Merge tag 'imx-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX device tree update for 5.9:

- New board support: Protonic PRTI6Q/WD2/VT7/RVT and MYiR MYS-6ULX SBC.
- Update IIM, OCOTP and SD/MMC device node name to match .yaml bindings.
- Make tempmon node as child of anatop node according to hardware
  architecture.
- The vf610-zii device update: configure fiber port to 1000BaseX, add
  switch watchdog, MDIO speed and preamble.
- A series from Fabio Estevam to update imx6qdl-sabresd and
  imx6q-tbs2910 for using MDIO node and reset-assert-us.
- Align L2 cache-controller device node name with .yaml schema.
- Enable SATA support for imx6qp-sabreauto and imx6qp-sabresd board.
- A series of patches from Shengjiu Wang to enable various audio
  support on i.MX6 devices.
- Add Gateworks System Controller support for imx6qdl-gw devices.
- Change default #pwm-cells setting to <3> in the SoC dtsi files.
- Other small random changes.

* tag 'imx-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits)
  ARM: dts: vf610-zii-ssmb-spu3: Add node for switch watchdog
  ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd properties
  ARM: dts: imx6q-tbs2910: Pass reset-assert-us
  ARM: dts: imx6q-tbs2910: Add an mdio node
  ARM: dts: imx6qdl-sabresd: Pass reset-assert-us
  ARM: dts: imx6qdl-sabresd: Add an mdio node
  ARM: dts: imx6qdl-gw: add Gateworks System Controller support
  ARM: dts: imx6ull: add MYiR MYS-6ULX SBC
  ARM: dts: vf610-zii-spb4: Add node for switch watchdog
  ARM: dts: colibri-imx6: remove pinctrl-names orphan
  ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files
  ARM: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX
  ARM: dts: vf610-zii-dev-rev-c: Configure fiber port to 1000BaseX
  ARM: dts: ZII: update MDIO speed and preamble
  ARM: dts: vfxxx: Add node for CAAM
  ARM: dts: imx6qp-sabresd: enable sata
  ARM: dts: imx6qp-sabreauto: enable sata
  ARM: dts: add Protonic RVT board
  ARM: dts: add Protonic VT7 board
  ARM: dts: add Protonic WD2 board
  ...

Link: https://lore.kernel.org/r/20200720085536.24138-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

105 files changed, 4462 insertions, 266 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 1cf2b3829772..87df3c634c43 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -455,6 +455,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-pico-hobbit.dtb \
 	imx6dl-pico-nymph.dtb \
 	imx6dl-pico-pi.dtb \
+	imx6dl-prtrvt.dtb \
+	imx6dl-prtvt7.dtb \
 	imx6dl-rex-basic.dtb \
 	imx6dl-riotboard.dtb \
 	imx6dl-sabreauto.dtb \
@@ -543,6 +545,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-pico-nymph.dtb \
 	imx6q-pico-pi.dtb \
 	imx6q-pistachio.dtb \
+	imx6q-prti6q.dtb \
+	imx6q-prtwd2.dtb \
 	imx6q-rex-pro.dtb \
 	imx6q-sabreauto.dtb \
 	imx6q-sabrelite.dtb \
@@ -592,6 +596,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
 	imx6sx-sdb-reva.dtb \
 	imx6sx-sdb-sai.dtb \
 	imx6sx-sdb.dtb \
+	imx6sx-sdb-mqs.dtb \
 	imx6sx-softing-vining-2000.dtb \
 	imx6sx-udoo-neo-basic.dtb \
 	imx6sx-udoo-neo-extended.dtb \
@@ -617,6 +622,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ull-14x14-evk.dtb \
 	imx6ull-colibri-eval-v3.dtb \
 	imx6ull-colibri-wifi-eval-v3.dtb \
+	imx6ull-myir-mys-6ulx-eval.dtb \
 	imx6ull-opos6uldev.dtb \
 	imx6ull-phytec-segin-ff-rdk-nand.dtb \
 	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
index b30448cde582..9b940987864c 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/imx1.dtsi
@@ -125,7 +125,7 @@
 			};
 
 			pwm: pwm@208000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx1-pwm";
 				reg = <0x00208000 0x1000>;
 				interrupts = <34>;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index c5edff381213..18289f6fb1f3 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -442,7 +442,7 @@
 				status = "disabled";
 			};
 
-			ocotp@8002c000 {
+			efuse@8002c000 {
 				compatible = "fsl,imx23-ocotp", "fsl,ocotp";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 1123e683025c..1ab19f1268f8 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -411,7 +411,7 @@
 
 			pwm2: pwm@53fa0000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				reg = <0x53fa0000 0x4000>;
 				clocks = <&clks 106>, <&clks 52>;
 				clock-names = "ipg", "per";
@@ -430,7 +430,7 @@
 
 			pwm3: pwm@53fa8000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				reg = <0x53fa8000 0x4000>;
 				clocks = <&clks 107>, <&clks 52>;
 				clock-names = "ipg", "per";
@@ -453,7 +453,7 @@
 				interrupts = <22>;
 			};
 
-			esdhc1: esdhc@53fb4000 {
+			esdhc1: mmc@53fb4000 {
 				compatible = "fsl,imx25-esdhc";
 				reg = <0x53fb4000 0x4000>;
 				interrupts = <9>;
@@ -462,7 +462,7 @@
 				status = "disabled";
 			};
 
-			esdhc2: esdhc@53fb8000 {
+			esdhc2: mmc@53fb8000 {
 				compatible = "fsl,imx25-esdhc";
 				reg = <0x53fb8000 0x4000>;
 				interrupts = <8>;
@@ -488,7 +488,7 @@
 
 			pwm4: pwm@53fc8000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				reg = <0x53fc8000 0x4000>;
 				clocks = <&clks 108>, <&clks 52>;
 				clock-names = "ipg", "per";
@@ -535,14 +535,14 @@
 
 			pwm1: pwm@53fe0000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				reg = <0x53fe0000 0x4000>;
 				clocks = <&clks 105>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <26>;
 			};
 
-			iim: iim@53ff0000 {
+			iim: efuse@53ff0000 {
 				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <19>;
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 002cd223f22d..fc0b318f8733 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -134,7 +134,7 @@
 			};
 
 			pwm: pwm@10006000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx27-pwm";
 				reg = <0x10006000 0x1000>;
 				interrupts = <23>;
@@ -265,7 +265,7 @@
 				status = "disabled";
 			};
 
-			sdhci1: sdhci@10013000 {
+			sdhci1: mmc@10013000 {
 				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
 				reg = <0x10013000 0x1000>;
 				interrupts = <11>;
@@ -277,7 +277,7 @@
 				status = "disabled";
 			};
 
-			sdhci2: sdhci@10014000 {
+			sdhci2: mmc@10014000 {
 				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
 				reg = <0x10014000 0x1000>;
 				interrupts = <10>;
@@ -431,7 +431,7 @@
 				status = "disabled";
 			};
 
-			sdhci3: sdhci@1001e000 {
+			sdhci3: mmc@1001e000 {
 				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
 				reg = <0x1001e000 0x1000>;
 				interrupts = <9>;
@@ -540,7 +540,7 @@
 				#clock-cells = <1>;
 			};
 
-			iim: iim@10028000 {
+			iim: efuse@10028000 {
 				compatible = "fsl,imx27-iim";
 				reg = <0x10028000 0x1000>;
 				interrupts = <62>;
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index a1cbbeb39a4f..a2b799c56f8f 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -1011,7 +1011,7 @@
 				status = "disabled";
 			};
 
-			ocotp: ocotp@8002c000 {
+			ocotp: efuse@8002c000 {
 				compatible = "fsl,imx28-ocotp", "fsl,ocotp";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index 18270ec648fe..45333f7e10ea 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -173,7 +173,7 @@
 			reg = <0x50000000 0x100000>;
 			ranges;
 
