Merge tag 'stm32-dt-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.9, round 1

Highlights:
----------

MCU part:
 -Enable stmpe811 on stm32f429
 -Enable l3gd20-gyro on stm32f429
 -Enable panel-ilitek-9341 on stm32f429
 -Fixes for yaml validation (leds, nodes names,
  remove useless bindings ...)
 -Add stm32xxx compatibles for syscon nodes

MPU part:
 -Add support for usb role switch to dwc2
 -Add stm32xxx compatibles for syscon nodes
 -Update uart4 pin configuration for low power mode
  used by dkx and ed1 ST boards
 -Fix uart nodes ordering and uart7_pins_a comments
 -Add the support of uart instances available on STM32MP157 boards:
  - usart3 on stm32mp157c-ev1, stm32mp157a-dk1, and stm32mp157c-dk2
  - uart7 on stm32mp157a-dk1 and stm32mp157c-dk2
  - usart2 on stm32mp157c-dk2
 -Configure I2C5 on stm32mp15 DK boards

* tag 'stm32-dt-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (38 commits)
  ARM: dts: stm32: enable usb-role-switch on USB OTG on stm32mp15xx-dkx
  ARM: dts: stm32: Add compatibles for syscon for stm32mp151
  ARM: dts: stm32: Add compatibles for syscon for stm32h743
  ARM: dts: stm32: Add compatibles for syscon for stm32f746
  ARM: dts: stm32: Add compatibles for syscon for stm32f426
  dt-bindings: arm: stm32: Add compatibles for syscon nodes
  ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrl
  ARM: dts: stm32: configure i2c5 support on stm32mp15xx-dkx
  ARM: dts: stm32: add usart2 node to stm32mp157c-dk2
  ARM: dts: stm32: add uart7 support to stm32mp15xx-dkx boards
  ARM: dts: stm32: add usart3 node to stm32mp157c-ev1
  ARM: dts: stm32: add usart3 node to stm32mp15xx-dkx boards
  ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrl
  ARM: dts: stm32: cosmetic updates in stm32mp15-pinctrl
  ARM: dts: stm32: fix uart7_pins_a comments in stm32mp15-pinctrl
  ARM: dts: stm32: fix uart nodes ordering in stm32mp15-pinctrl
  ARM: dts: stm32: Update UART4 pin states on stm32mp15xx-dkx
  ARM: dts: stm32: Update pin states for uart4 on stm32mp157c-ed1
  ARM: dts: stm32: update uart4 pin configuration for low power on stm32mp157
  dt-bindings: usb: dwc2: Fix issues for stm32mp15x SoC
  ...

Link: https://lore.kernel.org/r/8a9bb27b-fc08-126a-11f7-01354e8577e1@st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

17 files changed, 496 insertions, 94 deletions

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index c27fa355e5ab..67e7648de41e 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -104,17 +104,17 @@
 
 	leds {
 		compatible = "gpio-leds";
-		green {
+		led-green {
 			gpios = <&gpiog 6 1>;
 			linux,default-trigger = "heartbeat";
 		};
-		orange {
+		led-orange {
 			gpios = <&gpiog 7 1>;
 		};
-		red {
+		led-red {
 			gpios = <&gpiog 10 1>;
 		};
-		blue {
+		led-blue {
 			gpios = <&gpiog 12 1>;
 		};
 	};
@@ -240,7 +240,7 @@
 
 &ltdc {
 	status = "okay";
-	pinctrl-0 = <&ltdc_pins>;
+	pinctrl-0 = <&ltdc_pins_a>;
 	pinctrl-names = "default";
 
 	port {
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index 4ea3f98dd275..ca8c192449ee 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -66,17 +66,17 @@
 
 	leds {
 		compatible = "gpio-leds";
-		green {
+		led-green {
 			gpios = <&gpiof 10 1>;
 			linux,default-trigger = "heartbeat";
 		};
-		orange {
+		led-orange {
 			gpios = <&stmfx_pinctrl 17 1>;
 		};
-		red {
+		led-red {
 			gpios = <&gpiob 7 1>;
 		};
-		blue {
+		led-blue {
 			gpios = <&stmfx_pinctrl 19 1>;
 		};
 	};
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 392fa143ce07..4774163af54b 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -257,7 +257,7 @@
 				};
 			};
 
