summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-01-09 14:39:59 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-01-09 14:39:59 -0800
commitb3c37522928b5452588fc202eaa0f11f6e339256 (patch)
tree37bfe21d9977b15271903d1a4b304289a232e364 /arch
parent2ac9d7aaccbd598b5bd19ac40761b723bb675442 (diff)
parent6d0a5636fba5a3f82ec80ab124dd4748344549c3 (diff)
downloadlinux-b3c37522928b5452588fc202eaa0f11f6e339256.tar.bz2
Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
power management changes for omap and imx A significant part of the changes for these two platforms went into power management, so they are split out into a separate branch. * tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits) ARM: imx6: remove __CPUINIT annotation from v7_invalidate_l1 ARM: imx6: fix v7_invalidate_l1 by adding I-Cache invalidation ARM: imx6q: resume PL310 only when CACHE_L2X0 defined ARM: imx6q: build pm code only when CONFIG_PM selected ARM: mx5: use generic irq chip pm interface for pm functions on ARM: omap: pass minimal SoC/board data for UART from dt arm/dts: Add minimal device tree support for omap2420 and omap2430 omap-serial: Add minimal device tree support omap-serial: Use default clock speed (48Mhz) if not specified omap-serial: Get rid of all pdev->id usage ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init ARM: OMAP4: PRM: use PRCM interrupt handler ARM: OMAP3: pm: use prcm chain handler ARM: OMAP: hwmod: add support for selecting mpu_irq for each wakeup pad ARM: OMAP2+: mux: add support for PAD wakeup interrupts ARM: OMAP: PRCM: add suspend prepare / finish support ARM: OMAP: PRCM: add support for chain interrupt handler ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic list ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/omap2.dtsi67
-rw-r--r--arch/arm/boot/dts/omap3.dtsi31
-rw-r--r--arch/arm/boot/dts/omap4.dtsi28
-rw-r--r--arch/arm/mach-imx/Kconfig1
-rw-r--r--arch/arm/mach-imx/Makefile6
-rw-r--r--arch/arm/mach-imx/head-v7.S17
-rw-r--r--arch/arm/mach-imx/pm-imx6q.c2
-rw-r--r--arch/arm/mach-mx5/mm.c19
-rw-r--r--arch/arm/mach-mx5/system.c3
-rw-r--r--arch/arm/mach-omap2/Kconfig21
-rw-r--r--arch/arm/mach-omap2/Makefile19
-rw-r--r--arch/arm/mach-omap2/board-3430sdp.c100
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c68
-rw-r--r--arch/arm/mach-omap2/board-generic.c1
-rw-r--r--arch/arm/mach-omap2/board-n8x0.c6
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c68
-rw-r--r--arch/arm/mach-omap2/common.h64
-rw-r--r--arch/arm/mach-omap2/cpuidle34xx.c21
-rw-r--r--arch/arm/mach-omap2/cpuidle44xx.c245
-rw-r--r--arch/arm/mach-omap2/include/mach/barriers.h31
-rw-r--r--arch/arm/mach-omap2/include/mach/omap-secure.h57
-rw-r--r--arch/arm/mach-omap2/include/mach/omap-wakeupgen.h39
-rw-r--r--arch/arm/mach-omap2/io.c9
-rw-r--r--arch/arm/mach-omap2/mux.c89
-rw-r--r--arch/arm/mach-omap2/omap-headsmp.S5
-rw-r--r--arch/arm/mach-omap2/omap-hotplug.c14
-rw-r--r--arch/arm/mach-omap2/omap-mpuss-lowpower.c398
-rw-r--r--arch/arm/mach-omap2/omap-secure.c81
-rw-r--r--arch/arm/mach-omap2/omap-smc.S (renamed from arch/arm/mach-omap2/omap44xx-smc.S)23
-rw-r--r--arch/arm/mach-omap2/omap-smp.c45
-rw-r--r--arch/arm/mach-omap2/omap-wakeupgen.c389
-rw-r--r--arch/arm/mach-omap2/omap4-common.c94
-rw-r--r--arch/arm/mach-omap2/omap4-sar-layout.h50
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c125
-rw-r--r--arch/arm/mach-omap2/pm.h1
-rw-r--r--arch/arm/mach-omap2/pm24xx.c20
-rw-r--r--arch/arm/mach-omap2/pm34xx.c158
-rw-r--r--arch/arm/mach-omap2/pm44xx.c153
-rw-r--r--arch/arm/mach-omap2/prcm-common.h75
-rw-r--r--arch/arm/mach-omap2/prm2xxx_3xxx.c97
-rw-r--r--arch/arm/mach-omap2/prm2xxx_3xxx.h9
-rw-r--r--arch/arm/mach-omap2/prm44xx.c116
-rw-r--r--arch/arm/mach-omap2/prm44xx.h8
-rw-r--r--arch/arm/mach-omap2/prm_common.c320
-rw-r--r--arch/arm/mach-omap2/serial.c907
-rw-r--r--arch/arm/mach-omap2/sleep44xx.S379
-rw-r--r--arch/arm/plat-mxc/include/mach/common.h8
-rw-r--r--arch/arm/plat-mxc/include/mach/mxc.h2
-rw-r--r--arch/arm/plat-mxc/tzic.c40
-rw-r--r--arch/arm/plat-omap/common.c3
-rw-r--r--arch/arm/plat-omap/include/plat/omap-secure.h13
-rw-r--r--arch/arm/plat-omap/include/plat/omap-serial.h37
-rw-r--r--arch/arm/plat-omap/include/plat/omap44xx.h1
-rw-r--r--arch/arm/plat-omap/include/plat/omap_hwmod.h6
-rw-r--r--arch/arm/plat-omap/include/plat/serial.h10
-rw-r--r--arch/arm/plat-omap/include/plat/sram.h6
-rw-r--r--arch/arm/plat-omap/sram.c8
57 files changed, 3494 insertions, 1119 deletions
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
new file mode 100644
index 000000000000..f2ab4ea7cc0e
--- /dev/null
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -0,0 +1,67 @@
+/*
