summaryrefslogtreecommitdiffstats
path: root/drivers/extcon
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-04-21 09:42:58 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2015-04-21 09:42:58 -0700
commit1fc149933fd49a5b0e7738dc0853dbfbac4ae0e1 (patch)
treedfe99751c21aaf39e49765379d0b9b32114c757d /drivers/extcon
parent41d5e08ea86af3359239d5a6f7021cdc61beaa49 (diff)
parentea5505fabd3b59608750bfd3721d0f8bc5c8b0bb (diff)
downloadlinux-1fc149933fd49a5b0e7738dc0853dbfbac4ae0e1.tar.bz2
Merge tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver patchset for 4.1-rc1. Lots of different driver subsystem updates here, nothing major, full details are in the shortlog. All of this has been in linux-next for a while" * tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (133 commits) mei: trace: remove unused TRACE_SYSTEM_STRING DTS: ARM: OMAP3-N900: Add lis3lv02d support Documentation: DT: lis302: update wakeup binding lis3lv02d: DT: add wakeup unit 2 and wakeup threshold lis3lv02d: DT: use s32 to support negative values Drivers: hv: hv_balloon: correctly handle num_pages>INT_MAX case Drivers: hv: hv_balloon: correctly handle val.freeram<num_pages case mei: replace check for connection instead of transitioning mei: use mei_cl_is_connected consistently mei: fix mei_poll operation hv_vmbus: Add gradually increased delay for retries in vmbus_post_msg() Drivers: hv: hv_balloon: survive ballooning request with num_pages=0 Drivers: hv: hv_balloon: eliminate jumps in piecewiese linear floor function Drivers: hv: hv_balloon: do not online pages in offline blocks hv: remove the per-channel workqueue hv: don't schedule new works in vmbus_onoffer()/vmbus_onoffer_rescind() hv: run non-blocking message handlers in the dispatch tasklet coresight: moving to new "hwtracing" directory coresight-tmc: Adding a status interface to sysfs coresight: remove the unnecessary configuration coresight-default-sink ...
Diffstat (limited to 'drivers/extcon')
-rw-r--r--drivers/extcon/Kconfig17
-rw-r--r--drivers/extcon/Makefile4
-rw-r--r--drivers/extcon/extcon-arizona.c49
-rw-r--r--drivers/extcon/extcon-max14577.c5
-rw-r--r--drivers/extcon/extcon-max77693.c37
-rw-r--r--drivers/extcon/extcon-max77843.c881
-rw-r--r--drivers/extcon/extcon-max8997.c5
-rw-r--r--drivers/extcon/extcon-rt8973a.c6
-rw-r--r--drivers/extcon/extcon-sm5502.c6
-rw-r--r--drivers/extcon/extcon-usb-gpio.c237
-rw-r--r--drivers/extcon/extcon.c (renamed from drivers/extcon/extcon-class.c)36
11 files changed, 1227 insertions, 56 deletions
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index 6a1f7de6fa54..fdc0bf0543ce 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -55,6 +55,16 @@ config EXTCON_MAX77693
Maxim MAX77693 PMIC. The MAX77693 MUIC is a USB port accessory
detector and switch.
+config EXTCON_MAX77843
+ tristate "MAX77843 EXTCON Support"
+ depends on MFD_MAX77843
+ select IRQ_DOMAIN
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the MUIC device of
+ Maxim MAX77843. The MAX77843 MUIC is a USB port accessory
+ detector add switch.
+
config EXTCON_MAX8997
tristate "MAX8997 EXTCON Support"
depends on MFD_MAX8997 && IRQ_DOMAIN
@@ -93,4 +103,11 @@ config EXTCON_SM5502
Silicon Mitus SM5502. The SM5502 is a USB port accessory
detector and switch.
+config EXTCON_USB_GPIO
+ tristate "USB GPIO extcon support"
+ depends on GPIOLIB
+ help
+ Say Y here to enable GPIO based USB cable detection extcon support.
+ Used typically if GPIO is used for USB ID pin detection.
+
endif # MULTISTATE_SWITCH
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index 0370b42e5a27..9204114791a3 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -2,13 +2,15 @@
# Makefile for external connector class (extcon) devices
#
-obj-$(CONFIG_EXTCON) += extcon-class.o
+obj-$(CONFIG_EXTCON) += extcon.o
obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o
obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o
obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o
obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o
+obj-$(CONFIG_EXTCON_MAX77843) += extcon-max77843.o
obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o
obj-$(CONFIG_EXTCON_PALMAS) += extcon-palmas.o
obj-$(CONFIG_EXTCON_RT8973A) += extcon-rt8973a.o
obj-$(CONFIG_EXTCON_SM5502) += extcon-sm5502.o
+obj-$(CONFIG_EXTCON_USB_GPIO) += extcon-usb-gpio.o
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 6b5e795f3fe2..a0ed35b336e4 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -136,18 +136,35 @@ static const char *arizona_cable[] = {
static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info);
-static void arizona_extcon_do_magic(struct arizona_extcon_info *info,
- unsigned int magic)
+static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
+ bool clamp)
{
struct arizona *arizona = info->arizona;
+ unsigned int mask = 0, val = 0;
int ret;
+ switch (arizona->type) {
+ case WM5110:
+ mask = ARIZONA_HP1L_SHRTO | ARIZONA_HP1L_FLWR |
+ ARIZONA_HP1L_SHRTI;
+ if (clamp)
+ val = ARIZONA_HP1L_SHRTO;
+ else
+ val = ARIZONA_HP1L_FLWR | ARIZONA_HP1L_SHRTI;
+ break;
+ default:
+ mask = ARIZONA_RMV_SHRT_HP1L;
+ if (clamp)
+ val = ARIZONA_RMV_SHRT_HP1L;
+ break;
+ };
+
mutex_lock(&arizona->dapm->card->dapm_mutex);
- arizona->hpdet_magic = magic;
+ arizona->hpdet_clamp = clamp;
- /* Keep the HP output stages disabled while doing the magic */
- if (magic) {
+ /* Keep the HP output stages disabled while doing the clamp */
+ if (clamp) {
ret = regmap_update_bits(arizona->regmap,
