drm/amd/swsmu: add aldebaran smu driver if header (v2)

add aldebaran smu13 driver if header

v2: squash in updates

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Kenneth Feng <Kenneth.feng@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1 files changed, 512 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/pm/inc/smu13_driver_if_aldebaran.h b/drivers/gpu/drm/amd/pm/inc/smu13_driver_if_aldebaran.h
new file mode 100644
index 000000000000..df2ead254f37
--- /dev/null
+++ b/drivers/gpu/drm/amd/pm/inc/smu13_driver_if_aldebaran.h
@@ -0,0 +1,512 @@
+/*
+ * Copyright 2020 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef SMU13_DRIVER_IF_ALDEBARAN_H
+#define SMU13_DRIVER_IF_ALDEBARAN_H
+
+#define NUM_VCLK_DPM_LEVELS   8
+#define NUM_DCLK_DPM_LEVELS   8
+#define NUM_SOCCLK_DPM_LEVELS 8
+#define NUM_LCLK_DPM_LEVELS   8
+#define NUM_UCLK_DPM_LEVELS   4
+#define NUM_FCLK_DPM_LEVELS   8
+#define NUM_XGMI_DPM_LEVELS   4
+
+// Feature Control Defines
+#define FEATURE_DATA_CALCULATIONS       0
+#define FEATURE_DPM_GFXCLK_BIT          1
+#define FEATURE_DPM_UCLK_BIT            2
+#define FEATURE_DPM_SOCCLK_BIT          3
+#define FEATURE_DPM_FCLK_BIT            4
+#define FEATURE_DPM_LCLK_BIT            5
+#define FEATURE_DPM_XGMI_BIT            6
+#define FEATURE_DS_GFXCLK_BIT           7
+#define FEATURE_DS_SOCCLK_BIT           8
+#define FEATURE_DS_LCLK_BIT             9
+#define FEATURE_DS_FCLK_BIT             10
+#define FEATURE_DS_UCLK_BIT             11
+#define FEATURE_GFX_SS_BIT              12
+#define FEATURE_DPM_VCN_BIT             13
+#define FEATURE_RSMU_SMN_CG_BIT         14
+#define FEATURE_WAFL_CG_BIT             15
+#define FEATURE_PPT_BIT                 16
+#define FEATURE_TDC_BIT                 17
+#define FEATURE_APCC_PLUS_BIT           18
+#define FEATURE_APCC_DFLL_BIT           19
+#define FEATURE_FW_CTF_BIT              20
+#define FEATURE_THERMAL_BIT             21
+#define FEATURE_OUT_OF_BAND_MONITOR_BIT 22
+#define FEATURE_SPARE_23_BIT            23
+#define FEATURE_XGMI_PER_LINK_PWR_DWN   24
+#define FEATURE_DF_CSTATE               25
+#define FEATURE_FUSE_CG_BIT             26
+#define FEATURE_MP1_CG_BIT              27
+#define FEATURE_SMUIO_CG_BIT            28
+#define FEATURE_THM_CG_BIT              29
+#define FEATURE_CLK_CG_BIT              30
+#define FEATURE_SPARE_31_BIT            31
+#define FEATURE_SPARE_32_BIT            32
+#define FEATURE_SPARE_33_BIT            33
+#define FEATURE_SPARE_34_BIT            34
+#define FEATURE_SPARE_35_BIT            35
+#define FEATURE_SPARE_36_BIT            36
+#define FEATURE_SPARE_37_BIT            37
+#define FEATURE_SPARE_38_BIT            38
+#define FEATURE_SPARE_39_BIT            39
+#define FEATURE_SPARE_40_BIT            40
+#define FEATURE_SPARE_41_BIT            41
+#define FEATURE_SPARE_42_BIT            42
+#define FEATURE_SPARE_43_BIT            43
+#define FEATURE_SPARE_44_BIT            44
+#define FEATURE_SPARE_45_BIT            45
+#define FEATURE_SPARE_46_BIT            46
+#define FEATURE_SPARE_47_BIT            47
+#define FEATURE_SPARE_48_BIT            48
+#define FEATURE_SPARE_49_BIT            49
+#define FEATURE_SPARE_50_BIT            50
+#define FEATURE_SPARE_51_BIT            51
+#define FEATURE_SPARE_52_BIT            52
+#define FEATURE_SPARE_53_BIT            53
+#define FEATURE_SPARE_54_BIT            54
+#define FEATURE_SPARE_55_BIT            55
+#define FEATURE_SPARE_56_BIT            56
+#define FEATURE_SPARE_57_BIT            57
+#define FEATURE_SPARE_58_BIT            58
+#define FEATURE_SPARE_59_BIT            59
+#define FEATURE_SPARE_60_BIT            60
+#define FEATURE_SPARE_61_BIT            61
+#define FEATURE_SPARE_62_BIT            62
+#define FEATURE_SPARE_63_BIT            63
+
+#define NUM_FEATURES                    64
+
+// I2C Config Bit Defines
+#define I2C_CONTROLLER_ENABLED  1
+#define I2C_CONTROLLER_DISABLED 0
+
+// Throttler Status Bits.
