drm/i915: Perform automated conversions for crtc uapi/hw split, base -> hw.

Split up crtc_state->base to hw where appropriate. This is done using the following patch:

@@
struct intel_crtc_state *T;
identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$";
@@
-T->base.x
+T->hw.x

@@
struct drm_crtc_state *T;
identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$";
@@
-to_intel_crtc_state(T)->base.x
+to_intel_crtc_state(T)->hw.x

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-4-maarten.lankhorst@linux.intel.com

1 files changed, 6 insertions, 6 deletions

diff --git a/drivers/gpu/drm/i915/display/intel_dvo.c b/drivers/gpu/drm/i915/display/intel_dvo.c
index bcfbcb743e7d..e45da2216e06 100644
--- a/drivers/gpu/drm/i915/display/intel_dvo.c
+++ b/drivers/gpu/drm/i915/display/intel_dvo.c
@@ -178,9 +178,9 @@ static void intel_dvo_get_config(struct intel_encoder *encoder,
 	else
 		flags |= DRM_MODE_FLAG_NVSYNC;
 
-	pipe_config->base.adjusted_mode.flags |= flags;
+	pipe_config->hw.adjusted_mode.flags |= flags;
 
-	pipe_config->base.adjusted_mode.crtc_clock = pipe_config->port_clock;
+	pipe_config->hw.adjusted_mode.crtc_clock = pipe_config->port_clock;
 }
 
 static void intel_disable_dvo(struct intel_encoder *encoder,
@@ -207,8 +207,8 @@ static void intel_enable_dvo(struct intel_encoder *encoder,
 	u32 temp = I915_READ(dvo_reg);
 
 	intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev,
-					 &pipe_config->base.mode,
-					 &pipe_config->base.adjusted_mode);
+					 &pipe_config->hw.mode,
+					 &pipe_config->hw.adjusted_mode);
 
 	I915_WRITE(dvo_reg, temp | DVO_ENABLE);
 	I915_READ(dvo_reg);
@@ -253,7 +253,7 @@ static int intel_dvo_compute_config(struct intel_encoder *encoder,
 	struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 	const struct drm_display_mode *fixed_mode =
 		intel_dvo->attached_connector->panel.fixed_mode;
-	struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
+	struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
 
 	/*
 	 * If we have timings from the BIOS for the panel, put them in
@@ -278,7 +278,7 @@ static void intel_dvo_pre_enable(struct intel_encoder *encoder,
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
-	const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
+	const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
 	struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 	enum pipe pipe = crtc->pipe;
 	u32 dvo_val;