Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

All conflicts were simple overlapping changes except perhaps
for the Thunder driver.

That driver has a change_mtu method explicitly for sending
a message to the hardware.  If that fails it returns an
error.

Normally a driver doesn't need an ndo_change_mtu method becuase those
are usually just range changes, which are now handled generically.
But since this extra operation is needed in the Thunder driver, it has
to stay.

However, if the message send fails we have to restore the original
MTU before the change because the entire call chain expects that if
an error is thrown by ndo_change_mtu then the MTU did not change.
Therefore code is added to nicvf_change_mtu to remember the original
MTU, and to restore it upon nicvf_update_hw_max_frs() failue.

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 28 insertions, 14 deletions

diff --git a/drivers/infiniband/sw/rxe/rxe_net.c b/drivers/infiniband/sw/rxe/rxe_net.c
index b8258e4f0aea..ffff5a54cb34 100644
--- a/drivers/infiniband/sw/rxe/rxe_net.c
+++ b/drivers/infiniband/sw/rxe/rxe_net.c
@@ -243,10 +243,8 @@ static struct socket *rxe_setup_udp_tunnel(struct net *net, __be16 port,
 {
 	int err;
 	struct socket *sock;
-	struct udp_port_cfg udp_cfg;
-	struct udp_tunnel_sock_cfg tnl_cfg;
-
-	memset(&udp_cfg, 0, sizeof(udp_cfg));
+	struct udp_port_cfg udp_cfg = {0};
+	struct udp_tunnel_sock_cfg tnl_cfg = {0};
 
 	if (ipv6) {
 		udp_cfg.family = AF_INET6;
@@ -264,10 +262,8 @@ static struct socket *rxe_setup_udp_tunnel(struct net *net, __be16 port,
 		return ERR_PTR(err);
 	}
 
-	tnl_cfg.sk_user_data = NULL;
 	tnl_cfg.encap_type = 1;
 	tnl_cfg.encap_rcv = rxe_udp_encap_recv;
-	tnl_cfg.encap_destroy = NULL;
 
 	/* Setup UDP tunnel */
 	setup_udp_tunnel_sock(net, sock, &tnl_cfg);
diff --git a/drivers/infiniband/sw/rxe/rxe_qp.c b/drivers/infiniband/sw/rxe/rxe_qp.c
index b8036cfbce04..c3e60e4bde6e 100644
--- a/drivers/infiniband/sw/rxe/rxe_qp.c
+++ b/drivers/infiniband/sw/rxe/rxe_qp.c
@@ -522,6 +522,7 @@ static void rxe_qp_reset(struct rxe_qp *qp)
 	if (qp->sq.queue) {
 		__rxe_do_task(&qp->comp.task);
 		__rxe_do_task(&qp->req.task);
+		rxe_queue_reset(qp->sq.queue);
 	}
 
 	/* cleanup attributes */
@@ -573,6 +574,7 @@ void rxe_qp_error(struct rxe_qp *qp)
 {
 	qp->req.state = QP_STATE_ERROR;
 	qp->resp.state = QP_STATE_ERROR;
+	qp->attr.qp_state = IB_QPS_ERR;
 
 	/* drain work and packet queues */
 	rxe_run_task(&qp->resp.task, 1);
diff --git a/drivers/infiniband/sw/rxe/rxe_queue.c b/drivers/infiniband/sw/rxe/rxe_queue.c
index 08274254eb88..d14bf496d62d 100644
--- a/drivers/infiniband/sw/rxe/rxe_queue.c
+++ b/drivers/infiniband/sw/rxe/rxe_queue.c
@@ -84,6 +84,15 @@ err1:
 	return -EINVAL;
 }
 
+inline void rxe_queue_reset(struct rxe_queue *q)
+{
+	/* queue is comprised from header and the memory
+	 * of the actual queue. See "struct rxe_queue_buf" in rxe_queue.h
+	 * reset only the queue itself and not the management header
+	 */
+	memset(q->buf->data, 0, q->buf_size - sizeof(struct rxe_queue_buf));
+}
+
 struct rxe_queue *rxe_queue_init(struct rxe_dev *rxe,
 				 int *num_elem,
 				 unsigned int elem_size)
diff --git a/drivers/infiniband/sw/rxe/rxe_queue.h b/drivers/infiniband/sw/rxe/rxe_queue.h
index 239fd609c31e..8c8641c87817 100644
--- a/drivers/infiniband/sw/rxe/rxe_queue.h
+++ b/drivers/infiniband/sw/rxe/rxe_queue.h
@@ -84,6 +84,8 @@ int do_mmap_info(struct rxe_dev *rxe,
 		 size_t buf_size,
 		 struct rxe_mmap_info **ip_p);
 
+void rxe_queue_reset(struct rxe_queue *q);
+
 struct rxe_queue *rxe_queue_init(struct rxe_dev *rxe,
 				 int *num_elem,
 				 unsigned int elem_size);
diff --git a/drivers/infiniband/sw/rxe/rxe_req.c b/drivers/infiniband/sw/rxe/rxe_req.c
index 832846b73ea0..22bd9630dcd9 100644
--- a/drivers/infiniband/sw/rxe/rxe_req.c
+++ b/drivers/infiniband/sw/rxe/rxe_req.c
@@ -696,7 +696,8 @@ next_wqe:
 						       qp->req.wqe_index);
 			wqe->state = wqe_state_done;
 			wqe->status = IB_WC_SUCCESS;
-			goto complete;
+			__rxe_do_task(&qp->comp.task);
+			return 0;
 		}
 		payload = mtu;
 	}
@@ -745,13 +746,17 @@ err:
 	wqe->status = IB_WC_LOC_PROT_ERR;
 	wqe->state = wqe_state_error;
 
-complete:
-	if (qp_type(qp) != IB_QPT_RC) {
-		while (rxe_completer(qp) == 0)
-			;
-	}
-
-	return 0;
+	/*
+	 * IBA Spec. Section 10.7.3.1 SIGNALED COMPLETIONS
+	 * ---------8<---------8<-------------
+	 * ...Note that if a completion error occurs, a Work Completion
+	 * will always be generated, even if the signaling
+	 * indicator requests an Unsignaled Completion.
+	 * ---------8<---------8<-------------
+	 */
+	wqe->wr.send_flags |= IB_SEND_SIGNALED;
+	__rxe_do_task(&qp->comp.task);
+	return -EAGAIN;
 
 exit:
 	return -EAGAIN;