+ * Device Tree Source for OMAP2 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
+
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm1136jf-s";
+ };
+ };
+
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap2-mpu";
+ ti,hwmods = "mpu";
+ };
+ };
+
+ ocp {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main";
+
+ intc: interrupt-controller@1 {
+ compatible = "ti,omap2-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ uart1: serial@4806a000 {
+ compatible = "ti,omap2-uart";
+ ti,hwmods = "uart1";
+ clock-frequency = <48000000>;
+ };
+
+ uart2: serial@4806c000 {
+ compatible = "ti,omap2-uart";
+ ti,hwmods = "uart2";
+ clock-frequency = <48000000>;
+ };
+
+ uart3: serial@4806e000 {
+ compatible = "ti,omap2-uart";
+ ti,hwmods = "uart3";
+ clock-frequency = <48000000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index d202bb5ec7ef..216c3317461d 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -13,6 +13,13 @@
/ {
compatible = "ti,omap3430", "ti,omap3";
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ };
+
cpus {
cpu@0 {
compatible = "arm,cortex-a8";
@@ -59,5 +66,29 @@
interrupt-controller;
#interrupt-cells = <1>;
};
+
+ uart1: serial@0x4806a000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart1";
+ clock-frequency = <48000000>;
+ };
+
+ uart2: serial@0x4806c000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart2";
+ clock-frequency = <48000000>;
+ };
+
+ uart3: serial@0x49020000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart3";
+ clock-frequency = <48000000>;
+ };
+
+ uart4: serial@0x49042000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart4";
+ clock-frequency = <48000000>;
+ };
};
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 4c61c829043a..e8fe75fac7c5 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -21,6 +21,10 @@
interrupt-parent = <&gic>;
aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
};
cpus {
@@ -99,5 +103,29 @@
reg = <0x48241000 0x1000>,
<0x48240100 0x0100>;
};
+
+ uart1: serial@0x4806a000 {
+ compatible = "ti,omap4-uart";
+ ti,hwmods = "uart1";
+ clock-frequency = <48000000>;
+ };
+
+ uart2: serial@0x4806c000 {
+ compatible = "ti,omap4-uart";
+ ti,hwmods = "uart2";
+ clock-frequency = <48000000>;
+ };
+
+ uart3: serial@0x48020000 {
+ compatible = "ti,omap4-uart";
+ ti,hwmods = "uart3";
+ clock-frequency = <48000000>;
+ };
+
+ uart4: serial@0x4806e000 {
+ compatible = "ti,omap4-uart";
+ ti,hwmods = "uart4";
+ clock-frequency = <48000000>;
+ };
};
};
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 9d8598f29fda..0e6de366c648 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -596,6 +596,7 @@ comment "i.MX6 family:"
config SOC_IMX6Q
bool "i.MX6 Quad support"
+ select ARM_CPU_SUSPEND if PM
select ARM_GIC
select CPU_V7
select HAVE_ARM_SCU
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index d97f409ce98b..f5920c24f7d7 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -70,4 +70,8 @@ AFLAGS_head-v7.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
-obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
+
+ifeq ($(CONFIG_PM),y)
+obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
+endif
diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/head-v7.S
index 6229efbc70cb..7e49deb128a4 100644
--- a/arch/arm/mach-imx/head-v7.S
+++ b/arch/arm/mach-imx/head-v7.S
@@ -16,7 +16,6 @@
#include <asm/hardware/cache-l2x0.h>
.section ".text.head", "ax"
- __CPUINIT
/*
* The secondary kernel init calls v7_flush_dcache_all before it enables
@@ -33,6 +32,7 @@
*/
ENTRY(v7_invalidate_l1)
mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 2, r0, c0, c0, 0
mrc p15, 1, r0, c0, c0, 0
@@ -71,6 +71,7 @@ ENTRY(v7_secondary_startup)
ENDPROC(v7_secondary_startup)
#endif
+#ifdef CONFIG_PM
/*
* The following code is located into the .data section. This is to
* allow phys_l2x0_saved_regs to be accessed with a relative load
@@ -79,6 +80,7 @@ ENDPROC(v7_secondary_startup)
.data
.align
+#ifdef CONFIG_CACHE_L2X0
.macro pl310_resume
ldr r2, phys_l2x0_saved_regs
ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
@@ -88,12 +90,17 @@ ENDPROC(v7_secondary_startup)
str r1, [r0, #L2X0_CTRL] @ re-enable L2
.endm
+ .globl phys_l2x0_saved_regs
+phys_l2x0_saved_regs:
+ .long 0
+#else
+ .macro pl310_resume
+ .endm
+#endif
+
ENTRY(v7_cpu_resume)
bl v7_invalidate_l1
pl310_resume
b cpu_resume
ENDPROC(v7_cpu_resume)
-
- .globl phys_l2x0_saved_regs
-phys_l2x0_saved_regs:
- .long 0
+#endif
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index f20f191d7cca..f7b0c2b1b905 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -64,7 +64,9 @@ void __init imx6q_pm_init(void)
* address of the data structure used by l2x0 core to save registers,
* and later restore the necessary ones in imx6q resume entry.
