diff options
| author | Mark Brown <broonie@kernel.org> | 2022-11-25 21:26:29 +0000 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2022-11-25 21:26:29 +0000 |
| commit | acdce7aa7a4fc1094661feb0b833ae2eec2ad2d0 (patch) | |
| tree | 7b6654b2110f660651bae25728b5ab59227faa56 /drivers/dma/stm32-dma.c | |
| parent | a6d99022e56e8c1ddc4c75895ed9e3ce5da88453 (diff) | |
| parent | bf0d29fb51ff5e6c13097dbfed7b99e0e35b4a15 (diff) | |
| download | linux-acdce7aa7a4fc1094661feb0b833ae2eec2ad2d0.tar.bz2 | |
fsi: Add regmap and refactor sbefifo
Merge series from Eddie James <eajames@linux.ibm.com>:
The SBEFIFO hardware can now be attached over a new I2C endpoint interface
called the I2C Responder (I2CR). In order to use the existing SBEFIFO
driver, add a regmap driver for the FSI bus and an endpoint driver for the
I2CR. Then, refactor the SBEFIFO and OCC drivers to clean up and use the
new regmap driver or the I2CR interface.
This branch just has the regmap change so it can be shared with the FSI
code.
Diffstat (limited to 'drivers/dma/stm32-dma.c')
| -rw-r--r-- | drivers/dma/stm32-dma.c | 14 |
1 files changed, 6 insertions, 8 deletions
diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c index 4891a1767e5a..37674029cb42 100644 --- a/drivers/dma/stm32-dma.c +++ b/drivers/dma/stm32-dma.c @@ -675,6 +675,8 @@ static void stm32_dma_handle_chan_paused(struct stm32_dma_chan *chan) chan->chan_reg.dma_sndtr = stm32_dma_read(dmadev, STM32_DMA_SNDTR(chan->id)); + chan->status = DMA_PAUSED; + dev_dbg(chan2dev(chan), "vchan %pK: paused\n", &chan->vchan); } @@ -789,9 +791,7 @@ static irqreturn_t stm32_dma_chan_irq(int irq, void *devid) if (status & STM32_DMA_TCI) { stm32_dma_irq_clear(chan, STM32_DMA_TCI); if (scr & STM32_DMA_SCR_TCIE) { - if (chan->status == DMA_PAUSED && !(scr & STM32_DMA_SCR_EN)) - stm32_dma_handle_chan_paused(chan); - else + if (chan->status != DMA_PAUSED) stm32_dma_handle_chan_done(chan, scr); } status &= ~STM32_DMA_TCI; @@ -838,13 +838,11 @@ static int stm32_dma_pause(struct dma_chan *c) return -EPERM; spin_lock_irqsave(&chan->vchan.lock, flags); + ret = stm32_dma_disable_chan(chan); - /* - * A transfer complete flag is set to indicate the end of transfer due to the stream - * interruption, so wait for interrupt - */ if (!ret) - chan->status = DMA_PAUSED; + stm32_dma_handle_chan_paused(chan); + spin_unlock_irqrestore(&chan->vchan.lock, flags); return ret; |