Merge tag 'tegra-for-4.7-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next

Pull tegra clk driver changes from Thierry Reding:

This set of changes contains a bunch of cleanups and minor fixes along
with some new clocks, mainly on Tegra210, in preparation for supporting
DisplayPort and HDMI 2.0.

* tag 'tegra-for-4.7-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  clk: tegra: dfll: Reformat CVB frequency table
  clk: tegra: dfll: Properly clean up on failure and removal
  clk: tegra: dfll: Make code more comprehensible
  clk: tegra: dfll: Reference CVB table instead of copying data
  clk: tegra: dfll: Update kerneldoc
  clk: tegra: Fix PLL_U post divider and initial rate on Tegra30
  clk: tegra: Initialize PLL_C to sane rate on Tegra30
  clk: tegra: Fix pllre Tegra210 and add pll_re_out1
  clk: tegra: Add sor_safe clock
  clk: tegra: dpaux and dpaux1 are fixed factor clocks
  clk: tegra: Add dpaux1 clock
  clk: tegra: Use correct parent for dpaux clock
  clk: tegra: Add fixed factor peripheral clock type
  clk: tegra: Special-case mipi-cal parent on Tegra114
  clk: tegra: Remove trailing blank line
  clk: tegra: Constify peripheral clock registers
  clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs

1 files changed, 85 insertions, 2 deletions

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 637041fd53ad..b8551813ec43 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -92,6 +92,7 @@
 #define PLLE_AUX 0x48c
 #define PLLRE_BASE 0x4c4
 #define PLLRE_MISC0 0x4c8
+#define PLLRE_OUT1 0x4cc
 #define PLLDP_BASE 0x590
 #define PLLDP_MISC 0x594
 
@@ -175,6 +176,19 @@
 #define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
 #define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
 
+#define SATA_PLL_CFG0				0x490
+#define SATA_PLL_CFG0_PADPLL_RESET_SWCTL	BIT(0)
+#define SATA_PLL_CFG0_PADPLL_USE_LOCKDET	BIT(2)
+#define SATA_PLL_CFG0_PADPLL_SLEEP_IDDQ		BIT(13)
+#define SATA_PLL_CFG0_SEQ_ENABLE		BIT(24)
+
+#define XUSBIO_PLL_CFG0				0x51c
+#define XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL	BIT(0)
+#define XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL	BIT(2)
+#define XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET	BIT(6)
+#define XUSBIO_PLL_CFG0_PADPLL_SLEEP_IDDQ	BIT(13)
+#define XUSBIO_PLL_CFG0_SEQ_ENABLE		BIT(24)
+
 #define UTMIPLL_HW_PWRDN_CFG0			0x52c
 #define UTMIPLL_HW_PWRDN_CFG0_UTMIPLL_LOCK	BIT(31)
 #define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE	BIT(25)
@@ -416,6 +430,51 @@ static const char *mux_pllmcp_clkm[] = {
 #define PLLU_MISC0_WRITE_MASK		0xbfffffff
 #define PLLU_MISC1_WRITE_MASK		0x00000007
 
