summaryrefslogtreecommitdiffstats
path: root/drivers/md/raid5.c
diff options
context:
space:
mode:
authorNeilBrown <neilb@suse.de>2014-05-28 13:39:22 +1000
committerNeilBrown <neilb@suse.de>2014-05-29 16:59:46 +1000
commit67f455486d2ea20b2d94d6adf5b9b783d079e321 (patch)
tree320f360d77b56f03c754b29fa617d61d25d40ec4 /drivers/md/raid5.c
parentbd8839e03b8e70fbbe08bbff70d8cba95273c823 (diff)
downloadlinux-67f455486d2ea20b2d94d6adf5b9b783d079e321.tar.bz2
md/raid56: Don't perform reads to support writes until stripe is ready.
If it is found that we need to pre-read some blocks before a write can succeed, we normally set STRIPE_DELAYED and don't actually perform the read until STRIPE_PREREAD_ACTIVE subsequently gets set. However for a degraded RAID6 we currently perform the reads as soon as we see that a write is pending. This significantly hurts throughput. So: - when handle_stripe_dirtying find a block that it wants on a device that is failed, set STRIPE_DELAY, instead of doing nothing, and - when fetch_block detects that a read might be required to satisfy a write, only perform the read if STRIPE_PREREAD_ACTIVE is set, and if we would actually need to read something to complete the write. This also helps RAID5, though less often as RAID5 supports a read-modify-write cycle. For RAID5 the read is performed too early only if the write is not a full 4K aligned write (i.e. no an R5_OVERWRITE). Also clean up a couple of horrible bits of formatting. Reported-by: Patrik HornĂ­k <patrik@dsl.sk> Signed-off-by: NeilBrown <neilb@suse.de>
Diffstat (limited to 'drivers/md/raid5.c')
-rw-r--r--drivers/md/raid5.c30
1 files changed, 18 insertions, 12 deletions
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index ad1b9bea446e..c1e8607d8340 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -292,9 +292,12 @@ static void do_release_stripe(struct r5conf *conf, struct stripe_head *sh,
BUG_ON(atomic_read(&conf->active_stripes)==0);
if (test_bit(STRIPE_HANDLE, &sh->state)) {
if (test_bit(STRIPE_DELAYED, &sh->state) &&
- !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
+ !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
list_add_tail(&sh->lru, &conf->delayed_list);
- else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
+ if (atomic_read(&conf->preread_active_stripes)
+ < IO_THRESHOLD)
+ md_wakeup_thread(conf->mddev->thread);
+ } else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
sh->bm_seq - conf->seq_write > 0)
list_add_tail(&sh->lru, &conf->bitmap_list);
else {
@@ -2886,8 +2889,11 @@ static int fetch_block(struct stripe_head *sh, struct stripe_head_state *s,
(s->failed >= 1 && fdev[0]->toread) ||
(s->failed >= 2 && fdev[1]->toread) ||
(sh->raid_conf->level <= 5 && s->failed && fdev[0]->towrite &&
+ (!test_bit(R5_Insync, &dev->flags) || test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) &&
!test_bit(R5_OVERWRITE, &fdev[0]->flags)) ||
- (sh->raid_conf->level == 6 && s->failed && s->to_write))) {
+ (sh->raid_conf->level == 6 && s->failed && s->to_write &&
+ s->to_write < sh->raid_conf->raid_disks - 2 &&
+ (!test_bit(R5_Insync, &dev->flags) || test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))))) {
/* we would like to get this block, possibly by computing it,
* otherwise read it if the backing disk is insync
*/
@@ -3086,7 +3092,8 @@ static void handle_stripe_dirtying(struct r5conf *conf,
!test_bit(R5_LOCKED, &dev->flags) &&
!(test_bit(R5_UPTODATE, &dev->flags) ||
test_bit(R5_Wantcompute, &dev->flags))) {
- if (test_bit(R5_Insync, &dev->flags)) rcw++;
+ if (test_bit(R5_Insync, &dev->flags))
+ rcw++;
else
rcw += 2*disks;
}
@@ -3107,10 +3114,10 @@ static void handle_stripe_dirtying(struct r5conf *conf,
!(test_bit(R5_UPTODATE, &dev->flags) ||
test_bit(R5_Wantcompute, &dev->flags)) &&
test_bit(R5_Insync, &dev->flags)) {
- if (
- test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
- pr_debug("Read_old block "
- "%d for r-m-w\n", i);
+ if (test_bit(STRIPE_PREREAD_ACTIVE,
+ &sh->state)) {
+ pr_debug("Read_old block %d for r-m-w\n",
+ i);
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantread, &dev->flags);
s->locked++;
@@ -3133,10 +3140,9 @@ static void handle_stripe_dirtying(struct r5conf *conf,
!(test_bit(R5_UPTODATE, &dev->flags) ||
test_bit(R5_Wantcompute, &dev->flags))) {
rcw++;
- if (!test_bit(R5_Insync, &dev->flags))
- continue; /* it's a failed drive */
- if (
- test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
+ if (test_bit(R5_Insync, &dev->flags) &&
+ test_bit(STRIPE_PREREAD_ACTIVE,
+ &sh->state)) {
pr_debug("Read_old block "
"%d for Reconstruct\n", i);
set_bit(R5_LOCKED, &dev->flags);