Merge tag 'drm-intel-next-2018-11-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Changes outside i915:
- Connector property to limit max bpc (Radhakrishna)
- Fix LPE audio runtime PM and deinit (Ville)
- DP FEC prep work (Anusha)
- Mark pinned shmemfs pages as unevictable (Kuo-Hsin)
- Backmerge drm-next (Jani)

Inside i915:
- Revert OA UAPI change that lacks userspace (Joonas)
- Register macro cleanup (Jani)
- 32-bit build fixes on pin flags (Chris)
- Fix MG DP mode and PHY gating for HDMI (Imre)
- DP MST race, hpd and irq fixes (Lyude)
- Combo PHY fixes and cleanup (Imre, Lucas)
- Move display init and cleanup under modeset init and cleanup (José)
- PSR fixes (José)
- Subslice size fixes (Daniele)
- Abstract and clean up fixed point helpers (Jani)
- Plane input CSC for YUV to RGB conversion (Uma)
- Break long iterations for get/put shmemfs pages (Chris)
- Improve DDI encoder hw state readout sanity checks (Imre)
- Fix power well leaks for MST (José)
- Scaler fixes (Ville)
- Watermark fixes (Ville)
- Fix VLV/CHV DSI panel orientation readout (Ville)
- ICL rawclock fixes (Paulo)
- Workaround DMC power well request issues (Imre)
- Plane allocation fix (Maarten)
- Transcoder enum value/ordering robustness fixes (Imre)
- UTS_RELEASE build dependency fix (Hans Holmberg)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87k1l4cesj.fsf@intel.com

1 files changed, 264 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_connector.c b/drivers/gpu/drm/i915/intel_connector.c
new file mode 100644
index 000000000000..18e370f607bc
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_connector.c
@@ -0,0 +1,264 @@
+/*
+ * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (c) 2007, 2010 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drmP.h>
+#include "intel_drv.h"
+#include "i915_drv.h"
+
+int intel_connector_init(struct intel_connector *connector)
+{
+	struct intel_digital_connector_state *conn_state;
+
+	/*
+	 * Allocate enough memory to hold intel_digital_connector_state,
+	 * This might be a few bytes too many, but for connectors that don't
+	 * need it we'll free the state and allocate a smaller one on the first
+	 * successful commit anyway.
+	 */
+	conn_state = kzalloc(sizeof(*conn_state), GFP_KERNEL);
+	if (!conn_state)
+		return -ENOMEM;
+
+	__drm_atomic_helper_connector_reset(&connector->base,
+					    &conn_state->base);
+
+	return 0;
+}
+
+struct intel_connector *intel_connector_alloc(void)
+{
+	struct intel_connector *connector;
+
+	connector = kzalloc(sizeof(*connector), GFP_KERNEL);
+	if (!connector)
+		return NULL;
+
+	if (intel_connector_init(connector) < 0) {
+		kfree(connector);
+		return NULL;
+	}
+
+	return connector;
+}
+
+/*
+ * Free the bits allocated by intel_connector_alloc.
+ * This should only be used after intel_connector_alloc has returned
+ * successfully, and before drm_connector_init returns successfully.
+ * Otherwise the destroy callbacks for the connector and the state should
+ * take care of proper cleanup/free (see intel_connector_destroy).
+ */
+void intel_connector_free(struct intel_connector *connector)
+{
+	kfree(to_intel_digital_connector_state(connector->base.state));
+	kfree(connector);
+}
+
+/*
+ * Connector type independent destroy hook for drm_connector_funcs.
+ */
+void intel_connector_destroy(struct drm_connector *connector)
+{
+	struct intel_connector *intel_connector = to_intel_connector(connector);
+
+	kfree(intel_connector->detect_edid);
+
+	if (!IS_ERR_OR_NULL(intel_connector->edid))
+		kfree(intel_connector->edid);
+
+	intel_panel_fini(&intel_connector->panel);
+
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+int intel_connector_register(struct drm_connector *connector)
+{
+	struct intel_connector *intel_connector = to_intel_connector(connector);
+	int ret;
+
+	ret = intel_backlight_device_register(intel_connector);
+	if (ret)
+		goto err;
+
+	if (i915_inject_load_failure()) {
+		ret = -EFAULT;
+		goto err_backlight;
+	}
+
+	return 0;
+
+err_backlight:
+	intel_backlight_device_unregister(intel_connector);
+err:
+	return ret;
+}
+
+void intel_connector_unregister(struct drm_connector *connector)
+{
+	struct intel_connector *intel_connector = to_intel_connector(connector);
+
+	intel_backlight_device_unregister(intel_connector);
+}
+
+void intel_connector_attach_encoder(struct intel_connector *connector,
+				    struct intel_encoder *encoder)
+{
+	connector->encoder = encoder;
+	drm_connector_attach_encoder(&connector->base, &encoder->base);
+}
+
+/*
+ * Simple connector->get_hw_state implementation for encoders that support only
+ * one connector and no cloning and hence the encoder state determines the state
+ * of the connector.
