diff options
author | Maxime Ripard <maxime@cerno.tech> | 2022-10-27 14:52:47 +0200 |
---|---|---|
committer | Maxime Ripard <maxime@cerno.tech> | 2022-10-28 13:03:20 +0200 |
commit | fc04142894d1d970e21c6ab3ab663aa51c5a8b7b (patch) | |
tree | 444ca86f90c4ab813f11c54b1ef01f1b9de0450b /drivers/gpu | |
parent | f09e172da85854d71284638d8ca25f0b3a980cb6 (diff) | |
download | linux-fc04142894d1d970e21c6ab3ab663aa51c5a8b7b.tar.bz2 |
drm/vc4: Make sure we don't end up with a core clock too high
Following the clock rate range improvements to the clock framework,
trying to set a disjoint range on a clock will now result in an error.
Thus, we can't set a minimum rate higher than the maximum reported by
the firmware, or clk_set_min_rate() will fail.
Thus we need to clamp the rate we are about to ask for to the maximum
rate possible on that clock.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-7-fe9e7ac8b111@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Diffstat (limited to 'drivers/gpu')
-rw-r--r-- | drivers/gpu/drm/vc4/vc4_kms.c | 13 |
1 files changed, 8 insertions, 5 deletions
diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c index 4419e810103d..5c97642ed66a 100644 --- a/drivers/gpu/drm/vc4/vc4_kms.c +++ b/drivers/gpu/drm/vc4/vc4_kms.c @@ -396,8 +396,8 @@ static void vc4_atomic_commit_tail(struct drm_atomic_state *state) if (vc4->is_vc5) { unsigned long state_rate = max(old_hvs_state->core_clock_rate, new_hvs_state->core_clock_rate); - unsigned long core_rate = max_t(unsigned long, - 500000000, state_rate); + unsigned long core_rate = clamp_t(unsigned long, state_rate, + 500000000, hvs->max_core_rate); drm_dbg(dev, "Raising the core clock at %lu Hz\n", core_rate); @@ -431,14 +431,17 @@ static void vc4_atomic_commit_tail(struct drm_atomic_state *state) drm_atomic_helper_cleanup_planes(dev, state); if (vc4->is_vc5) { - drm_dbg(dev, "Running the core clock at %lu Hz\n", - new_hvs_state->core_clock_rate); + unsigned long core_rate = min_t(unsigned long, + hvs->max_core_rate, + new_hvs_state->core_clock_rate); + + drm_dbg(dev, "Running the core clock at %lu Hz\n", core_rate); /* * Request a clock rate based on the current HVS * requirements. */ - WARN_ON(clk_set_min_rate(hvs->core_clk, new_hvs_state->core_clock_rate)); + WARN_ON(clk_set_min_rate(hvs->core_clk, core_rate)); drm_dbg(dev, "Core clock actual rate: %lu Hz\n", clk_get_rate(hvs->core_clk)); |