diff options
author | Doug Anderson <dianders@chromium.org> | 2014-07-05 06:43:26 +0900 |
---|---|---|
committer | Daniel Lezcano <daniel.lezcano@linaro.org> | 2014-07-23 12:02:41 +0200 |
commit | 3252a646aa2cf706b2a26433a8bd9cb2e5dce410 (patch) | |
tree | 8e8520e5e646b3ac58be30f23885a49748431bba /drivers/clocksource/Kconfig | |
parent | fdb06f66d53e3c9ba7eeab3c0629c450aee76937 (diff) | |
download | linux-3252a646aa2cf706b2a26433a8bd9cb2e5dce410.tar.bz2 |
clocksource: exynos_mct: Only use 32-bits where possible
The MCT has a nice 64-bit counter. That means that we _can_ register
as a 64-bit clocksource and sched_clock. ...but that doesn't mean we
should.
The 64-bit counter is read by reading two 32-bit registers. That
means reading needs to be something like:
- Read upper half
- Read lower half
- Read upper half and confirm that it hasn't changed.
That wouldn't be terrible, but:
- THe MCT isn't very fast to access (hundreds of nanoseconds).
- The clocksource is queried _all the time_.
In total system profiles of real workloads on ChromeOS, we've seen
exynos_frc_read() taking 2% or more of CPU time even after optimizing
the 3 reads above to 2 (see below).
The MCT is clocked at ~24MHz on all known systems. That means that
the 32-bit half of the counter rolls over every ~178 seconds. This
inspired an optimization in ChromeOS to cache the upper half between
calls, moving 3 reads to 2. ...but we can do better! Having a 32-bit
timer that flips every 178 seconds is more than sufficient for Linux.
Let's just use the lower half of the MCT.
Times on 5420 to do 1000000 gettimeofday() calls from userspace:
* Original code: 1323852 us
* ChromeOS cache upper half: 1173084 us
* ChromeOS + ldmia to optimize: 1045674 us
* Use lower 32-bit only (this code): 1014429 us
As you can see, the time used doesn't increase linearly with the
number of reads and we can make 64-bit work almost as fast as 32-bit
with a bit of assembly code. But since there's no real gain for
64-bit, let's go with the simplest and fastest implementation.
Note: with this change roughly half the time for gettimeofday() is
spent in exynos_frc_read(). The rest is timer / system call overhead.
Also note: this patch disables the use of the MCT on ARM64 systems
until we've sorted out how to make "cycles_t" always 32-bit. Really
ARM64 systems should be using arch timers anyway.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Diffstat (limited to 'drivers/clocksource/Kconfig')
-rw-r--r-- | drivers/clocksource/Kconfig | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 7ea7d7c48d72..cfd6519df661 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -127,6 +127,7 @@ config CLKSRC_METAG_GENERIC config CLKSRC_EXYNOS_MCT def_bool y if ARCH_EXYNOS + depends on !ARM64 help Support for Multi Core Timer controller on Exynos SoCs. |