summaryrefslogtreecommitdiffstats
path: root/drivers/char
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-03-20 11:24:39 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-03-20 11:24:39 -0700
commit843ec558f91b8e8fdb6efc908f2c0506407cc750 (patch)
tree1866dccbc298390fc8686875942324075fd83f9d /drivers/char
parent71e7ff2578c3bc67fd893a9ba7f69fd563f271de (diff)
parentfb8ebec00b04f921ea1614a7303f1a8e5e9e47c5 (diff)
downloadlinux-843ec558f91b8e8fdb6efc908f2c0506407cc750.tar.bz2
Merge tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY/serial patches from Greg KH: "tty and serial merge for 3.4-rc1 Here's the big serial and tty merge for the 3.4-rc1 tree. There's loads of fixes and reworks in here from Jiri for the tty layer, and a number of patches from Alan to help try to wrestle the vt layer into a sane model. Other than that, lots of driver updates and fixes, and other minor stuff, all detailed in the shortlog." * tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (132 commits) serial: pxa: add clk_prepare/clk_unprepare calls TTY: Wrong unicode value copied in con_set_unimap() serial: PL011: clear pending interrupts serial: bfin-uart: Don't access tty circular buffer in TX DMA interrupt after it is reset. vt: NULL dereference in vt_do_kdsk_ioctl() tty: serial: vt8500: fix annotations for probe/remove serial: remove back and forth conversions in serial_out_sync serial: use serial_port_in/out vs serial_in/out in 8250 serial: introduce generic port in/out helpers serial: reduce number of indirections in 8250 code serial: delete useless void casts in 8250.c serial: make 8250's serial_in shareable to other drivers. serial: delete last unused traces of pausing I/O in 8250 pch_uart: Add module parameter descriptions pch_uart: Use existing default_baud in setup_console pch_uart: Add user_uartclk parameter pch_uart: Add Fish River Island II uart clock quirks pch_uart: Use uartclk instead of base_baud mpc5200b/uart: select more tolerant uart prescaler on low baudrates tty: moxa: fix bit test in moxa_start() ...
Diffstat (limited to 'drivers/char')
-rw-r--r--drivers/char/Kconfig15
-rw-r--r--drivers/char/Makefile1
-rw-r--r--drivers/char/briq_panel.c266
-rw-r--r--drivers/char/pcmcia/synclink_cs.c3
-rw-r--r--drivers/char/ttyprintk.c2
5 files changed, 1 insertions, 286 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 43643033a3ae..ee946865d6cb 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -66,21 +66,6 @@ config TTY_PRINTK
If unsure, say N.
-config BRIQ_PANEL
- tristate 'Total Impact briQ front panel driver'
- depends on PPC_CHRP
- ---help---
- The briQ is a small footprint CHRP computer with a frontpanel VFD, a
- tristate led and two switches. It is the size of a CDROM drive.
-
- If you have such one and want anything showing on the VFD then you
- must answer Y here.
-
- To compile this driver as a module, choose M here: the
- module will be called briq_panel.
-
- It's safe to say N here.
