Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) The addition of nftables.  No longer will we need protocol aware
    firewall filtering modules, it can all live in userspace.

    At the core of nftables is a, for lack of a better term, virtual
    machine that executes byte codes to inspect packet or metadata
    (arriving interface index, etc.) and make verdict decisions.

    Besides support for loading packet contents and comparing them, the
    interpreter supports lookups in various datastructures as
    fundamental operations.  For example sets are supports, and
    therefore one could create a set of whitelist IP address entries
    which have ACCEPT verdicts attached to them, and use the appropriate
    byte codes to do such lookups.

    Since the interpreted code is composed in userspace, userspace can
    do things like optimize things before giving it to the kernel.

    Another major improvement is the capability of atomically updating
    portions of the ruleset.  In the existing netfilter implementation,
    one has to update the entire rule set in order to make a change and
    this is very expensive.

    Userspace tools exist to create nftables rules using existing
    netfilter rule sets, but both kernel implementations will need to
    co-exist for quite some time as we transition from the old to the
    new stuff.

    Kudos to Patrick McHardy, Pablo Neira Ayuso, and others who have
    worked so hard on this.

 2) Daniel Borkmann and Hannes Frederic Sowa made several improvements
    to our pseudo-random number generator, mostly used for things like
    UDP port randomization and netfitler, amongst other things.

    In particular the taus88 generater is updated to taus113, and test
    cases are added.

 3) Support 64-bit rates in HTB and TBF schedulers, from Eric Dumazet
    and Yang Yingliang.

 4) Add support for new 577xx tigon3 chips to tg3 driver, from Nithin
    Sujir.

 5) Fix two fatal flaws in TCP dynamic right sizing, from Eric Dumazet,
    Neal Cardwell, and Yuchung Cheng.

 6) Allow IP_TOS and IP_TTL to be specified in sendmsg() ancillary
    control message data, much like other socket option attributes.
    From Francesco Fusco.

 7) Allow applications to specify a cap on the rate computed
    automatically by the kernel for pacing flows, via a new
    SO_MAX_PACING_RATE socket option.  From Eric Dumazet.

 8) Make the initial autotuned send buffer sizing in TCP more closely
    reflect actual needs, from Eric Dumazet.

 9) Currently early socket demux only happens for TCP sockets, but we
    can do it for connected UDP sockets too.  Implementation from Shawn
    Bohrer.

10) Refactor inet socket demux with the goal of improving hash demux
    performance for listening sockets.  With the main goals being able
    to use RCU lookups on even request sockets, and eliminating the
    listening lock contention.  From Eric Dumazet.

11) The bonding layer has many demuxes in it's fast path, and an RCU
    conversion was started back in 3.11, several changes here extend the
    RCU usage to even more locations.  From Ding Tianhong and Wang
    Yufen, based upon suggestions by Nikolay Aleksandrov and Veaceslav
    Falico.

12) Allow stackability of segmentation offloads to, in particular, allow
    segmentation offloading over tunnels.  From Eric Dumazet.

13) Significantly improve the handling of secret keys we input into the
    various hash functions in the inet hashtables, TCP fast open, as
    well as syncookies.  From Hannes Frederic Sowa.  The key fundamental
    operation is "net_get_random_once()" which uses static keys.

    Hannes even extended this to ipv4/ipv6 fragmentation handling and
    our generic flow dissector.

14) The generic driver layer takes care now to set the driver data to
    NULL on device removal, so it's no longer necessary for drivers to
    explicitly set it to NULL any more.  Many drivers have been cleaned
    up in this way, from Jingoo Han.

15) Add a BPF based packet scheduler classifier, from Daniel Borkmann.

16) Improve CRC32 interfaces and generic SKB checksum iterators so that
    SCTP's checksumming can more cleanly be handled.  Also from Daniel
    Borkmann.