-			sdhci1: sdhci@50004000 {
+			sdhci1: mmc@50004000 {
 				compatible = "fsl,imx31-mmc";
 				reg = <0x50004000 0x4000>;
 				interrupts = <9>;
@@ -184,7 +184,7 @@
 				status = "disabled";
 			};
 
-			sdhci2: sdhci@50008000 {
+			sdhci2: mmc@50008000 {
 				compatible = "fsl,imx31-mmc";
 				reg = <0x50008000 0x4000>;
 				interrupts = <8>;
@@ -217,7 +217,7 @@
 				status = "disabled";
 			};
 
-			iim: iim@5001c000 {
+			iim: efuse@5001c000 {
 				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
 				reg = <0x5001c000 0x1000>;
 				interrupts = <19>;
@@ -327,7 +327,7 @@
 				interrupts = <26>;
 				clocks = <&clks 10>, <&clks 42>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 2ebf2c1fa682..aba16252faab 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -59,7 +59,7 @@
 		interrupt-parent = <&avic>;
 		ranges;
 
-		L2: l2-cache@30000000 {
+		L2: cache-controller@30000000 {
 			compatible = "arm,l210-cache";
 			reg = <0x30000000 0x1000>;
 			cache-unified;
@@ -231,7 +231,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			esdhc1: esdhc@53fb4000 {
+			esdhc1: mmc@53fb4000 {
 				compatible = "fsl,imx35-esdhc";
 				reg = <0x53fb4000 0x4000>;
 				interrupts = <7>;
@@ -240,7 +240,7 @@
 				status = "disabled";
 			};
 
-			esdhc2: esdhc@53fb8000 {
+			esdhc2: mmc@53fb8000 {
 				compatible = "fsl,imx35-esdhc";
 				reg = <0x53fb8000 0x4000>;
 				interrupts = <8>;
@@ -249,7 +249,7 @@
 				status = "disabled";
 			};
 
-			esdhc3: esdhc@53fbc000 {
+			esdhc3: mmc@53fbc000 {
 				compatible = "fsl,imx35-esdhc";
 				reg = <0x53fbc000 0x4000>;
 				interrupts = <9>;
@@ -320,7 +320,7 @@
 				status = "disabled";
 			};
 
-			iim@53ff0000 {
+			efuse@53ff0000 {
 				compatible = "fsl,imx35-iim";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <19>;
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 1f4ecbca5225..b6b2e6af9b96 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -115,7 +115,7 @@
 				reg = <0x50000000 0x40000>;
 				ranges;
 
-				esdhc1: esdhc@50004000 {
+				esdhc1: mmc@50004000 {
 					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
 					reg = <0x50004000 0x4000>;
 					interrupts = <1>;
@@ -127,7 +127,7 @@
 					status = "disabled";
 				};
 
-				esdhc2: esdhc@50008000 {
+				esdhc2: mmc@50008000 {
 					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
 					reg = <0x50008000 0x4000>;
 					interrupts = <2>;
@@ -176,7 +176,7 @@
 					status = "disabled";
 				};
 
-				esdhc3: esdhc@50020000 {
+				esdhc3: mmc@50020000 {
 					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
 					reg = <0x50020000 0x4000>;
 					interrupts = <3>;
@@ -188,7 +188,7 @@
 					status = "disabled";
 				};
 
-				esdhc4: esdhc@50024000 {
+				esdhc4: mmc@50024000 {
 					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
 					reg = <0x50024000 0x4000>;
 					interrupts = <4>;
@@ -289,7 +289,7 @@
 			};
 
 			pwm1: pwm@53fb4000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb4000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
@@ -299,7 +299,7 @@
 			};
 
 			pwm2: pwm@53fb8000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb8000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
index 4344632f7940..6ecb83e7f336 100644
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -113,6 +113,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm_backlight>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index d3583aad8323..985e1be03ad6 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -185,7 +185,7 @@
 				reg = <0x70000000 0x40000>;
 				ranges;
 
-				esdhc1: esdhc@70004000 {
+				esdhc1: mmc@70004000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70004000 0x4000>;
 					interrupts = <1>;
@@ -196,7 +196,7 @@
 					status = "disabled";
 				};
 
-				esdhc2: esdhc@70008000 {
+				esdhc2: mmc@70008000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70008000 0x4000>;
 					interrupts = <2>;
@@ -245,7 +245,7 @@
 					status = "disabled";
 				};
 
-				esdhc3: esdhc@70020000 {
+				esdhc3: mmc@70020000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70020000 0x4000>;
 					interrupts = <3>;
@@ -257,7 +257,7 @@
 					status = "disabled";
 				};
 
-				esdhc4: esdhc@70024000 {
+				esdhc4: mmc@70024000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70024000 0x4000>;
 					interrupts = <4>;
@@ -400,7 +400,7 @@
 			};
 
 			pwm1: pwm@73fb4000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 				reg = <0x73fb4000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
@@ -410,7 +410,7 @@
 			};
 
 			pwm2: pwm@73fb8000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 				reg = <0x73fb8000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
@@ -466,7 +466,7 @@
 				reg = <0x83f00000 0x60>;
 			};
 
-			iim: iim@83f98000 {
+			iim: efuse@83f98000 {
 				compatible = "fsl,imx51-iim", "fsl,imx27-iim";
 				reg = <0x83f98000 0x4000>;
 				interrupts = <69>;
diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi
index 8b25416a5303..4508f34139a0 100644
--- a/arch/arm/boot/dts/imx53-kp.dtsi
+++ b/arch/arm/boot/dts/imx53-kp.dtsi
@@ -162,6 +162,14 @@
 	>;
 };
 
+&pwm1 {
+	#pwm-cells = <2>;
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+};
+
 &uart1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index daab56abe94a..a1a6228d1aa6 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -321,6 +321,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index 5ff9a179c83c..f7dcdf96e5c0 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -176,7 +176,7 @@
 		power-supply = <&reg_3v3_lcd>;
 	};
 
-	leds {
+	leds-brightness {
 		compatible = "pwm-leds";
 
 		alarm-brightness {
@@ -185,6 +185,32 @@
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_alarmled_pins>;
+
+		alarm1 {
+			label = "alarm:red";
+			gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		alarm2 {
+			label = "alarm:yellow";
+			gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		alarm3 {
+			label = "alarm:blue";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		alarm4 {
+			label = "alarm:silenced";
+			gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	gpio-poweroff {
 		compatible = "gpio-poweroff";
 		gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
@@ -598,12 +624,14 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
@@ -909,18 +937,10 @@
 			MX53_PAD_NANDF_CS3__GPIO6_16		0x0
 			/* POWER_AND_BOOT_STATUS_INDICATOR */
 			MX53_PAD_PATA_INTRQ__GPIO7_2		0x1e4
-			/* ACTIVATE_ALARM_LIGHT_RED */
-			MX53_PAD_PATA_DIOR__GPIO7_3		0x0
-			/* ACTIVATE_ALARM_LIGHT_YELLOW */
-			MX53_PAD_PATA_DA_1__GPIO7_7		0x0
-			/* ACTIVATE_ALARM_LIGHT_CYAN */
-			MX53_PAD_PATA_DA_2__GPIO7_8		0x0
 			/* RUNNING_ON_BATTERY_INDICATOR_GREEN */
 			MX53_PAD_GPIO_16__GPIO7_11		0x0
 			/* BATTERY_STATUS_INDICATOR_AMBER */
 			MX53_PAD_GPIO_17__GPIO7_12		0x0
-			/* AUDIO_ALARMS_SILENCED_INDICATOR */
-			MX53_PAD_GPIO_18__GPIO7_13		0x0
 		>;
 	};
 