-			pwm1_pins: pwm-1 {
+			pwm1_pins: pwm1-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
 						 <STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */
@@ -265,7 +265,7 @@
 				};
 			};
 
-			pwm3_pins: pwm-3 {
+			pwm3_pins: pwm3-0 {
 				pins {
 					pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */
 						 <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
@@ -282,7 +282,7 @@
 				};
 			};
 
-			ltdc_pins: ltdc-0 {
+			ltdc_pins_a: ltdc-0 {
 				pins {
 					pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
 						 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
@@ -316,6 +316,85 @@
 				};
 			};
 
+			ltdc_pins_b: ltdc-1 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 6,  AF14)>,
+						/* LCD_HSYNC */
+						 <STM32_PINMUX('A', 4,  AF14)>,
+						 /* LCD_VSYNC */
+						 <STM32_PINMUX('G', 7,  AF14)>,
+						 /* LCD_CLK */
+						 <STM32_PINMUX('C', 10, AF14)>,
+						 /* LCD_R2 */
+						 <STM32_PINMUX('B', 0,  AF9)>,
+						 /* LCD_R3 */
+						 <STM32_PINMUX('A', 11, AF14)>,
+						 /* LCD_R4 */
+						 <STM32_PINMUX('A', 12, AF14)>,
+						 /* LCD_R5 */
+						 <STM32_PINMUX('B', 1,  AF9)>,
+						 /* LCD_R6*/
+						 <STM32_PINMUX('G', 6,  AF14)>,
+						 /* LCD_R7 */
+						 <STM32_PINMUX('A', 6,  AF14)>,
+						 /* LCD_G2 */
+						 <STM32_PINMUX('G', 10, AF9)>,
+						 /* LCD_G3 */
+						 <STM32_PINMUX('B', 10, AF14)>,
+						 /* LCD_G4 */
+						 <STM32_PINMUX('D', 6,  AF14)>,
+						 /* LCD_B2 */
+						 <STM32_PINMUX('G', 11, AF14)>,
+						 /* LCD_B3*/
+						 <STM32_PINMUX('B', 11, AF14)>,
+						 /* LCD_G5 */
+						 <STM32_PINMUX('C', 7,  AF14)>,
+						 /* LCD_G6 */
+						 <STM32_PINMUX('D', 3,  AF14)>,
+						 /* LCD_G7 */
+						 <STM32_PINMUX('G', 12, AF9)>,
+						 /* LCD_B4 */
+						 <STM32_PINMUX('A', 3,  AF14)>,
+						 /* LCD_B5 */
+						 <STM32_PINMUX('B', 8,  AF14)>,
+						 /* LCD_B6 */
+						 <STM32_PINMUX('B', 9,  AF14)>,
+						 /* LCD_B7 */
+						 <STM32_PINMUX('F', 10, AF14)>;
+						 /* LCD_DE */
+					slew-rate = <2>;
+				};
+			};
+
+			spi5_pins: spi5-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('F', 7, AF5)>,
+						/* SPI5_CLK */
+						 <STM32_PINMUX('F', 9, AF5)>;
+						/* SPI5_MOSI */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('F', 8, AF5)>;
+						/* SPI5_MISO */
+					bias-disable;
+				};
+			};
+
+			i2c3_pins: i2c3-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 9, AF4)>,
+						/* I2C3_SDA */
+						 <STM32_PINMUX('A', 8, AF4)>;
+						/* I2C3_SCL */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <3>;
+				};
+			};
+
 			dcmi_pins: dcmi-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 30c0f6717871..3dc068b91ca1 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -49,6 +49,8 @@
 #include "stm32f429.dtsi"
 #include "stm32f429-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "STMicroelectronics STM32F429i-DISCO board";
@@ -70,10 +72,10 @@
 
