Merge tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver updates for 5.13-rc1.

  Actually busy this release, with a number of cleanups happening:

   - much needed core tty cleanups by Jiri Slaby

   - removal of unused and orphaned old-style serial drivers. If anyone
     shows up with this hardware, it is trivial to restore these but we
     really do not think they are in use anymore.

   - fixes and cleanups from Johan Hovold on a number of termios setting
     corner cases that loads of drivers got wrong as well as removing
     unneeded code due to tty core changes from long ago that were never
     propagated out to the drivers

   - loads of platform-specific serial port driver updates and fixes

   - coding style cleanups and other small fixes and updates all over
     the tty/serial tree.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
  serial: extend compile-test coverage
  serial: stm32: add FIFO threshold configuration
  dt-bindings: serial: 8250: update TX FIFO trigger level
  dt-bindings: serial: stm32: override FIFO threshold properties
  dt-bindings: serial: add RX and TX FIFO properties
  serial: xilinx_uartps: drop low-latency workaround
  serial: vt8500: drop low-latency workaround
  serial: timbuart: drop low-latency workaround
  serial: sunsu: drop low-latency workaround
  serial: sifive: drop low-latency workaround
  serial: txx9: drop low-latency workaround
  serial: sa1100: drop low-latency workaround
  serial: rp2: drop low-latency workaround
  serial: rda: drop low-latency workaround
  serial: owl: drop low-latency workaround
  serial: msm_serial: drop low-latency workaround
  serial: mpc52xx_uart: drop low-latency workaround
  serial: meson: drop low-latency workaround
  serial: mcf: drop low-latency workaround
  serial: lpc32xx_hs: drop low-latency workaround
  ...

3 files changed, 23 insertions, 47 deletions

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 4b8031782555..e242d7211059 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -452,32 +452,36 @@
 		usart2: serial@4000e000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x4000e000 0x400>;
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc USART2_K>;
+			wakeup-source;
 			status = "disabled";
 		};
 
 		usart3: serial@4000f000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x4000f000 0x400>;
-			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc USART3_K>;
+			wakeup-source;
 			status = "disabled";
 		};
 
 		uart4: serial@40010000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40010000 0x400>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART4_K>;
+			wakeup-source;
 			status = "disabled";
 		};
 
 		uart5: serial@40011000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40011000 0x400>;
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART5_K>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -577,16 +581,18 @@
 		uart7: serial@40018000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40018000 0x400>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART7_K>;
+			wakeup-source;
 			status = "disabled";
 		};
 
 		uart8: serial@40019000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40019000 0x400>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART8_K>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -665,8 +671,9 @@
 		usart6: serial@44003000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x44003000 0x400>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc USART6_K>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -1505,8 +1512,9 @@
 		usart1: serial@5c000000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x5c000000 0x400>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc USART1_K>;
+			wakeup-source;
 			status = "disabled";
 		};
 
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 6677ac0da45a..1fd9d1260f9e 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -595,7 +595,6 @@ CONFIG_GAMEPORT_FM801=m
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_ROCKETPORT=m
-CONFIG_CYCLADES=m
 CONFIG_SYNCLINK_GT=m
 CONFIG_NOZOMI=m
 CONFIG_N_HDLC=m
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index af81a62faba6..a3dda25a4e45 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -31,48 +31,23 @@
 #define SERIAL_MAX_NUM_LINES 1
 #define SERIAL_TIMER_VALUE (HZ / 10)
 
+static void rs_poll(struct timer_list *);
+
 static struct tty_driver *serial_driver;
 static struct tty_port serial_port;
-static struct timer_list serial_timer;
-
+static DEFINE_TIMER(serial_timer, rs_poll);
 static DEFINE_SPINLOCK(timer_lock);
 
-static char *serial_version = "0.1";
-static char *serial_name = "ISS serial driver";
-
-/*
- * This routine is called whenever a serial port is opened.  It
- * enables interrupts for a serial port, linking in its async structure into
- * the IRQ chain.   It also performs the serial-specific
- * initialization for the tty structure.
- */
-
-static void rs_poll(struct timer_list *);
-
 static int rs_open(struct tty_struct *tty, struct file * filp)
 {
-	tty->port = &serial_port;
 	spin_lock_bh(&timer_lock);
-	if (tty->count == 1) {
-		timer_setup(&serial_timer, rs_poll, 0);
+	if (tty->count == 1)
 		mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
-	}
 	spin_unlock_bh(&timer_lock);
 
 	return 0;
 }
 
-
-/*
- * ------------------------------------------------------------
- * iss_serial_close()
- *
- * This routine is called when the serial port gets closed.  First, we
- * wait for the last remaining data to be sent.  Then, we unlink its
- * async structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- * ------------------------------------------------------------
- */
 static void rs_close(struct tty_struct *tty, struct file * filp)
 {
 	spin_lock_bh(&timer_lock);
@@ -149,7 +124,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
 
 static int rs_proc_show(struct seq_file *m, void *v)
 {
-	seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
+	seq_printf(m, "serinfo:1.0 driver:0.1\n");
 	return 0;
 }
 
@@ -166,14 +141,12 @@ static const struct tty_operations serial_ops = {
 	.proc_show = rs_proc_show,
 };
 
-int __init rs_init(void)
+static int __init rs_init(void)
 {
 	tty_port_init(&serial_port);
 
 	serial_driver = alloc_tty_driver(SERIAL_MAX_NUM_LINES);
 
-	pr_info("%s %s\n", serial_name, serial_version);
-
 	/* Initialize the tty_driver structure */
 
 	serial_driver->driver_name = "iss_serial";
@@ -198,11 +171,7 @@ int __init rs_init(void)
 
 static __exit void rs_exit(void)
 {
-	int error;
-
-	if ((error = tty_unregister_driver(serial_driver)))
-		pr_err("ISS_SERIAL: failed to unregister serial driver (%d)\n",
-		       error);
+	tty_unregister_driver(serial_driver);
 	put_tty_driver(serial_driver);
 	tty_port_destroy(&serial_port);
 }