diff options
| author | Maxime Ripard <maxime@cerno.tech> | 2022-06-29 14:34:37 +0200 |
|---|---|---|
| committer | Maxime Ripard <maxime@cerno.tech> | 2022-07-08 10:45:41 +0200 |
| commit | 53565c28e6af2cef6bbf438c34250135e3564459 (patch) | |
| tree | 4bf571e53904246d772d1630dea84a4d9553eef1 /drivers/gpu/drm/vc4/vc4_hdmi.c | |
| parent | f1bc386b319e93e56453ae27e9e83817bb1f6f95 (diff) | |
| download | linux-53565c28e6af2cef6bbf438c34250135e3564459.tar.bz2 | |
drm/vc4: hdmi: Rework power up
The current code tries to handle the case where CONFIG_PM isn't selected
by first calling our runtime_resume implementation and then properly
report the power state to the runtime_pm core.
This allows to have a functionning device even if pm_runtime_get_*
functions are nops.
However, the device power state if CONFIG_PM is enabled is
RPM_SUSPENDED, and thus our vc4_hdmi_write() and vc4_hdmi_read() calls
in the runtime_pm hooks will now report a warning since the device might
not be properly powered.
Even more so, we need CONFIG_PM enabled since the previous RaspberryPi
have a power domain that needs to be powered up for the HDMI controller
to be usable.
The previous patch has created a dependency on CONFIG_PM, now we can
just assume it's there and only call pm_runtime_resume_and_get() to make
sure our device is powered in bind.
Link: https://lore.kernel.org/r/20220629123510.1915022-39-maxime@cerno.tech
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Diffstat (limited to 'drivers/gpu/drm/vc4/vc4_hdmi.c')
| -rw-r--r-- | drivers/gpu/drm/vc4/vc4_hdmi.c | 15 |
1 files changed, 7 insertions, 8 deletions
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index 4a2e24421089..e77bdc37b16f 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -2971,17 +2971,15 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) vc4_hdmi->disable_4kp60 = true; } + pm_runtime_enable(dev); + /* - * We need to have the device powered up at this point to call - * our reset hook and for the CEC init. + * We need to have the device powered up at this point to call + * our reset hook and for the CEC init. */ - ret = vc4_hdmi_runtime_resume(dev); + ret = pm_runtime_resume_and_get(dev); if (ret) - goto err_put_ddc; - - pm_runtime_get_noresume(dev); - pm_runtime_set_active(dev); - pm_runtime_enable(dev); + goto err_disable_runtime_pm; if ((of_device_is_compatible(dev->of_node, "brcm,bcm2711-hdmi0") || of_device_is_compatible(dev->of_node, "brcm,bcm2711-hdmi1")) && @@ -3027,6 +3025,7 @@ err_destroy_conn: err_destroy_encoder: drm_encoder_cleanup(encoder); pm_runtime_put_sync(dev); +err_disable_runtime_pm: pm_runtime_disable(dev); err_put_ddc: put_device(&vc4_hdmi->ddc->dev); |