 	leds {
 		compatible = "gpio-leds";
-		red {
+		led-red {
 			gpios = <&gpiog 14 0>;
 		};
-		green {
+		led-green {
 			gpios = <&gpiog 13 0>;
 			linux,default-trigger = "heartbeat";
 		};
@@ -108,12 +110,103 @@
 	status = "okay";
 };
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpioa>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			/* forbid to use ADC channels 3-0 (touch) */
+			st,norequest-mask = <0x0F>;
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+	pinctrl-0 = <&ltdc_pins_b>;
+	pinctrl-names = "default";
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
 &rtc {
 	assigned-clocks = <&rcc 1 CLK_RTC>;
 	assigned-clock-parents = <&rcc 1 CLK_LSI>;
 	status = "okay";
 };
 
+&spi5 {
+	status = "okay";
+	pinctrl-0 = <&spi5_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpioc 1 GPIO_ACTIVE_LOW>, <&gpioc 2 GPIO_ACTIVE_LOW>;
+
+	l3gd20: l3gd20@0 {
+		compatible = "st,l3gd20-gyro";
+		spi-max-frequency = <10000000>;
+		st,drdy-int-pin = <2>;
+		interrupt-parent = <&gpioa>;
+		interrupts = <1 IRQ_TYPE_EDGE_RISING>,
+				<2 IRQ_TYPE_EDGE_RISING>;
+		reg = <0>;
+		status = "okay";
+	};
+
+	display: display@1{
+		/* Connect panel-ilitek-9341 to ltdc */
+		compatible = "st,sf-tc240t-9370-t";
+		reg = <1>;
+		spi-3wire;
+		spi-max-frequency = <10000000>;
+		dc-gpios = <&gpiod 13 0>;
+		port {
+			panel_in_rgb: endpoint {
+			remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 393f43c85a3c..ad715a0e1c9a 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -322,7 +322,6 @@
 			assigned-clock-parents = <&rcc 1 CLK_LSE>;
 			interrupt-parent = <&exti>;
 			interrupts = <17 1>;
-			interrupt-names = "alarm";
 			st,syscfg = <&pwrcfg 0x00 0x100>;
 			status = "disabled";
 		};
@@ -402,6 +401,18 @@
 			status = "disabled";
 		};
 
+		i2c3: i2c@40005c00 {
+			compatible = "st,stm32f4-i2c";
+			reg = <0x40005c00 0x400>;
+			interrupts = <72>,
+				     <73>;
+			resets = <&rcc STM32F4_APB1_RESET(I2C3)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C3)>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		dac: dac@40007400 {
 			compatible = "st,stm32f4-dac-core";
 			reg = <0x40007400 0x400>;
@@ -586,8 +597,8 @@
 			status = "disabled";
 		};
 
-		syscfg: system-config@40013800 {
-			compatible = "syscon";
+		syscfg: syscon@40013800 {
+			compatible = "st,stm32-syscfg", "syscon";
 			reg = <0x40013800 0x400>;
 		};
 
@@ -660,6 +671,9 @@
 			reg = <0x40015000 0x400>;
 			interrupts = <85>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>;
+			dmas = <&dma2 3 2 0x400 0x0>,
+				<&dma2 4 2 0x400 0x0>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -674,7 +688,7 @@
 		};
 
 		pwrcfg: power-config@40007000 {
-			compatible = "syscon";
+			compatible = "st,stm32-power-config", "syscon";
 			reg = <0x40007000 0x400>;
 		};
 