@@ -1080,4 +1100,17 @@
 			MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC	0x180
 		>;
 	};
+
+	pinctrl_alarmled_pins: qmx6alarmledgrp {
+		fsl,pins = <
+			/* ACTIVATE_ALARM_LIGHT_RED */
+			MX53_PAD_PATA_DIOR__GPIO7_3		0x0
+			/* ACTIVATE_ALARM_LIGHT_YELLOW */
+			MX53_PAD_PATA_DA_1__GPIO7_7		0x0
+			/* ACTIVATE_ALARM_LIGHT_CYAN */
+			MX53_PAD_PATA_DA_2__GPIO7_8		0x0
+			/* AUDIO_ALARMS_SILENCED_INDICATOR */
+			MX53_PAD_GPIO_18__GPIO7_13		0x0
+		>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index ea90fd95ad01..9a6cb138adf3 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -209,6 +209,14 @@
 	};
 };
 
+&pwm1 {
+	#pwm-cells = <2>;
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 4ab135906949..7c9730f3f820 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -542,7 +542,6 @@
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
-	#pwm-cells = <3>;
 };
 
 &sdma {
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index afa57bf7b0ed..500eeaa3a27c 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -236,7 +236,7 @@
 				reg = <0x50000000 0x40000>;
 				ranges;
 
-				esdhc1: esdhc@50004000 {
+				esdhc1: mmc@50004000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50004000 0x4000>;
 					interrupts = <1>;
@@ -248,7 +248,7 @@
 					status = "disabled";
 				};
 
-				esdhc2: esdhc@50008000 {
+				esdhc2: mmc@50008000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50008000 0x4000>;
 					interrupts = <2>;
@@ -301,7 +301,7 @@
 					status = "disabled";
 				};
 
-				esdhc3: esdhc@50020000 {
+				esdhc3: mmc@50020000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50020000 0x4000>;
 					interrupts = <3>;
@@ -313,7 +313,7 @@
 					status = "disabled";
 				};
 
-				esdhc4: esdhc@50024000 {
+				esdhc4: mmc@50024000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50024000 0x4000>;
 					interrupts = <4>;
@@ -525,7 +525,7 @@
 			};
 
 			pwm1: pwm@53fb4000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb4000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
@@ -535,7 +535,7 @@
 			};
 
 			pwm2: pwm@53fb8000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb8000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
@@ -667,7 +667,7 @@
 				reg = <0x63f00000 0x60>;
 			};
 
-			iim: iim@63f98000 {
+			iim: efuse@63f98000 {
 				compatible = "fsl,imx53-iim", "fsl,imx27-iim";
 				reg = <0x63f98000 0x4000>;
 				interrupts = <69>;
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
index 37f80ab8ccd0..809ca5611072 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
@@ -79,5 +79,6 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
index 8d8c8c27e482..4d58cb4436d9 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
@@ -69,5 +69,6 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts
index 385ce7b0029e..028951955bde 100644
--- a/arch/arm/boot/dts/imx6dl-mamoj.dts
+++ b/arch/arm/boot/dts/imx6dl-mamoj.dts
@@ -303,6 +303,7 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts
new file mode 100644
index 000000000000..fa882458957b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Protonic RVT board";
+	compatible = "prt,prtrvt", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	nfc@0 {
+		compatible = "ti,trf7970a";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nfc>;
+		spi-max-frequency = <2000000>;
+		interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>;
+		ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
+				  <&gpio5 11 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_3v3>;
+		vin-voltage-override = <3100000>;
+		autosuspend-delay = <30000>;
+		irq-status-read-quirk;
+		en2-rf-quirk;
+		t5t-rmb-extra-byte-quirk;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* nc */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* nc */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_l */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_h */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			/* NFC_ASK_OOK */
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x100b1
+			/* NFC_PWR_EN */
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x100b1
+			/* NFC_EN2 */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x100b1
+			/* NFC_EN */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
+			/* NFC_MOD */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
+			/* NFC_IRQ */
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
new file mode 100644
index 000000000000..306b4f7bf762
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Protonic VT7";
+	compatible = "prt,prtvt7", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 500000>;
+		brightness-levels = <0 20 81 248 1000>;
+		default-brightness-level = <20>;
+		num-interpolated-steps = <21>;
+		power-supply = <&reg_bl_12v0>;
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		esc {
+			label = "GPIO Key ESC";
+			linux,code = <KEY_ESC>;
+			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
+		};
+
+		up {
+			label = "GPIO Key UP";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
+		};
+
+		down {
+			label = "GPIO Key DOWN";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
+		};
+
+		enter {
+			label = "GPIO Key Enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
+		};
+
+		cycle {
+			label = "GPIO Key CYCLE";
+			linux,code = <KEY_CYCLEWINDOWS>;
+			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
+		};
+
+		f1 {
+			label = "GPIO Key F1";
+			linux,code = <KEY_F1>;
+			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
+		};
+
+		f2 {
+			label = "GPIO Key F2";
+			linux,code = <KEY_F2>;
+			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
+		};
+
+		f3 {
+			label = "GPIO Key F3";
+			linux,code = <KEY_F3>;
+			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
+		};
+
+		f4 {
+			label = "GPIO Key F4";
+			linux,code = <KEY_F4>;
+			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
+		};
+
+		f5 {
+			label = "GPIO Key F5";
+			linux,code = <KEY_F5>;
+			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
+		};
+
+		f6 {
+			label = "GPIO Key F6";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
+		};
+
+		f7 {
+			label = "GPIO Key F7";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
+		};
+
+		f8 {
+			label = "GPIO Key F8";
+			linux,code = <KEY_F8>;
+			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
+		};
+
+		f9 {
+			label = "GPIO Key F9";
+			linux,code = <KEY_F9>;
+			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
+		};
+
+		f10 {
+			label = "GPIO Key F10";
+			linux,code = <KEY_F10>;
+			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_bl_12v0: regulator-bl-12v0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_bl_12v0>;
+		regulator-name = "bl-12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&i2c1 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+&i2c3 {
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	gpio_pca: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		interrupts-extended = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&ipu1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi1 {
+	#sound-dai-cells = <0>;
+	fsl,mode = "ac97-slave";
+	status = "okay";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x13070
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			/* AUDIO_nRESET */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1f0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+			/* ITU656_nRESET */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			/* ITU656_nPDN */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu1_disp: ipudisp1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xb0
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15	   0xb0
+
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xb0
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xb0
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xb0
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xb0
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xb0
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xb0
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xb0
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xb0
+
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xb0
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xb0
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xb0
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xb0
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xb0
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xb0
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xb0
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xb0
+
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xb0
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xb0
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xb0
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xb0
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xb0
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xb0
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xb0
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xb0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_bl_12v0: 12blgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 2b9423d55c37..c4a235d212b6 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -540,7 +540,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "disabled";
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index 37c63402157b..fc81f2f4b62d 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -334,6 +334,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
index a2dd7e549568..a685b1c3208f 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
@@ -253,7 +253,6 @@
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
-	#pwm-cells = <3>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi
index 83524bb99eb3..fef5d7254536 100644
--- a/arch/arm/boot/dts/imx6q-display5.dtsi
+++ b/arch/arm/boot/dts/imx6q-display5.dtsi
@@ -399,7 +399,6 @@
 };
 
 &pwm2 {
-	#pwm-cells = <3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi
index 24c8169baf44..1ade0bff681d 100644
--- a/arch/arm/boot/dts/imx6q-kp.dtsi
+++ b/arch/arm/boot/dts/imx6q-kp.dtsi
@@ -378,12 +378,14 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
index a4d295455e67..55692c73943d 100644
--- a/arch/arm/boot/dts/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/imx6q-mccmon6.dts
@@ -237,7 +237,6 @@
 };
 