+// These are aligned with the out of band monitor alarm bits for common throttlers
+#define THROTTLER_PPT0_BIT         0
+#define THROTTLER_PPT1_BIT         1
+#define THROTTLER_TDC_GFX_BIT      2
+#define THROTTLER_TDC_SOC_BIT      3
+#define THROTTLER_TDC_HBM_BIT      4
+#define THROTTLER_SPARE_5          5
+#define THROTTLER_TEMP_GPU_BIT     6
+#define THROTTLER_TEMP_MEM_BIT     7
+#define THORTTLER_SPARE_8          8
+#define THORTTLER_SPARE_9          9
+#define THORTTLER_SPARE_10         10
+#define THROTTLER_TEMP_VR_GFX_BIT  11
+#define THROTTLER_TEMP_VR_SOC_BIT  12
+#define THROTTLER_TEMP_VR_MEM_BIT  13
+#define THORTTLER_SPARE_14         14
+#define THORTTLER_SPARE_15         15
+#define THORTTLER_SPARE_16         16
+#define THORTTLER_SPARE_17         17
+#define THORTTLER_SPARE_18         18
+#define THROTTLER_APCC_BIT         19
+
+// Table transfer status
+#define TABLE_TRANSFER_OK         0x0
+#define TABLE_TRANSFER_FAILED     0xFF
+#define TABLE_TRANSFER_PENDING    0xAB
+
+//I2C Interface
+#define NUM_I2C_CONTROLLERS                8
+
+#define I2C_CONTROLLER_ENABLED             1
+#define I2C_CONTROLLER_DISABLED            0
+
+#define MAX_SW_I2C_COMMANDS                24
+
+typedef enum {
+  I2C_CONTROLLER_PORT_0, //CKSVII2C0
+  I2C_CONTROLLER_PORT_1, //CKSVII2C1
+  I2C_CONTROLLER_PORT_COUNT,
+} I2cControllerPort_e;
+
+typedef enum {
+  I2C_CONTROLLER_THROTTLER_TYPE_NONE,
+  I2C_CONTROLLER_THROTTLER_VR_GFX0,
+  I2C_CONTROLLER_THROTTLER_VR_GFX1,
+  I2C_CONTROLLER_THROTTLER_VR_SOC,
+  I2C_CONTROLLER_THROTTLER_VR_MEM,
+  I2C_CONTROLLER_THROTTLER_COUNT,
+} I2cControllerThrottler_e;
+
+typedef enum {
+  I2C_CONTROLLER_PROTOCOL_VR_MP2855,
+  I2C_CONTROLLER_PROTOCOL_COUNT,
+} I2cControllerProtocol_e;
+
+typedef struct {
+  uint8_t   Enabled;
+  uint8_t   Speed;
+  uint8_t   SlaveAddress;
+  uint8_t   ControllerPort;
+  uint8_t   ThermalThrotter;
+  uint8_t   I2cProtocol;
+  uint8_t   PaddingConfig[2];
+} I2cControllerConfig_t;
+
+typedef enum {
+  I2C_PORT_SVD_SCL,
+  I2C_PORT_GPIO,
+} I2cPort_e;
+
+typedef enum {
+  I2C_SPEED_FAST_50K,     //50  Kbits/s
+  I2C_SPEED_FAST_100K,    //100 Kbits/s
+  I2C_SPEED_FAST_400K,    //400 Kbits/s
+  I2C_SPEED_FAST_PLUS_1M, //1   Mbits/s (in fast mode)
+  I2C_SPEED_HIGH_1M,      //1   Mbits/s (in high speed mode)
+  I2C_SPEED_HIGH_2M,      //2.3 Mbits/s
+  I2C_SPEED_COUNT,
+} I2cSpeed_e;
+
+typedef enum {
+  I2C_CMD_READ,
+  I2C_CMD_WRITE,
+  I2C_CMD_COUNT,
+} I2cCmdType_e;
+
+#define CMDCONFIG_STOP_BIT             0
+#define CMDCONFIG_RESTART_BIT          1
+#define CMDCONFIG_READWRITE_BIT        2 //bit should be 0 for read, 1 for write
+
