diff options
author | Ludovic Desroches <ludovic.desroches@atmel.com> | 2015-10-26 10:38:27 +0100 |
---|---|---|
committer | Wolfram Sang <wsa@the-dreams.de> | 2015-10-26 15:44:59 +0100 |
commit | a9bed6b10bd117a300cceb9062003f7a2761ef99 (patch) | |
tree | 6ab2b6481067ab4d759f4a206d84dd19745e6aae /drivers/i2c | |
parent | 43e9f2aa7788cc60eb11fe3cb4fb6f0b63c35de6 (diff) | |
download | linux-a9bed6b10bd117a300cceb9062003f7a2761ef99.tar.bz2 |
i2c: at91: manage unexpected RXRDY flag when starting a transfer
In some cases, we could start a new i2c transfer with the RXRDY flag
set. It is not a clean state and it leads to print annoying error
messages even if there no real issue. The cause is only having garbage
data in the Receive Holding Register because of a weird behavior of the
RXRDY flag.
Reported-by: Peter Rosin <peda@lysator.liu.se>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Peter Rosin <peda@lysator.liu.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Fixes: 93563a6a71bb ("i2c: at91: fix a race condition when using the DMA controller")
Cc: stable@vger.kernel.org #4.1
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/busses/i2c-at91.c | 36 |
1 files changed, 26 insertions, 10 deletions
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index 94c087b0b722..10835d1f559b 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -347,8 +347,14 @@ error: static void at91_twi_read_next_byte(struct at91_twi_dev *dev) { - if (!dev->buf_len) + /* + * If we are in this case, it means there is garbage data in RHR, so + * delete them. + */ + if (!dev->buf_len) { + at91_twi_read(dev, AT91_TWI_RHR); return; + } /* 8bit read works with and without FIFO */ *dev->buf = readb_relaxed(dev->base + AT91_TWI_RHR); @@ -465,6 +471,24 @@ static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id) if (!irqstatus) return IRQ_NONE; + /* + * In reception, the behavior of the twi device (before sama5d2) is + * weird. There is some magic about RXRDY flag! When a data has been + * almost received, the reception of a new one is anticipated if there + * is no stop command to send. That is the reason why ask for sending + * the stop command not on the last data but on the second last one. + * + * Unfortunately, we could still have the RXRDY flag set even if the + * transfer is done and we have read the last data. It might happen + * when the i2c slave device sends too quickly data after receiving the + * ack from the master. The data has been almost received before having + * the order to send stop. In this case, sending the stop command could + * cause a RXRDY interrupt with a TXCOMP one. It is better to manage + * the RXRDY interrupt first in order to not keep garbage data in the + * Receive Holding Register for the next transfer. + */ + if (irqstatus & AT91_TWI_RXRDY) + at91_twi_read_next_byte(dev); /* * When a NACK condition is detected, the I2C controller sets the NACK, @@ -507,8 +531,6 @@ static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id) if (irqstatus & (AT91_TWI_TXCOMP | AT91_TWI_NACK)) { at91_disable_twi_interrupts(dev); complete(&dev->cmd_complete); - } else if (irqstatus & AT91_TWI_RXRDY) { - at91_twi_read_next_byte(dev); } else if (irqstatus & AT91_TWI_TXRDY) { at91_twi_write_next_byte(dev); } @@ -525,7 +547,6 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) unsigned long time_left; bool has_unre_flag = dev->pdata->has_unre_flag; bool has_alt_cmd = dev->pdata->has_alt_cmd; - unsigned sr; /* * WARNING: the TXCOMP bit in the Status Register is NOT a clear on @@ -577,7 +598,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) dev->transfer_status = 0; /* Clear pending interrupts, such as NACK. */ - sr = at91_twi_read(dev, AT91_TWI_SR); + at91_twi_read(dev, AT91_TWI_SR); if (dev->fifo_size) { unsigned fifo_mr = at91_twi_read(dev, AT91_TWI_FMR); @@ -600,11 +621,6 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) } else if (dev->msg->flags & I2C_M_RD) { unsigned start_flags = AT91_TWI_START; - if (sr & AT91_TWI_RXRDY) { - dev_err(dev->dev, "RXRDY still set!"); - at91_twi_read(dev, AT91_TWI_RHR); - } - /* if only one byte is to be read, immediately stop transfer */ if (!has_alt_cmd && dev->buf_len <= 1 && !(dev->msg->flags & I2C_M_RECV_LEN)) |