*/
+#ifdef CONFIG_CACHE_L2X0
phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
+#endif
suspend_set_ops(&imx6q_pm_ops);
}
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index df4a508f240a..bc17dfea3817 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -13,6 +13,7 @@
#include <linux/mm.h>
#include <linux/init.h>
+#include <linux/clk.h>
#include <asm/mach/map.h>
@@ -21,10 +22,26 @@
#include <mach/devices-common.h>
#include <mach/iomux-v3.h>
+static struct clk *gpc_dvfs_clk;
+
static void imx5_idle(void)
{
- if (!need_resched())
+ if (!need_resched()) {
+ /* gpc clock is needed for SRPG */
+ if (gpc_dvfs_clk == NULL) {
+ gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+ if (IS_ERR(gpc_dvfs_clk))
+ goto err0;
+ }
+ clk_enable(gpc_dvfs_clk);
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ if (tzic_enable_wake())
+ goto err1;
+ cpu_do_idle();
+err1:
+ clk_disable(gpc_dvfs_clk);
+ }
+err0:
local_irq_enable();
}
diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c
index 144ebebc4a61..5eebfaad1226 100644
--- a/arch/arm/mach-mx5/system.c
+++ b/arch/arm/mach-mx5/system.c
@@ -55,9 +55,6 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
stop_mode = 1;
}
arm_srpgcr |= MXC_SRPGCR_PCR;
-
- if (tzic_enable_wake(1) != 0)
- return;
break;
case STOP_POWER_ON:
ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index b7407154c881..904bd1dfcd2e 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -365,6 +365,27 @@ config OMAP3_SDRC_AC_TIMING
wish to say no. Selecting yes without understanding what is
going on could result in system crashes;
+config OMAP4_ERRATA_I688
+ bool "OMAP4 errata: Async Bridge Corruption"
+ depends on ARCH_OMAP4
+ select ARCH_HAS_BARRIERS
+ help
+ If a data is stalled inside asynchronous bridge because of back
+ pressure, it may be accepted multiple times, creating pointer
+ misalignment that will corrupt next transfers on that data path
+ until next reset of the system (No recovery procedure once the
+ issue is hit, the path remains consistently broken). Async bridge
+ can be found on path between MPU to EMIF and MPU to L3 interconnect.
+ This situation can happen only when the idle is initiated by a
+ Master Request Disconnection (which is trigged by software when
+ executing WFI on CPU).
+ The work-around for this errata needs all the initiators connected
+ through async bridge must ensure that data path is properly drained
+ before issuing WFI. This condition will be met if one Strongly ordered
+ access is performed to the target right before executing the WFI.
+ In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
+ IO barrier ensure that there is no synchronisation loss on initiators
+ operating on both interconnect port simultaneously.
endmenu
endif
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 6d226a76d057..fc9b238cbc19 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -11,10 +11,11 @@ hwmod-common = omap_hwmod.o \
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
clkt_dpll.o clkt_clksel.o
+secure-common = omap-smc.o omap-secure.o
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
@@ -24,11 +25,13 @@ obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
-obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o omap4-common.o
+obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o \
+ sleep44xx.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
-AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a$(plus_sec)
+AFLAGS_omap-smc.o :=-Wa,-march=armv7-a$(plus_sec)
+AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec)
# Functions loaded to SRAM
obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
@@ -62,7 +65,8 @@ obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o \
cpuidle34xx.o
-obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o \
+ cpuidle44xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
@@ -77,6 +81,7 @@ endif
endif
# PRCM
+obj-y += prm_common.o
obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
vc3xxx_data.o vp3xxx_data.o
@@ -86,7 +91,7 @@ obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
cm44xx.o prcm_mpu44xx.o \
prminst44xx.o vc44xx_data.o \
- vp44xx_data.o
+ vp44xx_data.o prm44xx.o
# OMAP voltage domains
voltagedomain-common := voltage.o vc.o vp.o
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 9996334cb687..383717ba63b9 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -475,106 +475,8 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
-
-static struct omap_device_pad serial1_pads[] __initdata = {
- /*
- * Note that off output enable is an active low
- * signal. So setting this means pin is a
- * input enabled in off mode
- */
- OMAP_MUX_STATIC("uart1_cts.uart1_cts",
- OMAP_PIN_INPUT |
- OMAP_PIN_OFF_INPUT_PULLDOWN |
- OMAP_OFFOUT_EN |
- OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart1_rts.uart1_rts",
- OMAP_PIN_OUTPUT |
- OMAP_OFF_EN |
- OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart1_rx.uart1_rx",
- OMAP_PIN_INPUT |
- OMAP_PIN_OFF_INPUT_PULLDOWN |
- OMAP_OFFOUT_EN |
- OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart1_tx.uart1_tx",
- OMAP_PIN_OUTPUT |
- OMAP_OFF_EN |
- OMAP_MUX_MODE0),
-};
-
-static struct omap_device_pad serial2_pads[] __initdata = {
- OMAP_MUX_STATIC("uart2_cts.uart2_cts",
- OMAP_PIN_INPUT_PULLUP |
- OMAP_PIN_OFF_INPUT_PULLDOWN |
- OMAP_OFFOUT_EN |
- OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart2_rts.uart2_rts",
- OMAP_PIN_OUTPUT |
- OMAP_OFF_EN |
- OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart2_rx.uart2_rx",
- OMAP_PIN_INPUT |
- OMAP_PIN_OFF_INPUT_PULLDOWN |
- OMAP_OFFOUT_EN |
- OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart2_tx.uart2_tx",
- OMAP_PIN_OUTPUT |
- OMAP_OFF_EN |
- OMAP_MUX_MODE0),
-};
-
-static struct omap_device_pad serial3_pads[] __initdata = {
- OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
- OMAP_PIN_INPUT_PULLDOWN |
- OMAP_PIN_OFF_INPUT_PULLDOWN |
- OMAP_OFFOUT_EN |
- OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
- OMAP_PIN_OUTPUT |
- OMAP_OFF_EN |
- OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
- OMAP_PIN_INPUT |
- OMAP_PIN_OFF_INPUT_PULLDOWN |
- OMAP_OFFOUT_EN |
- OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
- OMAP_PIN_OUTPUT |
- OMAP_OFF_EN |
- OMAP_MUX_MODE0),
-};
-
-static struct omap_board_data serial1_data __initdata = {
- .id = 0,
- .pads = serial1_pads,
- .pads_cnt = ARRAY_SIZE(serial1_pads),
-};
-
-static struct omap_board_data serial2_data __initdata = {
- .id = 1,
- .pads = serial2_pads,
- .pads_cnt = ARRAY_SIZE(serial2_pads),
-};
-
-static struct omap_board_data serial3_data __initdata = {
- .id = 2,
- .pads = serial3_pads,
- .pads_cnt = ARRAY_SIZE(serial3_pads),
-};
-
-static inline void board_serial_init(void)
-{
- omap_serial_init_port(&serial1_data);
- omap_serial_init_port(&serial2_data);
- omap_serial_init_port(&serial3_data);
-}
#else
#define board_mux NULL
-
-static inline void board_serial_init(void)
-{
- omap_serial_init();
-}
#endif
/*
@@ -711,7 +613,7 @@ static void __init omap_3430sdp_init(void)
else
gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
omap_ads7846_init(1, gpio_pendown, 310, NULL);
- board_serial_init();
+ omap_serial_init();
omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
usb_musb_init(NULL);
board_smc91x_init();
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 4b4c9e25a83e..2ceb75d21eb2 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -844,74 +844,8 @@ static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
-static struct omap_device_pad serial2_pads[] __initdata = {
- OMAP_MUX_STATIC("uart2_cts.uart2_cts",
- OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart2_rts.uart2_rts",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart2_rx.uart2_rx",
- OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart2_tx.uart2_tx",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
-};
-
-static struct omap_device_pad serial3_pads[] __initdata = {
- OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
- OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
- OMAP_PIN_INPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
-};
-
-static struct omap_device_pad serial4_pads[] __initdata = {
- OMAP_MUX_STATIC("uart4_rx.uart4_rx",
- OMAP_PIN_INPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart4_tx.uart4_tx",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
-};
-
-static struct omap_board_data serial2_data __initdata = {
- .id = 1,
- .pads = serial2_pads,
- .pads_cnt = ARRAY_SIZE(serial2_pads),
-};
-
-static struct omap_board_data serial3_data __initdata = {
- .id = 2,
- .pads = serial3_pads,
- .pads_cnt = ARRAY_SIZE(serial3_pads),
-};
-
-static struct omap_board_data serial4_data __initdata = {
- .id = 3,
- .pads = serial4_pads,
- .pads_cnt = ARRAY_SIZE(serial4_pads),
-};
-
-static inline void board_serial_init(void)
-{
- struct omap_board_data bdata;
- bdata.flags = 0;
- bdata.pads = NULL;
- bdata.pads_cnt = 0;
- bdata.id = 0;
- /* pass dummy data for UART1 */
- omap_serial_init_port(&bdata);
-
- omap_serial_init_port(&serial2_data);
- omap_serial_init_port(&serial3_data);
- omap_serial_init_port(&serial4_data);
-}
#else
#define board_mux NULL
-
-static inline void board_serial_init(void)
-{
- omap_serial_init();
-}
#endif
static void omap4_sdp4430_wifi_mux_init(void)
@@ -961,7 +895,7 @@ static void __init omap_4430sdp_init(void)
omap4_i2c_init();
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
- board_serial_init();
+ omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index f8c5b2cc7c9c..d58756060483 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -69,7 +69,6 @@ static void __init omap_generic_init(void)
if (node)
irq_domain_add_simple(node, 0);
- omap_serial_init();
omap_sdrc_init(NULL, NULL);
of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 72d76ed94a65..42a4d11fad23 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -644,15 +644,15 @@ static inline void board_serial_init(void)
bdata.pads_cnt = 0;
bdata.id = 0;
- omap_serial_init_port(&bdata);
+ omap_serial_init_port(&bdata, NULL);
bdata.id = 1;
- omap_serial_init_port(&bdata);
+ omap_serial_init_port(&bdata, NULL);
bdata.id = 2;
bdata.pads = serial2_pads;
bdata.pads_cnt = ARRAY_SIZE(serial2_pads);
- omap_serial_init_port(&bdata);
+ omap_serial_init_port(&bdata, NULL);
}
#else
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 8b06c6a60d02..e96a2e7ad36f 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -364,74 +364,8 @@ static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
-static struct omap_device_pad serial2_pads[] __initdata = {
- OMAP_MUX_STATIC("uart2_cts.uart2_cts",
- OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart2_rts.uart2_rts",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart2_rx.uart2_rx",
- OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart2_tx.uart2_tx",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
-};
-
-static struct omap_device_pad serial3_pads[] __initdata = {
- OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
- OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
- OMAP_PIN_INPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
-};
-
-static struct omap_device_pad serial4_pads[] __initdata = {
- OMAP_MUX_STATIC("uart4_rx.uart4_rx",
- OMAP_PIN_INPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart4_tx.uart4_tx",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
-};
-
-static struct omap_board_data serial2_data __initdata = {
- .id = 1,
- .pads = serial2_pads,
- .pads_cnt = ARRAY_SIZE(serial2_pads),
-};
-
-static struct omap_board_data serial3_data __initdata = {
- .id = 2,
- .pads = serial3_pads,
- .pads_cnt = ARRAY_SIZE(serial3_pads),
-};
-
-static struct omap_board_data serial4_data __initdata = {
- .id = 3,
- .pads = serial4_pads,
- .pads_cnt = ARRAY_SIZE(serial4_pads),
-};
-
-static inline void board_serial_init(void)
-{
- struct omap_board_data bdata;
- bdata.flags = 0;
- bdata.pads = NULL;
- bdata.pads_cnt = 0;
- bdata.id = 0;
- /* pass dummy data for UART1 */
- omap_serial_init_port(&bdata);
-
- omap_serial_init_port(&serial2_data);
- omap_serial_init_port(&serial3_data);
- omap_serial_init_port(&serial4_data);
-}
#else
#define board_mux NULL
-
-static inline void board_serial_init(void)
-{
- omap_serial_init();
-}
#endif
/* Display DVI */
@@ -562,7 +496,7 @@ static void __init omap4_panda_init(void)
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
- board_serial_init();
+ omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 9403b2ce6c85..febffde2ff10 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -24,9 +24,11 @@
#ifndef __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
#define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
+#ifndef __ASSEMBLER__
#include <linux/delay.h>
#include <plat/common.h>
+#include <asm/proc-fns.h>
#ifdef CONFIG_SOC_OMAP2420
extern void omap242x_map_common_io(void);
@@ -168,23 +170,23 @@ void omap3_intc_resume_idle(void);
void omap2_intc_handle_irq(struct pt_regs *regs);
void omap3_intc_handle_irq(struct pt_regs *regs);
-/*
- * wfi used in low power code. Directly opcode is used instead
- * of instruction to avoid mulit-omap build break
- */
-#ifdef CONFIG_THUMB2_KERNEL
-#define do_wfi() __asm__ __volatile__ ("wfi" : : : "memory")
-#else
-#define do_wfi() \
- __asm__ __volatile__ (".word 0xe320f003" : : : "memory")
+#ifdef CONFIG_CACHE_L2X0
+extern void __iomem *omap4_get_l2cache_base(void);
#endif
-#ifdef CONFIG_CACHE_L2X0
-extern void __iomem *l2cache_base;
+#ifdef CONFIG_SMP
+extern void __iomem *omap4_get_scu_base(void);
+#else
+static inline void __iomem *omap4_get_scu_base(void)
+{
+ return NULL;
+}
#endif
extern void __init gic_init_irq(void);
extern void omap_smc1(u32 fn, u32 arg);
+extern void __iomem *omap4_get_sar_ram_base(void);
+extern void omap_do_wfi(void);
#ifdef CONFIG_SMP
/* Needed for secondary core boot */
@@ -194,4 +196,44 @@ extern void omap_auxcoreboot_addr(u32 cpu_addr);
extern u32 omap_read_auxcoreboot0(void);
#endif
+#if defined(CONFIG_SMP) && defined(CONFIG_PM)
+extern int omap4_mpuss_init(void);
+extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
+extern int omap4_finish_suspend(unsigned long cpu_state);
+extern void omap4_cpu_resume(void);
+extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
+extern u32 omap4_mpuss_read_prev_context_state(void);
+#else
+static inline int omap4_enter_lowpower(unsigned int cpu,
+ unsigned int power_state)
+{
+ cpu_do_idle();
+ return 0;
+}
+
+static inline int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
+{
+ cpu_do_idle();
+ return 0;
+}
+
+static inline int omap4_mpuss_init(void)
+{
+ return 0;
+}
+
+static inline int omap4_finish_suspend(unsigned long cpu_state)
+{
+ return 0;
+}
+
+static inline void omap4_cpu_resume(void)
+{}
+
+static inline u32 omap4_mpuss_read_prev_context_state(void)
+{
+ return 0;
+}
+#endif
+#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index e20332f4abdc..464cffde58fe 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -25,12 +25,12 @@
#include <linux/sched.h>
#include <linux/cpuidle.h>
#include <linux/export.h>
+#include <linux/cpu_pm.h>
#include <plat/prcm.h>
#include <plat/irqs.h>
#include "powerdomain.h"
#include "clockdomain.h"
-#include <plat/serial.h>
#include "pm.h"
#include "control.h"
@@ -124,9 +124,23 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
}
+ /*
+ * Call idle CPU PM enter notifier chain so that
+ * VFP context is saved.
+ */
+ if (mpu_state == PWRDM_POWER_OFF)
+ cpu_pm_enter();
+
/* Execute ARM wfi */
omap_sram_idle();
+ /*
+ * Call idle CPU PM enter notifier chain to restore
+ * VFP context.
+ */
+ if (pwrdm_read_prev_pwrst(mpu_pd) == PWRDM_POWER_OFF)
+ cpu_pm_exit();
+
/* Re-allow idle for C1 */
if (index == 0) {
pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
@@ -245,11 +259,6 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
struct omap3_idle_statedata *cx;
int ret;
- if (!omap3_can_sleep()) {
- new_state_idx = drv->safe_state_index;
- goto select_state;
- }
-
/*
* Prevent idle completely if CAM is active.