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 9397db0c43de..2e1b3bbbe4b5 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -89,17 +89,17 @@
 
 	leds {
 		compatible = "gpio-leds";
-		green {
+		led-green {
 			gpios = <&gpiog 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
-		orange {
+		led-orange {
 			gpios = <&gpiod 4 GPIO_ACTIVE_LOW>;
 		};
-		red {
+		led-red {
 			gpios = <&gpiod 5 GPIO_ACTIVE_LOW>;
 		};
-		blue {
+		led-blue {
 			gpios = <&gpiok 3 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 93c063796780..640ff54ed00c 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -304,7 +304,6 @@
 			assigned-clock-parents = <&rcc 1 CLK_LSE>;
 			interrupt-parent = <&exti>;
 			interrupts = <17 1>;
-			interrupt-names = "alarm";
 			st,syscfg = <&pwrcfg 0x00 0x100>;
 			status = "disabled";
 		};
@@ -496,8 +495,8 @@
 			status = "disabled";
 		};
 
-		syscfg: system-config@40013800 {
-			compatible = "syscon";
+		syscfg: syscon@40013800 {
+			compatible = "st,stm32-syscfg", "syscon";
 			reg = <0x40013800 0x400>;
 		};
 
@@ -564,7 +563,7 @@
 		};
 
 		pwrcfg: power-config@40007000 {
-			compatible = "syscon";
+			compatible = "st,stm32-power-config", "syscon";
 			reg = <0x40007000 0x400>;
 		};
 
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 1626e00bb2cb..0ce7fbc20fa4 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -66,11 +66,11 @@
 
 	leds {
 		compatible = "gpio-leds";
-		green {
+		led-green {
 			gpios = <&gpioj 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
-		red {
+		led-red {
 			gpios = <&gpioj 13 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
index e44e7baa3f17..fa5dcb6a5fdd 100644
--- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
@@ -163,7 +163,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			i2c1_pins_a: i2c1@0 {
+			i2c1_pins_a: i2c1-0 {
 				pins {
 					pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
 						 <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
@@ -173,7 +173,7 @@
 				};
 			};
 
-			ethernet_rmii: rmii@0 {
+			ethernet_rmii: rmii-0 {
 				pins {
 					pinmux = <STM32_PINMUX('G', 11, AF11)>,
 						 <STM32_PINMUX('G', 13, AF11)>,
@@ -256,7 +256,7 @@
 				};
 			};
 
-			usart1_pins: usart1@0 {
+			usart1_pins: usart1-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
 					bias-disable;
@@ -269,7 +269,7 @@
 				};
 			};
 
-			usart2_pins: usart2@0 {
+			usart2_pins: usart2-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
 					bias-disable;
@@ -282,7 +282,7 @@
 				};
 			};
 
-			usbotg_hs_pins_a: usbotg-hs@0 {
+			usbotg_hs_pins_a: usbotg-hs-0 {
 				pins {
 					pinmux = <STM32_PINMUX('H', 4, AF10)>,	/* ULPI_NXT */
 							 <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 9b7fc68380e9..69e2f1e78ed6 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -361,8 +361,8 @@
 			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <62>, <76>;
 		};
 
-		syscfg: system-config@58000400 {
-			compatible = "syscon";
+		syscfg: syscon@58000400 {
+			compatible = "st,stm32-syscfg", "syscon";
 			reg = <0x58000400 0x400>;
 		};
 
@@ -487,7 +487,6 @@
 			assigned-clock-parents = <&rcc LSE_CK>;
 			interrupt-parent = <&exti>;
 			interrupts = <17 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "alarm";
 			st,syscfg = <&pwrcfg 0x00 0x100>;
 			status = "disabled";
 		};
@@ -502,7 +501,7 @@
 		};
 
