diff options
| author | David Brownell <david-b@pacbell.net> | 2008-05-03 19:33:15 -0700 |
|---|---|---|
| committer | Mark M. Hoffman <mhoffman@lightlink.com> | 2008-07-31 23:44:02 -0400 |
| commit | 9ebd3d822efeca2e73565516a80373c76ce3fa12 (patch) | |
| tree | 35947ad745ced49a5bfcd5dc1337ad0a4935d829 /drivers/hwmon/Kconfig | |
| parent | 01a52397e95a8532c59506691759dba9262d6be7 (diff) | |
| download | linux-9ebd3d822efeca2e73565516a80373c76ce3fa12.tar.bz2 | |
hwmon: (lm75) add new-style driver binding
More LM75 updates:
- Teach the LM75 driver to use new-style driver binding:
* Create a second driver struct, using new-style driver binding
methods cribbed from the legacy code.
* Add a MODULE_DEVICE_TABLE (for "newER-style binding")
* The legacy probe logic delegates its work to this new code.
* The legacy driver now uses the name "lm75_legacy".
- More careful initialization. Chips are put into 9-bit mode so
the current interconversion routines will never fail.
- Save the original chip configuration, and restore it on exit.
(Among other things, this normally turns off the mode where
the chip is constantly sampling ... and thus saves power.)
So the new-style code should catch all chips that boards declare,
while the legacy code catches others. This particular coexistence
strategy may need some work yet ... legacy modes might best be set
up explicitly by some tool not unlike "sensors-detect". (Or else
completely eradicated...)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Diffstat (limited to 'drivers/hwmon/Kconfig')
| -rw-r--r-- | drivers/hwmon/Kconfig | 7 |
1 files changed, 6 insertions, 1 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 86289c283dc8..c882fd05cf29 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -406,7 +406,12 @@ config SENSORS_LM75 - TelCom (now Microchip) TCN75 - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275 - Most of these chips will require a "force" module parameter. + This driver supports driver model based binding through board + specific I2C device tables. + + It also supports the "legacy" style of driver binding. To use + that with some chips which don't replicate LM75 quirks exactly, + you may need the "force" module parameter. This driver can also be built as a module. If so, the module will be called lm75. |