summaryrefslogtreecommitdiffstats
path: root/drivers/lguest/x86
diff options
context:
space:
mode:
authorJes Sorensen <jes@sgi.com>2007-10-22 11:03:28 +1000
committerRusty Russell <rusty@rustcorp.com.au>2007-10-23 15:49:51 +1000
commit625efab1cd3d4da4634dfe26df6b4005385397e2 (patch)
treee08cd714edece430ae8a8aef894adfadbccc064a /drivers/lguest/x86
parent56adbe9ddc935600c64635d6a55c260a63c67e4a (diff)
downloadlinux-625efab1cd3d4da4634dfe26df6b4005385397e2.tar.bz2
Move i386 part of core.c to x86/core.c.
Separate i386 architecture specific from core.c and move it to x86/core.c and add x86/lguest.h header file to match. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Diffstat (limited to 'drivers/lguest/x86')
-rw-r--r--drivers/lguest/x86/core.c476
-rw-r--r--drivers/lguest/x86/switcher_32.S3
2 files changed, 478 insertions, 1 deletions
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
new file mode 100644
index 000000000000..e2f46b16ce31
--- /dev/null
+++ b/drivers/lguest/x86/core.c
@@ -0,0 +1,476 @@
+/*
+ * Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation.
+ * Copyright (C) 2007, Jes Sorensen <jes@sgi.com> SGI.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/start_kernel.h>
+#include <linux/string.h>
+#include <linux/console.h>
+#include <linux/screen_info.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/lguest.h>
+#include <linux/lguest_launcher.h>
+#include <linux/lguest_bus.h>
+#include <asm/paravirt.h>
+#include <asm/param.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/desc.h>
+#include <asm/setup.h>
+#include <asm/lguest.h>
+#include <asm/uaccess.h>
+#include <asm/i387.h>
+#include "../lg.h"
+
+static int cpu_had_pge;
+
+static struct {
+ unsigned long offset;
+ unsigned short segment;
+} lguest_entry;
+
+/* Offset from where switcher.S was compiled to where we've copied it */
+static unsigned long switcher_offset(void)
+{
+ return SWITCHER_ADDR - (unsigned long)start_switcher_text;
+}
+
+/* This cpu's struct lguest_pages. */
+static struct lguest_pages *lguest_pages(unsigned int cpu)
+{
+ return &(((struct lguest_pages *)
+ (SWITCHER_ADDR + SHARED_SWITCHER_PAGES*PAGE_SIZE))[cpu]);
+}
+
+static DEFINE_PER_CPU(struct lguest *, last_guest);
+
+/*S:010
+ * We are getting close to the Switcher.
+ *
+ * Remember that each CPU has two pages which are visible to the Guest when it
+ * runs on that CPU. This has to contain the state for that Guest: we copy the
+ * state in just before we run the Guest.
+ *
+ * Each Guest has "changed" flags which indicate what has changed in the Guest
+ * since it last ran. We saw this set in interrupts_and_traps.c and
+ * segments.c.
