summaryrefslogtreecommitdiffstats
path: root/drivers/dma
diff options
context:
space:
mode:
authorRussell King - ARM Linux <linux@arm.linux.org.uk>2011-07-21 17:13:48 +0100
committerVinod Koul <vinod.koul@intel.com>2011-07-26 15:33:29 +0530
commit121c8476a3c39a483326c33526e72a07661df1fc (patch)
treee0cdeae942aebffac59c4c375bc7eef9f0f549dc /drivers/dma
parentaa88cdaa149e1c1cfc935ff73e50f3f9f3b2e3a1 (diff)
downloadlinux-121c8476a3c39a483326c33526e72a07661df1fc.tar.bz2
DMA: PL08x: avoid recalculating cctl at each prepare
Now that we have separate cctl values for M>P and P>M transfers, we can avoid calculating the cctl value each time we prepare a transaction. Move the bus selection and increment setting to the slave configuration and initialization functions. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Diffstat (limited to 'drivers/dma')
-rw-r--r--drivers/dma/amba-pl08x.c78
1 files changed, 42 insertions, 36 deletions
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 2dd37ff753ca..a84db8b39ba1 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -1095,6 +1095,23 @@ static const struct burst_table burst_sizes[] = {
},
};
+/*
+ * Given the source and destination available bus masks, select which
+ * will be routed to each port. We try to have source and destination
+ * on separate ports, but always respect the allowable settings.
+ */
+static u32 pl08x_select_bus(u8 src, u8 dst)
+{
+ u32 cctl = 0;
+
+ if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1)))
+ cctl |= PL080_CONTROL_DST_AHB2;
+ if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2)))
+ cctl |= PL080_CONTROL_SRC_AHB2;
+
+ return cctl;
+}
+
static u32 pl08x_cctl(u32 cctl)
{
cctl &= ~(PL080_CONTROL_SRC_AHB2 | PL080_CONTROL_DST_AHB2 |
@@ -1173,10 +1190,14 @@ static int dma_set_runtime_config(struct dma_chan *chan,
if (plchan->runtime_direction == DMA_FROM_DEVICE) {
plchan->src_addr = config->src_addr;
- plchan->src_cctl = pl08x_cctl(cctl);
+ plchan->src_cctl = pl08x_cctl(cctl) | PL080_CONTROL_DST_INCR |
+ pl08x_select_bus(plchan->cd->periph_buses,
+ pl08x->mem_buses);
} else {
plchan->dst_addr = config->dst_addr;
- plchan->dst_cctl = pl08x_cctl(cctl);
+ plchan->dst_cctl = pl08x_cctl(cctl) | PL080_CONTROL_SRC_INCR |
+ pl08x_select_bus(pl08x->mem_buses,
+ plchan->cd->periph_buses);
}
dev_dbg(&pl08x->adev->dev,
@@ -1277,23 +1298,6 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan,
return 0;
}
-/*
- * Given the source and destination available bus masks, select which
- * will be routed to each port. We try to have source and destination
- * on separate ports, but always respect the allowable settings.
- */
-static u32 pl08x_select_bus(struct pl08x_driver_data *pl08x, u8 src, u8 dst)
-{
- u32 cctl = 0;
-
- if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1)))
- cctl |= PL080_CONTROL_DST_AHB2;
- if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2)))
- cctl |= PL080_CONTROL_SRC_AHB2;
-
- return cctl;
-}
-
static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan,
unsigned long flags)
{
@@ -1345,8 +1349,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy(
txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR;
if (pl08x->vd->dualmaster)
- txd->cctl |= pl08x_select_bus(pl08x,
- pl08x->mem_buses, pl08x->mem_buses);
+ txd->cctl |= pl08x_select_bus(pl08x->mem_buses,
+ pl08x->mem_buses);
ret = pl08x_prep_channel_resources(plchan, txd);
if (ret)
@@ -1363,7 +1367,6 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_txd *txd;
- u8 src_buses, dst_buses;
int ret;
/*
@@ -1399,26 +1402,20 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
if (direction == DMA_TO_DEVICE) {
txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT;
- txd->cctl = plchan->dst_cctl | PL080_CONTROL_SRC_INCR;
+ txd->cctl = plchan->dst_cctl;
txd->src_addr = sgl->dma_address;
txd->dst_addr = plchan->dst_addr;
- src_buses = pl08x->mem_buses;
- dst_buses = plchan->cd->periph_buses;
} else if (direction == DMA_FROM_DEVICE) {
txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
- txd->cctl = plchan->src_cctl | PL080_CONTROL_DST_INCR;
+ txd->cctl = plchan->src_cctl;
txd->src_addr = plchan->src_addr;
txd->dst_addr = sgl->dma_address;
- src_buses = plchan->cd->periph_buses;
- dst_buses = pl08x->mem_buses;
} else {
dev_err(&pl08x->adev->dev,
"%s direction unsupported\n", __func__);
return NULL;
}
- txd->cctl |= pl08x_select_bus(pl08x, src_buses, dst_buses);
-
ret = pl08x_prep_channel_resources(plchan, txd);
if (ret)
return NULL;
@@ -1669,6 +1666,20 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
return mask ? IRQ_HANDLED : IRQ_NONE;
}
+static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan)
+{
+ u32 cctl = pl08x_cctl(chan->cd->cctl);
+
+ chan->slave = true;
+ chan->name = chan->cd->bus_id;
+ chan->src_addr = chan->cd->addr;
+ chan->dst_addr = chan->cd->addr;
+ chan->src_cctl = cctl | PL080_CONTROL_DST_INCR |
+ pl08x_select_bus(chan->cd->periph_buses, chan->host->mem_buses);
+ chan->dst_cctl = cctl | PL080_CONTROL_SRC_INCR |
+ pl08x_select_bus(chan->host->mem_buses, chan->cd->periph_buses);
+}
+
/*
* Initialise the DMAC memcpy/slave channels.
* Make a local wrapper to hold required data
@@ -1700,13 +1711,8 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
chan->state = PL08X_CHAN_IDLE;
if (slave) {
- chan->slave = true;
- chan->name = pl08x->pd->slave_channels[i].bus_id;
chan->cd = &pl08x->pd->slave_channels[i];
- chan->src_addr = chan->cd->addr;
- chan->dst_addr = chan->cd->addr;
- chan->src_cctl = pl08x_cctl(chan->cd->cctl);
- chan->dst_cctl = pl08x_cctl(chan->cd->cctl);
+ pl08x_dma_slave_init(chan);
} else {
chan->cd = &pl08x->pd->memcpy_channel;
chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i);