* CAM does not have wakeup capability in OMAP3.
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
new file mode 100644
index 000000000000..cfdbb86bc84e
--- /dev/null
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -0,0 +1,245 @@
+/*
+ * OMAP4 CPU idle Routines
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
+#include <linux/export.h>
+#include <linux/clockchips.h>
+
+#include <asm/proc-fns.h>
+
+#include "common.h"
+#include "pm.h"
+#include "prm.h"
+
+#ifdef CONFIG_CPU_IDLE
+
+/* Machine specific information to be recorded in the C-state driver_data */
+struct omap4_idle_statedata {
+ u32 cpu_state;
+ u32 mpu_logic_state;
+ u32 mpu_state;
+ u8 valid;
+};
+
+static struct cpuidle_params cpuidle_params_table[] = {
+ /* C1 - CPU0 ON + CPU1 ON + MPU ON */
+ {.exit_latency = 2 + 2 , .target_residency = 5, .valid = 1},
+ /* C2- CPU0 OFF + CPU1 OFF + MPU CSWR */
+ {.exit_latency = 328 + 440 , .target_residency = 960, .valid = 1},
+ /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
+ {.exit_latency = 460 + 518 , .target_residency = 1100, .valid = 1},
+};
+
+#define OMAP4_NUM_STATES ARRAY_SIZE(cpuidle_params_table)
+
+struct omap4_idle_statedata omap4_idle_data[OMAP4_NUM_STATES];
+static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd;
+
+/**
+ * omap4_enter_idle - Programs OMAP4 to enter the specified state
+ * @dev: cpuidle device
+ * @drv: cpuidle driver
+ * @index: the index of state to be entered
+ *
+ * Called from the CPUidle framework to program the device to the
+ * specified low power state selected by the governor.
+ * Returns the amount of time spent in the low power state.
+ */
+static int omap4_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ struct omap4_idle_statedata *cx =
+ cpuidle_get_statedata(&dev->states_usage[index]);
+ struct timespec ts_preidle, ts_postidle, ts_idle;
+ u32 cpu1_state;
+ int idle_time;
+ int new_state_idx;
+ int cpu_id = smp_processor_id();
+
+ /* Used to keep track of the total time in idle */
+ getnstimeofday(&ts_preidle);
+
+ local_irq_disable();
+ local_fiq_disable();
+
+ /*
+ * CPU0 has to stay ON (i.e in C1) until CPU1 is OFF state.
+ * This is necessary to honour hardware recommondation
+ * of triggeing all the possible low power modes once CPU1 is
+ * out of coherency and in OFF mode.
+ * Update dev->last_state so that governor stats reflects right
+ * data.
+ */
+ cpu1_state = pwrdm_read_pwrst(cpu1_pd);
+ if (cpu1_state != PWRDM_POWER_OFF) {
+ new_state_idx = drv->safe_state_index;
+ cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
+ }
+
+ if (index > 0)
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
+
+ /*
+ * Call idle CPU PM enter notifier chain so that
+ * VFP and per CPU interrupt context is saved.
+ */
+ if (cx->cpu_state == PWRDM_POWER_OFF)
+ cpu_pm_enter();
+
+ pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
+ omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+
+ /*
+ * Call idle CPU cluster PM enter notifier chain
+ * to save GIC and wakeupgen context.
+ */
+ if ((cx->mpu_state == PWRDM_POWER_RET) &&
+ (cx->mpu_logic_state == PWRDM_POWER_OFF))
+ cpu_cluster_pm_enter();
+
+ omap4_enter_lowpower(dev->cpu, cx->cpu_state);
+
+ /*
+ * Call idle CPU PM exit notifier chain to restore
+ * VFP and per CPU IRQ context. Only CPU0 state is
+ * considered since CPU1 is managed by CPU hotplug.
+ */
+ if (pwrdm_read_prev_pwrst(cpu0_pd) == PWRDM_POWER_OFF)
+ cpu_pm_exit();
+
+ /*
+ * Call idle CPU cluster PM exit notifier chain
+ * to restore GIC and wakeupgen context.
+ */
+ if (omap4_mpuss_read_prev_context_state())
+ cpu_cluster_pm_exit();
+
+ if (index > 0)
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
+
+ getnstimeofday(&ts_postidle);
+ ts_idle = timespec_sub(ts_postidle, ts_preidle);
+
+ local_irq_enable();
+ local_fiq_enable();
+
+ idle_time = ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * \
+ USEC_PER_SEC;
+
+ /* Update cpuidle counters */
+ dev->last_residency = idle_time;
+
+ return index;
+}
+
+DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev);
+
+struct cpuidle_driver omap4_idle_driver = {
+ .name = "omap4_idle",
+ .owner = THIS_MODULE,
+};
+
+static inline void _fill_cstate(struct cpuidle_driver *drv,
+ int idx, const char *descr)
+{
+ struct cpuidle_state *state = &drv->states[idx];
+
+ state->exit_latency = cpuidle_params_table[idx].exit_latency;
+ state->target_residency = cpuidle_params_table[idx].target_residency;
+ state->flags = CPUIDLE_FLAG_TIME_VALID;
+ state->enter = omap4_enter_idle;
+ sprintf(state->name, "C%d", idx + 1);
+ strncpy(state->desc, descr, CPUIDLE_DESC_LEN);
+}
+
+static inline struct omap4_idle_statedata *_fill_cstate_usage(
+ struct cpuidle_device *dev,
+ int idx)
+{
+ struct omap4_idle_statedata *cx = &omap4_idle_data[idx];
+ struct cpuidle_state_usage *state_usage = &dev->states_usage[idx];
+
+ cx->valid = cpuidle_params_table[idx].valid;
+ cpuidle_set_statedata(state_usage, cx);
+
+ return cx;
+}
+
+
+
+/**
+ * omap4_idle_init - Init routine for OMAP4 idle
+ *
+ * Registers the OMAP4 specific cpuidle driver to the cpuidle
+ * framework with the valid set of states.