+ */
+static void copy_in_guest_info(struct lguest *lg, struct lguest_pages *pages)
+{
+ /* Copying all this data can be quite expensive. We usually run the
+ * same Guest we ran last time (and that Guest hasn't run anywhere else
+ * meanwhile). If that's not the case, we pretend everything in the
+ * Guest has changed. */
+ if (__get_cpu_var(last_guest) != lg || lg->last_pages != pages) {
+ __get_cpu_var(last_guest) = lg;
+ lg->last_pages = pages;
+ lg->changed = CHANGED_ALL;
+ }
+
+ /* These copies are pretty cheap, so we do them unconditionally: */
+ /* Save the current Host top-level page directory. */
+ pages->state.host_cr3 = __pa(current->mm->pgd);
+ /* Set up the Guest's page tables to see this CPU's pages (and no
+ * other CPU's pages). */
+ map_switcher_in_guest(lg, pages);
+ /* Set up the two "TSS" members which tell the CPU what stack to use
+ * for traps which do directly into the Guest (ie. traps at privilege
+ * level 1). */
+ pages->state.guest_tss.esp1 = lg->esp1;
+ pages->state.guest_tss.ss1 = lg->ss1;
+
+ /* Copy direct-to-Guest trap entries. */
+ if (lg->changed & CHANGED_IDT)
+ copy_traps(lg, pages->state.guest_idt, default_idt_entries);
+
+ /* Copy all GDT entries which the Guest can change. */
+ if (lg->changed & CHANGED_GDT)
+ copy_gdt(lg, pages->state.guest_gdt);
+ /* If only the TLS entries have changed, copy them. */
+ else if (lg->changed & CHANGED_GDT_TLS)
+ copy_gdt_tls(lg, pages->state.guest_gdt);
+
+ /* Mark the Guest as unchanged for next time. */
+ lg->changed = 0;
+}
+
+/* Finally: the code to actually call into the Switcher to run the Guest. */
+static void run_guest_once(struct lguest *lg, struct lguest_pages *pages)
+{
+ /* This is a dummy value we need for GCC's sake. */
+ unsigned int clobber;
+
+ /* Copy the guest-specific information into this CPU's "struct
+ * lguest_pages". */
+ copy_in_guest_info(lg, pages);
+
+ /* Set the trap number to 256 (impossible value). If we fault while
+ * switching to the Guest (bad segment registers or bug), this will
+ * cause us to abort the Guest. */
+ lg->regs->trapnum = 256;
+
+ /* Now: we push the "eflags" register on the stack, then do an "lcall".
+ * This is how we change from using the kernel code segment to using
+ * the dedicated lguest code segment, as well as jumping into the
+ * Switcher.
+ *
+ * The lcall also pushes the old code segment (KERNEL_CS) onto the
+ * stack, then the address of this call. This stack layout happens to
+ * exactly match the stack of an interrupt... */
+ asm volatile("pushf; lcall *lguest_entry"
+ /* This is how we tell GCC that %eax ("a") and %ebx ("b")
+ * are changed by this routine. The "=" means output. */
+ : "=a"(clobber), "=b"(clobber)
+ /* %eax contains the pages pointer. ("0" refers to the
+ * 0-th argument above, ie "a"). %ebx contains the
+ * physical address of the Guest's top-level page
+ * directory. */
+ : "0"(pages), "1"(__pa(lg->pgdirs[lg->pgdidx].pgdir))
+ /* We tell gcc that all these registers could change,
+ * which means we don't have to save and restore them in
+ * the Switcher. */
+ : "memory", "%edx", "%ecx", "%edi", "%esi");
+}
+/*:*/
+
+/*H:040 This is the i386-specific code to setup and run the Guest. Interrupts
+ * are disabled: we own the CPU. */
+void lguest_arch_run_guest(struct lguest *lg)
+{
+ /* Remember the awfully-named TS bit? If the Guest has asked
+ * to set it we set it now, so we can trap and pass that trap
+ * to the Guest if it uses the FPU. */
+ if (lg->ts)
+ lguest_set_ts();
+
+ /* SYSENTER is an optimized way of doing system calls. We
+ * can't allow it because it always jumps to privilege level 0.
+ * A normal Guest won't try it because we don't advertise it in
+ * CPUID, but a malicious Guest (or malicious Guest userspace
+ * program) could, so we tell the CPU to disable it before
+ * running the Guest. */
+ if (boot_cpu_has(X86_FEATURE_SEP))
+ wrmsr(MSR_IA32_SYSENTER_CS, 0, 0);
+
+ /* Now we actually run the Guest. It will pop back out when
+ * something interesting happens, and we can examine its
+ * registers to see what it was doing. */
+ run_guest_once(lg, lguest_pages(raw_smp_processor_id()));
+
+ /* The "regs" pointer contains two extra entries which are not
+ * really registers: a trap number which says what interrupt or
+ * trap made the switcher code come back, and an error code
+ * which some traps set. */
+
+ /* If the Guest page faulted, then the cr2 register will tell
+ * us the bad virtual address. We have to grab this now,
+ * because once we re-enable interrupts an interrupt could
+ * fault and thus overwrite cr2, or we could even move off to a
+ * different CPU. */
+ if (lg->regs->trapnum == 14)
+ lg->arch.last_pagefault = read_cr2();
+ /* Similarly, if we took a trap because the Guest used the FPU,
+ * we have to restore the FPU it expects to see. */
+ else if (lg->regs->trapnum == 7)
+ math_state_restore();
+
+ /* Restore SYSENTER if it's supposed to be on. */
+ if (boot_cpu_has(X86_FEATURE_SEP))
+ wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
+}
+
+/*H:130 Our Guest is usually so well behaved; it never tries to do things it
+ * isn't allowed to. Unfortunately, Linux's paravirtual infrastructure isn't
+ * quite complete, because it doesn't contain replacements for the Intel I/O
+ * instructions. As a result, the Guest sometimes fumbles across one during
+ * the boot process as it probes for various things which are usually attached
+ * to a PC.