ARIZONA_OUTPUT_ENABLES_1,
ARIZONA_OUT1L_ENA |
@@ -158,20 +175,20 @@ static void arizona_extcon_do_magic(struct arizona_extcon_info *info,
ret);
}
- ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000,
- magic);
+ ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1L,
+ mask, val);
if (ret != 0)
- dev_warn(arizona->dev, "Failed to do magic: %d\n",
+ dev_warn(arizona->dev, "Failed to do clamp: %d\n",
ret);
- ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000,
- magic);
+ ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1R,
+ mask, val);
if (ret != 0)
- dev_warn(arizona->dev, "Failed to do magic: %d\n",
+ dev_warn(arizona->dev, "Failed to do clamp: %d\n",
ret);
- /* Restore the desired state while not doing the magic */
- if (!magic) {
+ /* Restore the desired state while not doing the clamp */
+ if (!clamp) {
ret = regmap_update_bits(arizona->regmap,
ARIZONA_OUTPUT_ENABLES_1,
ARIZONA_OUT1L_ENA |
@@ -603,7 +620,7 @@ done:
ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
0);
- arizona_extcon_do_magic(info, 0);
+ arizona_extcon_hp_clamp(info, false);
if (id_gpio)
gpio_set_value_cansleep(id_gpio, 0);
@@ -648,7 +665,7 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info)
if (info->mic)
arizona_stop_mic(info);
- arizona_extcon_do_magic(info, 0x4000);
+ arizona_extcon_hp_clamp(info, true);
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
@@ -699,7 +716,7 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
info->hpdet_active = true;
- arizona_extcon_do_magic(info, 0x4000);
+ arizona_extcon_hp_clamp(info, true);
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c
index c1bf0cf747b0..3823aa4a3a80 100644
--- a/drivers/extcon/extcon-max14577.c
+++ b/drivers/extcon/extcon-max14577.c
@@ -539,8 +539,6 @@ static void max14577_muic_irq_work(struct work_struct *work)
dev_err(info->dev, "failed to handle MUIC interrupt\n");
mutex_unlock(&info->mutex);
-
- return;
}
/*
@@ -730,8 +728,7 @@ static int max14577_muic_probe(struct platform_device *pdev)
muic_irq->name, info);
if (ret) {
dev_err(&pdev->dev,
- "failed: irq request (IRQ: %d,"
- " error :%d)\n",
+ "failed: irq request (IRQ: %d, error :%d)\n",
muic_irq->irq, ret);
return ret;
}
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index af165fd0c6f5..a66bec8f6252 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -190,8 +190,8 @@ enum max77693_muic_acc_type {
/* The below accessories have same ADC value so ADCLow and
ADC1K bit is used to separate specific accessory */
/* ADC|VBVolot|ADCLow|ADC1K| */
- MAX77693_MUIC_GND_USB_OTG = 0x100, /* 0x0| 0| 0| 0| */
- MAX77693_MUIC_GND_USB_OTG_VB = 0x104, /* 0x0| 1| 0| 0| */
+ MAX77693_MUIC_GND_USB_HOST = 0x100, /* 0x0| 0| 0| 0| */
+ MAX77693_MUIC_GND_USB_HOST_VB = 0x104, /* 0x0| 1| 0| 0| */
MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* 0x0| 0| 1| 0| */
MAX77693_MUIC_GND_MHL = 0x103, /* 0x0| 0| 1| 1| */
MAX77693_MUIC_GND_MHL_VB = 0x107, /* 0x0| 1| 1| 1| */
@@ -228,7 +228,7 @@ static const char *max77693_extcon_cable[] = {
[EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger",
[EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream",
[EXTCON_CABLE_MHL] = "MHL",
- [EXTCON_CABLE_MHL_TA] = "MHL_TA",
+ [EXTCON_CABLE_MHL_TA] = "MHL-TA",
[EXTCON_CABLE_JIG_USB_ON] = "JIG-USB-ON",
[EXTCON_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
[EXTCON_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
@@ -403,8 +403,8 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
/**
* [0x1|VBVolt|ADCLow|ADC1K]
- * [0x1| 0| 0| 0] USB_OTG
- * [0x1| 1| 0| 0] USB_OTG_VB
+ * [0x1| 0| 0| 0] USB_HOST
+ * [0x1| 1| 0| 0] USB_HSOT_VB
* [0x1| 0| 1| 0] Audio Video cable with load
* [0x1| 0| 1| 1] MHL without charging cable
* [0x1| 1| 1| 1] MHL with charging cable
@@ -523,7 +523,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
* - Support charging and data connection through micro-usb port
* if USB cable is connected between target and host
* device.
- * - Support OTG device (Mouse/Keyboard)
+ * - Support OTG(On-The-Go) device (Ex: Mouse/Keyboard)
*/
ret = max77693_muic_set_path(info, info->path_usb, attached);
if (ret < 0)
@@ -609,9 +609,9 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
MAX77693_CABLE_GROUP_ADC_GND, &attached);
switch (cable_type_gnd) {
- case MAX77693_MUIC_GND_USB_OTG:
- case MAX77693_MUIC_GND_USB_OTG_VB:
- /* USB_OTG, PATH: AP_USB */
+ case MAX77693_MUIC_GND_USB_HOST:
+ case MAX77693_MUIC_GND_USB_HOST_VB:
+ /* USB_HOST, PATH: AP_USB */
ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
if (ret < 0)
return ret;
@@ -704,7 +704,7 @@ static int max77693_muic_adc_handler(struct max77693_muic_info *info)
switch (cable_type) {
case MAX77693_MUIC_ADC_GROUND:
- /* USB_OTG/MHL/Audio */
+ /* USB_HOST/MHL/Audio */
max77693_muic_adc_ground_handler(info);
break;
case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:
@@ -823,19 +823,19 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
case MAX77693_MUIC_GND_MHL:
case MAX77693_MUIC_GND_MHL_VB:
/*
- * MHL cable with MHL_TA(USB/TA) cable
+ * MHL cable with MHL-TA(USB/TA) cable
* - MHL cable include two port(HDMI line and separate
* micro-usb port. When the target connect MHL cable,
- * extcon driver check whether MHL_TA(USB/TA) cable is
- * connected. If MHL_TA cable is connected, extcon
+ * extcon driver check whether MHL-TA(USB/TA) cable is
+ * connected. If MHL-TA cable is connected, extcon
* driver notify state to notifiee for charging battery.