+ */
+int __init omap4_idle_init(void)
+{
+ struct omap4_idle_statedata *cx;
+ struct cpuidle_device *dev;
+ struct cpuidle_driver *drv = &omap4_idle_driver;
+ unsigned int cpu_id = 0;
+
+ mpu_pd = pwrdm_lookup("mpu_pwrdm");
+ cpu0_pd = pwrdm_lookup("cpu0_pwrdm");
+ cpu1_pd = pwrdm_lookup("cpu1_pwrdm");
+ if ((!mpu_pd) || (!cpu0_pd) || (!cpu1_pd))
+ return -ENODEV;
+
+
+ drv->safe_state_index = -1;
+ dev = &per_cpu(omap4_idle_dev, cpu_id);
+ dev->cpu = cpu_id;
+
+ /* C1 - CPU0 ON + CPU1 ON + MPU ON */
+ _fill_cstate(drv, 0, "MPUSS ON");
+ drv->safe_state_index = 0;
+ cx = _fill_cstate_usage(dev, 0);
+ cx->valid = 1; /* C1 is always valid */
+ cx->cpu_state = PWRDM_POWER_ON;
+ cx->mpu_state = PWRDM_POWER_ON;
+ cx->mpu_logic_state = PWRDM_POWER_RET;
+
+ /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
+ _fill_cstate(drv, 1, "MPUSS CSWR");
+ cx = _fill_cstate_usage(dev, 1);
+ cx->cpu_state = PWRDM_POWER_OFF;
+ cx->mpu_state = PWRDM_POWER_RET;
+ cx->mpu_logic_state = PWRDM_POWER_RET;
+
+ /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
+ _fill_cstate(drv, 2, "MPUSS OSWR");
+ cx = _fill_cstate_usage(dev, 2);
+ cx->cpu_state = PWRDM_POWER_OFF;
+ cx->mpu_state = PWRDM_POWER_RET;
+ cx->mpu_logic_state = PWRDM_POWER_OFF;
+
+ drv->state_count = OMAP4_NUM_STATES;
+ cpuidle_register_driver(&omap4_idle_driver);
+
+ dev->state_count = OMAP4_NUM_STATES;
+ if (cpuidle_register_device(dev)) {
+ pr_err("%s: CPUidle register device failed\n", __func__);
+ return -EIO;
+ }
+
+ return 0;
+}
+#else
+int __init omap4_idle_init(void)
+{
+ return 0;
+}
+#endif /* CONFIG_CPU_IDLE */
diff --git a/arch/arm/mach-omap2/include/mach/barriers.h b/arch/arm/mach-omap2/include/mach/barriers.h
new file mode 100644
index 000000000000..4fa72c7cc7cd
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/barriers.h
@@ -0,0 +1,31 @@
+/*
+ * OMAP memory barrier header.
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MACH_BARRIERS_H
+#define __MACH_BARRIERS_H
+
+extern void omap_bus_sync(void);
+
+#define rmb() dsb()
+#define wmb() do { dsb(); outer_sync(); omap_bus_sync(); } while (0)
+#define mb() wmb()
+
+#endif /* __MACH_BARRIERS_H */
diff --git a/arch/arm/mach-omap2/include/mach/omap-secure.h b/arch/arm/mach-omap2/include/mach/omap-secure.h
new file mode 100644
index 000000000000..c90a43589abe
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/omap-secure.h
@@ -0,0 +1,57 @@
+/*
+ * omap-secure.h: OMAP Secure infrastructure header.