 		pwrcfg: power-config@58024800 {
-			compatible = "syscon";
+			compatible = "st,stm32-power-config", "syscon";
 			reg = <0x58024800 0x400>;
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 7eb858732d6d..b5a66429670c 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -210,8 +210,8 @@
 				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
 				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
 				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
-			         <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
-			         <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
 				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
 				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
 				 <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
@@ -453,7 +453,7 @@
 	i2c5_pins_b: i2c5-1 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 0, AF4)>, /* I2C5_SCL */
-			         <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
+				 <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
 			bias-disable;
 			drive-open-drain;
 			slew-rate = <0>;
@@ -463,7 +463,7 @@
 	i2c5_sleep_pins_b: i2c5-sleep-1 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 0, ANALOG)>, /* I2C5_SCL */
-			         <STM32_PINMUX('D', 1, ANALOG)>; /* I2C5_SDA */
+				 <STM32_PINMUX('D', 1, ANALOG)>; /* I2C5_SDA */
 		};
 	};
 
@@ -1072,7 +1072,6 @@
 		};
 	};
 
-
 	sai2a_pins_b: sai2a-1 {
 		pins1 {
 			pinmux = <STM32_PINMUX('I', 6, AF10)>,	/* SAI2_SD_A */
@@ -1574,6 +1573,147 @@
 		};
 	};
 
+	uart4_pins_a: uart4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_idle_pins_a: uart4-idle-0 {
+		   pins1 {
+			 pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+		   };
+		   pins2 {
+			 pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			 bias-disable;
+		   };
+	};
+
+	uart4_sleep_pins_a: uart4-sleep-0 {
+		   pins {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+		    };
+	};
+
+	uart4_pins_b: uart4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_pins_c: uart4-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART7_RX */
+				 <STM32_PINMUX('E', 10, AF7)>, /* UART7_CTS */
+				 <STM32_PINMUX('E', 9, AF7)>; /* UART7_RTS */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_b: uart7-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_c: uart7-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_idle_pins_c: uart7-idle-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>; /* UART7_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_sleep_pins_c: uart7-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* UART7_TX */
+				 <STM32_PINMUX('E', 7, ANALOG)>; /* UART7_RX */
+		};
+	};
+
+	uart8_pins_a: uart8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */
+			bias-disable;
+		};
+	};
+
+	spi4_pins_a: spi4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
+				 <STM32_PINMUX('E', 6, AF5)>;  /* SPI4_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
+			bias-disable;
+		};
+	};
+
 	usart2_pins_a: usart2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
@@ -1622,99 +1762,127 @@
 		};
 	};
 
-	usart3_pins_a: usart3-0 {
+	usart2_pins_c: usart2-2 {
 		pins1 {
-			pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
+			pinmux = <STM32_PINMUX('D', 5, AF7)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
 			bias-disable;
 			drive-push-pull;
-			slew-rate = <0>;
+			slew-rate = <3>;
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
 			bias-disable;
 		};
 	};
 
-	uart4_pins_a: uart4-0 {
+	usart2_idle_pins_c: usart2-idle-2 {
 		pins1 {
-			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
+			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
 			bias-disable;
 		};
 	};
 
-	uart4_pins_b: uart4-1 {
+	usart2_sleep_pins_c: usart2-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+
+	usart3_pins_a: usart3-0 {
 		pins1 {
-			pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+			pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
 			bias-disable;
 			drive-push-pull;
 			slew-rate = <0>;
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
 			bias-disable;
 		};
 	};
 
-	uart4_pins_c: uart4-2 {
+	usart3_pins_b: usart3-1 {
 		pins1 {
-			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
 			bias-disable;
 			drive-push-pull;
 			slew-rate = <0>;
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+				 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
 			bias-disable;
 		};
 	};
 
-	uart7_pins_a: uart7-0 {
+	usart3_idle_pins_b: usart3-idle-1 {
 		pins1 {
-			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
-				 <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
-				 <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
 			bias-disable;
 		};
 	};
 
-	uart7_pins_b: uart7-1 {
+	usart3_sleep_pins_b: usart3-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+		};
+	};
+
+	usart3_pins_c: usart3-2 {
 		pins1 {
-			pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
 			bias-disable;
 			drive-push-pull;
 			slew-rate = <0>;
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
+			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+				 <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
 			bias-disable;
 		};
 	};
 