*
- * Features of 'MHL_TA(USB/TA) with MHL cable'
+ * Features of 'MHL-TA(USB/TA) with MHL cable'
* - Support MHL
* - Support charging through micro-usb port without
* data connection
*/
- extcon_set_cable_state(info->edev, "MHL_TA", attached);
+ extcon_set_cable_state(info->edev, "MHL-TA", attached);
if (!cable_attached)
extcon_set_cable_state(info->edev,
"MHL", cable_attached);
@@ -886,7 +886,7 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
* - Support charging and data connection through micro-
* usb port if USB cable is connected between target
* and host device
- * - Support OTG device (Mouse/Keyboard)
+ * - Support OTG(On-The-Go) device (Ex: Mouse/Keyboard)
*/
ret = max77693_muic_set_path(info, info->path_usb,
attached);
@@ -1019,8 +1019,6 @@ static void max77693_muic_irq_work(struct work_struct *work)
dev_err(info->dev, "failed to handle MUIC interrupt\n");
mutex_unlock(&info->mutex);
-
- return;
}
static irqreturn_t max77693_muic_irq_handler(int irq, void *data)
@@ -1171,8 +1169,7 @@ static int max77693_muic_probe(struct platform_device *pdev)
muic_irq->name, info);
if (ret) {
dev_err(&pdev->dev,
- "failed: irq request (IRQ: %d,"
- " error :%d)\n",
+ "failed: irq request (IRQ: %d, error :%d)\n",
muic_irq->irq, ret);
return ret;
}
diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
new file mode 100644
index 000000000000..8db6a926ea07
--- /dev/null
+++ b/drivers/extcon/extcon-max77843.c
@@ -0,0 +1,881 @@
+/*
+ * extcon-max77843.c - Maxim MAX77843 extcon driver to support
+ * MUIC(Micro USB Interface Controller)
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/extcon.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+#define DELAY_MS_DEFAULT 15000 /* unit: millisecond */
+
+enum max77843_muic_status {
+ MAX77843_MUIC_STATUS1 = 0,
+ MAX77843_MUIC_STATUS2,
+ MAX77843_MUIC_STATUS3,
+
+ MAX77843_MUIC_STATUS_NUM,
+};
+
+struct max77843_muic_info {
+ struct device *dev;
+ struct max77843 *max77843;
+ struct extcon_dev *edev;
+
+ struct mutex mutex;
+ struct work_struct irq_work;
+ struct delayed_work wq_detcable;
+
+ u8 status[MAX77843_MUIC_STATUS_NUM];
+ int prev_cable_type;
+ int prev_chg_type;
+ int prev_gnd_type;
+
+ bool irq_adc;
+ bool irq_chg;
+};
+
+enum max77843_muic_cable_group {
+ MAX77843_CABLE_GROUP_ADC = 0,
+ MAX77843_CABLE_GROUP_ADC_GND,
+ MAX77843_CABLE_GROUP_CHG,
+};
+
+enum max77843_muic_adc_debounce_time {
+ MAX77843_DEBOUNCE_TIME_5MS = 0,
+ MAX77843_DEBOUNCE_TIME_10MS,
+ MAX77843_DEBOUNCE_TIME_25MS,
+ MAX77843_DEBOUNCE_TIME_38_62MS,
+};
+
+/* Define accessory cable type */
+enum max77843_muic_accessory_type {
+ MAX77843_MUIC_ADC_GROUND = 0,
+ MAX77843_MUIC_ADC_SEND_END_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S1_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S2_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S3_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S4_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S5_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S6_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S7_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S8_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S9_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S10_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S11_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S12_BUTTON,
+ MAX77843_MUIC_ADC_RESERVED_ACC_1,
+ MAX77843_MUIC_ADC_RESERVED_ACC_2,
+ MAX77843_MUIC_ADC_RESERVED_ACC_3,
+ MAX77843_MUIC_ADC_RESERVED_ACC_4,
+ MAX77843_MUIC_ADC_RESERVED_ACC_5,
+ MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2,
+ MAX77843_MUIC_ADC_PHONE_POWERED_DEV,
+ MAX77843_MUIC_ADC_TTY_CONVERTER,
+ MAX77843_MUIC_ADC_UART_CABLE,
+ MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG,
+ MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF,
+ MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON,
+ MAX77843_MUIC_ADC_AV_CABLE_NOLOAD,
+ MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG,
+ MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF,
+ MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON,
+ MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1,
+ MAX77843_MUIC_ADC_OPEN,
+
+ /* The blow accessories should check
+ not only ADC value but also ADC1K and VBVolt value. */
+ /* Offset|ADC1K|VBVolt| */
+ MAX77843_MUIC_GND_USB_HOST = 0x100, /* 0x1| 0| 0| */
+ MAX77843_MUIC_GND_USB_HOST_VB = 0x101, /* 0x1| 0| 1| */
+ MAX77843_MUIC_GND_MHL = 0x102, /* 0x1| 1| 0| */
+ MAX77843_MUIC_GND_MHL_VB = 0x103, /* 0x1| 1| 1| */
+};
+
+/* Define charger cable type */
+enum max77843_muic_charger_type {
+ MAX77843_MUIC_CHG_NONE = 0,
+ MAX77843_MUIC_CHG_USB,
+ MAX77843_MUIC_CHG_DOWNSTREAM,
+ MAX77843_MUIC_CHG_DEDICATED,
+ MAX77843_MUIC_CHG_SPECIAL_500MA,
+ MAX77843_MUIC_CHG_SPECIAL_1A,
+ MAX77843_MUIC_CHG_SPECIAL_BIAS,
+ MAX77843_MUIC_CHG_RESERVED,
+ MAX77843_MUIC_CHG_GND,
+};
+
+enum {
+ MAX77843_CABLE_USB = 0,
+ MAX77843_CABLE_USB_HOST,
+ MAX77843_CABLE_TA,
+ MAX77843_CABLE_CHARGE_DOWNSTREAM,
+ MAX77843_CABLE_FAST_CHARGER,
+ MAX77843_CABLE_SLOW_CHARGER,
+ MAX77843_CABLE_MHL,
+ MAX77843_CABLE_MHL_TA,
+ MAX77843_CABLE_JIG_USB_ON,
+ MAX77843_CABLE_JIG_USB_OFF,
+ MAX77843_CABLE_JIG_UART_ON,
+ MAX77843_CABLE_JIG_UART_OFF,
+
+ MAX77843_CABLE_NUM,
+};
+
+static const char *max77843_extcon_cable[] = {
+ [MAX77843_CABLE_USB] = "USB",
+ [MAX77843_CABLE_USB_HOST] = "USB-HOST",
+ [MAX77843_CABLE_TA] = "TA",
+ [MAX77843_CABLE_CHARGE_DOWNSTREAM] = "CHARGER-DOWNSTREAM",
+ [MAX77843_CABLE_FAST_CHARGER] = "FAST-CHARGER",
+ [MAX77843_CABLE_SLOW_CHARGER] = "SLOW-CHARGER",
+ [MAX77843_CABLE_MHL] = "MHL",
+ [MAX77843_CABLE_MHL_TA] = "MHL-TA",
+ [MAX77843_CABLE_JIG_USB_ON] = "JIG-USB-ON",
+ [MAX77843_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
+ [MAX77843_CABLE_JIG_UART_ON] = "JIG-UART-ON",
+ [MAX77843_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
+};
+
+struct max77843_muic_irq {