+#define CMDCONFIG_STOP_MASK           (1 << CMDCONFIG_STOP_BIT)
+#define CMDCONFIG_RESTART_MASK        (1 << CMDCONFIG_RESTART_BIT)
+#define CMDCONFIG_READWRITE_MASK      (1 << CMDCONFIG_READWRITE_BIT)
+
+typedef struct {
+  uint8_t ReadWriteData;  //Return data for read. Data to send for write
+  uint8_t CmdConfig; //Includes whether associated command should have a stop or restart command, and is a read or write
+} SwI2cCmd_t; //SW I2C Command Table
+
+typedef struct {
+  uint8_t    I2CcontrollerPort; //CKSVII2C0(0) or //CKSVII2C1(1)
+  uint8_t    I2CSpeed;          //Use I2cSpeed_e to indicate speed to select
+  uint8_t    SlaveAddress;      //Slave address of device
+  uint8_t    NumCmds;           //Number of commands
+  SwI2cCmd_t SwI2cCmds[MAX_SW_I2C_COMMANDS];
+} SwI2cRequest_t; // SW I2C Request Table
+
+typedef struct {
+  SwI2cRequest_t SwI2cRequest;
+  uint32_t       Spare[8];
+  uint32_t       MmHubPadding[8]; // SMU internal use
+} SwI2cRequestExternal_t;
+
+typedef struct {
+  uint32_t a;  // store in IEEE float format in this variable
+  uint32_t b;  // store in IEEE float format in this variable
+  uint32_t c;  // store in IEEE float format in this variable
+} QuadraticInt_t;
+
+typedef struct {
+  uint32_t m;  // store in IEEE float format in this variable
+  uint32_t b;  // store in IEEE float format in this variable
+} LinearInt_t;
+
+typedef enum {
+  GFXCLK_SOURCE_PLL,
+  GFXCLK_SOURCE_DFLL,
+  GFXCLK_SOURCE_COUNT,
+} GfxclkSrc_e;
+
+typedef enum {
+  PPCLK_GFXCLK,
+  PPCLK_VCLK,
+  PPCLK_DCLK,
+  PPCLK_SOCCLK,
+  PPCLK_UCLK,
+  PPCLK_FCLK,
+  PPCLK_LCLK,
+  PPCLK_COUNT,
+} PPCLK_e;
+
+typedef enum {
+  GPIO_INT_POLARITY_ACTIVE_LOW,
+  GPIO_INT_POLARITY_ACTIVE_HIGH,
+} GpioIntPolarity_e;
+
+//PPSMC_MSG_SetUclkDpmMode
+typedef enum {
+  UCLK_DPM_MODE_BANDWIDTH,
+  UCLK_DPM_MODE_LATENCY,
+} UCLK_DPM_MODE_e;
+
+typedef struct {
+  uint8_t        StartupLevel;
+  uint8_t        NumDiscreteLevels;   // Set to 2 (Fmin, Fmax) when using fine grained DPM, otherwise set to # discrete levels used
+  uint16_t       SsFmin;              // Fmin for SS curve. If SS curve is selected, will use V@SSFmin for F <= Fmin
+  LinearInt_t    ConversionToAvfsClk; // Transfer function to AVFS Clock (GHz->GHz)
+  QuadraticInt_t SsCurve;             // Slow-slow curve (GHz->V)
+} DpmDescriptor_t;
+
+typedef struct {
+  uint32_t Version;
+
+  // SECTION: Feature Enablement
+  uint32_t FeaturesToRun[2];
+
+  // SECTION: Infrastructure Limits
+  uint16_t PptLimit;      // Watts
+  uint16_t TdcLimitGfx;   // Amps
+  uint16_t TdcLimitSoc;   // Amps
+  uint16_t TdcLimitHbm;   // Amps
+  uint16_t ThotspotLimit; // Celcius
+  uint16_t TmemLimit;     // Celcius
