i2c: npcm7xx: Annotate register field definitions with longer names

To make the code easier to understand, add longer names to the
definitions of register fields. These longer names are based on source
code published by DELL/AESS for WPCM450, but should apply just as well
to NPCM7xx and NPCM8xx.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

1 files changed, 28 insertions, 28 deletions

diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
index 9a7a2d0bf576..bbc7359e67f7 100644
--- a/drivers/i2c/busses/i2c-npcm7xx.c
+++ b/drivers/i2c/busses/i2c-npcm7xx.c
@@ -146,50 +146,50 @@ static const int npcm_i2caddr[I2C_NUM_OWN_ADDR] = {
 #endif
 
 /* NPCM_I2CST reg fields */
-#define NPCM_I2CST_XMIT			BIT(0)
-#define NPCM_I2CST_MASTER		BIT(1)
-#define NPCM_I2CST_NMATCH		BIT(2)
-#define NPCM_I2CST_STASTR		BIT(3)
-#define NPCM_I2CST_NEGACK		BIT(4)
-#define NPCM_I2CST_BER			BIT(5)
-#define NPCM_I2CST_SDAST		BIT(6)
-#define NPCM_I2CST_SLVSTP		BIT(7)
+#define NPCM_I2CST_XMIT			BIT(0)	/* Transmit mode */
+#define NPCM_I2CST_MASTER		BIT(1)	/* Master mode */
+#define NPCM_I2CST_NMATCH		BIT(2)	/* New match */
+#define NPCM_I2CST_STASTR		BIT(3)	/* Stall after start */
+#define NPCM_I2CST_NEGACK		BIT(4)	/* Negative ACK */
+#define NPCM_I2CST_BER			BIT(5)	/* Bus error */
+#define NPCM_I2CST_SDAST		BIT(6)	/* SDA status */
+#define NPCM_I2CST_SLVSTP		BIT(7)	/* Slave stop */
 
 /* NPCM_I2CCST reg fields */
-#define NPCM_I2CCST_BUSY		BIT(0)
-#define NPCM_I2CCST_BB			BIT(1)
-#define NPCM_I2CCST_MATCH		BIT(2)
-#define NPCM_I2CCST_GCMATCH		BIT(3)
-#define NPCM_I2CCST_TSDA		BIT(4)
-#define NPCM_I2CCST_TGSCL		BIT(5)
-#define NPCM_I2CCST_MATCHAF		BIT(6)
-#define NPCM_I2CCST_ARPMATCH		BIT(7)
+#define NPCM_I2CCST_BUSY		BIT(0)	/* Busy */
+#define NPCM_I2CCST_BB			BIT(1)	/* Bus busy */
+#define NPCM_I2CCST_MATCH		BIT(2)	/* Address match */
+#define NPCM_I2CCST_GCMATCH		BIT(3)	/* Global call match */
+#define NPCM_I2CCST_TSDA		BIT(4)	/* Test SDA line */
+#define NPCM_I2CCST_TGSCL		BIT(5)	/* Toggle SCL line */
+#define NPCM_I2CCST_MATCHAF		BIT(6)	/* Match address field */
+#define NPCM_I2CCST_ARPMATCH		BIT(7)	/* ARP address match */
 
 /* NPCM_I2CCTL1 reg fields */
-#define NPCM_I2CCTL1_START		BIT(0)
-#define NPCM_I2CCTL1_STOP		BIT(1)
-#define NPCM_I2CCTL1_INTEN		BIT(2)
+#define NPCM_I2CCTL1_START		BIT(0)	/* Generate start condition */
+#define NPCM_I2CCTL1_STOP		BIT(1)	/* Generate stop condition */
+#define NPCM_I2CCTL1_INTEN		BIT(2)	/* Interrupt enable */
 #define NPCM_I2CCTL1_EOBINTE		BIT(3)
 #define NPCM_I2CCTL1_ACK		BIT(4)
-#define NPCM_I2CCTL1_GCMEN		BIT(5)
-#define NPCM_I2CCTL1_NMINTE		BIT(6)
-#define NPCM_I2CCTL1_STASTRE		BIT(7)
+#define NPCM_I2CCTL1_GCMEN		BIT(5)	/* Global call match enable */
+#define NPCM_I2CCTL1_NMINTE		BIT(6)	/* New match interrupt enable */
+#define NPCM_I2CCTL1_STASTRE		BIT(7)	/* Stall after start enable */
 
 /* RW1S fields (inside a RW reg): */
 #define NPCM_I2CCTL1_RWS   \
 	(NPCM_I2CCTL1_START | NPCM_I2CCTL1_STOP | NPCM_I2CCTL1_ACK)
 
 /* npcm_i2caddr reg fields */
-#define NPCM_I2CADDR_A			GENMASK(6, 0)
-#define NPCM_I2CADDR_SAEN		BIT(7)
+#define NPCM_I2CADDR_A			GENMASK(6, 0)	/* Address */
+#define NPCM_I2CADDR_SAEN		BIT(7)		/* Slave address enable */
 
 /* NPCM_I2CCTL2 reg fields */
-#define I2CCTL2_ENABLE			BIT(0)
-#define I2CCTL2_SCLFRQ6_0		GENMASK(7, 1)
+#define I2CCTL2_ENABLE			BIT(0)		/* Module enable */
+#define I2CCTL2_SCLFRQ6_0		GENMASK(7, 1)	/* Bits 0:6 of frequency divisor */
 
 /* NPCM_I2CCTL3 reg fields */
-#define I2CCTL3_SCLFRQ8_7		GENMASK(1, 0)
-#define I2CCTL3_ARPMEN			BIT(2)
+#define I2CCTL3_SCLFRQ8_7		GENMASK(1, 0)	/* Bits 7:8 of frequency divisor */
+#define I2CCTL3_ARPMEN			BIT(2)	/* ARP match enable */
 #define I2CCTL3_IDL_START		BIT(3)
 #define I2CCTL3_400K_MODE		BIT(4)
 #define I2CCTL3_BNK_SEL			BIT(5)