-	uart8_pins_a: uart8-0 {
+	usart3_idle_pins_c: usart3-idle-2 {
 		pins1 {
-			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
 			bias-disable;
 		};
 	};
 
+	usart3_sleep_pins_c: usart3-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('B', 13, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+		};
+	};
+
 	usbotg_hs_pins_a: usbotg-hs-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
@@ -1776,18 +1944,4 @@
 			bias-disable;
 		};
 	};
-
-	spi4_pins_a: spi4-0 {
-		pins {
-			pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
-				 <STM32_PINMUX('E', 6, AF5)>;  /* SPI4_MOSI */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
-			bias-disable;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 36f38a95b4de..bfe29023fbd5 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1127,7 +1127,7 @@
 		};
 
 		pwr_mcu: pwr_mcu@50001014 {
-			compatible = "syscon";
+			compatible = "st,stm32mp151-pwr-mcu", "syscon";
 			reg = <0x50001014 0x4>;
 		};
 
@@ -1331,6 +1331,8 @@
 			dma-names = "tx", "rx";
 			clocks = <&rcc QSPI_K>;
 			resets = <&rcc QSPI_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index d03d4cd2606a..4c8be9c8eb20 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -18,6 +18,8 @@
 	aliases {
 		ethernet0 = &ethernet0;
 		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart7;
 	};
 
 	chosen {
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
index 9a8a26710ac1..045636555ddd 100644
--- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -19,6 +19,9 @@
 	aliases {
 		ethernet0 = &ethernet0;
 		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart7;
+		serial3 = &usart2;
 	};
 
 	chosen {
@@ -84,3 +87,11 @@
 		};
 	};
 };
+
+&usart2 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_c>;
+	pinctrl-1 = <&usart2_sleep_pins_c>;
+	pinctrl-2 = <&usart2_idle_pins_c>;
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 32ccd50b4144..ca109dc18238 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -353,8 +353,10 @@
 };
 
 &uart4 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep", "idle";
 	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index b19056557ef0..85628e16d2d5 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -19,6 +19,7 @@
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &usart3;
 		ethernet0 = &ethernet0;
 	};
 
@@ -341,6 +342,20 @@
 	};
 };
 
+&usart3 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart3_pins_b>;
+	pinctrl-1 = <&usart3_sleep_pins_b>;
+	pinctrl-2 = <&usart3_idle_pins_b>;
+	/*
+	 * HW flow control USART3_RTS is optional, and isn't default wired to
+	 * the connector. SB23 needs to be soldered in order to use it, and R77
+	 * (ETH_CLK) should be removed.
+	 */
+	uart-has-rtscts;
+	status = "disabled";
+};
+
 &usbh_ehci {
 	phys = <&usbphyc_port0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 70db923a45f7..a5307745719a 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -62,7 +62,7 @@
 
 	led {
 		compatible = "gpio-leds";
-		blue {
+		led-blue {
 			label = "heartbeat";
 			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -365,6 +365,19 @@
 	};
 };
 
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+};
+
 &i2s2 {
 	clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
 	clock-names = "pclk", "i2sclk", "x8k", "x11k";
@@ -584,20 +597,39 @@
 };
 
 &uart4 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep", "idle";
 	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
 	status = "okay";
 };
 
+&uart7 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart7_pins_c>;
+	pinctrl-1 = <&uart7_sleep_pins_c>;
+	pinctrl-2 = <&uart7_idle_pins_c>;
+	status = "disabled";
+};
+
+&usart3 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart3_pins_c>;
+	pinctrl-1 = <&usart3_sleep_pins_c>;
+	pinctrl-2 = <&usart3_idle_pins_c>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
 &usbh_ehci {
 	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbotg_hs {
-	dr_mode = "peripheral";
 	phys = <&usbphyc_port1 0>;
 	phy-names = "usb2-phy";
+	usb-role-switch;
 	status = "okay";
 };