 &pwm2 {
-	#pwm-cells = <3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index 69f170ff31c5..52e3567d1859 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -455,6 +455,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts
index a31b17eaf51c..7a33e54cc0f1 100644
--- a/arch/arm/boot/dts/imx6q-pistachio.dts
+++ b/arch/arm/boot/dts/imx6q-pistachio.dts
@@ -570,6 +570,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts
new file mode 100644
index 000000000000..de6cbaab8b49
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-prti6q.dts
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Protonic PRTI6Q board";
+	compatible = "prt,prti6q", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 16 64 255>;
+		num-interpolated-steps = <16>;
+		default-brightness-level = <1>;
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	can_osc: can-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-debug1 {
+			function = LED_FUNCTION_SD;
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	panel {
+		compatible = "kyo,tcg121xglp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		enable-active-high;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "regulator-WL12xx";
+		startup-delay-us = <70000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can3>;
+		clocks = <&can_osc>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <5000000>;
+	};
+
+	adc@1 {
+		compatible = "ti,adc128s052";
+		reg = <1>;
+		spi-max-frequency = <2000000>;
+		vref-supply = <&reg_3v3>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ9031RNX PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+/* DDC */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* can2_l */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can2_h */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_l */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_h */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	#sound-dai-cells = <0>;
+	fsl,mode = "ac97-slave";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	wifi {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = "38400000";
+		tcxo-clock-frequency = "19200000";
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b008
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b008
+		>;
+	};
+
+	pinctrl_can3: can3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2csgrp {
+		fsl,pins = <
+			/* ADC128S022 CS */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x10030
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
+
+			/* Phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			/* NOTE: DDC is done via I2C2, so DON'T
+			 * configure DDC pins for HDMI!
+			 */
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	/* DDC */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN		0x1b0b0
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg_id: usbotgidgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1f058
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			/* WL12xx IRQ */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x10880
+		>;
+	};
+
+	pinctrl_wifi_npd: wifinpd {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b8b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts
new file mode 100644
index 000000000000..dffafbcaa7af
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-prtwd2.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2018 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Protonic WD2 board";
+	compatible = "prt,prtwd2", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
+	};
+
+	/* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */
+	i2c@4 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4>;
+		sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <20>;	/* ~10 kHz */
+		i2c-gpio,scl-output-only;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		pause;
+		full-duplex;
+	};
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* V in */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* I charge */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* V bus  */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* nc */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_eth_chg>;
+
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x130b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
+
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__GPIO1_IO22	0x1f8b0
+			MX6QDL_PAD_ENET_MDC__GPIO1_IO31		0x1f8b0
+		>;
+	};
+
+	pinctrl_usb_eth_chg: usbethchggrp {
+		fsl,pins = <
+			/* USB charging control */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x130b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x130b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x130b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x130b0
+			>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_wifi_npd: wifinpd {
+		fsl,pins = <
+			/* WL_REG_ON */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x13069
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index bfff87ce2e1f..861e05d53157 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -99,8 +99,20 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
index c54362fcc508..a57c2e3a8435 100644
--- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
+++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
@@ -203,6 +203,7 @@
 };
 
 &pwm2 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index e34be8fabd93..dbdd7db60325 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -371,6 +371,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "disabled";
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
index b8e74ab3c993..2577eb4f535a 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -211,6 +211,7 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index 376750882ed3..d38630d4b892 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -336,6 +336,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 240b86d2eb71..0930194fd960 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -312,6 +312,7 @@
 
 /* Colibri PWM<A> */
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "disabled";
@@ -362,7 +363,6 @@
 };
 
 &usbotg {
-	pinctrl-names = "default";
 	disable-over-current;
 	dr_mode = "peripheral";
 	status = "disabled";
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index e3be453d8a4a..67042793b0ca 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -233,6 +233,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
index 70d26616d771..35e230f991f1 100644
--- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
@@ -737,14 +737,17 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 419a7cdc8ab5..7705285d9e3c 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
 		bootargs = "console=ttymxc1,115200";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -102,6 +150,103 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -126,13 +271,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -387,6 +525,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 60563ff0b7ce..a46ea98228c2 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
 		default-brightness-level = <7>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -165,6 +213,109 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -189,13 +340,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -365,6 +509,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -504,6 +649,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 8942bec65c5c..a28e79463d0c 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
 		default-brightness-level = <7>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -158,6 +206,115 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -182,13 +339,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -356,6 +506,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -486,6 +637,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index c40583dbd96d..b5f934b8a239 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
@@ -29,6 +30,53 @@
 		default-brightness-level = <7>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -195,6 +243,117 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+		};
+
+		fan-controller@2c {
+			compatible = "gw,gsc-fan";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2c>;
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -219,13 +378,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -419,6 +571,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default", "state_dio";
 	pinctrl-0 = <&pinctrl_pwm4_backlight>;
 	pinctrl-1 = <&pinctrl_pwm4_dio>;
@@ -571,6 +724,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index c38e86eedcc0..ea41875da689 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -47,6 +47,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/media/tda1997x.h>
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
@@ -63,6 +64,53 @@
 		bootargs = "console=ttymxc1,115200";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -167,6 +215,97 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8a";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0b";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -191,13 +330,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -464,6 +596,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index bb3597132c62..0da6e6f7482b 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
 		bootargs = "console=ttymxc1,115200";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -92,6 +140,103 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -116,13 +261,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -305,6 +443,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index ee85031c3916..db30de5d6490 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -46,6 +46,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -61,6 +62,53 @@
 		stdout-path = &uart2;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -130,11 +178,101 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	gpio: pca9555@23 {
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8a";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0b";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
 		compatible = "nxp,pca9555";
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
 	};
 
 	eeprom1: eeprom@50 {
@@ -428,6 +566,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index 69ca70d3baa8..d6b074597518 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -88,6 +88,53 @@
 		default-on;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -243,6 +290,115 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an2";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -267,13 +423,6 @@
 		pagesize = <16>;
 	};
 
-	pca9555: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	ds1672: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -471,6 +620,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -608,6 +758,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index aee9221f0f29..fbe6c32bd756 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -46,6 +46,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	chosen {
@@ -71,6 +72,53 @@
 		default-brightness-level = <100>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -183,11 +231,101 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pca9555: gpio@23 {
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
 		compatible = "nxp,pca9555";
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
 	};
 
 	eeprom1: eeprom@50 {
@@ -365,6 +503,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 76d6cf57f1c3..23c6e4047621 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -46,6 +46,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -68,6 +69,53 @@
 		default-brightness-level = <7>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -205,11 +253,101 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pca9555: gpio@23 {
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
 		compatible = "nxp,pca9555";
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
 	};
 
 	eeprom1: eeprom@50 {
@@ -401,6 +539,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -503,6 +642,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
index 0bdebddffd51..b1ff7c859c4d 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
 		stdout-path = &uart2;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -102,11 +150,101 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	gpio@23 {
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
 		compatible = "nxp,pca9555";
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
 	};
 
 	eeprom@50 {
@@ -133,7 +271,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 0857de505192..11f84ee7b88f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -22,6 +23,53 @@
 		reg = <0x10000000 0x20000000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -111,11 +159,121 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	gpio@23 {
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <800000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <22100 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_3p0";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_soc";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_1p5";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_1p8";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_1p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@9c {
+				gw,mode = <2>;
+				reg = <0x9c>;
+				label = "vdd_an1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
 		compatible = "nxp,pca9555";
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
 	};
 
 	eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
index 8c57fd2f9a0b..0a1ffff9eb75 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
 		stdout-path = &uart2;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -106,11 +154,109 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	gpio@23 {
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+
+		fan-controller@a {
+			compatible = "gw,gsc-fan";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0a>;
+		};
+	};
+
+	gsc_gpio: gpio@23 {
 		compatible = "nxp,pca9555";
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
 	};
 
