Merge branch 'i2c/for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "Quite some driver updates:
   - piix4 can now handle multiplexed adapters
   - brcmstb, xlr, eg20t, designware drivers support more SoCs
   - emev2 gained i2c slave support
   - img-scb and rcar got bigger refactoring to remove issues
   - lots of common driver updates

  i2c core changes:
   - new quirk flag when an adapter does not support clock stretching,
     so clients can be configured to avoid that if possible
   - added a helper function to retrieve timing parameters from firmware
     (with rcar being the first user)
   - "multi-master" DT binding added so drivers can adapt to this
     setting (like disabling PM to keep arbitration working)
   - RuntimePM for the logical adapter device is now always enabled by
     the core to ensure propagation from childs to the parent (the HW
     device)
   - new macro builtin_i2c_driver to reduce boilerplate"

* 'i2c/for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits)
  i2c: create builtin_i2c_driver to avoid registration boilerplate
  i2c: imx: fix i2c resource leak with dma transfer
  dt-bindings: i2c: eeprom: add another EEPROM device
  dt-bindings: move I2C eeprom descriptions to the proper file
  i2c: designware: Do not require clock when SSCN and FFCN are provided
  DT: i2c: trivial-devices: Add Epson RX8010 and MPL3115
  i2c: s3c2410: remove superfluous runtime PM calls
  i2c: always enable RuntimePM for the adapter device
  i2c: designware: retry transfer on transient failure
  i2c: ibm_iic: rename i2c_timings struct due to clash with generic version
  i2c: designware: Add support for AMD Seattle I2C
  i2c: imx: Remove unneeded comments
  i2c: st: use to_platform_device()
  i2c: designware: use to_pci_dev()
  i2c: brcmstb: Adding support for CM and DSL SoCs
  i2c: mediatek: fix i2c multi transfer issue in high speed mode
  i2c: imx: improve code readability
  i2c: imx: Improve message log when DMA is not used
  i2c: imx: add runtime pm support to improve the performance
  i2c: imx: init bus recovery info before adding i2c adapter
  ...

1 files changed, 21 insertions, 11 deletions

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index bf72ae740fc1..438f1b4964c0 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -123,6 +123,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "80860F41", 0 },
 	{ "808622C1", 0 },
 	{ "AMD0010", ACCESS_INTR_MASK },
+	{ "AMDI0510", 0 },
 	{ "APMC0D0F", 0 },
 	{ }
 };
@@ -134,6 +135,18 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
 }
 #endif
 
+static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare)
+{
+	if (IS_ERR(i_dev->clk))
+		return PTR_ERR(i_dev->clk);
+
+	if (prepare)
+		return clk_prepare_enable(i_dev->clk);
+
+	clk_disable_unprepare(i_dev->clk);
+	return 0;
+}
+
 static int dw_i2c_plat_probe(struct platform_device *pdev)
 {
 	struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
@@ -206,16 +219,13 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 			DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
 
 	dev->clk = devm_clk_get(&pdev->dev, NULL);
-	dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
-	if (IS_ERR(dev->clk))
-		return PTR_ERR(dev->clk);
-	clk_prepare_enable(dev->clk);
+	if (!i2c_dw_plat_prepare_clk(dev, true)) {
+		dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
 
-	if (!dev->sda_hold_time && ht) {
-		u32 ic_clk = dev->get_clk_rate_khz(dev);
-
-		dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000,
-					     1000000);
+		if (!dev->sda_hold_time && ht)
+			dev->sda_hold_time = div_u64(
+				(u64)dev->get_clk_rate_khz(dev) * ht + 500000,
+				1000000);
 	}
 
 	if (!dev->tx_fifo_depth) {
@@ -297,7 +307,7 @@ static int dw_i2c_plat_suspend(struct device *dev)
 	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
 
 	i2c_dw_disable(i_dev);
-	clk_disable_unprepare(i_dev->clk);
+	i2c_dw_plat_prepare_clk(i_dev, false);
 
 	return 0;
 }
@@ -307,7 +317,7 @@ static int dw_i2c_plat_resume(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
 
-	clk_prepare_enable(i_dev->clk);
+	i2c_dw_plat_prepare_clk(i_dev, true);
 
 	if (!i_dev->pm_runtime_disabled)
 		i2c_dw_init(i_dev);