diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/acpi/hardware/hwregs.c | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/acpi/hardware/hwregs.c')
-rw-r--r-- | drivers/acpi/hardware/hwregs.c | 850 |
1 files changed, 850 insertions, 0 deletions
diff --git a/drivers/acpi/hardware/hwregs.c b/drivers/acpi/hardware/hwregs.c new file mode 100644 index 000000000000..91af0c2ddcf7 --- /dev/null +++ b/drivers/acpi/hardware/hwregs.c @@ -0,0 +1,850 @@ + +/******************************************************************************* + * + * Module Name: hwregs - Read/write access functions for the various ACPI + * control and status registers. + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2005, R. Byron Moore + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <linux/module.h> + +#include <acpi/acpi.h> +#include <acpi/acnamesp.h> +#include <acpi/acevents.h> + +#define _COMPONENT ACPI_HARDWARE + ACPI_MODULE_NAME ("hwregs") + + +/******************************************************************************* + * + * FUNCTION: acpi_hw_clear_acpi_status + * + * PARAMETERS: Flags - Lock the hardware or not + * + * RETURN: none + * + * DESCRIPTION: Clears all fixed and general purpose status bits + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ + +acpi_status +acpi_hw_clear_acpi_status ( + u32 flags) +{ + acpi_status status; + + + ACPI_FUNCTION_TRACE ("hw_clear_acpi_status"); + + + ACPI_DEBUG_PRINT ((ACPI_DB_IO, "About to write %04X to %04X\n", + ACPI_BITMASK_ALL_FIXED_STATUS, + (u16) acpi_gbl_FADT->xpm1a_evt_blk.address)); + + if (flags & ACPI_MTX_LOCK) { + status = acpi_ut_acquire_mutex (ACPI_MTX_HARDWARE); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + } + + status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS, + ACPI_BITMASK_ALL_FIXED_STATUS); + if (ACPI_FAILURE (status)) { + goto unlock_and_exit; + } + + /* Clear the fixed events */ + + if (acpi_gbl_FADT->xpm1b_evt_blk.address) { + status = acpi_hw_low_level_write (16, ACPI_BITMASK_ALL_FIXED_STATUS, + &acpi_gbl_FADT->xpm1b_evt_blk); + if (ACPI_FAILURE (status)) { + goto unlock_and_exit; + } + } + + /* Clear the GPE Bits in all GPE registers in all GPE blocks */ + + status = acpi_ev_walk_gpe_list (acpi_hw_clear_gpe_block, ACPI_ISR); + +unlock_and_exit: + if (flags & ACPI_MTX_LOCK) { + (void) acpi_ut_release_mutex (ACPI_MTX_HARDWARE); + } + return_ACPI_STATUS (status); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_get_sleep_type_data + * + * PARAMETERS: sleep_state - Numeric sleep state + * *sleep_type_a - Where SLP_TYPa is returned + * *sleep_type_b - Where SLP_TYPb is returned + * + * RETURN: Status - ACPI status + * + * DESCRIPTION: Obtain the SLP_TYPa and SLP_TYPb values for the requested sleep + * state. + * + ******************************************************************************/ + +acpi_status +acpi_get_sleep_type_data ( + u8 sleep_state, + u8 *sleep_type_a, + u8 *sleep_type_b) +{ + acpi_status status = AE_OK; + struct acpi_parameter_info info; + + + ACPI_FUNCTION_TRACE ("acpi_get_sleep_type_data"); + + + /* + * Validate parameters + */ + if ((sleep_state > ACPI_S_STATES_MAX) || + !sleep_type_a || !sleep_type_b) { + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + /* + * Evaluate the namespace object containing the values for this state + */ + info.parameters = NULL; + status = acpi_ns_evaluate_by_name ((char *) acpi_gbl_sleep_state_names[sleep_state], + &info); + if (ACPI_FAILURE (status)) { + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "%s while