+ unsigned int irq;
+ const char *name;
+ unsigned int virq;
+};
+
+static struct max77843_muic_irq max77843_muic_irqs[] = {
+ { MAX77843_MUIC_IRQ_INT1_ADC, "MUIC-ADC" },
+ { MAX77843_MUIC_IRQ_INT1_ADCERROR, "MUIC-ADC_ERROR" },
+ { MAX77843_MUIC_IRQ_INT1_ADC1K, "MUIC-ADC1K" },
+ { MAX77843_MUIC_IRQ_INT2_CHGTYP, "MUIC-CHGTYP" },
+ { MAX77843_MUIC_IRQ_INT2_CHGDETRUN, "MUIC-CHGDETRUN" },
+ { MAX77843_MUIC_IRQ_INT2_DCDTMR, "MUIC-DCDTMR" },
+ { MAX77843_MUIC_IRQ_INT2_DXOVP, "MUIC-DXOVP" },
+ { MAX77843_MUIC_IRQ_INT2_VBVOLT, "MUIC-VBVOLT" },
+ { MAX77843_MUIC_IRQ_INT3_VBADC, "MUIC-VBADC" },
+ { MAX77843_MUIC_IRQ_INT3_VDNMON, "MUIC-VDNMON" },
+ { MAX77843_MUIC_IRQ_INT3_DNRES, "MUIC-DNRES" },
+ { MAX77843_MUIC_IRQ_INT3_MPNACK, "MUIC-MPNACK"},
+ { MAX77843_MUIC_IRQ_INT3_MRXBUFOW, "MUIC-MRXBUFOW"},
+ { MAX77843_MUIC_IRQ_INT3_MRXTRF, "MUIC-MRXTRF"},
+ { MAX77843_MUIC_IRQ_INT3_MRXPERR, "MUIC-MRXPERR"},
+ { MAX77843_MUIC_IRQ_INT3_MRXRDY, "MUIC-MRXRDY"},
+};
+
+static const struct regmap_config max77843_muic_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX77843_MUIC_REG_END,
+};
+
+static const struct regmap_irq max77843_muic_irq[] = {
+ /* INT1 interrupt */
+ { .reg_offset = 0, .mask = MAX77843_MUIC_ADC, },
+ { .reg_offset = 0, .mask = MAX77843_MUIC_ADCERROR, },
+ { .reg_offset = 0, .mask = MAX77843_MUIC_ADC1K, },
+
+ /* INT2 interrupt */
+ { .reg_offset = 1, .mask = MAX77843_MUIC_CHGTYP, },
+ { .reg_offset = 1, .mask = MAX77843_MUIC_CHGDETRUN, },
+ { .reg_offset = 1, .mask = MAX77843_MUIC_DCDTMR, },
+ { .reg_offset = 1, .mask = MAX77843_MUIC_DXOVP, },
+ { .reg_offset = 1, .mask = MAX77843_MUIC_VBVOLT, },
+
+ /* INT3 interrupt */
+ { .reg_offset = 2, .mask = MAX77843_MUIC_VBADC, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_VDNMON, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_DNRES, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_MPNACK, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_MRXBUFOW, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_MRXTRF, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_MRXPERR, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_MRXRDY, },
+};
+
+static const struct regmap_irq_chip max77843_muic_irq_chip = {
+ .name = "max77843-muic",
+ .status_base = MAX77843_MUIC_REG_INT1,
+ .mask_base = MAX77843_MUIC_REG_INTMASK1,
+ .mask_invert = true,
+ .num_regs = 3,
+ .irqs = max77843_muic_irq,
+ .num_irqs = ARRAY_SIZE(max77843_muic_irq),
+};
+
+static int max77843_muic_set_path(struct max77843_muic_info *info,
+ u8 val, bool attached)
+{
+ struct max77843 *max77843 = info->max77843;
+ int ret = 0;
+ unsigned int ctrl1, ctrl2;
+
+ if (attached)
+ ctrl1 = val;
+ else
+ ctrl1 = CONTROL1_SW_OPEN;
+
+ ret = regmap_update_bits(max77843->regmap_muic,
+ MAX77843_MUIC_REG_CONTROL1,
+ CONTROL1_COM_SW, ctrl1);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot switch MUIC port\n");
+ return ret;
+ }
+
+ if (attached)
+ ctrl2 = MAX77843_MUIC_CONTROL2_CPEN_MASK;
+ else
+ ctrl2 = MAX77843_MUIC_CONTROL2_LOWPWR_MASK;
+
+ ret = regmap_update_bits(max77843->regmap_muic,
+ MAX77843_MUIC_REG_CONTROL2,
+ MAX77843_MUIC_CONTROL2_LOWPWR_MASK |
+ MAX77843_MUIC_CONTROL2_CPEN_MASK, ctrl2);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot update lowpower mode\n");
+ return ret;
+ }
+
+ dev_dbg(info->dev,
+ "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
+ ctrl1, ctrl2, attached ? "attached" : "detached");
+
+ return 0;
+}
+
+static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
+ enum max77843_muic_cable_group group, bool *attached)
+{
+ int adc, chg_type, cable_type, gnd_type;
+
+ adc = info->status[MAX77843_MUIC_STATUS1] &
+ MAX77843_MUIC_STATUS1_ADC_MASK;
+ adc >>= STATUS1_ADC_SHIFT;
+
+ switch (group) {
+ case MAX77843_CABLE_GROUP_ADC:
+ if (adc == MAX77843_MUIC_ADC_OPEN) {
+ *attached = false;
+ cable_type = info->prev_cable_type;
+ info->prev_cable_type = MAX77843_MUIC_ADC_OPEN;
+ } else {
+ *attached = true;
+ cable_type = info->prev_cable_type = adc;
+ }
+ break;
+ case MAX77843_CABLE_GROUP_CHG:
+ chg_type = info->status[MAX77843_MUIC_STATUS2] &
+ MAX77843_MUIC_STATUS2_CHGTYP_MASK;
+
+ /* Check GROUND accessory with charger cable */
+ if (adc == MAX77843_MUIC_ADC_GROUND) {
+ if (chg_type == MAX77843_MUIC_CHG_NONE) {
+ /* The following state when charger cable is
+ * disconnected but the GROUND accessory still
+ * connected */
+ *attached = false;
+ cable_type = info->prev_chg_type;
+ info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
+ } else {
+
+ /* The following state when charger cable is
+ * connected on the GROUND accessory */
+ *attached = true;
+ cable_type = MAX77843_MUIC_CHG_GND;
+ info->prev_chg_type = MAX77843_MUIC_CHG_GND;
+ }
+ break;
+ }
+
+ if (chg_type == MAX77843_MUIC_CHG_NONE) {
+ *attached = false;
+ cable_type = info->prev_chg_type;
+ info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
+ } else {
+ *attached = true;
+ cable_type = info->prev_chg_type = chg_type;
+ }
+ break;
+ case MAX77843_CABLE_GROUP_ADC_GND:
+ if (adc == MAX77843_MUIC_ADC_OPEN) {
+ *attached = false;
+ cable_type = info->prev_gnd_type;
+ info->prev_gnd_type = MAX77843_MUIC_ADC_OPEN;
+ } else {
+ *attached = true;
+
+ /* Offset|ADC1K|VBVolt|
+ * 0x1| 0| 0| USB-HOST
+ * 0x1| 0| 1| USB-HOST with VB
+ * 0x1| 1| 0| MHL
+ * 0x1| 1| 1| MHL with VB */
+ /* Get ADC1K register bit */
+ gnd_type = (info->status[MAX77843_MUIC_STATUS1] &
+ MAX77843_MUIC_STATUS1_ADC1K_MASK);
+
+ /* Get VBVolt register bit */
+ gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
+ MAX77843_MUIC_STATUS2_VBVOLT_MASK);
+ gnd_type >>= STATUS2_VBVOLT_SHIFT;
+
+ /* Offset of GND cable */
+ gnd_type |= MAX77843_MUIC_GND_USB_HOST;
+ cable_type = info->prev_gnd_type = gnd_type;
+ }
+ break;
+ default:
+ dev_err(info->dev, "Unknown cable group (%d)\n", group);
+ cable_type = -EINVAL;
+ break;
+ }
+
+ return cable_type;
+}
+
