Merge tag 'drm-intel-next-2016-11-08' of git://anongit.freedesktop.org/git/drm-intel into drm-next

- gpu idling rework for s/r (Imre)
- vlv mappable scanout fix
- speed up probing in resume (Lyude)
- dp audio workarounds for gen9 (Dhinakaran)
- more conversion to using dev_priv internally (Ville)
- more gen9+ wm fixes and cleanups (Maarten)
- shrinker cleanup&fixes (Chris)
- reorg plane init code (Ville)
- implement support for multiple timelines (prep work for scheduler)
  from Chris and all
- untangle dev->struct_mutex locking as prep for multiple timelines
  (Chris)
- refactor bxt phy code and collect it all in intel_dpio_phy.c (Ander)
- another gvt with bugfixes all over from Zhenyu
- piles of lspcon fixes from Imre
- 90/270 rotation fixes (Ville)
- guc log buffer support (Akash+Sagar)
- fbc fixes from Paulo
- untangle rpm vs. tiling-fences/mmaps (Chris)
- fix atomic commit to wait on the right fences (Daniel Stone)

* tag 'drm-intel-next-2016-11-08' of git://anongit.freedesktop.org/git/drm-intel: (181 commits)
  drm/i915: Update DRIVER_DATE to 20161108
  drm/i915: Mark CPU cache as dirty when used for rendering
  drm/i915: Add assert for no pending GPU requests during suspend/resume in LR mode
  drm/i915: Make sure engines are idle during GPU idling in LR mode
  drm/i915: Avoid early GPU idling due to race with new request
  drm/i915: Avoid early GPU idling due to already pending idle work
  drm/i915: Limit Valleyview and earlier to only using mappable scanout
  drm/i915: Round tile chunks up for constructing partial VMAs
  drm/i915: Remove the vma from the object list upon close
  drm/i915: Reinit polling before hpd when resuming
  drm/i915: Remove redundant reprobe in i915_drm_resume
  drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms
  drm/i915/dp: BDW cdclk fix for DP audio
  drm/i915: Fix pages pin counting around swizzle quirk
  drm/i915: Fix test on inputs for vma_compare()
  drm/i915/guc: Cache the client mapping
  drm/i915: Tidy slab cache allocations
  drm/i915: Introduce HAS_64BIT_RELOC
  drm/i915: Show the execlist queue in debugfs/i915_engine_info
  drm/i915: Unify global_list into global_link
  ...

1 files changed, 80 insertions, 2 deletions

diff --git a/drivers/gpu/drm/i915/intel_guc_fwif.h b/drivers/gpu/drm/i915/intel_guc_fwif.h
index e40db2d2ae99..324ea902558b 100644
--- a/drivers/gpu/drm/i915/intel_guc_fwif.h
+++ b/drivers/gpu/drm/i915/intel_guc_fwif.h
@@ -104,9 +104,9 @@
 #define   GUC_LOG_ALLOC_IN_MEGABYTE	(1 << 3)
 #define   GUC_LOG_CRASH_PAGES		1
 #define   GUC_LOG_CRASH_SHIFT		4
-#define   GUC_LOG_DPC_PAGES		3
+#define   GUC_LOG_DPC_PAGES		7
 #define   GUC_LOG_DPC_SHIFT		6
-#define   GUC_LOG_ISR_PAGES		3
+#define   GUC_LOG_ISR_PAGES		7
 #define   GUC_LOG_ISR_SHIFT		9
 #define   GUC_LOG_BUF_ADDR_SHIFT	12
 
@@ -419,15 +419,87 @@ struct guc_ads {
 	u32 reserved2[4];
 } __packed;
 
