summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_legacy.c
diff options
context:
space:
mode:
authorMaciej W. Rozycki <macro@orcam.me.uk>2021-03-21 20:55:22 +0100
committerJens Axboe <axboe@kernel.dk>2021-04-06 09:27:30 -0600
commit426e2c6a2c383c9b1f9c74b7815252da89b3b8ab (patch)
tree8fbcdb71f38fb8311a9fe071e2e121941abdc365 /drivers/ata/pata_legacy.c
parentfa4b42b2a968dc137f15e3104a3ec669875dd669 (diff)
downloadlinux-426e2c6a2c383c9b1f9c74b7815252da89b3b8ab.tar.bz2
pata_legacy: Properly document module parameters
Most pata_legacy module parameters lack MODULE_PARM_DESC documentation and none is described in kernel-parameters.txt. Also several comments are inaccurate or wrong. Add the missing documentation pieces then and reorder parameters into a consistent block. Remove inaccuracies as follows: - `all' affects primary and secondary port ranges only rather than all, - `probe_all' affects tertiary and further port ranges rather than all, - `ht6560b' is for HT 6560B rather than HT 6560A. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2103211909560.21463@angie.orcam.me.uk Signed-off-by: Jens Axboe <axboe@kernel.dk>
Diffstat (limited to 'drivers/ata/pata_legacy.c')
-rw-r--r--drivers/ata/pata_legacy.c92
1 files changed, 56 insertions, 36 deletions
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index a7235bde6ae8..7d59ffbe6f0a 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -63,7 +63,62 @@
static int all;
module_param(all, int, 0444);
-MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)");
+MODULE_PARM_DESC(all,
+ "Set to probe unclaimed pri/sec ISA port ranges even if PCI");
+
+static int probe_all;
+module_param(probe_all, int, 0);
+MODULE_PARM_DESC(probe_all,
+ "Set to probe tertiary+ ISA port ranges even if PCI");
+
+static int autospeed;
+module_param(autospeed, int, 0);
+MODULE_PARM_DESC(autospeed, "Chip present that snoops speed changes");
+
+static int pio_mask = ATA_PIO4;
+module_param(pio_mask, int, 0);
+MODULE_PARM_DESC(pio_mask, "PIO range for autospeed devices");
+
+static int iordy_mask = 0xFFFFFFFF;
+module_param(iordy_mask, int, 0);
+MODULE_PARM_DESC(iordy_mask, "Use IORDY if available");
+
+static int ht6560a;
+module_param(ht6560a, int, 0);
+MODULE_PARM_DESC(ht6560a, "HT 6560A on primary 1, second 2, both 3");
+
+static int ht6560b;
+module_param(ht6560b, int, 0);
+MODULE_PARM_DESC(ht6560b, "HT 6560B on primary 1, secondary 2, both 3");
+
+static int opti82c611a;
+module_param(opti82c611a, int, 0);
+MODULE_PARM_DESC(opti82c611a,
+ "Opti 82c611A on primary 1, secondary 2, both 3");
+
+static int opti82c46x;
+module_param(opti82c46x, int, 0);
+MODULE_PARM_DESC(opti82c46x,
+ "Opti 82c465MV on primary 1, secondary 2, both 3");
+
+#ifdef CONFIG_PATA_QDI_MODULE
+static int qdi = 1;
+#else
+static int qdi;
+#endif
+module_param(qdi, int, 0);
+MODULE_PARM_DESC(qdi, "Set to probe QDI controllers");
+
+#ifdef CONFIG_PATA_WINBOND_VLB_MODULE
+static int winbond = 1;
+#else
+static int winbond;
+#endif
+module_param(winbond, int, 0);
+MODULE_PARM_DESC(winbond,
+ "Set to probe Winbond controllers, "
+ "give I/O port if non standard");
+
enum controller {
BIOS = 0,
@@ -117,30 +172,6 @@ static struct ata_host *legacy_host[NR_HOST];
static int nr_legacy_host;
-static int probe_all; /* Set to check all ISA port ranges */
-static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */
-static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */
-static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */
-static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */
-static int autospeed; /* Chip present which snoops speed changes */
-static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */
-static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
-
-/* Set to probe QDI controllers */
-#ifdef CONFIG_PATA_QDI_MODULE
-static int qdi = 1;
-#else
-static int qdi;
-#endif
-
-#ifdef CONFIG_PATA_WINBOND_VLB_MODULE
-static int winbond = 1; /* Set to probe Winbond controllers,
- give I/O port if non standard */
-#else
-static int winbond; /* Set to probe Winbond controllers,
- give I/O port if non standard */
-#endif
-
/**
* legacy_probe_add - Add interface to probe list
* @port: Controller port
@@ -1250,16 +1281,5 @@ MODULE_VERSION(DRV_VERSION);
MODULE_ALIAS("pata_qdi");
MODULE_ALIAS("pata_winbond");
-module_param(probe_all, int, 0);
-module_param(autospeed, int, 0);
-module_param(ht6560a, int, 0);
-module_param(ht6560b, int, 0);
-module_param(opti82c611a, int, 0);
-module_param(opti82c46x, int, 0);
-module_param(qdi, int, 0);
-module_param(winbond, int, 0);
-module_param(pio_mask, int, 0);
-module_param(iordy_mask, int, 0);
-
module_init(legacy_init);
module_exit(legacy_exit);