17) Add a new PMTU discovery mode, IP_PMTUDISC_INTERFACE, which forces
    using the interface MTU value.  This helps avoid PMTU attacks,
    particularly on DNS servers.  From Hannes Frederic Sowa.

18) Use generic XPS for transmit queue steering rather than internal
    (re-)implementation in virtio-net.  From Jason Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
  random32: add test cases for taus113 implementation
  random32: upgrade taus88 generator to taus113 from errata paper
  random32: move rnd_state to linux/random.h
  random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized
  random32: add periodic reseeding
  random32: fix off-by-one in seeding requirement
  PHY: Add RTL8201CP phy_driver to realtek
  xtsonic: add missing platform_set_drvdata() in xtsonic_probe()
  macmace: add missing platform_set_drvdata() in mace_probe()
  ethernet/arc/arc_emac: add missing platform_set_drvdata() in arc_emac_probe()
  ipv6: protect for_each_sk_fl_rcu in mem_check with rcu_read_lock_bh
  vlan: Implement vlan_dev_get_egress_qos_mask as an inline.
  ixgbe: add warning when max_vfs is out of range.
  igb: Update link modes display in ethtool
  netfilter: push reasm skb through instead of original frag skbs
  ip6_output: fragment outgoing reassembled skb properly
  MAINTAINERS: mv643xx_eth: take over maintainership from Lennart
  net_sched: tbf: support of 64bit rates
  ixgbe: deleting dfwd stations out of order can cause null ptr deref
  ixgbe: fix build err, num_rx_queues is only available with CONFIG_RPS
  ...

1 files changed, 181 insertions, 114 deletions

diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index 9a9f51875df5..5cf31c4fe6d1 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -57,8 +57,7 @@ bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
 		ocf = hci_opcode_ocf(opcode);
 		ogf = hci_opcode_ogf(opcode);
 
-		if (ocf == BT_CMD_MODULE_CFG_REQ &&
-					priv->btmrvl_dev.sendcmdflag) {
+		if (priv->btmrvl_dev.sendcmdflag) {
 			priv->btmrvl_dev.sendcmdflag = false;
 			priv->adapter->cmd_complete = true;
 			wake_up_interruptible(&priv->adapter->cmd_wait_q);
@@ -116,7 +115,6 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 			adapter->hs_state = HS_ACTIVATED;
 			if (adapter->psmode)
 				adapter->ps_state = PS_SLEEP;
-			wake_up_interruptible(&adapter->cmd_wait_q);
 			BT_DBG("HS ACTIVATED!");
 		} else {
 			BT_DBG("HS Enable failed");
@@ -168,45 +166,50 @@ exit:
 }
 EXPORT_SYMBOL_GPL(btmrvl_process_event);
 
-int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd)
+static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 cmd_no,
+				const void *param, u8 len)
 {
 	struct sk_buff *skb;
-	struct btmrvl_cmd *cmd;
-	int ret = 0;
+	struct hci_command_hdr *hdr;
 
-	skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
+	skb = bt_skb_alloc(HCI_COMMAND_HDR_SIZE + len, GFP_ATOMIC);
 	if (skb == NULL) {
 		BT_ERR("No free skb");
 		return -ENOMEM;
 	}
 
-	cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
-	cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, BT_CMD_MODULE_CFG_REQ));
-	cmd->length = 1;
-	cmd->data[0] = subcmd;
+	hdr = (struct hci_command_hdr *)skb_put(skb, HCI_COMMAND_HDR_SIZE);
+	hdr->opcode = cpu_to_le16(hci_opcode_pack(OGF, cmd_no));
+	hdr->plen = len;
+
+	if (len)
+		memcpy(skb_put(skb, len), param, len);
 
 	bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
 
-	skb->dev = (void *) priv->btmrvl_dev.hcidev;
 	skb_queue_head(&priv->adapter->tx_queue, skb);
 
 	priv->btmrvl_dev.sendcmdflag = true;
 
 	priv->adapter->cmd_complete = false;
 