+  uint16_t Tvr_gfxLimit;  // Celcius
+  uint16_t Tvr_memLimit;  // Celcius
+  uint16_t Tvr_socLimit;  // Celcius
+  uint16_t PaddingLimit;
+
+  // SECTION: Voltage Control Parameters
+  uint16_t MaxVoltageGfx; // In mV(Q2) Maximum Voltage allowable of VDD_GFX
+  uint16_t MaxVoltageSoc; // In mV(Q2) Maximum Voltage allowable of VDD_SOC
+
+  //SECTION: DPM Config 1
+  DpmDescriptor_t DpmDescriptor[PPCLK_COUNT];
+
+  uint8_t  DidTableVclk[NUM_VCLK_DPM_LEVELS];     //PPCLK_VCLK
+  uint8_t  DidTableDclk[NUM_DCLK_DPM_LEVELS];     //PPCLK_DCLK
+  uint8_t  DidTableSocclk[NUM_SOCCLK_DPM_LEVELS]; //PPCLK_SOCCLK
+  uint8_t  DidTableLclk[NUM_LCLK_DPM_LEVELS];     //PPCLK_LCLK
+  uint32_t FidTableFclk[NUM_FCLK_DPM_LEVELS];     //PPCLK_FCLK
+  uint8_t  DidTableFclk[NUM_FCLK_DPM_LEVELS];     //PPCLK_FCLK
+  uint32_t FidTableUclk[NUM_UCLK_DPM_LEVELS];     //PPCLK_UCLK
+  uint8_t  DidTableUclk[NUM_UCLK_DPM_LEVELS];     //PPCLK_UCLK
+
+  uint32_t StartupFidPll0; //GFXAVFSCLK, SOCCLK, MP0CLK, MPIOCLK, DXIOCLK
+  uint32_t StartupFidPll4; //VCLK, DCLK, WAFLCLK
+  uint32_t StartupFidPll5; //SMNCLK, MP1CLK, LCLK
+
+  uint8_t  StartupSmnclkDid;
+  uint8_t  StartupMp0clkDid;
+  uint8_t  StartupMp1clkDid;
+  uint8_t  StartupWaflclkDid;
+  uint8_t  StartupGfxavfsclkDid;
+  uint8_t  StartupMpioclkDid;
+  uint8_t  StartupDxioclkDid;
+  uint8_t  spare123;
+
+  uint8_t  StartupVidGpu0Svi0Plane0; //VDDCR_GFX0
+  uint8_t  StartupVidGpu0Svi0Plane1; //VDDCR_SOC
+  uint8_t  StartupVidGpu0Svi1Plane0; //VDDCR_HBM
+  uint8_t  StartupVidGpu0Svi1Plane1; //UNUSED [0 = plane is not used and should not be programmed]
+
+  uint8_t  StartupVidGpu1Svi0Plane0; //VDDCR_GFX1
+  uint8_t  StartupVidGpu1Svi0Plane1; //UNUSED [0 = plane is not used and should not be programmed]
+  uint8_t  StartupVidGpu1Svi1Plane0; //UNUSED [0 = plane is not used and should not be programmed]
+  uint8_t  StartupVidGpu1Svi1Plane1; //UNUSED [0 = plane is not used and should not be programmed]
+
+  // GFXCLK DPM
+  uint16_t GfxclkFmax;   // In MHz
+  uint16_t GfxclkFmin;   // In MHz
+  uint16_t GfxclkFidle;  // In MHz
+  uint16_t GfxclkFinit;  // In MHz
+  uint8_t  GfxclkSource; // GfxclkSrc_e [0 = PLL, 1 = DFLL]
+  uint8_t  spare1[2];
+  uint8_t  StartupGfxclkDid;
+  uint32_t StartupGfxclkFid;
+
+  // SECTION: AVFS
+  uint16_t GFX_Guardband_Freq[8];         // MHz [unsigned]
+  int16_t  GFX_Guardband_Voltage_Cold[8]; // mV [signed]
+  int16_t  GFX_Guardband_Voltage_Mid[8];  // mV [signed]
+  int16_t  GFX_Guardband_Voltage_Hot[8];  // mV [signed]
+
+  uint16_t SOC_Guardband_Freq[8];         // MHz [unsigned]
+  int16_t  SOC_Guardband_Voltage_Cold[8]; // mV [signed]
