Merge commit 'v2.6.37-rc8' into perf/core

Merge reason: pick up latest -rc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 files changed, 27 insertions, 19 deletions

diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 1bec96e85196..42ff90b46dfb 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -352,3 +352,4 @@ struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys)
 	return pci_scan_bus(nr, &it8152_ops, sys);
 }
 
+EXPORT_SYMBOL(dma_set_coherent_mask);
diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
index 57f8ee154943..27ac6f550fe3 100644
--- a/arch/arm/mach-at91/include/mach/at91_mci.h
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@@ -74,6 +74,8 @@
 #define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
 #define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
 #define			AT91_MCI_TRTYP_STREAM	(2 << 19)
+#define			AT91_MCI_TRTYP_SDIO_BYTE	(4 << 19)
+#define			AT91_MCI_TRTYP_SDIO_BLOCK	(5 << 19)
 
 #define AT91_MCI_BLKR		0x18		/* Block Register */
 #define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 24498a932ba6..a54b3db80366 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -513,4 +513,4 @@ int dma_set_coherent_mask(struct device *dev, u64 mask)
 
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
-
+EXPORT_SYMBOL(dma_set_coherent_mask);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index fea833e18ad5..e0d703c7fdf7 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -63,6 +63,7 @@
 #include <linux/of_gpio.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/fs.h>
 #include <linux/watchdog.h>
 #include <linux/miscdevice.h>
 #include <linux/uaccess.h>
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
index d961949600fd..9070d7e60704 100644
--- a/arch/sh/boards/mach-se/7206/irq.c
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -140,7 +140,7 @@ void __init init_se7206_IRQ(void)
 	make_se7206_irq(IRQ1_IRQ); /* ATA */
 	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
 
-	__raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR); /* ICR1 */
+	__raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */
 
 	/* FPGA System register setup*/
 	__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
index b26264dc2aef..c509c40cba4b 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
@@ -34,7 +34,7 @@ static const int pfc_divisors[]={1,2,3,4,6,8,12};
 
 static void master_clk_init(struct clk *clk)
 {
-	return 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
+	clk->rate = 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
 }
 
 static struct clk_ops sh7201_master_clk_ops = {
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
index b601fa3978d1..6282a839e08e 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -81,8 +81,7 @@ static void shoc_clk_init(struct clk *clk)
 	for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
 		int divisor = frqcr3_divisors[i];
 
-		if (clk->ops->set_rate(clk, clk->parent->rate /
-						divisor, 0) == 0)
+		if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
 			break;
 	}
 
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index dcb65cc0a053..1a1b606d3e92 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -364,8 +364,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 
 		/* For performance reasons, reuse mc area when possible */
 		if (!mc || mc_size > curr_mc_size) {
-			if (mc)
-				vfree(mc);
+			vfree(mc);
 			mc = vmalloc(mc_size);
 			if (!mc)
 				break;
@@ -374,13 +373,11 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 
 		if (get_ucode_data(mc, ucode_ptr, mc_size) ||
 		    microcode_sanity_check(mc) < 0) {
-			vfree(mc);
 			break;
 		}
 
 		if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) {
-			if (new_mc)
-				vfree(new_mc);
+			vfree(new_mc);
 			new_rev = mc_header.rev;
 			new_mc  = mc;
 			mc = NULL;	/* trigger new vmalloc */
@@ -390,12 +387,10 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 		leftover  -= mc_size;
 	}
 
-	if (mc)
-		vfree(mc);
+	vfree(mc);
 
 	if (leftover) {
-		if (new_mc)
-			vfree(new_mc);
+		vfree(new_mc);
 		state = UCODE_ERROR;
 		goto out;
 	}
@@ -405,8 +400,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 		goto out;
 	}
 
-	if (uci->mc)
-		vfree(uci->mc);
+	vfree(uci->mc);
 	uci->mc = (struct microcode_intel *)new_mc;
 
 	pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 85268f8eadf6..a0f52af256a0 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -501,7 +501,18 @@ static inline unsigned long long get_total_mem(void)
 	return total << PAGE_SHIFT;
 }
 
-#define DEFAULT_BZIMAGE_ADDR_MAX 0x37FFFFFF
+/*
+ * Keep the crash kernel below this limit.  On 32 bits earlier kernels
+ * would limit the kernel to the low 512 MiB due to mapping restrictions.
+ * On 64 bits, kexec-tools currently limits us to 896 MiB; increase this
+ * limit once kexec-tools are fixed.
+ */
+#ifdef CONFIG_X86_32
+# define CRASH_KERNEL_ADDR_MAX	(512 << 20)
+#else
+# define CRASH_KERNEL_ADDR_MAX	(896 << 20)
+#endif
+
 static void __init reserve_crashkernel(void)
 {
 	unsigned long long total_mem;
@@ -520,10 +531,10 @@ static void __init reserve_crashkernel(void)
 		const unsigned long long alignment = 16<<20;	/* 16M */
 
 		/*
-		 *  kexec want bzImage is below DEFAULT_BZIMAGE_ADDR_MAX
+		 *  kexec want bzImage is below CRASH_KERNEL_ADDR_MAX
 		 */
 		crash_base = memblock_find_in_range(alignment,
-			       DEFAULT_BZIMAGE_ADDR_MAX, crash_size, alignment);
+			       CRASH_KERNEL_ADDR_MAX, crash_size, alignment);
 
 		if (crash_base == MEMBLOCK_ERROR) {
 			pr_info("crashkernel reservation failed - No suitable area found.\n");