+static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
+{
+ int ret, gnd_cable_type;
+ bool attached;
+
+ gnd_cable_type = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_ADC_GND, &attached);
+ dev_dbg(info->dev, "external connector is %s (gnd:0x%02x)\n",
+ attached ? "attached" : "detached", gnd_cable_type);
+
+ switch (gnd_cable_type) {
+ case MAX77843_MUIC_GND_USB_HOST:
+ case MAX77843_MUIC_GND_USB_HOST_VB:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "USB-HOST", attached);
+ break;
+ case MAX77843_MUIC_GND_MHL_VB:
+ case MAX77843_MUIC_GND_MHL:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "MHL", attached);
+ break;
+ default:
+ dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
+ attached ? "attached" : "detached", gnd_cable_type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int max77843_muic_jig_handler(struct max77843_muic_info *info,
+ int cable_type, bool attached)
+{
+ int ret;
+
+ dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
+ attached ? "attached" : "detached", cable_type);
+
+ switch (cable_type) {
+ case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ if (ret < 0)
+ return ret;
+ extcon_set_cable_state(info->edev, "JIG-USB-OFF", attached);
+ break;
+ case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ if (ret < 0)
+ return ret;
+ extcon_set_cable_state(info->edev, "JIG-USB-ON", attached);
+ break;
+ case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_UART, attached);
+ if (ret < 0)
+ return ret;
+ extcon_set_cable_state(info->edev, "JIG-UART-OFF", attached);
+ break;
+ default:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+ break;
+ }
+
+ return 0;
+}
+
+static int max77843_muic_adc_handler(struct max77843_muic_info *info)
+{
+ int ret, cable_type;
+ bool attached;
+
+ cable_type = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_ADC, &attached);
+
+ dev_dbg(info->dev,
+ "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n",
+ attached ? "attached" : "detached", cable_type,
+ info->prev_cable_type);
+
+ switch (cable_type) {
+ case MAX77843_MUIC_ADC_GROUND:
+ ret = max77843_muic_adc_gnd_handler(info);
+ if (ret < 0)
+ return ret;
+ break;
+ case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
+ case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
+ case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
+ ret = max77843_muic_jig_handler(info, cable_type, attached);
+ if (ret < 0)
+ return ret;
+ break;
+ case MAX77843_MUIC_ADC_SEND_END_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S1_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S2_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S3_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S4_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S5_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S6_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S7_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S8_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S9_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S10_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S11_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON:
+ case MAX77843_MUIC_ADC_RESERVED_ACC_1:
+ case MAX77843_MUIC_ADC_RESERVED_ACC_2:
+ case MAX77843_MUIC_ADC_RESERVED_ACC_3:
+ case MAX77843_MUIC_ADC_RESERVED_ACC_4:
+ case MAX77843_MUIC_ADC_RESERVED_ACC_5:
+ case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2:
+ case MAX77843_MUIC_ADC_PHONE_POWERED_DEV:
+ case MAX77843_MUIC_ADC_TTY_CONVERTER:
+ case MAX77843_MUIC_ADC_UART_CABLE:
+ case MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG:
+ case MAX77843_MUIC_ADC_AV_CABLE_NOLOAD:
+ case MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG:
+ case MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON:
+ case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1:
+ case MAX77843_MUIC_ADC_OPEN:
+ dev_err(info->dev,
+ "accessory is %s but it isn't used (adc:0x%x)\n",
+ attached ? "attached" : "detached", cable_type);
+ return -EAGAIN;
+ default:
+ dev_err(info->dev,
+ "failed to detect %s accessory (adc:0x%x)\n",
+ attached ? "attached" : "detached", cable_type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int max77843_muic_chg_handler(struct max77843_muic_info *info)
+{
+ int ret, chg_type, gnd_type;
+ bool attached;
+
+ chg_type = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_CHG, &attached);
+
+ dev_dbg(info->dev,
+ "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n",
+ attached ? "attached" : "detached",
+ chg_type, info->prev_chg_type);
+
+ switch (chg_type) {
+ case MAX77843_MUIC_CHG_USB:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "USB", attached);
+ break;
+ case MAX77843_MUIC_CHG_DOWNSTREAM:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev,
+ "CHARGER-DOWNSTREAM", attached);
+ break;
+ case MAX77843_MUIC_CHG_DEDICATED:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "TA", attached);
+ break;
+ case MAX77843_MUIC_CHG_SPECIAL_500MA:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "SLOW-CHAREGER", attached);
+ break;
+ case MAX77843_MUIC_CHG_SPECIAL_1A:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "FAST-CHARGER", attached);
+ break;
+ case MAX77843_MUIC_CHG_GND:
+ gnd_type = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_ADC_GND, &attached);
+
+ /* Charger cable on MHL accessory is attach or detach */
+ if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
+ extcon_set_cable_state(info->edev, "MHL-TA", true);
+ else if (gnd_type == MAX77843_MUIC_GND_MHL)
+ extcon_set_cable_state(info->edev, "MHL-TA", false);
+ break;
+ case MAX77843_MUIC_CHG_NONE:
+ break;
+ default:
+ dev_err(info->dev,
+ "failed to detect %s accessory (chg_type:0x%x)\n",
+ attached ? "attached" : "detached", chg_type);
+
+ max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void max77843_muic_irq_work(struct work_struct *work)