 	eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index 635c203bd64d..d62a8da49367 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
 		stdout-path = &uart2;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -87,11 +135,114 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	gpio@23 {
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <800000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <22100 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_arm";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_soc";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p5";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_1p0";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_3p0";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_an1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
 		compatible = "nxp,pca9555";
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
 	};
 
 	eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 756f3a9f1b4f..f2f475ea74e0 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -245,6 +245,7 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index 2418cf8f2317..d526f01a2c52 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -497,6 +497,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -509,6 +510,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index c3415aa348a2..185a1a31ca39 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -736,12 +736,14 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
@@ -754,6 +756,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index ed53f07c6b7b..4bbe54e1ddb5 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -639,6 +639,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -651,6 +652,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 8b0e432099b5..c63e1bc1ad3a 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -596,6 +596,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -608,6 +609,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
index 9ebd438dce7d..019938562aa9 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
@@ -218,6 +218,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
new file mode 100644
index 000000000000..19578f660b09
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_h1_vbus: regulator-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b008
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b008
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC	0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index cf628465cd0a..55f736dbee0b 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -800,6 +800,7 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 8468216dae9b..95f9ddab5996 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -687,18 +687,21 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 28b35ccb3757..68b3e68cb8df 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -203,9 +203,21 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
 	fsl,magic-packet;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
 };
 
 &hdmi {
@@ -729,6 +741,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
index a616e3c400d3..02e6d36e85fa 100644
--- a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
@@ -140,6 +140,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index c68cb90fd801..362e65ccaa78 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -738,14 +738,12 @@
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
-	#pwm-cells = <3>;
 	status = "disabled";
 };
 
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
-	#pwm-cells = <3>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 20350e803377..5af9ce977b12 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -719,6 +719,8 @@
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
 		status = "okay";
 
 		switch: switch@0 {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 32114cf6acee..43edbf1156c7 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -69,17 +69,6 @@
 		};
 	};
 
-	tempmon: tempmon {
-		compatible = "fsl,imx6q-tempmon";
-		interrupt-parent = <&gpc>;
-		interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,tempmon = <&anatop>;
-		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-		nvmem-cell-names = "calib", "temp_grade";
-		clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-		#thermal-sensor-cells = <0>;
-	};
-
 	ldb: ldb {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -256,7 +245,7 @@
 			interrupt-parent = <&intc>;
 		};
 
-		L2: l2-cache@a02000 {
+		L2: cache-controller@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -510,7 +499,7 @@
 			};
 
 			pwm1: pwm@2080000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02080000 0x4000>;
 				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -521,7 +510,7 @@
 			};
 
 			pwm2: pwm@2084000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02084000 0x4000>;
 				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -532,7 +521,7 @@
 			};
 
 			pwm3: pwm@2088000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02088000 0x4000>;
 				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -543,7 +532,7 @@
 			};
 
 			pwm4: pwm@208c000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x0208c000 0x4000>;
 				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -795,6 +784,17 @@
 					anatop-min-voltage = <725000>;
 					anatop-max-voltage = <1450000>;
 				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6q-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+					#thermal-sensor-cells = <0>;
+				};
 			};
 
 			usbphy1: usbphy@20c9000 {
@@ -871,8 +871,7 @@
 				reg = <0x020dc000 0x4000>;
 				interrupt-controller;
 				#interrupt-cells = <3>;
-				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 90 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&intc>;
 				clocks = <&clks IMX6QDL_CLK_IPG>;
 				clock-names = "ipg";
@@ -1057,7 +1056,7 @@
 					     <0 126 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			usdhc1: usdhc@2190000 {
+			usdhc1: mmc@2190000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -1069,7 +1068,7 @@
 				status = "disabled";
 			};
 
-			usdhc2: usdhc@2194000 {
+			usdhc2: mmc@2194000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -1081,7 +1080,7 @@
 				status = "disabled";
 			};
 
-			usdhc3: usdhc@2198000 {
+			usdhc3: mmc@2198000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -1093,7 +1092,7 @@
 				status = "disabled";
 			};
 
-			usdhc4: usdhc@219c000 {
+			usdhc4: mmc@219c000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -1162,7 +1161,7 @@
 				status = "disabled";
 			};
 
-			ocotp: ocotp-ctrl@21bc000 {
+			ocotp: efuse@21bc000 {
 				compatible = "fsl,imx6q-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 				clocks = <&clks IMX6QDL_CLK_IIM>;
diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts
index d4caeeb0af70..639d9dd35377 100644
--- a/arch/arm/boot/dts/imx6qp-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts
@@ -50,6 +50,10 @@
 	status = "disabled";
 };
 
+&sata {
+	status = "okay";
+};
+
 &vgen3_reg {
 	regulator-always-on;
 };
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
index f1b9cb104fdd..480e73183f6b 100644
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -53,3 +53,7 @@
 &pcie {
 	status = "disabled";
 };
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index bc86cfaaa9c2..b1b069e723d2 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -575,6 +575,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 911d8cf77f2c..1c7180f28539 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -93,16 +93,6 @@
 		};
 	};
 
-	tempmon: tempmon {
-		compatible = "fsl,imx6q-tempmon";
-		interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-parent = <&gpc>;
-		fsl,tempmon = <&anatop>;
-		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-		nvmem-cell-names = "calib", "temp_grade";
-		clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
-	};
-
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupt-parent = <&gpc>;
@@ -136,7 +126,7 @@
 			interrupt-parent = <&intc>;
 		};
 
-		L2: l2-cache@a02000 {
+		L2: cache-controller@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -344,7 +334,7 @@
 			};
 
 			pwm1: pwm@2080000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 				reg = <0x02080000 0x4000>;
 				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -354,7 +344,7 @@
 			};
 
 			pwm2: pwm@2084000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 				reg = <0x02084000 0x4000>;
 				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -364,7 +354,7 @@
 			};
 
 			pwm3: pwm@2088000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 				reg = <0x02088000 0x4000>;
 				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -374,7 +364,7 @@
 			};
 
 			pwm4: pwm@208c000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 				reg = <0x0208c000 0x4000>;
 				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -628,6 +618,16 @@
 					anatop-min-voltage = <725000>;
 					anatop-max-voltage = <1450000>;
 				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6q-tempmon";
+					interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-parent = <&gpc>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
+				};
 			};
 
 			usbphy1: usbphy@20c9000 {
@@ -854,7 +854,7 @@
 				status = "disabled";
 			};
 
-			usdhc1: usdhc@2190000 {
+			usdhc1: mmc@2190000 {
 				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -866,7 +866,7 @@
 				status = "disabled";
 			};
 
-			usdhc2: usdhc@2194000 {
+			usdhc2: mmc@2194000 {
 				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -878,7 +878,7 @@
 				status = "disabled";
 			};
 
-			usdhc3: usdhc@2198000 {
+			usdhc3: mmc@2198000 {
 				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -890,7 +890,7 @@
 				status = "disabled";
 			};
 
-			usdhc4: usdhc@219c000 {
+			usdhc4: mmc@219c000 {
 				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -952,7 +952,7 @@
 				status = "disabled";
 			};
 
-			ocotp: ocotp-ctrl@21bc000 {
+			ocotp: efuse@21bc000 {
 				compatible = "fsl,imx6sl-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 				clocks = <&clks IMX6SL_CLK_OCOTP>;
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index 5ace9e6acf85..c755cbdb7cde 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -260,6 +260,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index edd3abb9a9f1..fb5d3bc50c6b 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -105,16 +105,6 @@
 		clock-output-names = "ipp_di1";
 	};
 
-	tempmon: temperature-sensor {
-		compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
-		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-parent = <&gpc>;
-		fsl,tempmon = <&anatop>;
-		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-		nvmem-cell-names = "calib", "temp_grade";
-		clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
-	};
-
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -136,7 +126,7 @@
 			interrupt-parent = <&intc>;
 		};
 
