diff options
author | Rudolf Marek <r.marek@assembler.cz> | 2013-07-14 23:17:26 +0200 |
---|---|---|
committer | Wolfram Sang <wsa@the-dreams.de> | 2013-08-15 15:17:31 +0200 |
commit | a94dd00f2e1c20deacffadaaa6eebf73b217c907 (patch) | |
tree | 904a001e72ac288a1b109c58c95f055c08b68cd5 /drivers/i2c/busses/i2c-piix4.c | |
parent | d63a9e851c2c007d9129b8dbfc1af24722bd18bd (diff) | |
download | linux-a94dd00f2e1c20deacffadaaa6eebf73b217c907.tar.bz2 |
i2c: piix4: Add support for secondary SMBus on AMD SB800 and AMD FCH chipsets
Add support for the secondary SMBus controller on the AMD SB800 and AMD FCH
chipsets.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'drivers/i2c/busses/i2c-piix4.c')
-rw-r--r-- | drivers/i2c/busses/i2c-piix4.c | 41 |
1 files changed, 31 insertions, 10 deletions
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index d05ad590af29..a028617b8f13 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -231,11 +231,11 @@ static int piix4_setup(struct pci_dev *PIIX4_dev, } static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, - const struct pci_device_id *id) + const struct pci_device_id *id, u8 aux) { unsigned short piix4_smba; unsigned short smba_idx = 0xcd6; - u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c; + u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en; /* SB800 and later SMBus does not support forcing address */ if (force || force_addr) { @@ -245,6 +245,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, } /* Determine the address of the SMBus areas */ + smb_en = (aux) ? 0x28 : 0x2c; + if (!request_region(smba_idx, 2, "smba_idx")) { dev_err(&PIIX4_dev->dev, "SMBus base address index region " "0x%x already in use!\n", smba_idx); @@ -272,6 +274,13 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, return -EBUSY; } + /* Aux SMBus does not support IRQ information */ + if (aux) { + dev_info(&PIIX4_dev->dev, + "SMBus Host Controller at 0x%x\n", piix4_smba); + return piix4_smba; + } + /* Request the SMBus I2C bus config region */ if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) { dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region " @@ -597,7 +606,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) dev->revision >= 0x40) || dev->vendor == PCI_VENDOR_ID_AMD) /* base address location etc changed in SB800 */ - retval = piix4_setup_sb800(dev, id); + retval = piix4_setup_sb800(dev, id, 0); else retval = piix4_setup(dev, id); @@ -611,17 +620,29 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) return retval; /* Check for auxiliary SMBus on some AMD chipsets */ + retval = -ENODEV; + if (dev->vendor == PCI_VENDOR_ID_ATI && - dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && - dev->revision < 0x40) { - retval = piix4_setup_aux(dev, id, 0x58); - if (retval > 0) { - /* Try to add the aux adapter if it exists, - * piix4_add_adapter will clean up if this fails */ - piix4_add_adapter(dev, retval, &piix4_aux_adapter); + dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) { + if (dev->revision < 0x40) { + retval = piix4_setup_aux(dev, id, 0x58); + } else { + /* SB800 added aux bus too */ + retval = piix4_setup_sb800(dev, id, 1); } } + if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) { + retval = piix4_setup_sb800(dev, id, 1); + } + + if (retval > 0) { + /* Try to add the aux adapter if it exists, + * piix4_add_adapter will clean up if this fails */ + piix4_add_adapter(dev, retval, &piix4_aux_adapter); + } + return 0; } |