+{
+ struct max77843_muic_info *info = container_of(work,
+ struct max77843_muic_info, irq_work);
+ struct max77843 *max77843 = info->max77843;
+ int ret = 0;
+
+ mutex_lock(&info->mutex);
+
+ ret = regmap_bulk_read(max77843->regmap_muic,
+ MAX77843_MUIC_REG_STATUS1, info->status,
+ MAX77843_MUIC_STATUS_NUM);
+ if (ret) {
+ dev_err(info->dev, "Cannot read STATUS registers\n");
+ mutex_unlock(&info->mutex);
+ return;
+ }
+
+ if (info->irq_adc) {
+ ret = max77843_muic_adc_handler(info);
+ if (ret)
+ dev_err(info->dev, "Unknown cable type\n");
+ info->irq_adc = false;
+ }
+
+ if (info->irq_chg) {
+ ret = max77843_muic_chg_handler(info);
+ if (ret)
+ dev_err(info->dev, "Unknown charger type\n");
+ info->irq_chg = false;
+ }
+
+ mutex_unlock(&info->mutex);
+}
+
+static irqreturn_t max77843_muic_irq_handler(int irq, void *data)
+{
+ struct max77843_muic_info *info = data;
+ int i, irq_type = -1;
+
+ for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++)
+ if (irq == max77843_muic_irqs[i].virq)
+ irq_type = max77843_muic_irqs[i].irq;
+
+ switch (irq_type) {
+ case MAX77843_MUIC_IRQ_INT1_ADC:
+ case MAX77843_MUIC_IRQ_INT1_ADCERROR:
+ case MAX77843_MUIC_IRQ_INT1_ADC1K:
+ info->irq_adc = true;
+ break;
+ case MAX77843_MUIC_IRQ_INT2_CHGTYP:
+ case MAX77843_MUIC_IRQ_INT2_CHGDETRUN:
+ case MAX77843_MUIC_IRQ_INT2_DCDTMR:
+ case MAX77843_MUIC_IRQ_INT2_DXOVP:
+ case MAX77843_MUIC_IRQ_INT2_VBVOLT:
+ info->irq_chg = true;
+ break;
+ case MAX77843_MUIC_IRQ_INT3_VBADC:
+ case MAX77843_MUIC_IRQ_INT3_VDNMON:
+ case MAX77843_MUIC_IRQ_INT3_DNRES:
+ case MAX77843_MUIC_IRQ_INT3_MPNACK:
+ case MAX77843_MUIC_IRQ_INT3_MRXBUFOW:
+ case MAX77843_MUIC_IRQ_INT3_MRXTRF:
+ case MAX77843_MUIC_IRQ_INT3_MRXPERR:
+ case MAX77843_MUIC_IRQ_INT3_MRXRDY:
+ break;
+ default:
+ dev_err(info->dev, "Cannot recognize IRQ(%d)\n", irq_type);
+ break;
+ }
+
+ schedule_work(&info->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static void max77843_muic_detect_cable_wq(struct work_struct *work)
+{
+ struct max77843_muic_info *info = container_of(to_delayed_work(work),
+ struct max77843_muic_info, wq_detcable);
+ struct max77843 *max77843 = info->max77843;
+ int chg_type, adc, ret;
+ bool attached;
+
+ mutex_lock(&info->mutex);
+
+ ret = regmap_bulk_read(max77843->regmap_muic,
+ MAX77843_MUIC_REG_STATUS1, info->status,
+ MAX77843_MUIC_STATUS_NUM);
+ if (ret) {
+ dev_err(info->dev, "Cannot read STATUS registers\n");
+ goto err_cable_wq;
+ }
+
+ adc = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_ADC, &attached);
+ if (attached && adc != MAX77843_MUIC_ADC_OPEN) {
+ ret = max77843_muic_adc_handler(info);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot detect accessory\n");
+ goto err_cable_wq;
+ }
+ }
+
+ chg_type = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_CHG, &attached);
+ if (attached && chg_type != MAX77843_MUIC_CHG_NONE) {
+ ret = max77843_muic_chg_handler(info);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot detect charger accessory\n");
+ goto err_cable_wq;
+ }
+ }
+
+err_cable_wq:
+ mutex_unlock(&info->mutex);
+}
+
+static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
+ enum max77843_muic_adc_debounce_time time)
+{
+ struct max77843 *max77843 = info->max77843;
+ int ret;
+
+ switch (time) {
+ case MAX77843_DEBOUNCE_TIME_5MS:
+ case MAX77843_DEBOUNCE_TIME_10MS:
+ case MAX77843_DEBOUNCE_TIME_25MS:
+ case MAX77843_DEBOUNCE_TIME_38_62MS:
+ ret = regmap_update_bits(max77843->regmap_muic,
+ MAX77843_MUIC_REG_CONTROL4,
+ MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
+ time << CONTROL4_ADCDBSET_SHIFT);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot write MUIC regmap\n");
+ return ret;
+ }
+ break;
+ default:
+ dev_err(info->dev, "Invalid ADC debounce time\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int max77843_init_muic_regmap(struct max77843 *max77843)
+{
+ int ret;
+
+ max77843->i2c_muic = i2c_new_dummy(max77843->i2c->adapter,
+ I2C_ADDR_MUIC);
+ if (!max77843->i2c_muic) {
+ dev_err(&max77843->i2c->dev,
+ "Cannot allocate I2C device for MUIC\n");
+ return -ENOMEM;
+ }
+
+ i2c_set_clientdata(max77843->i2c_muic, max77843);
+
+ max77843->regmap_muic = devm_regmap_init_i2c(max77843->i2c_muic,
+ &max77843_muic_regmap_config);
+ if (IS_ERR(max77843->regmap_muic)) {
+ ret = PTR_ERR(max77843->regmap_muic);
+ goto err_muic_i2c;
+ }
+
+ ret = regmap_add_irq_chip(max77843->regmap_muic, max77843->irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
+ 0, &max77843_muic_irq_chip, &max77843->irq_data_muic);
+ if (ret < 0) {
+ dev_err(&max77843->i2c->dev, "Cannot add MUIC IRQ chip\n");
+ goto err_muic_i2c;
+ }
+
+ return 0;
+
+err_muic_i2c:
+ i2c_unregister_device(max77843->i2c_muic);
+
+ return ret;
+}
+
+static int max77843_muic_probe(struct platform_device *pdev)
+{
+ struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+ struct max77843_muic_info *info;
+ unsigned int id;
+ int i, ret;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->dev = &pdev->dev;
+ info->max77843 = max77843;
+
+ platform_set_drvdata(pdev, info);
+ mutex_init(&info->mutex);
+
+ /* Initialize i2c and regmap */
+ ret = max77843_init_muic_regmap(max77843);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to init MUIC regmap\n");
+ return ret;
+ }
+
+ /* Turn off auto detection configuration */
+ ret = regmap_update_bits(max77843->regmap_muic,
+ MAX77843_MUIC_REG_CONTROL4,
+ MAX77843_MUIC_CONTROL4_USBAUTO_MASK |
+ MAX77843_MUIC_CONTROL4_FCTAUTO_MASK,
+ CONTROL4_AUTO_DISABLE);
+
+ /* Initialize extcon device */
+ info->edev = devm_extcon_dev_allocate(&pdev->dev,
+ max77843_extcon_cable);
+ if (IS_ERR(info->edev)) {
+ dev_err(&pdev->dev, "Failed to allocate memory for extcon\n");
+ ret = -ENODEV;
+ goto err_muic_irq;
+ }
+
+ ret = devm_extcon_dev_register(&pdev->dev, info->edev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register extcon device\n");