-		L2: l2-cache@a02000 {
+		L2: cache-controller@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -271,7 +261,7 @@
 					status = "disabled";
 				};
 
-				ssi1: ssi-controller@2028000 {
+				ssi1: ssi@2028000 {
 					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
 					reg = <0x02028000 0x4000>;
 					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
@@ -284,7 +274,7 @@
 					status = "disabled";
 				};
 
-				ssi2: ssi-controller@202c000 {
+				ssi2: ssi@202c000 {
 					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
 					reg = <0x0202c000 0x4000>;
 					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@@ -297,7 +287,7 @@
 					status = "disabled";
 				};
 
-				ssi3: ssi-controller@2030000 {
+				ssi3: ssi@2030000 {
 					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
 					reg = <0x02030000 0x4000>;
 					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -331,7 +321,7 @@
 				clocks = <&clks IMX6SLL_CLK_PWM1>,
 					 <&clks IMX6SLL_CLK_PWM1>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm2: pwm@2084000 {
@@ -341,7 +331,7 @@
 				clocks = <&clks IMX6SLL_CLK_PWM2>,
 					 <&clks IMX6SLL_CLK_PWM2>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm3: pwm@2088000 {
@@ -351,7 +341,7 @@
 				clocks = <&clks IMX6SLL_CLK_PWM3>,
 					 <&clks IMX6SLL_CLK_PWM3>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm4: pwm@208c000 {
@@ -361,7 +351,7 @@
 				clocks = <&clks IMX6SLL_CLK_PWM4>,
 					 <&clks IMX6SLL_CLK_PWM4>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			gpt1: timer@2098000 {
@@ -531,6 +521,16 @@
 					anatop-max-voltage = <3400000>;
 					anatop-enable-bit = <0>;
 				};
+
+				tempmon: temperature-sensor {
+					compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-parent = <&gpc>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+				};
 			};
 
 			usbphy1: usb-phy@20c9000 {
@@ -786,7 +786,7 @@
 				clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>;
 			};
 
-			ocotp: ocotp-ctrl@21bc000 {
+			ocotp: efuse@21bc000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6sll-ocotp", "syscon";
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index d84ea6999377..66af78e83b70 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -229,6 +229,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 825924448ab4..76a4c06e0ff2 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -66,12 +66,68 @@
 		enable-active-high;
 		vin-supply = <&reg_can_en>;
 	};
+
+	reg_cs42888: cs42888_supply {
+		compatible = "regulator-fixed";
+		regulator-name = "cs42888_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx6-sabreauto-cs42888",
+			     "fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&cs42888>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+	};
 };
 
 &anaclk2 {
 	clock-frequency = <24576000>;
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6SX_PLL4_BYPASS_SRC>,
+			  <&clks IMX6SX_PLL4_BYPASS>,
+			  <&clks IMX6SX_CLK_PLL4_POST_DIV>;
+	assigned-clock-parents = <&clks IMX6SX_CLK_LVDS2_IN>,
+				 <&clks IMX6SX_PLL4_BYPASS_SRC>;
+	assigned-clock-rates = <0>, <0>, <24576000>;
+};
+
+&esai {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai>;
+	assigned-clocks = <&clks IMX6SX_CLK_ESAI_SEL>,
+			<&clks IMX6SX_CLK_ESAI_EXTAL>;
+	assigned-clock-parents = <&clks IMX6SX_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
@@ -193,6 +249,21 @@
 		>;
 	};
 
+	pinctrl_esai: esaigrp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK   0x1b030
+			MX6SX_PAD_CSI_DATA01__ESAI_TX_FS    0x1b030
+			MX6SX_PAD_CSI_HSYNC__ESAI_TX0       0x1b030
+			MX6SX_PAD_CSI_DATA04__ESAI_TX1      0x1b030
+			MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3  0x1b030
+			MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2  0x1b030
+			MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK   0x1b030
+			MX6SX_PAD_CSI_DATA03__ESAI_RX_FS    0x1b030
+			MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0   0x1b030
+			MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1  0x1b030
+		>;
+	};
+
 	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6SX_PAD_QSPI1B_DQS__CAN1_TX   0x1b020
@@ -227,6 +298,12 @@
 		>;
 	};
 
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6SX_PAD_ENET2_COL__SPDIF_IN           0x1b0b0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX		0x1b0b1
@@ -313,6 +390,17 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
+	cs42888: cs42888@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&anaclk2 0>;
+		clock-names = "mclk";
+		VA-supply = <&reg_cs42888>;
+		VD-supply = <&reg_cs42888>;
+		VLS-supply = <&reg_cs42888>;
+		VLC-supply = <&reg_cs42888>;
+	};
+
 	touchscreen@4 {
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
@@ -454,6 +542,14 @@
 	};
 };
 
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
 &wdog1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb-mqs.dts b/arch/arm/boot/dts/imx6sx-sdb-mqs.dts
new file mode 100644
index 000000000000..a4ab2d3e960c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sdb-mqs.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+
+#include "imx6sx-sdb.dts"
+/ {
+
+	sound {
+		status = "disabled";
+	};
+
+	sound-mqs {
+		compatible = "fsl,imx6sx-sdb-mqs",
+			     "fsl,imx-audio-mqs";
+		model = "mqs-audio";
+		audio-cpu = <&sai1>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&mqs>;
+	};
+};
+
+&usdhc2 {
+	/* pin conflict with mqs*/
+	status = "disabled";
+};
+
+&mqs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mqs>;
+	clocks = <&clks IMX6SX_CLK_SAI1>;
+	clock-names = "mclk";
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-0 = <>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "disabled";
+};
+
+&sdma {
+	gpr = <&gpr>;
+	/* SDMA event remap for SAI1 */
+	fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
+};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index 3e5fb72f21fc..661f803983a1 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -179,6 +179,15 @@
 			};
 		};
 	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif",
+			   "fsl,imx6sx-sdb-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+
 };
 
 &audmux {
@@ -281,6 +290,7 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
@@ -296,6 +306,14 @@
 	status = "disabled";
 };
 
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
 &ssi2 {
 	status = "okay";
 };
@@ -505,6 +523,13 @@
 			>;
 		};
 
+		pinctrl_mqs: mqsgrp {
+			fsl,pins = <
+				MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0
+				MX6SX_PAD_SD2_CMD__MQS_LEFT  0x120b0
+			>;
+		};
+
 		pinctrl_pcie: pciegrp {
 			fsl,pins = <
 				MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
@@ -562,6 +587,12 @@
 			>;
 		};
 
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6SX_PAD_SD4_DATA4__SPDIF_OUT          0x1b0b0
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
index 6b728b03f1f2..d25e27d0315f 100644
--- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
@@ -505,18 +505,21 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
 };
 
 &pwm6 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm6>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 94e3df47d1ad..b480dfa9e251 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -134,14 +134,10 @@
 		clock-output-names = "anaclk2";
 	};
 
-	tempmon: tempmon {
-		compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
-		interrupt-parent = <&gpc>;
-		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,tempmon = <&anatop>;
-		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-		nvmem-cell-names = "calib", "temp_grade";
-		clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+	mqs: mqs {
+		compatible = "fsl,imx6sx-mqs";
+		gpr = <&gpr>;
+		status = "disabled";
 	};
 
 	pmu {
@@ -183,7 +179,7 @@
 			interrupt-parent = <&intc>;
 		};
 