+ *
+ * When the Guest uses one of these instructions, we get trap #13 (General
+ * Protection Fault) and come here. We see if it's one of those troublesome
+ * instructions and skip over it. We return true if we did. */
+static int emulate_insn(struct lguest *lg)
+{
+ u8 insn;
+ unsigned int insnlen = 0, in = 0, shift = 0;
+ /* The eip contains the *virtual* address of the Guest's instruction:
+ * guest_pa just subtracts the Guest's page_offset. */
+ unsigned long physaddr = guest_pa(lg, lg->regs->eip);
+
+ /* The guest_pa() function only works for Guest kernel addresses, but
+ * that's all we're trying to do anyway. */
+ if (lg->regs->eip < lg->page_offset)
+ return 0;
+
+ /* Decoding x86 instructions is icky. */
+ lgread(lg, &insn, physaddr, 1);
+
+ /* 0x66 is an "operand prefix". It means it's using the upper 16 bits
+ of the eax register. */
+ if (insn == 0x66) {
+ shift = 16;
+ /* The instruction is 1 byte so far, read the next byte. */
+ insnlen = 1;
+ lgread(lg, &insn, physaddr + insnlen, 1);
+ }
+
+ /* We can ignore the lower bit for the moment and decode the 4 opcodes
+ * we need to emulate. */
+ switch (insn & 0xFE) {
+ case 0xE4: /* in <next byte>,%al */
+ insnlen += 2;
+ in = 1;
+ break;
+ case 0xEC: /* in (%dx),%al */
+ insnlen += 1;
+ in = 1;
+ break;
+ case 0xE6: /* out %al,<next byte> */
+ insnlen += 2;
+ break;
+ case 0xEE: /* out %al,(%dx) */
+ insnlen += 1;
+ break;
+ default:
+ /* OK, we don't know what this is, can't emulate. */
+ return 0;
+ }
+
+ /* If it was an "IN" instruction, they expect the result to be read
+ * into %eax, so we change %eax. We always return all-ones, which
+ * traditionally means "there's nothing there". */
+ if (in) {
+ /* Lower bit tells is whether it's a 16 or 32 bit access */
+ if (insn & 0x1)
+ lg->regs->eax = 0xFFFFFFFF;
+ else
+ lg->regs->eax |= (0xFFFF << shift);
+ }
+ /* Finally, we've "done" the instruction, so move past it. */
+ lg->regs->eip += insnlen;
+ /* Success! */
+ return 1;
+}
+
+/*H:050 Once we've re-enabled interrupts, we look at why the Guest exited. */
+void lguest_arch_handle_trap(struct lguest *lg)
+{
+ switch (lg->regs->trapnum) {
+ case 13: /* We've intercepted a GPF. */
+ /* Check if this was one of those annoying IN or OUT
+ * instructions which we need to emulate. If so, we
+ * just go back into the Guest after we've done it. */
+ if (lg->regs->errcode == 0) {
+ if (emulate_insn(lg))
+ return;
+ }
+ break;
+ case 14: /* We've intercepted a page fault. */
+ /* The Guest accessed a virtual address that wasn't
+ * mapped. This happens a lot: we don't actually set
+ * up most of the page tables for the Guest at all when
+ * we start: as it runs it asks for more and more, and
+ * we set them up as required. In this case, we don't
+ * even tell the Guest that the fault happened.
+ *
+ * The errcode tells whether this was a read or a
+ * write, and whether kernel or userspace code. */
+ if (demand_page(lg, lg->arch.last_pagefault, lg->regs->errcode))
+ return;
+
+ /* OK, it's really not there (or not OK): the Guest
+ * needs to know. We write out the cr2 value so it
+ * knows where the fault occurred.