+/* GuC logging structures */
+
+enum guc_log_buffer_type {
+	GUC_ISR_LOG_BUFFER,
+	GUC_DPC_LOG_BUFFER,
+	GUC_CRASH_DUMP_LOG_BUFFER,
+	GUC_MAX_LOG_BUFFER
+};
+
+/**
+ * DOC: GuC Log buffer Layout
+ *
+ * Page0  +-------------------------------+
+ *        |   ISR state header (32 bytes) |
+ *        |      DPC state header         |
+ *        |   Crash dump state header     |
+ * Page1  +-------------------------------+
+ *        |           ISR logs            |
+ * Page9  +-------------------------------+
+ *        |           DPC logs            |
+ * Page17 +-------------------------------+
+ *        |         Crash Dump logs       |
+ *        +-------------------------------+
+ *
+ * Below state structure is used for coordination of retrieval of GuC firmware
+ * logs. Separate state is maintained for each log buffer type.
+ * read_ptr points to the location where i915 read last in log buffer and
+ * is read only for GuC firmware. write_ptr is incremented by GuC with number
+ * of bytes written for each log entry and is read only for i915.
+ * When any type of log buffer becomes half full, GuC sends a flush interrupt.
+ * GuC firmware expects that while it is writing to 2nd half of the buffer,
+ * first half would get consumed by Host and then get a flush completed
+ * acknowledgment from Host, so that it does not end up doing any overwrite
+ * causing loss of logs. So when buffer gets half filled & i915 has requested
+ * for interrupt, GuC will set flush_to_file field, set the sampled_write_ptr
+ * to the value of write_ptr and raise the interrupt.
+ * On receiving the interrupt i915 should read the buffer, clear flush_to_file
+ * field and also update read_ptr with the value of sample_write_ptr, before
+ * sending an acknowledgment to GuC. marker & version fields are for internal
+ * usage of GuC and opaque to i915. buffer_full_cnt field is incremented every
+ * time GuC detects the log buffer overflow.
+ */
+struct guc_log_buffer_state {
+	u32 marker[2];
+	u32 read_ptr;
+	u32 write_ptr;
+	u32 size;
+	u32 sampled_write_ptr;
+	union {
+		struct {
+			u32 flush_to_file:1;
+			u32 buffer_full_cnt:4;
+			u32 reserved:27;
+		};
+		u32 flags;
+	};
+	u32 version;
+} __packed;
+
+union guc_log_control {
+	struct {
+		u32 logging_enabled:1;
+		u32 reserved1:3;
+		u32 verbosity:4;
+		u32 reserved2:24;
+	};
+	u32 value;
+} __packed;
+
 /* This Action will be programmed in C180 - SOFT_SCRATCH_O_REG */
 enum host2guc_action {
 	HOST2GUC_ACTION_DEFAULT = 0x0,
 	HOST2GUC_ACTION_SAMPLE_FORCEWAKE = 0x6,
 	HOST2GUC_ACTION_ALLOCATE_DOORBELL = 0x10,
 	HOST2GUC_ACTION_DEALLOCATE_DOORBELL = 0x20,
+	HOST2GUC_ACTION_LOG_BUFFER_FILE_FLUSH_COMPLETE = 0x30,
+	HOST2GUC_ACTION_FORCE_LOG_BUFFER_FLUSH = 0x302,
 	HOST2GUC_ACTION_ENTER_S_STATE = 0x501,
 	HOST2GUC_ACTION_EXIT_S_STATE = 0x502,
 	HOST2GUC_ACTION_SLPC_REQUEST = 0x3003,
+	HOST2GUC_ACTION_UK_LOG_ENABLE_LOGGING = 0x0E000,
 	HOST2GUC_ACTION_LIMIT
 };
 
@@ -449,4 +521,10 @@ enum guc2host_status {
 	GUC2HOST_STATUS_GENERIC_FAIL = GUC2HOST_STATUS(0x0000F000)
 };
 
+/* This action will be programmed in C1BC - SOFT_SCRATCH_15_REG */
+enum guc2host_message {
+	GUC2HOST_MSG_CRASH_DUMP_POSTED = (1 << 1),
+	GUC2HOST_MSG_FLUSH_LOG_BUFFER = (1 << 3)
+};
+
 #endif