-		L2: l2-cache@a02000 {
+		L2: cache-controller@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -335,6 +331,7 @@
 				};
 
 				esai: esai@2024000 {
+					compatible = "fsl,imx6sx-esai", "fsl,imx35-esai";
 					reg = <0x02024000 0x4000>;
 					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
@@ -344,6 +341,9 @@
 						 <&clks IMX6SX_CLK_SPBA>;
 					clock-names = "core", "mem", "extal",
 						      "fsys", "spba";
+					dmas = <&sdma 23 21 0>,
+					       <&sdma 24 21 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -390,18 +390,28 @@
 				};
 
 				asrc: asrc@2034000 {
+					compatible = "fsl,imx6sx-asrc", "fsl,imx53-asrc";
 					reg = <0x02034000 0x4000>;
 					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
-						 <&clks IMX6SX_CLK_ASRC_IPG>,
-						 <&clks IMX6SX_CLK_SPDIF>,
-						 <&clks IMX6SX_CLK_SPBA>;
-					clock-names = "mem", "ipg", "asrck", "spba";
-					dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
-					       <&sdma 19 20 1>, <&sdma 20 20 1>,
-					       <&sdma 21 20 1>, <&sdma 22 20 1>;
+					clocks = <&clks IMX6SX_CLK_ASRC_IPG>,
+						<&clks IMX6SX_CLK_ASRC_MEM>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>,
+						<&clks IMX6SX_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck_0",
+						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+						"asrck_d", "asrck_e", "asrck_f", "spba";
+					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>,
+					       <&sdma 19 23 1>, <&sdma 20 23 1>,
+					       <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 						    "txa", "txb", "txc";
+					fsl,asrc-rate  = <48000>;
+					fsl,asrc-width = <16>;
 					status = "okay";
 				};
 			};
@@ -413,7 +423,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM1>,
 					 <&clks IMX6SX_CLK_PWM1>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm2: pwm@2084000 {
@@ -423,7 +433,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM2>,
 					 <&clks IMX6SX_CLK_PWM2>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm3: pwm@2088000 {
@@ -433,7 +443,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM3>,
 					 <&clks IMX6SX_CLK_PWM3>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm4: pwm@208c000 {
@@ -443,7 +453,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM4>,
 					 <&clks IMX6SX_CLK_PWM4>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			flexcan1: can@2090000 {
@@ -696,6 +706,16 @@
 					anatop-min-voltage = <725000>;
 					anatop-max-voltage = <1450000>;
 				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+				};
 			};
 
 			usbphy1: usbphy@20c9000 {
@@ -943,7 +963,7 @@
 				status = "disabled";
 			};
 
-			usdhc1: usdhc@2190000 {
+			usdhc1: mmc@2190000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -955,7 +975,7 @@
 				status = "disabled";
 			};
 
-			usdhc2: usdhc@2194000 {
+			usdhc2: mmc@2194000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -967,7 +987,7 @@
 				status = "disabled";
 			};
 
-			usdhc3: usdhc@2198000 {
+			usdhc3: mmc@2198000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -979,7 +999,7 @@
 				status = "disabled";
 			};
 
-			usdhc4: usdhc@219c000 {
+			usdhc4: mmc@219c000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -1055,7 +1075,7 @@
 				status = "disabled";
 			};
 
-			ocotp: ocotp-ctrl@21bc000 {
+			ocotp: efuse@21bc000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6sx-ocotp", "syscon";
@@ -1337,7 +1357,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM5>,
 					 <&clks IMX6SX_CLK_PWM5>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm6: pwm@22a8000 {
@@ -1347,7 +1367,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM6>,
 					 <&clks IMX6SX_CLK_PWM6>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm7: pwm@22ac000 {
@@ -1357,7 +1377,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM7>,
 					 <&clks IMX6SX_CLK_PWM7>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm8: pwm@22b0000 {
@@ -1367,7 +1387,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM8>,
 					 <&clks IMX6SX_CLK_PWM8>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 265bf4108cb6..64c2d1e9f7fc 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -228,6 +228,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
index 5d3805b07032..a0bbec57ddc7 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -168,6 +168,7 @@
 };
 
 &pwm5 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm5>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts
index 9f63706383a7..a0097da03f38 100644
--- a/arch/arm/boot/dts/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/imx6ul-geam.dts
@@ -195,6 +195,7 @@
 };
 
 &pwm8 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
index 18966350bfd8..935a77d717a6 100644
--- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
@@ -155,6 +155,7 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
index cc9adce638f5..14fc4828ba4e 100644
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi
@@ -187,6 +187,7 @@
 };
 
 &pwm8 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
index 5bad29683cc3..5bfad4655b22 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
@@ -41,6 +41,7 @@
 };
 
 &pwm7 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm7>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
index f05e91841202..239124fc3093 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
@@ -153,6 +153,7 @@
 };
 
 &pwm8 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi
index df1da98ab10f..357ffb2f5ad6 100644
--- a/arch/arm/boot/dts/imx6ul-pico.dtsi
+++ b/arch/arm/boot/dts/imx6ul-pico.dtsi
@@ -175,6 +175,7 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
index bb6dbfd5546b..938a32ced88d 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
@@ -549,7 +549,6 @@
 &pwm5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm5>;
-	#pwm-cells = <3>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 5379a03391bd..2b088f210331 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -131,16 +131,6 @@
 		clock-output-names = "ipp_di1";
 	};
 
-	tempmon: tempmon {
-		compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
-		interrupt-parent = <&gpc>;
-		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,tempmon = <&anatop>;
-		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-		nvmem-cell-names = "calib", "temp_grade";
-		clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
-	};
-
 	pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupt-parent = <&gpc>;
@@ -351,6 +341,31 @@
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
+
+				asrc: asrc@2034000 {
+					compatible = "fsl,imx6ul-asrc", "fsl,imx53-asrc";
+					reg = <0x2034000 0x4000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ASRC_IPG>,
+						<&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>,
+						<&clks IMX6UL_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck_0",
+						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+						"asrck_d", "asrck_e", "asrck_f", "spba";
+					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+					dma-names = "rxa", "rxb", "rxc",
+						    "txa", "txb", "txc";
+					fsl,asrc-rate  = <48000>;
+					fsl,asrc-width = <16>;
+					status = "okay";
+				};
 			};
 
 			tsc: tsc@2040000 {
@@ -371,7 +386,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM1>,
 					 <&clks IMX6UL_CLK_PWM1>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -382,7 +397,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM2>,
 					 <&clks IMX6UL_CLK_PWM2>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -393,7 +408,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM3>,
 					 <&clks IMX6UL_CLK_PWM3>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -404,7 +419,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM4>,
 					 <&clks IMX6UL_CLK_PWM4>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -612,6 +627,16 @@
 					anatop-min-voltage = <725000>;
 					anatop-max-voltage = <1450000>;
 				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+				};
 			};
 
 			usbphy1: usbphy@20c9000 {
@@ -734,7 +759,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM5>,
 					 <&clks IMX6UL_CLK_PWM5>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -745,7 +770,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM6>,
 					 <&clks IMX6UL_CLK_PWM6>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -756,7 +781,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM7>,
 					 <&clks IMX6UL_CLK_PWM7>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -767,7 +792,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM8>,
 					 <&clks IMX6UL_CLK_PWM8>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 		};
@@ -861,7 +886,7 @@
 				status = "disabled";
 			};
 
-			usdhc1: usdhc@2190000 {
+			usdhc1: mmc@2190000 {
 				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -875,7 +900,7 @@
 				status = "disabled";
 			};
 
-			usdhc2: usdhc@2194000 {
+			usdhc2: mmc@2194000 {
 				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -948,7 +973,7 @@
 				status = "disabled";
 			};
 
-			ocotp: ocotp-ctrl@21bc000 {
+			ocotp: efuse@21bc000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6ul-ocotp", "syscon";
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 9145c536d71a..6cf95939121d 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -145,25 +145,21 @@
 &pwm4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
-	#pwm-cells = <3>;
 };
 