+ *
+ * Note that if the Guest were really messed up, this
+ * could happen before it's done the INITIALIZE
+ * hypercall, so lg->lguest_data will be NULL */
+ if (lg->lguest_data &&
+ put_user(lg->arch.last_pagefault, &lg->lguest_data->cr2))
+ kill_guest(lg, "Writing cr2");
+ break;
+ case 7: /* We've intercepted a Device Not Available fault. */
+ /* If the Guest doesn't want to know, we already
+ * restored the Floating Point Unit, so we just
+ * continue without telling it. */
+ if (!lg->ts)
+ return;
+ break;
+ case 32 ... 255:
+ /* These values mean a real interrupt occurred, in
+ * which case the Host handler has already been run.
+ * We just do a friendly check if another process
+ * should now be run, then fall through to loop
+ * around: */
+ cond_resched();
+ case LGUEST_TRAP_ENTRY: /* Handled before re-entering Guest */
+ return;
+ }
+
+ /* We didn't handle the trap, so it needs to go to the Guest. */
+ if (!deliver_trap(lg, lg->regs->trapnum))
+ /* If the Guest doesn't have a handler (either it hasn't
+ * registered any yet, or it's one of the faults we don't let
+ * it handle), it dies with a cryptic error message. */
+ kill_guest(lg, "unhandled trap %li at %#lx (%#lx)",
+ lg->regs->trapnum, lg->regs->eip,
+ lg->regs->trapnum == 14 ? lg->arch.last_pagefault
+ : lg->regs->errcode);
+}
+
+/* Now we can look at each of the routines this calls, in increasing order of
+ * complexity: do_hypercalls(), emulate_insn(), maybe_do_interrupt(),
+ * deliver_trap() and demand_page(). After all those, we'll be ready to
+ * examine the Switcher, and our philosophical understanding of the Host/Guest
+ * duality will be complete. :*/
+static void adjust_pge(void *on)
+{
+ if (on)
+ write_cr4(read_cr4() | X86_CR4_PGE);
+ else
+ write_cr4(read_cr4() & ~X86_CR4_PGE);
+}
+
+/*H:020 Now the Switcher is mapped and every thing else is ready, we need to do
+ * some more i386-specific initialization. */
+void __init lguest_arch_host_init(void)
+{
+ int i;
+
+ /* Most of the i386/switcher.S doesn't care that it's been moved; on
+ * Intel, jumps are relative, and it doesn't access any references to
+ * external code or data.
+ *
+ * The only exception is the interrupt handlers in switcher.S: their
+ * addresses are placed in a table (default_idt_entries), so we need to
+ * update the table with the new addresses. switcher_offset() is a
+ * convenience function which returns the distance between the builtin
+ * switcher code and the high-mapped copy we just made. */
+ for (i = 0; i < IDT_ENTRIES; i++)
+ default_idt_entries[i] += switcher_offset();
+
+ /*
+ * Set up the Switcher's per-cpu areas.
+ *
+ * Each CPU gets two pages of its own within the high-mapped region
+ * (aka. "struct lguest_pages"). Much of this can be initialized now,
+ * but some depends on what Guest we are running (which is set up in
+ * copy_in_guest_info()).
