drm/msm: Add SDM845 DPU support

SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a
top level wrapper consisting of Display Processing Unit (DPU) and
display peripheral modules such as Display Serial Interface (DSI)
and DisplayPort (DP).

MDSS functions essentially as a back-end composition engine. It blends
video and graphic images stored in the frame buffers and scans out the
composed image to a display sink (over DSI/DP).

The following diagram represents hardware blocks for a simple pipeline
(two planes are present on a given crtc which is connected to a DSI
connector):

       MDSS
      +---------------------------------+
      | +-----------------------------+ |
      | | DPU                         | |
      | |  +--------+  +--------+     | |
      | |  |  SSPP  |  |  SSPP  |     | |
      | |  +----+---+  +----+---+     | |
      | |       |           |         | |
      | |  +----v-----------v---+     | |
      | |  |  Layer Mixer (LM)  |     | |
      | |  +--------------------+     | |
      | |  +--------------------+     | |
      | |  |    PingPong (PP)   |     | |
      | |  +--------------------+     | |
      | |  +--------------------+     | |
      | |  |  INTERFACE (VIDEO) |     | |
      | |  +---+----------------+     | |
      | +------|----------------------+ |
      |        |                        |
      | +------|---------------------+  |
      | |      | DISPLAY PERIPHERALS |  |
      | |  +---v-+      +-----+      |  |
      | |  | DSI |      |  DP |      |  |
      | |  +-----+      +-----+      |  |
      | +----------------------------+  |
      +---------------------------------+

The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs)
depends on SoC capabilities.

Overview of DPU sub-blocks:
---------------------------
* Source Surface Processor (SSPP):
 Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are
 capable of performing format conversion, scaling and quality improvement
 for source surfaces.

* Layer Mixer (LM):
 Blend source surfaces together (in requested zorder)

* PingPong (PP):
 This block controls frame done interrupt output, EOL and EOF generation,
 overflow/underflow control.

* Display interface (INTF):
 Timing generator and interface connecting the display peripherals.

DRM components mapping to DPU architecture:
------------------------------------------
PLANEs maps to SSPPs
CRTC maps to LMs
Encoder maps to PPs, INTFs

Data flow setup:
---------------
MDSS hardware can support various data flows (e.g.):
  - Dual pipe: Output from two LMs combined to single display.
  - Split display: Output from two LMs connected to two separate
                   interfaces.

The hardware capabilities determine the number of concurrent data paths
possible. Any control path (i.e. pipeline w/i DPU) can be routed to any
of the hardware data paths. A given control path can be triggered,
flushed and controlled independently.

Changes in v3:
- Move msm_media_info.h from uapi to dpu/ subdir
- Remove preclose callback dpu (it's handled in core)
- Fix kbuild warnings with parent_ops
- Remove unused functions from dpu_core_irq
- Rename mdss_phys to mdss
- Rename mdp_phys address space to mdp
- Drop _phys from vbif and regdma binding names

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[robclark minor rebase]
Signed-off-by: Rob Clark <robdclark@gmail.com>

