2b5c16bb7c82e1088d7ae75fb958c8a8c4e (patch) | |
| tree | bab932a8eec324ca470407ff54097d86a3c0e27f /drivers/md | |
| parent | c1084561bb85da3630540ebe951749a8cd8fc714 (diff) | |
| download | linux-46bed2b5c16bb7c82e1088d7ae75fb958c8a8c4e.tar.bz2 | |
dm raid: add write_mostly parameter
Add the write_mostly parameter to RAID1 dm-raid tables.
This allows the user to set the WriteMostly flag on a RAID1 device that
should normally be avoided for read I/O.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Diffstat (limited to 'drivers/md')
| -rw-r--r-- | drivers/md/dm-raid.c | 26 |
1 files changed, 25 insertions, 1 deletions
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c index a8a1915a450d..88143a0303d2 100644 --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -308,6 +308,7 @@ static int validate_region_size(struct raid_set *rs, unsigned long region_size) * [daemon_sleep <ms>] Time between bitmap daemon work to clear bits * [min_recovery_rate <kB/sec/disk>] Throttle RAID initialization * [max_recovery_rate <kB/sec/disk>] Throttle RAID initialization + * [write_mostly <idx>] Indicate a write mostly drive via index * [max_write_behind <sectors>] See '-write-behind=' (man mdadm) * [stripe_cache <sectors>] Stripe cache size for higher RAIDs * [region_size <sectors>] Defines granularity of bitmap @@ -376,7 +377,21 @@ static int parse_raid_params(struct raid_set *rs, char **argv, clear_bit(In_sync, &rs->dev[value].rdev.flags); rs->dev[value].rdev.recovery_offset = 0; rs->print_flags |= DMPF_REBUILD; + } else if (!strcasecmp(key, "write_mostly")) { + if (rs->raid_type->level != 1) { + rs->ti->error = "write_mostly option is only valid for RAID1"; + return -EINVAL; + } + if (value > rs->md.raid_disks) { + rs->ti->error = "Invalid write_mostly drive index given"; + return -EINVAL; + } + set_bit(WriteMostly, &rs->dev[value].rdev.flags); } else if (!strcasecmp(key, "max_write_behind")) { + if (rs->raid_type->level != 1) { + rs->ti->error = "max_write_behind option is only valid for RAID1"; + return -EINVAL; + } rs->print_flags |= DMPF_MAX_WRITE_BEHIND; /* @@ -621,11 +636,15 @@ static int raid_status(struct dm_target *ti, status_type_t type, break; case STATUSTYPE_TABLE: /* The string you would use to construct this array */ - for (i = 0; i < rs->md.raid_disks; i++) + for (i = 0; i < rs->md.raid_disks; i++) { if ((rs->print_flags & DMPF_REBUILD) && rs->dev[i].data_dev && !test_bit(In_sync, &rs->dev[i].rdev.flags)) raid_param_cnt += 2; /* for rebuilds */ + if (rs->dev[i].data_dev && + test_bit(WriteMostly, &rs->dev[i].rdev.flags)) + raid_param_cnt += 2; + } raid_param_cnt += (hweight64(rs->print_flags & ~DMPF_REBUILD) * 2); if (rs->print_flags & (DMPF_SYNC | DMPF_NOSYNC)) @@ -656,6 +675,11 @@ static int raid_status(struct dm_target *ti, status_type_t type, if (rs->print_flags & DMPF_MAX_RECOVERY_RATE) DMEMIT(" max_recovery_rate %d", rs->md.sync_speed_max); + for (i = 0; i < rs->md.raid_disks; i++) + if (rs->dev[i].data_dev && + test_bit(WriteMostly, &rs->dev[i].rdev.flags)) + DMEMIT(" write_mostly %u", i); + if (rs->print_flags & DMPF_MAX_WRITE_BEHIND) DMEMIT(" max_write_behind %lu", rs->md.bitmap_info.max_write_behind); |