+ */
+ for_each_possible_cpu(i) {
+ /* lguest_pages() returns this CPU's two pages. */
+ struct lguest_pages *pages = lguest_pages(i);
+ /* This is a convenience pointer to make the code fit one
+ * statement to a line. */
+ struct lguest_ro_state *state = &pages->state;
+
+ /* The Global Descriptor Table: the Host has a different one
+ * for each CPU. We keep a descriptor for the GDT which says
+ * where it is and how big it is (the size is actually the last
+ * byte, not the size, hence the "-1"). */
+ state->host_gdt_desc.size = GDT_SIZE-1;
+ state->host_gdt_desc.address = (long)get_cpu_gdt_table(i);
+
+ /* All CPUs on the Host use the same Interrupt Descriptor
+ * Table, so we just use store_idt(), which gets this CPU's IDT
+ * descriptor. */
+ store_idt(&state->host_idt_desc);
+
+ /* The descriptors for the Guest's GDT and IDT can be filled
+ * out now, too. We copy the GDT & IDT into ->guest_gdt and
+ * ->guest_idt before actually running the Guest. */
+ state->guest_idt_desc.size = sizeof(state->guest_idt)-1;
+ state->guest_idt_desc.address = (long)&state->guest_idt;
+ state->guest_gdt_desc.size = sizeof(state->guest_gdt)-1;
+ state->guest_gdt_desc.address = (long)&state->guest_gdt;
+
+ /* We know where we want the stack to be when the Guest enters
+ * the switcher: in pages->regs. The stack grows upwards, so
+ * we start it at the end of that structure. */
+ state->guest_tss.esp0 = (long)(&pages->regs + 1);
+ /* And this is the GDT entry to use for the stack: we keep a
+ * couple of special LGUEST entries. */
+ state->guest_tss.ss0 = LGUEST_DS;
+
+ /* x86 can have a finegrained bitmap which indicates what I/O
+ * ports the process can use. We set it to the end of our
+ * structure, meaning "none". */
+ state->guest_tss.io_bitmap_base = sizeof(state->guest_tss);
+
+ /* Some GDT entries are the same across all Guests, so we can
+ * set them up now. */
+ setup_default_gdt_entries(state);
+ /* Most IDT entries are the same for all Guests, too.*/
+ setup_default_idt_entries(state, default_idt_entries);
+
+ /* The Host needs to be able to use the LGUEST segments on this
+ * CPU, too, so put them in the Host GDT. */
+ get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
+ get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
+ }
+
+ /* In the Switcher, we want the %cs segment register to use the
+ * LGUEST_CS GDT entry: we've put that in the Host and Guest GDTs, so
+ * it will be undisturbed when we switch. To change %cs and jump we
+ * need this structure to feed to Intel's "lcall" instruction. */
+ lguest_entry.offset = (long)switch_to_guest + switcher_offset();
+ lguest_entry.segment = LGUEST_CS;
+
+ /* Finally, we need to turn off "Page Global Enable". PGE is an
+ * optimization where page table entries are specially marked to show
+ * they never change. The Host kernel marks all the kernel pages this
+ * way because it's always present, even when userspace is running.
+ *
+ * Lguest breaks this: unbeknownst to the rest of the Host kernel, we
+ * switch to the Guest kernel. If you don't disable this on all CPUs,
+ * you'll get really weird bugs that you'll chase for two days.
+ *
+ * I used to turn PGE off every time we switched to the Guest and back
+ * on when we return, but that slowed the Switcher down noticibly. */
+
+ /* We don't need the complexity of CPUs coming and going while we're
+ * doing this. */
+ lock_cpu_hotplug();
+ if (cpu_has_pge) { /* We have a broader idea of "global". */
+ /* Remember that this was originally set (for cleanup). */
+ cpu_had_pge = 1;
+ /* adjust_pge is a helper function which sets or unsets the PGE
+ * bit on its CPU, depending on the argument (0 == unset). */
+ on_each_cpu(adjust_pge, (void *)0, 0, 1);
+ /* Turn off the feature in the global feature set. */
+ clear_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability);
+ }
+ unlock_cpu_hotplug();
+};
+/*:*/
+
+void __exit lguest_arch_host_fini(void)
+{
+ /* If we had PGE before we started, turn it back on now. */
+ lock_cpu_hotplug();
+ if (cpu_had_pge) {
+ set_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability);
+ /* adjust_pge's argument "1" means set PGE. */
+ on_each_cpu(adjust_pge, (void *)1, 0, 1);
+ }
+ unlock_cpu_hotplug();
+}
diff --git a/drivers/lguest/x86/switcher_32.S b/drivers/lguest/x86/switcher_32.S
index a3d23f79cba4..e66cec5ac240 100644
--- a/drivers/lguest/x86/switcher_32.S
+++ b/drivers/lguest/x86/switcher_32.S
@@ -48,7 +48,8 @@
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/page.h>
-#include "../lg.h"
+#include <asm/segment.h>
+#include <asm/lguest.h>
// We mark the start of the code to copy
// It's placed in .text tho it's never run here