+  int16_t  SOC_Guardband_Voltage_Mid[8];  // mV [signed]
+  int16_t  SOC_Guardband_Voltage_Hot[8];  // mV [signed]
+
+  // VDDCR_GFX BTC
+  uint16_t DcBtcEnabled;
+  int16_t  DcBtcMin;       // mV [signed]
+  int16_t  DcBtcMax;       // mV [signed]
+  int16_t  DcBtcGb;        // mV [signed]
+
+  // SECTION: XGMI
+  uint8_t  XgmiLinkSpeed[NUM_XGMI_DPM_LEVELS]; //Gbps [EX: 32 = 32Gbps]
+  uint8_t  XgmiLinkWidth[NUM_XGMI_DPM_LEVELS]; //Width [EX: 16 = x16]
+  uint8_t  XgmiStartupLevel;
+  uint8_t  spare12[3];
+
+  // GFX Vmin
+  uint16_t GFX_PPVmin_Enabled;
+  uint16_t GFX_Vmin_Plat_Offset_Hot;  // mV
+  uint16_t GFX_Vmin_Plat_Offset_Cold; // mV
+  uint16_t GFX_Vmin_Hot_T0;           // mV
+  uint16_t GFX_Vmin_Cold_T0;          // mV
+  uint16_t GFX_Vmin_Hot_Eol;          // mV
+  uint16_t GFX_Vmin_Cold_Eol;         // mV
+  uint16_t GFX_Vmin_Aging_Offset;     // mV
+  uint16_t GFX_Vmin_Temperature_Hot;  // 'C
+  uint16_t GFX_Vmin_Temperature_Cold; // 'C
+
+  // SOC Vmin
+  uint16_t SOC_PPVmin_Enabled;
+  uint16_t SOC_Vmin_Plat_Offset_Hot;  // mV
+  uint16_t SOC_Vmin_Plat_Offset_Cold; // mV
+  uint16_t SOC_Vmin_Hot_T0;           // mV
+  uint16_t SOC_Vmin_Cold_T0;          // mV
+  uint16_t SOC_Vmin_Hot_Eol;          // mV
+  uint16_t SOC_Vmin_Cold_Eol;         // mV
+  uint16_t SOC_Vmin_Aging_Offset;     // mV
+  uint16_t SOC_Vmin_Temperature_Hot;  // 'C
+  uint16_t SOC_Vmin_Temperature_Cold; // 'C
+
+  // APCC Settings
+  uint32_t ApccPlusResidencyLimit; //PCC residency % (0-100)
+
+  // Determinism
+  uint16_t DeterminismVoltageOffset; //mV
+  uint16_t spare22;
+
+  // reserved
+  uint32_t spare3[14];
+
+  // SECTION: BOARD PARAMETERS
+  // Telemetry Settings
+  uint16_t GfxMaxCurrent; // in Amps
+  int8_t   GfxOffset;     // in Amps
+  uint8_t  Padding_TelemetryGfx;
+
+  uint16_t SocMaxCurrent; // in Amps
+  int8_t   SocOffset;     // in Amps
+  uint8_t  Padding_TelemetrySoc;
+
+  uint16_t MemMaxCurrent; // in Amps
+  int8_t   MemOffset;     // in Amps
+  uint8_t  Padding_TelemetryMem;
+
+  uint16_t BoardMaxCurrent; // in Amps
+  int8_t   BoardOffset;     // in Amps
+  uint8_t  Padding_TelemetryBoardInput;
+
+  // Platform input telemetry voltage coefficient
+  uint32_t BoardVoltageCoeffA; // decode by /1000
+  uint32_t BoardVoltageCoeffB; // decode by /1000
+
+  // GPIO Settings
+  uint8_t  VR0HotGpio;     // GPIO pin configured for VR0 HOT event
+  uint8_t  VR0HotPolarity; // GPIO polarity for VR0 HOT event
+  uint8_t  VR1HotGpio;     // GPIO pin configured for VR1 HOT event
+  uint8_t  VR1HotPolarity; // GPIO polarity for VR1 HOT event
+
+  // UCLK Spread Spectrum
+  uint8_t  UclkSpreadEnabled; // on or off