1 files changed, 136 insertions, 0 deletions

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.h
new file mode 100644
index 000000000000..b55bfd13e296
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.h
@@ -0,0 +1,136 @@
+/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DPU_FORMATS_H
+#define _DPU_FORMATS_H
+
+#include <drm/drm_fourcc.h>
+#include "msm_gem.h"
+#include "dpu_hw_mdss.h"
+
+/**
+ * dpu_get_dpu_format_ext() - Returns dpu format structure pointer.
+ * @format:          DRM FourCC Code
+ * @modifiers:       format modifier array from client, one per plane
+ */
+const struct dpu_format *dpu_get_dpu_format_ext(
+		const uint32_t format,
+		const uint64_t modifier);
+
+#define dpu_get_dpu_format(f) dpu_get_dpu_format_ext(f, 0)
+
+/**
+ * dpu_get_msm_format - get an dpu_format by its msm_format base
+ *                     callback function registers with the msm_kms layer
+ * @kms:             kms driver
+ * @format:          DRM FourCC Code
+ * @modifiers:       data layout modifier
+ */
+const struct msm_format *dpu_get_msm_format(
+		struct msm_kms *kms,
+		const uint32_t format,
+		const uint64_t modifiers);
+
+/**
+ * dpu_populate_formats - populate the given array with fourcc codes supported
+ * @format_list:       pointer to list of possible formats
+ * @pixel_formats:     array to populate with fourcc codes
+ * @pixel_modifiers:   array to populate with drm modifiers, can be NULL
+ * @pixel_formats_max: length of pixel formats array
+ * Return: number of elements populated
+ */
+uint32_t dpu_populate_formats(
+		const struct dpu_format_extended *format_list,
+		uint32_t *pixel_formats,
+		uint64_t *pixel_modifiers,
+		uint32_t pixel_formats_max);
+
+/**
+ * dpu_format_get_plane_sizes - calculate size and layout of given buffer format
+ * @fmt:             pointer to dpu_format
+ * @w:               width of the buffer
+ * @h:               height of the buffer
+ * @layout:          layout of the buffer
+ * @pitches:         array of size [DPU_MAX_PLANES] to populate
+ *		     pitch for each plane
+ *
+ * Return: size of the buffer
+ */
+int dpu_format_get_plane_sizes(
+		const struct dpu_format *fmt,
+		const uint32_t w,
+		const uint32_t h,
+		struct dpu_hw_fmt_layout *layout,
+		const uint32_t *pitches);
+
+/**
+ * dpu_format_get_block_size - get block size of given format when
+ *	operating in block mode
+ * @fmt:             pointer to dpu_format
+ * @w:               pointer to width of the block
+ * @h:               pointer to height of the block
+ *
+ * Return: 0 if success; error oode otherwise
+ */
+int dpu_format_get_block_size(const struct dpu_format *fmt,
+		uint32_t *w, uint32_t *h);
+
+/**
+ * dpu_format_check_modified_format - validate format and buffers for
+ *                   dpu non-standard, i.e. modified format
+ * @kms:             kms driver
+ * @msm_fmt:         pointer to the msm_fmt base pointer of an dpu_format
+ * @cmd:             fb_cmd2 structure user request
+ * @bos:             gem buffer object list
+ *
+ * Return: error code on failure, 0 on success
+ */
+int dpu_format_check_modified_format(
+		const struct msm_kms *kms,
+		const struct msm_format *msm_fmt,
+		const struct drm_mode_fb_cmd2 *cmd,
+		struct drm_gem_object **bos);
+
+/**
+ * dpu_format_populate_layout - populate the given format layout based on
+ *                     mmu, fb, and format found in the fb
+ * @aspace:            address space pointer
+ * @fb:                framebuffer pointer
+ * @fmtl:              format layout structure to populate
+ *
+ * Return: error code on failure, -EAGAIN if success but the addresses
+ *         are the same as before or 0 if new addresses were populated
+ */
+int dpu_format_populate_layout(
+		struct msm_gem_address_space *aspace,
+		struct drm_framebuffer *fb,
+		struct dpu_hw_fmt_layout *fmtl);
+
+/**
+ * dpu_format_get_framebuffer_size - get framebuffer memory size
+ * @format:            DRM pixel format
+ * @width:             pixel width
+ * @height:            pixel height
+ * @pitches:           array of size [DPU_MAX_PLANES] to populate
+ *		       pitch for each plane
+ * @modifiers:         drm modifier
+ *
+ * Return: memory size required for frame buffer
+ */
+uint32_t dpu_format_get_framebuffer_size(
+		const uint32_t format,
+		const uint32_t width,
+		const uint32_t height,
+		const uint32_t *pitches,
+		const uint64_t modifiers);
+
+#endif /*_DPU_FORMATS_H */