fsi: Add regmap and refactor sbefifo

Merge series from Eddie James <eajames@linux.ibm.com>:

The SBEFIFO hardware can now be attached over a new I2C endpoint interface
called the I2C Responder (I2CR). In order to use the existing SBEFIFO
driver, add a regmap driver for the FSI bus and an endpoint driver for the
I2CR. Then, refactor the SBEFIFO and OCC drivers to clean up and use the
new regmap driver or the I2CR interface.

This branch just has the regmap change so it can be shared with the FSI
code.

1 files changed, 15 insertions, 10 deletions

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index a8b36c3fddf1..996a8b5ee5ee 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -959,11 +959,9 @@ static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
 
 			domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE);
 			pteval = ((uint64_t)virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE;
-			if (domain_use_first_level(domain)) {
-				pteval |= DMA_FL_PTE_XD | DMA_FL_PTE_US;
-				if (iommu_is_dma_domain(&domain->domain))
-					pteval |= DMA_FL_PTE_ACCESS;
-			}
+			if (domain_use_first_level(domain))
+				pteval |= DMA_FL_PTE_XD | DMA_FL_PTE_US | DMA_FL_PTE_ACCESS;
+
 			if (cmpxchg64(&pte->val, 0ULL, pteval))
 				/* Someone else set it while we were thinking; use theirs. */
 				free_pgtable_page(tmp_page);
@@ -2410,6 +2408,7 @@ static int __init si_domain_init(int hw)
 
 	if (md_domain_init(si_domain, DEFAULT_DOMAIN_ADDRESS_WIDTH)) {
 		domain_exit(si_domain);
+		si_domain = NULL;
 		return -EFAULT;
 	}
 
@@ -3052,6 +3051,10 @@ free_iommu:
 		disable_dmar_iommu(iommu);
 		free_dmar_iommu(iommu);
 	}
+	if (si_domain) {
+		domain_exit(si_domain);
+		si_domain = NULL;
+	}
 
 	return ret;
 }
@@ -4534,7 +4537,7 @@ static void intel_iommu_get_resv_regions(struct device *device,
 	struct device *i_dev;
 	int i;
 
-	down_read(&dmar_global_lock);
+	rcu_read_lock();
 	for_each_rmrr_units(rmrr) {
 		for_each_active_dev_scope(rmrr->devices, rmrr->devices_cnt,
 					  i, i_dev) {
@@ -4552,14 +4555,15 @@ static void intel_iommu_get_resv_regions(struct device *device,
 				IOMMU_RESV_DIRECT_RELAXABLE : IOMMU_RESV_DIRECT;
 
 			resv = iommu_alloc_resv_region(rmrr->base_address,
-						       length, prot, type);
+						       length, prot, type,
+						       GFP_ATOMIC);
 			if (!resv)
 				break;
 
 			list_add_tail(&resv->list, head);
 		}
 	}
-	up_read(&dmar_global_lock);
+	rcu_read_unlock();
 
 #ifdef CONFIG_INTEL_IOMMU_FLOPPY_WA
 	if (dev_is_pci(device)) {
@@ -4567,7 +4571,8 @@ static void intel_iommu_get_resv_regions(struct device *device,
 
 		if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA) {
 			reg = iommu_alloc_resv_region(0, 1UL << 24, prot,
-						   IOMMU_RESV_DIRECT_RELAXABLE);
+					IOMMU_RESV_DIRECT_RELAXABLE,
+					GFP_KERNEL);
 			if (reg)
 				list_add_tail(&reg->list, head);
 		}
@@ -4576,7 +4581,7 @@ static void intel_iommu_get_resv_regions(struct device *device,
 
 	reg = iommu_alloc_resv_region(IOAPIC_RANGE_START,
 				      IOAPIC_RANGE_END - IOAPIC_RANGE_START + 1,
-				      0, IOMMU_RESV_MSI);
+				      0, IOMMU_RESV_MSI, GFP_KERNEL);
 	if (!reg)
 		return;
 	list_add_tail(&reg->list, head);