+ */
+bool intel_connector_get_hw_state(struct intel_connector *connector)
+{
+	enum pipe pipe = 0;
+	struct intel_encoder *encoder = connector->encoder;
+
+	return encoder->get_hw_state(encoder, &pipe);
+}
+
+enum pipe intel_connector_get_pipe(struct intel_connector *connector)
+{
+	struct drm_device *dev = connector->base.dev;
+
+	WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
+
+	if (!connector->base.state->crtc)
+		return INVALID_PIPE;
+
+	return to_intel_crtc(connector->base.state->crtc)->pipe;
+}
+
+/**
+ * intel_connector_update_modes - update connector from edid
+ * @connector: DRM connector device to use
+ * @edid: previously read EDID information
+ */
+int intel_connector_update_modes(struct drm_connector *connector,
+				struct edid *edid)
+{
+	int ret;
+
+	drm_connector_update_edid_property(connector, edid);
+	ret = drm_add_edid_modes(connector, edid);
+
+	return ret;
+}
+
+/**
+ * intel_ddc_get_modes - get modelist from monitor
+ * @connector: DRM connector device to use
+ * @adapter: i2c adapter
+ *
+ * Fetch the EDID information from @connector using the DDC bus.
+ */
+int intel_ddc_get_modes(struct drm_connector *connector,
+			struct i2c_adapter *adapter)
+{
+	struct edid *edid;
+	int ret;
+
+	edid = drm_get_edid(connector, adapter);
+	if (!edid)
+		return 0;
+
+	ret = intel_connector_update_modes(connector, edid);
+	kfree(edid);
+
+	return ret;
+}
+
+static const struct drm_prop_enum_list force_audio_names[] = {
+	{ HDMI_AUDIO_OFF_DVI, "force-dvi" },
+	{ HDMI_AUDIO_OFF, "off" },
+	{ HDMI_AUDIO_AUTO, "auto" },
+	{ HDMI_AUDIO_ON, "on" },
+};
+
+void
+intel_attach_force_audio_property(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct drm_property *prop;
+
+	prop = dev_priv->force_audio_property;
+	if (prop == NULL) {
+		prop = drm_property_create_enum(dev, 0,
+					   "audio",
+					   force_audio_names,
+					   ARRAY_SIZE(force_audio_names));
+		if (prop == NULL)
+			return;
+
+		dev_priv->force_audio_property = prop;
+	}
+	drm_object_attach_property(&connector->base, prop, 0);
+}
+
+static const struct drm_prop_enum_list broadcast_rgb_names[] = {
+	{ INTEL_BROADCAST_RGB_AUTO, "Automatic" },
+	{ INTEL_BROADCAST_RGB_FULL, "Full" },
+	{ INTEL_BROADCAST_RGB_LIMITED, "Limited 16:235" },
+};
+
+void
+intel_attach_broadcast_rgb_property(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct drm_property *prop;
+
+	prop = dev_priv->broadcast_rgb_property;
+	if (prop == NULL) {
+		prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM,
+					   "Broadcast RGB",
+					   broadcast_rgb_names,
+					   ARRAY_SIZE(broadcast_rgb_names));
+		if (prop == NULL)
+			return;
+
+		dev_priv->broadcast_rgb_property = prop;
+	}
+
+	drm_object_attach_property(&connector->base, prop, 0);
+}
+
+void
+intel_attach_aspect_ratio_property(struct drm_connector *connector)
+{
+	if (!drm_mode_create_aspect_ratio_property(connector->dev))
+		drm_object_attach_property(&connector->base,
+			connector->dev->mode_config.aspect_ratio_property,
+			DRM_MODE_PICTURE_ASPECT_NONE);
+}