+void tegra210_xusb_pll_hw_control_enable(void)
+{
+	u32 val;
+
+	val = readl_relaxed(clk_base + XUSBIO_PLL_CFG0);
+	val &= ~(XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL |
+		 XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL);
+	val |= XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET |
+	       XUSBIO_PLL_CFG0_PADPLL_SLEEP_IDDQ;
+	writel_relaxed(val, clk_base + XUSBIO_PLL_CFG0);
+}
+EXPORT_SYMBOL_GPL(tegra210_xusb_pll_hw_control_enable);
+
+void tegra210_xusb_pll_hw_sequence_start(void)
+{
+	u32 val;
+
+	val = readl_relaxed(clk_base + XUSBIO_PLL_CFG0);
+	val |= XUSBIO_PLL_CFG0_SEQ_ENABLE;
+	writel_relaxed(val, clk_base + XUSBIO_PLL_CFG0);
+}
+EXPORT_SYMBOL_GPL(tegra210_xusb_pll_hw_sequence_start);
+
+void tegra210_sata_pll_hw_control_enable(void)
+{
+	u32 val;
+
+	val = readl_relaxed(clk_base + SATA_PLL_CFG0);
+	val &= ~SATA_PLL_CFG0_PADPLL_RESET_SWCTL;
+	val |= SATA_PLL_CFG0_PADPLL_USE_LOCKDET |
+	       SATA_PLL_CFG0_PADPLL_SLEEP_IDDQ;
+	writel_relaxed(val, clk_base + SATA_PLL_CFG0);
+}
+EXPORT_SYMBOL_GPL(tegra210_sata_pll_hw_control_enable);
+
+void tegra210_sata_pll_hw_sequence_start(void)
+{
+	u32 val;
+
+	val = readl_relaxed(clk_base + SATA_PLL_CFG0);
+	val |= SATA_PLL_CFG0_SEQ_ENABLE;
+	writel_relaxed(val, clk_base + SATA_PLL_CFG0);
+}
+EXPORT_SYMBOL_GPL(tegra210_sata_pll_hw_sequence_start);
+
 static inline void _pll_misc_chk_default(void __iomem *base,
 					struct tegra_clk_pll_params *params,
 					u8 misc_num, u32 default_val, u32 mask)
@@ -2092,6 +2151,7 @@ static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_clk72Mhz_8] = { .dt_id = TEGRA210_CLK_CLK72MHZ, .present = true },
 	[tegra_clk_vic03_8] = { .dt_id = TEGRA210_CLK_VIC03, .present = true },
 	[tegra_clk_dpaux] = { .dt_id = TEGRA210_CLK_DPAUX, .present = true },
+	[tegra_clk_dpaux1] = { .dt_id = TEGRA210_CLK_DPAUX1, .present = true },
 	[tegra_clk_sor0] = { .dt_id = TEGRA210_CLK_SOR0, .present = true },
 	[tegra_clk_sor0_lvds] = { .dt_id = TEGRA210_CLK_SOR0_LVDS, .present = true },
 	[tegra_clk_gpu] = { .dt_id = TEGRA210_CLK_GPU, .present = true },
@@ -2403,6 +2463,18 @@ static __init void tegra210_periph_clk_init(void __iomem *clk_base,
 					1, 2);
 	clks[TEGRA210_CLK_XUSB_SS_DIV2] = clk;
 
+	clk = tegra_clk_register_periph_fixed("dpaux", "pll_p", 0, clk_base,
+					      1, 17, 181);
+	clks[TEGRA210_CLK_DPAUX] = clk;
+
+	clk = tegra_clk_register_periph_fixed("dpaux1", "pll_p", 0, clk_base,
+					      1, 17, 207);
+	clks[TEGRA210_CLK_DPAUX1] = clk;
+
+	clk = tegra_clk_register_periph_fixed("sor_safe", "pll_p", 0, clk_base,
+					      1, 17, 222);
+	clks[TEGRA210_CLK_SOR_SAFE] = clk;
+
 	/* pll_d_dsi_out */
 	clk = clk_register_gate(NULL, "pll_d_dsi_out", "pll_d_out0", 0,
 				clk_base + PLLD_MISC0, 21, 0, &pll_d_lock);
@@ -2582,8 +2654,10 @@ static void __init tegra210_pll_init(void __iomem *clk_base,
 	clks[TEGRA210_CLK_PLL_D_OUT0] = clk;
 
 	/* PLLRE */
-	clk = tegra_clk_register_pllre("pll_re_vco", "pll_ref", clk_base, pmc,
-			     0, &pll_re_vco_params, &pll_re_lock, pll_ref_freq);
+	clk = tegra_clk_register_pllre_tegra210("pll_re_vco", "pll_ref",
+						clk_base, pmc, 0,
+						&pll_re_vco_params,
+						&pll_re_lock, pll_ref_freq);
 	clk_register_clkdev(clk, "pll_re_vco", NULL);
 	clks[TEGRA210_CLK_PLL_RE_VCO] = clk;
 
@@ -2593,6 +2667,15 @@ static void __init tegra210_pll_init(void __iomem *clk_base,
 	clk_register_clkdev(clk, "pll_re_out", NULL);
 	clks[TEGRA210_CLK_PLL_RE_OUT] = clk;
 
+	clk = tegra_clk_register_divider("pll_re_out1_div", "pll_re_vco",
+					 clk_base + PLLRE_OUT1, 0,
+					 TEGRA_DIVIDER_ROUND_UP,
+					 8, 8, 1, NULL);
+	clk = tegra_clk_register_pll_out("pll_re_out1", "pll_re_out1_div",
+					 clk_base + PLLRE_OUT1, 1, 0,
+					 CLK_SET_RATE_PARENT, 0, NULL);
+	clks[TEGRA210_CLK_PLL_RE_OUT1] = clk;
+
 	/* PLLE */
 	clk = tegra_clk_register_plle_tegra210("pll_e", "pll_ref",
 				      clk_base, 0, &pll_e_params, NULL);