+ goto err_muic_irq;
+ }
+
+ /* Set ADC debounce time */
+ max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
+
+ /* Set initial path for UART */
+ max77843_muic_set_path(info, CONTROL1_SW_UART, true);
+
+ /* Check revision number of MUIC device */
+ ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to read revision number\n");
+ goto err_muic_irq;
+ }
+ dev_info(info->dev, "MUIC device ID : 0x%x\n", id);
+
+ /* Support virtual irq domain for max77843 MUIC device */
+ INIT_WORK(&info->irq_work, max77843_muic_irq_work);
+
+ for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) {
+ struct max77843_muic_irq *muic_irq = &max77843_muic_irqs[i];
+ unsigned int virq = 0;
+
+ virq = regmap_irq_get_virq(max77843->irq_data_muic,
+ muic_irq->irq);
+ if (virq <= 0) {
+ ret = -EINVAL;
+ goto err_muic_irq;
+ }
+ muic_irq->virq = virq;
+
+ ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
+ max77843_muic_irq_handler, IRQF_NO_SUSPEND,
+ muic_irq->name, info);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to request irq (IRQ: %d, error: %d)\n",
+ muic_irq->irq, ret);
+ goto err_muic_irq;
+ }
+ }
+
+ /* Detect accessory after completing the initialization of platform */
+ INIT_DELAYED_WORK(&info->wq_detcable, max77843_muic_detect_cable_wq);
+ queue_delayed_work(system_power_efficient_wq,
+ &info->wq_detcable, msecs_to_jiffies(DELAY_MS_DEFAULT));
+
+ return 0;
+
+err_muic_irq:
+ regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
+ i2c_unregister_device(max77843->i2c_muic);
+
+ return ret;
+}
+
+static int max77843_muic_remove(struct platform_device *pdev)
+{
+ struct max77843_muic_info *info = platform_get_drvdata(pdev);
+ struct max77843 *max77843 = info->max77843;
+
+ cancel_work_sync(&info->irq_work);
+ regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
+ i2c_unregister_device(max77843->i2c_muic);
+
+ return 0;
+}
+
+static const struct platform_device_id max77843_muic_id[] = {
+ { "max77843-muic", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, max77843_muic_id);
+
+static struct platform_driver max77843_muic_driver = {
+ .driver = {
+ .name = "max77843-muic",
+ },
+ .probe = max77843_muic_probe,
+ .remove = max77843_muic_remove,
+ .id_table = max77843_muic_id,
+};
+
+static int __init max77843_muic_init(void)
+{
+ return platform_driver_register(&max77843_muic_driver);
+}
+subsys_initcall(max77843_muic_init);
+
+MODULE_DESCRIPTION("Maxim MAX77843 Extcon driver");
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index fc1678fa95c4..5774e56c6422 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -579,8 +579,6 @@ static void max8997_muic_irq_work(struct work_struct *work)
dev_err(info->dev, "failed to handle MUIC interrupt\n");
mutex_unlock(&info->mutex);
-
- return;
}
static irqreturn_t max8997_muic_irq_handler(int irq, void *data)
@@ -689,8 +687,7 @@ static int max8997_muic_probe(struct platform_device *pdev)
muic_irq->name, info);
if (ret) {
dev_err(&pdev->dev,
- "failed: irq request (IRQ: %d,"
- " error :%d)\n",
+ "failed: irq request (IRQ: %d, error :%d)\n",
muic_irq->irq, ret);
goto err_irq;
}
diff --git a/drivers/extcon/extcon-rt8973a.c b/drivers/extcon/extcon-rt8973a.c
index a784b2d5ee72..9ccd5af89d1c 100644
--- a/drivers/extcon/extcon-rt8973a.c
+++ b/drivers/extcon/extcon-rt8973a.c
@@ -582,10 +582,8 @@ static int rt8973a_muic_i2c_probe(struct i2c_client *i2c,
return -EINVAL;
info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
- if (!info) {
- dev_err(&i2c->dev, "failed to allocate memory\n");
+ if (!info)
return -ENOMEM;
- }
i2c_set_clientdata(i2c, info);
info->dev = &i2c->dev;
@@ -681,7 +679,7 @@ static int rt8973a_muic_i2c_remove(struct i2c_client *i2c)
return 0;
}
-static struct of_device_id rt8973a_dt_match[] = {
+static const struct of_device_id rt8973a_dt_match[] = {
{ .compatible = "richtek,rt8973a-muic" },
{ },
};
diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index b0f7bd82af90..2f93cf307852 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -359,8 +359,8 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
break;
default:
dev_dbg(info->dev,
- "cannot identify the cable type: adc(0x%x) "
- "dev_type1(0x%x)\n", adc, dev_type1);
+ "cannot identify the cable type: adc(0x%x)\n",
+ adc);
return -EINVAL;
};
break;
@@ -659,7 +659,7 @@ static int sm5502_muic_i2c_remove(struct i2c_client *i2c)
return 0;
}
-static struct of_device_id sm5502_dt_match[] = {
+static const struct of_device_id sm5502_dt_match[] = {
{ .compatible = "siliconmitus,sm5502-muic" },
{ },
};
diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
new file mode 100644
index 000000000000..de67fce18984
--- /dev/null
+++ b/drivers/extcon/extcon-usb-gpio.c
@@ -0,0 +1,237 @@
+/**
+ * drivers/extcon/extcon-usb-gpio.c - USB GPIO extcon driver
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Roger Quadros <rogerq@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/extcon.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define USB_GPIO_DEBOUNCE_MS 20 /* ms */
+
+struct usb_extcon_info {
+ struct device *dev;
+ struct extcon_dev *edev;
+
+ struct gpio_desc *id_gpiod;
+ int id_irq;
+
+ unsigned long debounce_jiffies;
+ struct delayed_work wq_detcable;
+};
+
+/* List of detectable cables */
+enum {
+ EXTCON_CABLE_USB = 0,
+ EXTCON_CABLE_USB_HOST,
+
+ EXTCON_CABLE_END,
+};
+
+static const char *usb_extcon_cable[] = {
+ [EXTCON_CABLE_USB] = "USB",
+ [EXTCON_CABLE_USB_HOST] = "USB-HOST",
+ NULL,
+};
+
+static void usb_extcon_detect_cable(struct work_struct *work)
+{
+ int id;
+ struct usb_extcon_info *info = container_of(to_delayed_work(work),
+ struct usb_extcon_info,
+ wq_detcable);
+
+ /* check ID and update cable state */
+ id = gpiod_get_value_cansleep(info->id_gpiod);
+ if (id) {
+ /*
+ * ID = 1 means USB HOST cable detached.
+ * As we don't have event for USB peripheral cable attached,
+ * we simulate USB peripheral attach here.