 &pwm5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm5>;
-	#pwm-cells = <3>;
 };
 
 &pwm6 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm6>;
-	#pwm-cells = <3>;
 };
 
 &pwm7 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm7>;
-	#pwm-cells = <3>;
 };
 
 &sdma {
diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
new file mode 100644
index 000000000000..ecbb2cc5b9ab
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linumiz
+ * Author: Parthiban Nallathambi <parthiban@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-myir-mys-6ulx.dtsi"
+
+/ {
+	model = "MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND";
+	compatible = "myir,imx6ull-mys-6ulx-eval", "fsl,imx6ull";
+};
+
+&gpmi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi
new file mode 100644
index 000000000000..d03694feaf5c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linumiz
+ * Author: Parthiban Nallathambi <parthiban@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "MYiR MYS-6ULX Single Board Computer";
+	compatible = "fsl,imx6ull";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_vdd_5v: regulator-vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vdd_5v>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_vdd_3v3>;
+	status = "okay";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	keep-power-in-suspend;
+	vmmc-supply = <&reg_vdd_3v3>;
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index f6bb35d3ce51..1cfaf410aa43 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -147,16 +147,6 @@
 		};
 	};
 
-	tempmon: tempmon {
-		compatible = "fsl,imx7d-tempmon";
-		interrupt-parent = <&gpc>;
-		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,tempmon = <&anatop>;
-		nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
-		nvmem-cell-names = "calib", "temp_grade";
-		clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
-	};
-
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupt-parent = <&intc>;
@@ -536,7 +526,7 @@
 				};
 			};
 
-			ocotp: ocotp-ctrl@30350000 {
+			ocotp: efuse@30350000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx7d-ocotp", "syscon";
@@ -586,6 +576,16 @@
 					anatop-max-voltage = <1300000>;
 					anatop-enable-bit = <0>;
 				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx7d-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+				};
 			};
 
 			snvs: snvs@30370000 {
@@ -1126,7 +1126,7 @@
 				reg = <0x30b30200 0x200>;
 			};
 
-			usdhc1: usdhc@30b40000 {
+			usdhc1: mmc@30b40000 {
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -1138,7 +1138,7 @@
 				status = "disabled";
 			};
 
-			usdhc2: usdhc@30b50000 {
+			usdhc2: mmc@30b50000 {
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -1150,7 +1150,7 @@
 				status = "disabled";
 			};
 
-			usdhc3: usdhc@30b60000 {
+			usdhc3: mmc@30b60000 {
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index f7c4878534c8..367439639da9 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -452,7 +452,7 @@
 			reg = <0x410a3000 0x1000>;
 		};
 
-		ocotp: ocotp-ctrl@410a6000 {
+		ocotp: efuse@410a6000 {
 			compatible = "fsl,imx7ulp-ocotp", "syscon";
 			reg = <0x410a6000 0x4000>;
 			clocks = <&scg1 IMX7ULP_CLK_DUMMY>;
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 760a68c163c8..069af9a19bb6 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -59,6 +59,7 @@
 		ethernet0 = &enet0;
 		ethernet1 = &enet1;
 		ethernet2 = &enet2;
+		rtc1 = &ftm_alarm0;
 		serial0 = &lpuart0;
 		serial1 = &lpuart1;
 		serial2 = &lpuart2;
@@ -772,7 +773,7 @@
 			fsl,tmr-prsc    = <2>;
 			fsl,tmr-add     = <0xaaaaaaab>;
 			fsl,tmr-fiper1  = <999999995>;
-			fsl,tmr-fiper2  = <99990>;
+			fsl,tmr-fiper2  = <999999995>;
 			fsl,max-adj     = <499999999>;
 			fsl,extts-fifo;
 		};
@@ -1002,5 +1003,19 @@
 			big-endian;
 		};
 
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x8>;
+			#fsl,rcpm-wakeup-cells = <2>;
+		};
+
+		ftm_alarm0: timer0@29d0000 {
+			compatible = "fsl,ls1021a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			reg-names = "ftm";
+			fsl,rcpm-wakeup = <&rcpm 0x20000 0x0>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
index ce1920c052fc..64e0e9509226 100644
--- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -158,6 +158,8 @@
 	mdio1: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
 		status = "okay";
 
 		switch0: switch0@0 {
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index 778e02c000d1..de79dcfd32e6 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -164,7 +164,7 @@
 					port@9 {
 						reg = <9>;
 						label = "sff2";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff2>;
 					};
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi
index 95d0060fb56c..f8299f33a692 100644
--- a/arch/arm/boot/dts/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi
@@ -137,6 +137,8 @@
 	mdio1: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index b642520199ba..040a1f8b6130 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -186,7 +186,7 @@
 					port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_2";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff1>;
 					};
@@ -194,7 +194,7 @@
 					port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_3";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff2>;
 					};
@@ -202,7 +202,7 @@
 					port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_4";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff3>;
 					};
@@ -210,7 +210,7 @@
 					port@5 {
 						reg = <5>;
 						label = "eth_fc_1000_5";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff4>;
 					};
@@ -218,7 +218,7 @@
 					port@6 {
 						reg = <6>;
 						label = "eth_fc_1000_6";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff5>;
 					};
@@ -226,7 +226,7 @@
 					port@7 {
 						reg = <7>;
 						label = "eth_fc_1000_7";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff6>;
 					};
@@ -234,7 +234,7 @@
 					port@9 {
 						reg = <9>;
 						label = "eth_fc_1000_1";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff0>;
 					};
@@ -269,7 +269,7 @@
 					port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_8";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff7>;
 					};
@@ -277,7 +277,7 @@
 					port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_9";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff8>;
 					};
@@ -285,7 +285,7 @@
 					port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_10";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff9>;
 					};
diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts
index 55b4201e27f6..9e5187ba3fa6 100644
--- a/arch/arm/boot/dts/vf610-zii-spb4.dts
+++ b/arch/arm/boot/dts/vf610-zii-spb4.dts
@@ -119,6 +119,8 @@
 	mdio1: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
 		status = "okay";
 
 		switch0: switch0@0 {
@@ -207,6 +209,18 @@
 	};
 };
 
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+};
+
 &snvsrtc {
 	status = "disabled";
 };
@@ -324,6 +338,13 @@
 		>;
 	};
 
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
 	pinctrl_leds_debug: pinctrl-leds-debug {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
index a6c22a79779e..569614b08f04 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
@@ -81,6 +81,8 @@
 	non-removable;
 	no-1-8-v;
 	keep-power-in-suspend;
+	no-sdio;
+	no-sd;
 	status = "okay";
 };
 
@@ -88,6 +90,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
 	bus-width = <4>;
+	no-sdio;
 	status = "okay";
 };
 
@@ -105,6 +108,8 @@
 	mdio1: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
 		status = "okay";
 
 		switch0: switch0@0 {
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
index 3d05c894bdc0..b6b0f302b7b4 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
@@ -133,6 +133,8 @@
 	mdio1: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
 		status = "okay";
 
 		switch0: switch0@0 {
@@ -226,6 +228,18 @@
 	};
 };
 
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+};
+
 &snvsrtc {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 7fd39817f8ab..956182d08e74 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -10,7 +10,7 @@
 };
 
 &aips0 {
-	L2: l2-cache@40006000 {
+	L2: cache-controller@40006000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x40006000 0x1000>;
 		cache-unified;
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 2d547e7b21ad..0fe03aa0367f 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -729,6 +729,28 @@
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
+
+			crypto: crypto@400f0000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x400f0000 0x9000>;
+				ranges = <0 0x400f0000 0x9000>;
+				clocks = <&clks VF610_CLK_CAAM>;
+				clock-names = "ipg";
+
+				sec_jr0: jr0@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
 		};
 	};
 };