-
config BFIN_OTP
tristate "Blackfin On-Chip OTP Memory Support"
depends on BLACKFIN && (BF51x || BF52x || BF54x)
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 32762ba769c2..0dc5d7ce4864 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_UV_MMTIMER) += uv_mmtimer.o
obj-$(CONFIG_VIOTAPE) += viotape.o
obj-$(CONFIG_IBM_BSR) += bsr.o
obj-$(CONFIG_SGI_MBCS) += mbcs.o
-obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o
obj-$(CONFIG_BFIN_OTP) += bfin-otp.o
obj-$(CONFIG_PRINTER) += lp.o
diff --git a/drivers/char/briq_panel.c b/drivers/char/briq_panel.c
deleted file mode 100644
index 095ab90535ce..000000000000
--- a/drivers/char/briq_panel.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * Drivers for the Total Impact PPC based computer "BRIQ"
- * by Dr. Karsten Jeppesen
- *
- */
-
-#include <linux/module.h>
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/timer.h>
-#include <linux/kernel.h>
-#include <linux/wait.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-
-#define BRIQ_PANEL_MINOR 156
-#define BRIQ_PANEL_VFD_IOPORT 0x0390
-#define BRIQ_PANEL_LED_IOPORT 0x0398
-#define BRIQ_PANEL_VER "1.1 (04/20/2002)"
-#define BRIQ_PANEL_MSG0 "Loading Linux"
-
-static int vfd_is_open;
-static unsigned char vfd[40];
-static int vfd_cursor;
-static unsigned char ledpb, led;
-
-static void update_vfd(void)
-{
- int i;
-
- /* cursor home */
- outb(0x02, BRIQ_PANEL_VFD_IOPORT);
- for (i=0; i<20; i++)
- outb(vfd[i], BRIQ_PANEL_VFD_IOPORT + 1);
-
- /* cursor to next line */
- outb(0xc0, BRIQ_PANEL_VFD_IOPORT);
- for (i=20; i<40; i++)
- outb(vfd[i], BRIQ_PANEL_VFD_IOPORT + 1);
-
-}
-
-static void set_led(char state)
-{
- if (state == 'R')
- led = 0x01;
- else if (state == 'G')
- led = 0x02;
- else if (state == 'Y')
- led = 0x03;
- else if (state == 'X')
- led = 0x00;
- outb(led, BRIQ_PANEL_LED_IOPORT);
-}
-
-static int briq_panel_open(struct inode *ino, struct file *filep)
-{
- tty_lock();
- /* enforce single access, vfd_is_open is protected by BKL */
- if (vfd_is_open) {
- tty_unlock();
- return -EBUSY;
- }
- vfd_is_open = 1;
-
- tty_unlock();
- return 0;
-}
-
-static int briq_panel_release(struct inode *ino, struct file *filep)
-{
- if (!vfd_is_open)
- return -ENODEV;
-
- vfd_is_open = 0;
-
- return 0;
-}
-
-static ssize_t briq_panel_read(struct file *file, char __user *buf, size_t count,
- loff_t *ppos)
-{
- unsigned short c;
- unsigned char cp;
-
- if (!vfd_is_open)
- return -ENODEV;
-
- c = (inb(BRIQ_PANEL_LED_IOPORT) & 0x000c) | (ledpb & 0x0003);
- set_led(' ');
- /* upper button released */
- if ((!(ledpb & 0x0004)) && (c & 0x0004)) {
- cp = ' ';
- ledpb = c;
- if (copy_to_user(buf, &cp, 1))
- return -EFAULT;
- return 1;
- }
- /* lower button released */
- else if ((!(ledpb & 0x0008)) && (c & 0x0008)) {
- cp = '\r';
- ledpb = c;
- if (copy_to_user(buf, &cp, 1))
- return -EFAULT;
- return 1;
- } else {
- ledpb = c;
- return 0;
- }
-}
-
-static void scroll_vfd( void )
-{
- int i;
-
- for (i=0; i<20; i++) {
- vfd[i] = vfd[i+20];
- vfd[i+20] = ' ';
- }
- vfd_cursor = 20;
-}
-
-static ssize_t briq_panel_write(struct file *file, const char __user *buf, size_t len,
- loff_t *ppos)
-{
- size_t indx = len;
- int i, esc = 0;
-
- if (!vfd_is_open)
- return -EBUSY;
-
- for (;;) {
- char c;
- if (!indx)
- break;
- if (get_user(c, buf))
- return -EFAULT;
- if (esc) {
- set_led(c);
- esc = 0;
- } else if (c == 27) {
- esc = 1;
- } else if (c == 12) {
- /* do a form feed */
- for (i=0; i<40; i++)
- vfd[i] = ' ';
- vfd_cursor = 0;
- } else if (c == 10) {
- if (vfd_cursor < 20)
- vfd_cursor = 20;
- else if (vfd_cursor < 40)
- vfd_cursor = 40;
- else if (vfd_cursor < 60)
- vfd_cursor = 60;