-	BT_DBG("Queue module cfg Command");
-
 	wake_up_interruptible(&priv->main_thread.wait_q);
 
 	if (!wait_event_interruptible_timeout(priv->adapter->cmd_wait_q,
 				priv->adapter->cmd_complete,
-				msecs_to_jiffies(WAIT_UNTIL_CMD_RESP))) {
-		ret = -ETIMEDOUT;
-		BT_ERR("module_cfg_cmd(%x): timeout: %d",
-					subcmd, priv->btmrvl_dev.sendcmdflag);
-	}
+				msecs_to_jiffies(WAIT_UNTIL_CMD_RESP)))
+		return -ETIMEDOUT;
+
+	return 0;
+}
 
-	BT_DBG("module cfg Command done");
+int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd)
+{
+	int ret;
+
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_MODULE_CFG_REQ, &subcmd, 1);
+	if (ret)
+		BT_ERR("module_cfg_cmd(%x) failed\n", subcmd);
 
 	return ret;
 }
@@ -214,61 +217,36 @@ EXPORT_SYMBOL_GPL(btmrvl_send_module_cfg_cmd);
 
 int btmrvl_send_hscfg_cmd(struct btmrvl_private *priv)
 {
-	struct sk_buff *skb;
-	struct btmrvl_cmd *cmd;
-
-	skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
-	if (!skb) {
-		BT_ERR("No free skb");
-		return -ENOMEM;
-	}
-
-	cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
-	cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF,
-						   BT_CMD_HOST_SLEEP_CONFIG));
-	cmd->length = 2;
-	cmd->data[0] = (priv->btmrvl_dev.gpio_gap & 0xff00) >> 8;
-	cmd->data[1] = (u8) (priv->btmrvl_dev.gpio_gap & 0x00ff);
+	int ret;
+	u8 param[2];
 
-	bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
+	param[0] = (priv->btmrvl_dev.gpio_gap & 0xff00) >> 8;
+	param[1] = (u8) (priv->btmrvl_dev.gpio_gap & 0x00ff);
 
-	skb->dev = (void *) priv->btmrvl_dev.hcidev;
-	skb_queue_head(&priv->adapter->tx_queue, skb);
+	BT_DBG("Sending HSCFG Command, gpio=0x%x, gap=0x%x",
+	       param[0], param[1]);
 
-	BT_DBG("Queue HSCFG Command, gpio=0x%x, gap=0x%x", cmd->data[0],
-	       cmd->data[1]);
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_HOST_SLEEP_CONFIG, param, 2);
+	if (ret)
+		BT_ERR("HSCFG command failed\n");
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(btmrvl_send_hscfg_cmd);
 
 int btmrvl_enable_ps(struct btmrvl_private *priv)
 {
-	struct sk_buff *skb;
-	struct btmrvl_cmd *cmd;
-
-	skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
-	if (skb == NULL) {
-		BT_ERR("No free skb");
-		return -ENOMEM;
-	}
-
-	cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
-	cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF,
-					BT_CMD_AUTO_SLEEP_MODE));
-	cmd->length = 1;
+	int ret;
+	u8 param;
 
 	if (priv->btmrvl_dev.psmode)
-		cmd->data[0] = BT_PS_ENABLE;
+		param = BT_PS_ENABLE;
 	else
-		cmd->data[0] = BT_PS_DISABLE;
+		param = BT_PS_DISABLE;
 