+ */
+ extcon_set_cable_state(info->edev,
+ usb_extcon_cable[EXTCON_CABLE_USB_HOST],
+ false);
+ extcon_set_cable_state(info->edev,
+ usb_extcon_cable[EXTCON_CABLE_USB],
+ true);
+ } else {
+ /*
+ * ID = 0 means USB HOST cable attached.
+ * As we don't have event for USB peripheral cable detached,
+ * we simulate USB peripheral detach here.
+ */
+ extcon_set_cable_state(info->edev,
+ usb_extcon_cable[EXTCON_CABLE_USB],
+ false);
+ extcon_set_cable_state(info->edev,
+ usb_extcon_cable[EXTCON_CABLE_USB_HOST],
+ true);
+ }
+}
+
+static irqreturn_t usb_irq_handler(int irq, void *dev_id)
+{
+ struct usb_extcon_info *info = dev_id;
+
+ queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
+ info->debounce_jiffies);
+
+ return IRQ_HANDLED;
+}
+
+static int usb_extcon_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct usb_extcon_info *info;
+ int ret;
+
+ if (!np)
+ return -EINVAL;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->dev = dev;
+ info->id_gpiod = devm_gpiod_get(&pdev->dev, "id");
+ if (IS_ERR(info->id_gpiod)) {
+ dev_err(dev, "failed to get ID GPIO\n");
+ return PTR_ERR(info->id_gpiod);
+ }
+
+ ret = gpiod_set_debounce(info->id_gpiod,
+ USB_GPIO_DEBOUNCE_MS * 1000);
+ if (ret < 0)
+ info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEBOUNCE_MS);
+
+ INIT_DELAYED_WORK(&info->wq_detcable, usb_extcon_detect_cable);
+
+ info->id_irq = gpiod_to_irq(info->id_gpiod);
+ if (info->id_irq < 0) {
+ dev_err(dev, "failed to get ID IRQ\n");
+ return info->id_irq;
+ }
+
+ ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
+ usb_irq_handler,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ pdev->name, info);
+ if (ret < 0) {
+ dev_err(dev, "failed to request handler for ID IRQ\n");
+ return ret;
+ }
+
+ info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable);
+ if (IS_ERR(info->edev)) {
+ dev_err(dev, "failed to allocate extcon device\n");
+ return -ENOMEM;
+ }
+
+ ret = devm_extcon_dev_register(dev, info->edev);
+ if (ret < 0) {
+ dev_err(dev, "failed to register extcon device\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, info);
+ device_init_wakeup(dev, 1);
+
+ /* Perform initial detection */
+ usb_extcon_detect_cable(&info->wq_detcable.work);
+
+ return 0;
+}
+
+static int usb_extcon_remove(struct platform_device *pdev)
+{
+ struct usb_extcon_info *info = platform_get_drvdata(pdev);
+
+ cancel_delayed_work_sync(&info->wq_detcable);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int usb_extcon_suspend(struct device *dev)
+{
+ struct usb_extcon_info *info = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (device_may_wakeup(dev)) {
+ ret = enable_irq_wake(info->id_irq);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * We don't want to process any IRQs after this point
+ * as GPIOs used behind I2C subsystem might not be
+ * accessible until resume completes. So disable IRQ.
+ */
+ disable_irq(info->id_irq);
+
+ return ret;
+}
+
+static int usb_extcon_resume(struct device *dev)
+{
+ struct usb_extcon_info *info = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (device_may_wakeup(dev)) {
+ ret = disable_irq_wake(info->id_irq);
+ if (ret)
+ return ret;
+ }
+
+ enable_irq(info->id_irq);
+
+ return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(usb_extcon_pm_ops,
+ usb_extcon_suspend, usb_extcon_resume);
+
+static const struct of_device_id usb_extcon_dt_match[] = {
+ { .compatible = "linux,extcon-usb-gpio", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, usb_extcon_dt_match);
+
+static struct platform_driver usb_extcon_driver = {
+ .probe = usb_extcon_probe,
+ .remove = usb_extcon_remove,
+ .driver = {
+ .name = "extcon-usb-gpio",
+ .pm = &usb_extcon_pm_ops,
+ .of_match_table = usb_extcon_dt_match,
+ },
+};
+
+module_platform_driver(usb_extcon_driver);
+
+MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
+MODULE_DESCRIPTION("USB GPIO extcon driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon.c
index 8319f25b7145..4c9f165e4a04 100644
--- a/drivers/extcon/extcon-class.c
+++ b/drivers/extcon/extcon.c
@@ -158,6 +158,7 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr,
/* Optional callback given by the user */
if (edev->print_name) {
int ret = edev->print_name(edev, buf);
+
if (ret >= 0)
return ret;
}
@@ -444,6 +445,9 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj,
const char *extcon_name, const char *cable_name,
struct notifier_block *nb)
{
+ unsigned long flags;
+ int ret;
+
if (!obj || !cable_name || !nb)
return -EINVAL;
@@ -461,8 +465,11 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj,
obj->internal_nb.notifier_call = _call_per_cable;
- return raw_notifier_chain_register(&obj->edev->nh,
+ spin_lock_irqsave(&obj->edev->lock, flags);
+ ret = raw_notifier_chain_register(&obj->edev->nh,
&obj->internal_nb);
+ spin_unlock_irqrestore(&obj->edev->lock, flags);
+ return ret;
} else {
struct class_dev_iter iter;
struct extcon_dev *extd;
@@ -495,10 +502,17 @@ EXPORT_SYMBOL_GPL(extcon_register_interest);
*/
int extcon_unregister_interest(struct extcon_specific_cable_nb *obj)
{
+ unsigned long flags;
+ int ret;
+
if (!obj)
return -EINVAL;
- return raw_notifier_chain_unregister(&obj->edev->nh, &obj->internal_nb);
+ spin_lock_irqsave(&obj->edev->lock, flags);
+ ret = raw_notifier_chain_unregister(&obj->edev->nh, &obj->internal_nb);
+ spin_unlock_irqrestore(&obj->edev->lock, flags);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(extcon_unregister_interest);
@@ -515,7 +529,14 @@ EXPORT_SYMBOL_GPL(extcon_unregister_interest);
int extcon_register_notifier(struct extcon_dev *edev,
struct notifier_block *nb)
{
- return raw_notifier_chain_register(&edev->nh, nb);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&edev->lock, flags);
+ ret = raw_notifier_chain_register(&edev->nh, nb);
+ spin_unlock_irqrestore(&edev->lock, flags);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(extcon_register_notifier);
@@ -527,7 +548,14 @@ EXPORT_SYMBOL_GPL(extcon_register_notifier);
int extcon_unregister_notifier(struct extcon_dev *edev,
struct notifier_block *nb)
{
- return raw_notifier_chain_unregister(&edev->nh, nb);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&edev->lock, flags);
+ ret = raw_notifier_chain_unregister(&edev->nh, nb);
+ spin_unlock_irqrestore(&edev->lock, flags);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(extcon_unregister_notifier);