- if (vfd_cursor > 59)
- scroll_vfd();
- } else {
- /* just a character */
- if (vfd_cursor > 39)
- scroll_vfd();
- vfd[vfd_cursor++] = c;
- }
- indx--;
- buf++;
- }
- update_vfd();
-
- return len;
-}
-
-static const struct file_operations briq_panel_fops = {
- .owner = THIS_MODULE,
- .read = briq_panel_read,
- .write = briq_panel_write,
- .open = briq_panel_open,
- .release = briq_panel_release,
- .llseek = noop_llseek,
-};
-
-static struct miscdevice briq_panel_miscdev = {
- BRIQ_PANEL_MINOR,
- "briq_panel",
- &briq_panel_fops
-};
-
-static int __init briq_panel_init(void)
-{
- struct device_node *root = of_find_node_by_path("/");
- const char *machine;
- int i;
-
- machine = of_get_property(root, "model", NULL);
- if (!machine || strncmp(machine, "TotalImpact,BRIQ-1", 18) != 0) {
- of_node_put(root);
- return -ENODEV;
- }
- of_node_put(root);
-
- printk(KERN_INFO
- "briq_panel: v%s Dr. Karsten Jeppesen (kj@totalimpact.com)\n",
- BRIQ_PANEL_VER);
-
- if (!request_region(BRIQ_PANEL_VFD_IOPORT, 4, "BRIQ Front Panel"))
- return -EBUSY;
-
- if (!request_region(BRIQ_PANEL_LED_IOPORT, 2, "BRIQ Front Panel")) {
- release_region(BRIQ_PANEL_VFD_IOPORT, 4);
- return -EBUSY;
- }
- ledpb = inb(BRIQ_PANEL_LED_IOPORT) & 0x000c;
-
- if (misc_register(&briq_panel_miscdev) < 0) {
- release_region(BRIQ_PANEL_VFD_IOPORT, 4);
- release_region(BRIQ_PANEL_LED_IOPORT, 2);
- return -EBUSY;
- }
-
- outb(0x38, BRIQ_PANEL_VFD_IOPORT); /* Function set */
- outb(0x01, BRIQ_PANEL_VFD_IOPORT); /* Clear display */
- outb(0x0c, BRIQ_PANEL_VFD_IOPORT); /* Display on */
- outb(0x06, BRIQ_PANEL_VFD_IOPORT); /* Entry normal */
- for (i=0; i<40; i++)
- vfd[i]=' ';
-#ifndef MODULE
- vfd[0] = 'L';
- vfd[1] = 'o';
- vfd[2] = 'a';
- vfd[3] = 'd';
- vfd[4] = 'i';
- vfd[5] = 'n';
- vfd[6] = 'g';
- vfd[7] = ' ';
- vfd[8] = '.';
- vfd[9] = '.';
- vfd[10] = '.';
-#endif /* !MODULE */
-
- update_vfd();
-
- return 0;
-}
-
-static void __exit briq_panel_exit(void)
-{
- misc_deregister(&briq_panel_miscdev);
- release_region(BRIQ_PANEL_VFD_IOPORT, 4);
- release_region(BRIQ_PANEL_LED_IOPORT, 2);
-}
-
-module_init(briq_panel_init);
-module_exit(briq_panel_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Karsten Jeppesen <karsten@jeppesens.com>");
-MODULE_DESCRIPTION("Driver for the Total Impact briQ front panel");
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 07f6a5abe372..f6453df4921c 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2484,7 +2484,7 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp)
/* verify range of specified line number */
line = tty->index;
- if ((line < 0) || (line >= mgslpc_device_count)) {
+ if (line >= mgslpc_device_count) {
printk("%s(%d):mgslpc_open with invalid line #%d.\n",
__FILE__,__LINE__,line);
return -ENODEV;
@@ -2836,7 +2836,6 @@ static int __init synclink_cs_init(void)
/* Initialize the tty_driver structure */
- serial_driver->owner = THIS_MODULE;
serial_driver->driver_name = "synclink_cs";
serial_driver->name = "ttySLP";
serial_driver->major = ttymajor;
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index eedd5474850c..46b77ede84c0 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -184,12 +184,10 @@ static int __init ttyprintk_init(void)
if (!ttyprintk_driver)
return ret;
- ttyprintk_driver->owner = THIS_MODULE;
ttyprintk_driver->driver_name = "ttyprintk";
ttyprintk_driver->name = "ttyprintk";
ttyprintk_driver->major = TTYAUX_MAJOR;
ttyprintk_driver->minor_start = 3;
- ttyprintk_driver->num = 1;
ttyprintk_driver->type = TTY_DRIVER_TYPE_CONSOLE;
ttyprintk_driver->init_termios = tty_std_termios;
ttyprintk_driver->init_termios.c_oflag = OPOST | OCRNL | ONOCR | ONLRET;