+  uint8_t  UclkSpreadPercent; // Q4.4
+  uint16_t UclkSpreadFreq;    // kHz
+
+  // FCLK Spread Spectrum
+  uint8_t  FclkSpreadEnabled; // on or off
+  uint8_t  FclkSpreadPercent; // Q4.4
+  uint16_t FclkSpreadFreq;    // kHz
+
+  // I2C Controller Structure
+  I2cControllerConfig_t  I2cControllers[NUM_I2C_CONTROLLERS];
+
+  // GPIO pins for I2C communications with 2nd controller for Input Telemetry Sequence
+  uint8_t  GpioI2cScl; // Serial Clock
+  uint8_t  GpioI2cSda; // Serial Data
+  uint16_t spare5;
+
+  //reserved
+  uint32_t reserved[16];
+
+} PPTable_t;
+
+typedef struct {
+  // Time constant parameters for clock averages in ms
+  uint16_t     GfxclkAverageLpfTau;
+  uint16_t     SocclkAverageLpfTau;
+  uint16_t     UclkAverageLpfTau;
+  uint16_t     GfxActivityLpfTau;
+  uint16_t     UclkActivityLpfTau;
+
+  uint16_t     SocketPowerLpfTau;
+
+  uint32_t     Spare[8];
+  // Padding - ignore
+  uint32_t     MmHubPadding[8]; // SMU internal use
+} DriverSmuConfig_t;
+
+typedef struct {
+  uint16_t CurrClock[PPCLK_COUNT];
+  uint16_t Padding1              ;
+  uint16_t AverageGfxclkFrequency;
+  uint16_t AverageSocclkFrequency;
+  uint16_t AverageUclkFrequency  ;
+  uint16_t AverageGfxActivity    ;
+  uint16_t AverageUclkActivity   ;
+  uint8_t  CurrSocVoltageOffset  ;
+  uint8_t  CurrGfxVoltageOffset  ;
+  uint8_t  CurrMemVidOffset      ;
+  uint8_t  Padding8              ;
+  uint16_t AverageSocketPower    ;
+  uint16_t TemperatureEdge       ;
+  uint16_t TemperatureHotspot    ;
+  uint16_t TemperatureHBM        ;  // Max
+  uint16_t TemperatureVrGfx      ;
+  uint16_t TemperatureVrSoc      ;
+  uint16_t TemperatureVrMem      ;
+  uint32_t ThrottlerStatus       ;
+
+  uint32_t PublicSerialNumLower32;
+  uint32_t PublicSerialNumUpper32;
+  uint16_t TemperatureAllHBM[4]  ;
+  uint32_t GfxBusyAcc            ;
+  uint32_t DramBusyAcc           ;
+  uint32_t Spare[4];
+
+  // Padding - ignore
+  uint32_t     MmHubPadding[8]; // SMU internal use
+} SmuMetrics_t;
+
+
+typedef struct {
+  uint16_t avgPsmCount[76];
+  uint16_t minPsmCount[76];
+  float    avgPsmVoltage[76];
+  float    minPsmVoltage[76];
+
+  uint32_t MmHubPadding[8]; // SMU internal use
+} AvfsDebugTable_t;
+
+// These defines are used with the following messages:
+// SMC_MSG_TransferTableDram2Smu
+// SMC_MSG_TransferTableSmu2Dram
+#define TABLE_PPTABLE                 0
+#define TABLE_AVFS_PSM_DEBUG          1
+#define TABLE_AVFS_FUSE_OVERRIDE      2
+#define TABLE_PMSTATUSLOG             3
+#define TABLE_SMU_METRICS             4
+#define TABLE_DRIVER_SMU_CONFIG       5
+#define TABLE_I2C_COMMANDS            6
+#define TABLE_COUNT                   7
+
+#endif