evaluating sleep_state [%s]\n", + acpi_format_exception (status), acpi_gbl_sleep_state_names[sleep_state])); + + return_ACPI_STATUS (status); + } + + /* Must have a return object */ + + if (!info.return_object) { + ACPI_REPORT_ERROR (("Missing Sleep State object\n")); + status = AE_NOT_EXIST; + } + + /* It must be of type Package */ + + else if (ACPI_GET_OBJECT_TYPE (info.return_object) != ACPI_TYPE_PACKAGE) { + ACPI_REPORT_ERROR (("Sleep State object not a Package\n")); + status = AE_AML_OPERAND_TYPE; + } + + /* The package must have at least two elements */ + + else if (info.return_object->package.count < 2) { + ACPI_REPORT_ERROR (("Sleep State package does not have at least two elements\n")); + status = AE_AML_NO_OPERAND; + } + + /* The first two elements must both be of type Integer */ + + else if ((ACPI_GET_OBJECT_TYPE (info.return_object->package.elements[0]) != ACPI_TYPE_INTEGER) || + (ACPI_GET_OBJECT_TYPE (info.return_object->package.elements[1]) != ACPI_TYPE_INTEGER)) { + ACPI_REPORT_ERROR (("Sleep State package elements are not both Integers (%s, %s)\n", + acpi_ut_get_object_type_name (info.return_object->package.elements[0]), + acpi_ut_get_object_type_name (info.return_object->package.elements[1]))); + status = AE_AML_OPERAND_TYPE; + } + else { + /* + * Valid _Sx_ package size, type, and value + */ + *sleep_type_a = (u8) (info.return_object->package.elements[0])->integer.value; + *sleep_type_b = (u8) (info.return_object->package.elements[1])->integer.value; + } + + if (ACPI_FAILURE (status)) { + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, + "While evaluating sleep_state [%s], bad Sleep object %p type %s\n", + acpi_gbl_sleep_state_names[sleep_state], info.return_object, + acpi_ut_get_object_type_name (info.return_object))); + } + + acpi_ut_remove_reference (info.return_object); + return_ACPI_STATUS (status); +} +EXPORT_SYMBOL(acpi_get_sleep_type_data); + + +/******************************************************************************* + * + * FUNCTION: acpi_hw_get_register_bit_mask + * + * PARAMETERS: register_id - Index of ACPI Register to access + * + * RETURN: The bit mask to be used when accessing the register + * + * DESCRIPTION: Map register_id into a register bit mask. + * + ******************************************************************************/ + +struct acpi_bit_register_info * +acpi_hw_get_bit_register_info ( + u32 register_id) +{ + ACPI_FUNCTION_NAME ("hw_get_bit_register_info"); + + + if (register_id > ACPI_BITREG_MAX) { + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Invalid bit_register ID: %X\n", register_id)); + return (NULL); + } + + return (&acpi_gbl_bit_register_info[register_id]); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_get_register + * + * PARAMETERS: register_id - ID of ACPI bit_register to access + * return_value - Value that was read from the register + * Flags - Lock the hardware or not + * + * RETURN: Status and the value read from specified Register. Value + * returned is normalized to bit0 (is shifted all the way right) + * + * DESCRIPTION: ACPI bit_register read function. + * + ******************************************************************************/ + +acpi_status +acpi_get_register ( + u32 register_id, + u32 *return_value, + u32 flags) +{ + u32 register_value = 0; + struct acpi_bit_register_info *bit_reg_info; + acpi_status status; + + + ACPI_FUNCTION_TRACE ("acpi_get_register"); + + + /* Get the info structure corresponding to the requested ACPI Register */ + + bit_reg_info = acpi_hw_get_bit_register_info (register_id); + if (!bit_reg_info) { + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + if (flags & ACPI_MTX_LOCK) { + status = acpi_ut_acquire_mutex (ACPI_MTX_HARDWARE); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + } + + /* Read from the register */ + + status = acpi_hw_register_read (ACPI_MTX_DO_NOT_LOCK, + bit_reg_info->parent_register, ®ister_value); + + if (flags & ACPI_MTX_LOCK) { + (void) acpi_ut_release_mutex (ACPI_MTX_HARDWARE); + } + + if (ACPI_SUCCESS (status)) { + /* Normalize the value that was read */ + + register_value = ((register_value & bit_reg_info->access_bit_mask) + >> bit_reg_info->bit_position); + + *return_value = register_value; + + ACPI_DEBUG_PRINT ((ACPI_DB_IO, "Read value %8.8X register %X\n", + register_value, bit_reg_info->parent_register)); + } + + return_ACPI_STATUS (status); +} +EXPORT_SYMBOL(acpi_get_register); + + +/******************************************************************************* + * + * FUNCTION: acpi_set_register + * + * PARAMETERS: register_id - ID of ACPI bit_register to access + * Value - (only used on write) value to write to the + * Register, NOT pre-normalized to the bit pos + * Flags - Lock the hardware or not + * + * RETURN: Status + * + * DESCRIPTION: ACPI Bit Register write function. + * + ******************************************************************************/ + +acpi_status +acpi_set_register ( + u32 register_id, + u32 value, + u32 flags) +{ + u32 register_value = 0; + struct acpi_bit_register_info *bit_reg_info; + acpi_status status; + + + ACPI_FUNCTION_TRACE_U32 ("acpi_set_register", register_id); + + + /* Get the info structure corresponding to the requested ACPI Register */ + + bit_reg_info = acpi_hw_get_bit_register_info (register_id); + if (!bit_reg_info) { + ACPI_REPORT_ERROR (("Bad ACPI HW register_id: %X\n", register_id)); + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + if (flags & ACPI_MTX_LOCK) { + status = acpi_ut_acquire_mutex (ACPI_MTX_HARDWARE); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + } + + /* Always do a register read first so we can insert the new bits */ + + status = acpi_hw_register_read (ACPI_MTX_DO_NOT_LOCK, + bit_reg_info->parent_register, ®ister_value); + if (ACPI_FAILURE (status)) { + goto unlock_and_exit; + } + + /* + * Decode the Register ID + * Register ID = [Register block ID] | [bit ID] + * + * Check bit ID to fine locate Register offset. + * Check Mask to determine Register offset, and then read-write. + */ + switch (bit_reg_info->parent_register) { + case ACPI_REGISTER_PM1_STATUS: + + /* + * Status Registers are different from the rest. Clear by + * writing 1, and writing 0 has no effect. So, the only relevant + * information is the single bit we're interested in, all others should + * be written as 0 so they will be left unchanged. + */ + value = ACPI_REGISTER_PREPARE_BITS (value, + bit_reg_info->bit_position, bit_reg_info->access_bit_mask); + if (value) { + status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK, + ACPI_REGISTER_PM1_STATUS, (u16) value); + register_value = 0; + } + break; + + + case ACPI_REGISTER_PM1_ENABLE: + + ACPI_REGISTER_INSERT_VALUE (register_value, bit_reg_info->bit_position, + bit_reg_info->access_bit_mask, value); + + status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK, + ACPI_REGISTER_PM1_ENABLE, (u16) register_value); + break; + + + case ACPI_REGISTER_PM1_CONTROL: + + /* + * Write the PM1 Control register. + * Note that at this level, the fact that