-	bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
-
-	skb->dev = (void *) priv->btmrvl_dev.hcidev;
-	skb_queue_head(&priv->adapter->tx_queue, skb);
-
-	BT_DBG("Queue PSMODE Command:%d", cmd->data[0]);
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_AUTO_SLEEP_MODE, &param, 1);
+	if (ret)
+		BT_ERR("PSMODE command failed\n");
 
 	return 0;
 }
@@ -276,37 +254,11 @@ EXPORT_SYMBOL_GPL(btmrvl_enable_ps);
 
 int btmrvl_enable_hs(struct btmrvl_private *priv)
 {
-	struct sk_buff *skb;
-	struct btmrvl_cmd *cmd;
-	int ret = 0;
-
-	skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
-	if (skb == NULL) {
-		BT_ERR("No free skb");
-		return -ENOMEM;
-	}
-
-	cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
-	cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, BT_CMD_HOST_SLEEP_ENABLE));
-	cmd->length = 0;
-
-	bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
-
-	skb->dev = (void *) priv->btmrvl_dev.hcidev;
-	skb_queue_head(&priv->adapter->tx_queue, skb);
-
-	BT_DBG("Queue hs enable Command");
-
-	wake_up_interruptible(&priv->main_thread.wait_q);
+	int ret;
 
-	if (!wait_event_interruptible_timeout(priv->adapter->cmd_wait_q,
-			priv->adapter->hs_state,
-			msecs_to_jiffies(WAIT_UNTIL_HS_STATE_CHANGED))) {
-		ret = -ETIMEDOUT;
-		BT_ERR("timeout: %d, %d,%d", priv->adapter->hs_state,
-						priv->adapter->ps_state,
-						priv->adapter->wakeup_tries);
-	}
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_HOST_SLEEP_ENABLE, NULL, 0);
+	if (ret)
+		BT_ERR("Host sleep enable command failed\n");
 
 	return ret;
 }
@@ -403,26 +355,12 @@ static void btmrvl_free_adapter(struct btmrvl_private *priv)
 	priv->adapter = NULL;
 }
 
-static int btmrvl_ioctl(struct hci_dev *hdev,
-				unsigned int cmd, unsigned long arg)
+static int btmrvl_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
 {
-	return -ENOIOCTLCMD;
-}
-
-static int btmrvl_send_frame(struct sk_buff *skb)
-{
-	struct hci_dev *hdev = (struct hci_dev *) skb->dev;
-	struct btmrvl_private *priv = NULL;
+	struct btmrvl_private *priv = hci_get_drvdata(hdev);
 
 	BT_DBG("type=%d, len=%d", skb->pkt_type, skb->len);
 
-	if (!hdev) {
-		BT_ERR("Frame for unknown HCI device");
-		return -ENODEV;
-	}
-
-	priv = hci_get_drvdata(hdev);
-
 	if (!test_bit(HCI_RUNNING, &hdev->flags)) {
 		BT_ERR("Failed testing HCI_RUNING, flags=%lx", hdev->flags);
 		print_hex_dump_bytes("data: ", DUMP_PREFIX_OFFSET,
@@ -480,6 +418,137 @@ static int btmrvl_open(struct hci_dev *hdev)
 }
 
