IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers

This is the main peripheral IRQ controller on the BCM7xxx MIPS chips;
it has the following characteristics:

 - 64 to 160+ level IRQs
 - Atomic set/clear registers
 - Reasonably predictable register layout (N status words, then N
   mask status words, then N mask set words, then N mask clear words)
 - SMP affinity supported on most systems
 - Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3

This driver registers one IRQ domain and one IRQ chip to cover all
instances of the block.  Up to 4 instances of the block may appear, as
it supports 4-way IRQ affinity on BCM7435.

The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC
is used instead.  So this driver is primarily intended for MIPS STB chips.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: abrestic@chromium.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8844/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 5 insertions, 0 deletions

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index cc79d2a5a8c2..241a5b2dd6a1 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -60,6 +60,11 @@ config ATMEL_AIC5_IRQ
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 
+config BCM7038_L1_IRQ
+	bool
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
+
 config BCM7120_L2_IRQ
 	bool
 	select GENERIC_IRQ_CHIP