there are actually TWO + * registers (A and B - and B may not exist) is abstracted. + */ + ACPI_DEBUG_PRINT ((ACPI_DB_IO, "PM1 control: Read %X\n", register_value)); + + ACPI_REGISTER_INSERT_VALUE (register_value, bit_reg_info->bit_position, + bit_reg_info->access_bit_mask, value); + + status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK, + ACPI_REGISTER_PM1_CONTROL, (u16) register_value); + break; + + + case ACPI_REGISTER_PM2_CONTROL: + + status = acpi_hw_register_read (ACPI_MTX_DO_NOT_LOCK, + ACPI_REGISTER_PM2_CONTROL, ®ister_value); + if (ACPI_FAILURE (status)) { + goto unlock_and_exit; + } + + ACPI_DEBUG_PRINT ((ACPI_DB_IO, "PM2 control: Read %X from %8.8X%8.8X\n", + register_value, + ACPI_FORMAT_UINT64 (acpi_gbl_FADT->xpm2_cnt_blk.address))); + + ACPI_REGISTER_INSERT_VALUE (register_value, bit_reg_info->bit_position, + bit_reg_info->access_bit_mask, value); + + ACPI_DEBUG_PRINT ((ACPI_DB_IO, "About to write %4.4X to %8.8X%8.8X\n", + register_value, + ACPI_FORMAT_UINT64 (acpi_gbl_FADT->xpm2_cnt_blk.address))); + + status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK, + ACPI_REGISTER_PM2_CONTROL, (u8) (register_value)); + break; + + + default: + break; + } + + +unlock_and_exit: + + if (flags & ACPI_MTX_LOCK) { + (void) acpi_ut_release_mutex (ACPI_MTX_HARDWARE); + } + + /* Normalize the value that was read */ + + ACPI_DEBUG_EXEC (register_value = ((register_value & bit_reg_info->access_bit_mask) >> bit_reg_info->bit_position)); + + ACPI_DEBUG_PRINT ((ACPI_DB_IO, "Set bits: %8.8X actual %8.8X register %X\n", + value, register_value, bit_reg_info->parent_register)); + return_ACPI_STATUS (status); +} +EXPORT_SYMBOL(acpi_set_register); + + +/****************************************************************************** + * + * FUNCTION: acpi_hw_register_read + * + * PARAMETERS: use_lock - Mutex hw access + * register_id - register_iD + Offset + * return_value - Value that was read from the register + * + * RETURN: Status and the value read. + * + * DESCRIPTION: Acpi register read function. Registers are read at the + * given offset. + * + ******************************************************************************/ + +acpi_status +acpi_hw_register_read ( + u8 use_lock, + u32 register_id, + u32 *return_value) +{ + u32 value1 = 0; + u32 value2 = 0; + acpi_status status; + + + ACPI_FUNCTION_TRACE ("hw_register_read"); + + + if (ACPI_MTX_LOCK == use_lock) { + status = acpi_ut_acquire_mutex (ACPI_MTX_HARDWARE); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + } + + switch (register_id) { + case ACPI_REGISTER_PM1_STATUS: /* 16-bit access */ + + status = acpi_hw_low_level_read (16, &value1, &acpi_gbl_FADT->xpm1a_evt_blk); + if (ACPI_FAILURE (status)) { + goto unlock_and_exit; + } + + /* PM1B is optional */ + + status = acpi_hw_low_level_read (16, &value2, &acpi_gbl_FADT->xpm1b_evt_blk); + value1 |= value2; + break; + + + case ACPI_REGISTER_PM1_ENABLE: /* 16-bit access */ + + status = acpi_hw_low_level_read (16, &value1, &acpi_gbl_xpm1a_enable); + if (ACPI_FAILURE (status)) { + goto unlock_and_exit; + } + + /* PM1B is optional */ + + status = acpi_hw_low_level_read (16, &value2, &acpi_gbl_xpm1b_enable); + value1 |= value2; + break; + + + case ACPI_REGISTER_PM1_CONTROL: /* 16-bit access */ + + status = acpi_hw_low_level_read (16, &value1, &acpi_gbl_FADT->xpm1a_cnt_blk); + if (ACPI_FAILURE (status)) { + goto unlock_and_exit; + } + + status = acpi_hw_low_level_read (16, &value2, &acpi_gbl_FADT->xpm1b_cnt_blk); + value1 |= value2; + break; + + + case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */ + + status = acpi_hw_low_level_read (8, &value1, &acpi_gbl_FADT->xpm2_cnt_blk); + break; + + + case ACPI_REGISTER_PM_TIMER: /* 32-bit access */ + + status = acpi_hw_low_level_read (32, &value1, &acpi_gbl_FADT->xpm_tmr_blk); + break; + + case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */ + + status = acpi_os_read_port (acpi_gbl_FADT->smi_cmd, &value1, 8); + break; + + default: + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unknown Register ID: %X\n", register_id)); + status = AE_BAD_PARAMETER; + break; + } + +unlock_and_exit: + if (ACPI_MTX_LOCK == use_lock) { + (void) acpi_ut_release_mutex (ACPI_MTX_HARDWARE); + } + + if (ACPI_SUCCESS (status)) { + *return_value = value1; + } + + return_ACPI_STATUS (status); +} + + +/****************************************************************************** + * + * FUNCTION: acpi_hw_register_write + * + * PARAMETERS: use_lock - Mutex hw access + * register_id - register_iD + Offset + * Value - The value to write + * + * RETURN: Status + * + * DESCRIPTION: Acpi register Write function. Registers are written at the + * given offset. + * + ******************************************************************************/ + +acpi_status +acpi_hw_register_write ( + u8 use_lock, + u32 register_id, + u32 value) +{ + acpi_status status; + + + ACPI_FUNCTION_TRACE ("hw_register_write"); + + + if (ACPI_MTX_LOCK == use_lock) { + status = acpi_ut_acquire_mutex (ACPI_MTX_HARDWARE); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + } + + switch (register_id) { + case ACPI_REGISTER_PM1_STATUS: /* 16-bit access */ + + status = acpi_hw_low_level_write (16, value, &acpi_gbl_FADT->xpm1a_evt_blk); + if (ACPI_FAILURE (status)) { + goto unlock_and_exit; + } + + /* PM1B is optional */ + + status = acpi_hw_low_level_write (16, value, &acpi_gbl_FADT->xpm1b_evt_blk); + break; + + + case ACPI_REGISTER_PM1_ENABLE: /* 16-bit access*/ + + status = acpi_hw_low_level_write (16, value, &acpi_gbl_xpm1a_enable); + if (ACPI_FAILURE (status)) { + goto unlock_and_exit; + } + + /* PM1B is optional */ + + status = acpi_hw_low_level_write (16, value, &acpi_gbl_xpm1b_enable); + break; + + + case ACPI_REGISTER_PM1_CONTROL: /* 16-bit access */ + + status = acpi_hw_low_level_write (16, value, &acpi_gbl_FADT->xpm1a_cnt_blk); + if (ACPI_FAILURE (status)) { + goto unlock_and_exit; + } + + status = acpi_hw_low_level_write (16, value, &acpi_gbl_FADT->xpm1b_cnt_blk); + break; + + + case ACPI_REGISTER_PM1A_CONTROL: /* 16-bit access */ + + status = acpi_hw_low_level_write (16, value, &acpi_gbl_FADT->xpm1a_cnt_blk); + break; + + + case ACPI_REGISTER_PM1B_CONTROL: /* 16-bit access */ + + status = acpi_hw_low_level_write (16, value, &acpi_gbl_FADT->xpm1b_cnt_blk); + break; + + + case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */ + + status = acpi_hw_low_level_write (8, value, &acpi_gbl_FADT->xpm2_cnt_blk); + break; + + + case ACPI_REGISTER_PM_TIMER: /* 32-bit access */ + + status = acpi_hw_low_level_write (32, value, &acpi_gbl_FADT->xpm_tmr_blk); + break; + + + case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */ + + /* SMI_CMD is currently always in IO space */ + + status = acpi_os_write_port (acpi_gbl_FADT->smi_cmd, value, 8); + break; + + + default: + status = AE_BAD_PARAMETER; + break; + } + +unlock_and_exit: + if (ACPI_MTX_LOCK == use_lock) { + (void) acpi_ut_release_mutex (ACPI_MTX_HARDWARE); + } + + return_ACPI_STATUS (status); +} + + +/****************************************************************************** + * + * FUNCTION: acpi_hw_low_level_read + * + * PARAMETERS: Width - 8, 16, or 32 + * Value - Where the value is returned + * Reg - GAS register structure + * + * RETURN: Status + * + * DESCRIPTION: Read from either memory or IO space. + * + ******************************************************************************/ + +acpi_status +acpi_hw_low_level_read ( + u32 width, + u32 *value, + struct acpi_generic_address *reg) +{ + u64 address; + acpi_status status; + + + ACPI_FUNCTION_NAME ("hw_low_level_read"); + + + /* + * Must have a valid pointer to a GAS structure, and + * a non-zero address within. However, don't return an error + * because the PM1A/B code must not fail if B isn't present. + */ + if (!reg) { + return (AE_OK); + } + + /* Get a local copy of the address. Handles possible alignment issues */ + + ACPI_MOVE_64_TO_64 (&address, ®->address); + if (!address) { + return (AE_OK); + } + *value = 0; + + /* + * Two address spaces supported: Memory or IO. + * PCI_Config is not supported here because the GAS struct is insufficient + */ + switch (reg->address_space_id) { + case ACPI_ADR_SPACE_SYSTEM_MEMORY: + + status = acpi_os_read_memory ( + (acpi_physical_address) address, + value, width); + break; + + + case ACPI_ADR_SPACE_SYSTEM_IO: + + status = acpi_os_read_port ((acpi_io_address) address, + value, width); + break; + + + default: + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, + "Unsupported address space: %X\n", reg->address_space_id)); + return (AE_BAD_PARAMETER); + } + + ACPI_DEBUG_PRINT ((ACPI_DB_IO, "Read: %8.8X width %2d from %8.8X%8.8X (%s)\n", + *value, width, + ACPI_FORMAT_UINT64 (address), + acpi_ut_get_region_name (reg->address_space_id))); + + return (status); +} + + +/****************************************************************************** + * + * FUNCTION: acpi_hw_low_level_write + * + * PARAMETERS: Width - 8, 16, or 32 + * Value - To be written + * Reg - GAS register structure + * + * RETURN: Status + * + * DESCRIPTION: Write to either memory or IO space. + * + ******************************************************************************/ + +acpi_status +acpi_hw_low_level_write ( + u32 width, + u32 value, + struct acpi_generic_address *reg) +{ + u64 address; + acpi_status status; + + + ACPI_FUNCTION_NAME ("hw_low_level_write"); + + + /* + * Must have a valid pointer to a GAS structure, and + * a non-zero address within. However, don't return an error + * because the PM1A/B code must not fail if B isn't present. + */ + if (!reg) { + return (AE_OK); + } + + /* Get a local copy of the address. Handles possible alignment issues */ + + ACPI_MOVE_64_TO_64 (&address, ®->address); + if (!address) { + return (AE_OK); + } + + /* + * Two address spaces supported: Memory or IO. + * PCI_Config is not supported here because the GAS struct is insufficient + */ + switch (reg->address_space_id) { + case ACPI_ADR_SPACE_SYSTEM_MEMORY: + + status = acpi_os_write_memory ( + (acpi_physical_address) address, + value, width); + break; + + + case ACPI_ADR_SPACE_SYSTEM_IO: + + status = acpi_os_write_port ((acpi_io_address) address, + value, width); + break; + + + default: + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, + "Unsupported address space: %X\n", reg->address_space_id)); + return (AE_BAD_PARAMETER); + } + + ACPI_DEBUG_PRINT ((ACPI_DB_IO, "Wrote: %8.8X width %2d to %8.8X%8.8X (%s)\n", + value, width, + ACPI_FORMAT_UINT64 (address), + acpi_ut_get_region_name (reg->address_space_id))); + + return (status); +} |