 /*
+ * This function parses provided calibration data input. It should contain
+ * hex bytes separated by space or new line character. Here is an example.
+ * 00 1C 01 37 FF FF FF FF 02 04 7F 01
+ * CE BA 00 00 00 2D C6 C0 00 00 00 00
+ * 00 F0 00 00
+ */
+static int btmrvl_parse_cal_cfg(const u8 *src, u32 len, u8 *dst, u32 dst_size)
+{
+	const u8 *s = src;
+	u8 *d = dst;
+	int ret;
+	u8 tmp[3];
+
+	tmp[2] = '\0';
+	while ((s - src) <= len - 2) {
+		if (isspace(*s)) {
+			s++;
+			continue;
+		}
+
+		if (isxdigit(*s)) {
+			if ((d - dst) >= dst_size) {
+				BT_ERR("calibration data file too big!!!");
+				return -EINVAL;
+			}
+
+			memcpy(tmp, s, 2);
+
+			ret = kstrtou8(tmp, 16, d++);
+			if (ret < 0)
+				return ret;
+
+			s += 2;
+		} else {
+			return -EINVAL;
+		}
+	}
+	if (d == dst)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int btmrvl_load_cal_data(struct btmrvl_private *priv,
+				u8 *config_data)
+{
+	int i, ret;
+	u8 data[BT_CMD_DATA_SIZE];
+
+	data[0] = 0x00;
+	data[1] = 0x00;
+	data[2] = 0x00;
+	data[3] = BT_CMD_DATA_SIZE - 4;
+
+	/* Swap cal-data bytes. Each four bytes are swapped. Considering 4
+	 * byte SDIO header offset, mapping of input and output bytes will be
+	 * {3, 2, 1, 0} -> {0+4, 1+4, 2+4, 3+4},
+	 * {7, 6, 5, 4} -> {4+4, 5+4, 6+4, 7+4} */
+	for (i = 4; i < BT_CMD_DATA_SIZE; i++)
+		data[i] = config_data[(i / 4) * 8 - 1 - i];
+
+	print_hex_dump_bytes("Calibration data: ",
+			     DUMP_PREFIX_OFFSET, data, BT_CMD_DATA_SIZE);
+
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_LOAD_CONFIG_DATA, data,
+				   BT_CMD_DATA_SIZE);
+	if (ret)
+		BT_ERR("Failed to download caibration data\n");
+
+	return 0;
+}
+
+static int
+btmrvl_process_cal_cfg(struct btmrvl_private *priv, u8 *data, u32 size)
+{
+	u8 cal_data[BT_CAL_DATA_SIZE];
+	int ret;
+
+	ret = btmrvl_parse_cal_cfg(data, size, cal_data, sizeof(cal_data));
+	if (ret)
+		return ret;
+
+	ret = btmrvl_load_cal_data(priv, cal_data);
+	if (ret) {
+		BT_ERR("Fail to load calibrate data");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int btmrvl_cal_data_config(struct btmrvl_private *priv)
+{
+	const struct firmware *cfg;
+	int ret;
+	const char *cal_data = priv->btmrvl_dev.cal_data;
+
+	if (!cal_data)
+		return 0;
+
+	ret = request_firmware(&cfg, cal_data, priv->btmrvl_dev.dev);
+	if (ret < 0) {
+		BT_DBG("Failed to get %s file, skipping cal data download",
+		       cal_data);
+		return 0;
+	}
+
+	ret = btmrvl_process_cal_cfg(priv, (u8 *)cfg->data, cfg->size);
+	release_firmware(cfg);
+	return ret;
+}
+
+static int btmrvl_setup(struct hci_dev *hdev)
+{
+	struct btmrvl_private *priv = hci_get_drvdata(hdev);
+
+	btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
+
+	if (btmrvl_cal_data_config(priv))
+		BT_ERR("Set cal data failed");
+
+	priv->btmrvl_dev.psmode = 1;
+	btmrvl_enable_ps(priv);
+
+	priv->btmrvl_dev.gpio_gap = 0xffff;
+	btmrvl_send_hscfg_cmd(priv);
+
+	return 0;
+}
+
+/*
  * This function handles the event generated by firmware, rx data
  * received from firmware, and tx data sent from kernel.
  */
@@ -566,14 +635,12 @@ int btmrvl_register_hdev(struct btmrvl_private *priv)
 	priv->btmrvl_dev.hcidev = hdev;
 	hci_set_drvdata(hdev, priv);
 
-	hdev->bus = HCI_SDIO;
-	hdev->open = btmrvl_open;
+	hdev->bus   = HCI_SDIO;
+	hdev->open  = btmrvl_open;
 	hdev->close = btmrvl_close;
 	hdev->flush = btmrvl_flush;
-	hdev->send = btmrvl_send_frame;
-	hdev->ioctl = btmrvl_ioctl;
-
-	btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
+	hdev->send  = btmrvl_send_frame;
+	hdev->setup = btmrvl_setup;
 
 	hdev->dev_type = priv->btmrvl_dev.dev_type;