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP_ARCH_OMAP_SECURE_H
+#define OMAP_ARCH_OMAP_SECURE_H
+
+/* Monitor error code */
+#define API_HAL_RET_VALUE_NS2S_CONVERSION_ERROR 0xFFFFFFFE
+#define API_HAL_RET_VALUE_SERVICE_UNKNWON 0xFFFFFFFF
+
+/* HAL API error codes */
+#define API_HAL_RET_VALUE_OK 0x00
+#define API_HAL_RET_VALUE_FAIL 0x01
+
+/* Secure HAL API flags */
+#define FLAG_START_CRITICAL 0x4
+#define FLAG_IRQFIQ_MASK 0x3
+#define FLAG_IRQ_ENABLE 0x2
+#define FLAG_FIQ_ENABLE 0x1
+#define NO_FLAG 0x0
+
+/* Maximum Secure memory storage size */
+#define OMAP_SECURE_RAM_STORAGE (88 * SZ_1K)
+
+/* Secure low power HAL API index */
+#define OMAP4_HAL_SAVESECURERAM_INDEX 0x1a
+#define OMAP4_HAL_SAVEHW_INDEX 0x1b
+#define OMAP4_HAL_SAVEALL_INDEX 0x1c
+#define OMAP4_HAL_SAVEGIC_INDEX 0x1d
+
+/* Secure Monitor mode APIs */
+#define OMAP4_MON_SCU_PWR_INDEX 0x108
+#define OMAP4_MON_L2X0_DBG_CTRL_INDEX 0x100
+#define OMAP4_MON_L2X0_CTRL_INDEX 0x102
+#define OMAP4_MON_L2X0_AUXCTRL_INDEX 0x109
+#define OMAP4_MON_L2X0_PREFETCH_INDEX 0x113
+
+/* Secure PPA(Primary Protected Application) APIs */
+#define OMAP4_PPA_L2_POR_INDEX 0x23
+#define OMAP4_PPA_CPU_ACTRL_SMP_INDEX 0x25
+
+#ifndef __ASSEMBLER__
+
+extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs,
+ u32 arg1, u32 arg2, u32 arg3, u32 arg4);
+extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
+extern phys_addr_t omap_secure_ram_mempool_base(void);
+
+#endif /* __ASSEMBLER__ */
+#endif /* OMAP_ARCH_OMAP_SECURE_H */
diff --git a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
new file mode 100644
index 000000000000..d79321b0f2a2
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
@@ -0,0 +1,39 @@
+/*
+ * OMAP WakeupGen header file
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP_ARCH_WAKEUPGEN_H
+#define OMAP_ARCH_WAKEUPGEN_H
+
+#define OMAP_WKG_CONTROL_0 0x00
+#define OMAP_WKG_ENB_A_0 0x10
+#define OMAP_WKG_ENB_B_0 0x14
+#define OMAP_WKG_ENB_C_0 0x18
+#define OMAP_WKG_ENB_D_0 0x1c
+#define OMAP_WKG_ENB_SECURE_A_0 0x20
+#define OMAP_WKG_ENB_SECURE_B_0 0x24
+#define OMAP_WKG_ENB_SECURE_C_0 0x28
+#define OMAP_WKG_ENB_SECURE_D_0 0x2c
+#define OMAP_WKG_ENB_A_1 0x410
+#define OMAP_WKG_ENB_B_1 0x414
+#define OMAP_WKG_ENB_C_1 0x418
+#define OMAP_WKG_ENB_D_1 0x41c
+#define OMAP_WKG_ENB_SECURE_A_1 0x420
+#define OMAP_WKG_ENB_SECURE_B_1 0x424
+#define OMAP_WKG_ENB_SECURE_C_1 0x428
+#define OMAP_WKG_ENB_SECURE_D_1 0x42c
+#define OMAP_AUX_CORE_BOOT_0 0x800
+#define OMAP_AUX_CORE_BOOT_1 0x804
+#define OMAP_PTMSYNCREQ_MASK 0xc00
+#define OMAP_PTMSYNCREQ_EN 0xc04
+#define OMAP_TIMESTAMPCYCLELO 0xc08
+#define OMAP_TIMESTAMPCYCLEHI 0xc0c
+
+extern int __init omap_wakeupgen_init(void);
+#endif
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 73d617f0dc4a..3f174d51f67f 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -254,6 +254,15 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
.length = L4_EMU_44XX_SIZE,
.type = MT_DEVICE,
},
+#ifdef CONFIG_OMAP4_ERRATA_I688
+ {
+ .virtual = OMAP4_SRAM_VA,
+ .pfn = __phys_to_pfn(OMAP4_SRAM_PA),
+ .length = PAGE_SIZE,
+ .type = MT_MEMORY_SO,
+ },
+#endif
+
};
#endif
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 655e9480eb98..e1cc75d1a57a 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -32,6 +32,8 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
#include <asm/system.h>
@@ -39,6 +41,7 @@
#include "control.h"
#include "mux.h"
+#include "prm.h"
#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
#define OMAP_MUX_BASE_SZ 0x5ca
@@ -306,7 +309,8 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads)
pad->idle = bpad->idle;
pad->off = bpad->off;
- if (pad->flags & OMAP_DEVICE_PAD_REMUX)
+ if (pad->flags &
+ (OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP))
nr_pads_dynamic++;
pr_debug("%s: Initialized %s\n", __func__, pad->name);
@@ -331,7 +335,8 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads)
for (i = 0; i < hmux->nr_pads; i++) {
struct omap_device_pad *pad = &hmux->pads[i];
- if (pad->flags & OMAP_DEVICE_PAD_REMUX) {
+ if (pad->flags &
+ (OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP)) {
pr_debug("%s: pad %s tagged dynamic\n",
__func__, pad->name);
hmux->pads_dynamic[nr_pads_dynamic] = pad;
@@ -351,6 +356,78 @@ err1:
return NULL;
}
+/**
+ * omap_hwmod_mux_scan_wakeups - omap hwmod scan wakeup pads
+ * @hmux: Pads for a hwmod
+ * @mpu_irqs: MPU irq array for a hwmod
+ *
+ * Scans the wakeup status of pads for a single hwmod. If an irq
+ * array is defined for this mux, the parser will call the registered
+ * ISRs for corresponding pads, otherwise the parser will stop at the
+ * first wakeup active pad and return. Returns true if there is a
+ * pending and non-served wakeup event for the mux, otherwise false.
+ */
+static bool omap_hwmod_mux_scan_wakeups(struct omap_hwmod_mux_info *hmux,
+ struct omap_hwmod_irq_info *mpu_irqs)
+{
+ int i, irq;
+ unsigned int val;
+ u32 handled_irqs = 0;
+
+ for (i = 0; i < hmux->nr_pads_dynamic; i++) {
+ struct omap_device_pad *pad = hmux->pads_dynamic[i];
+
+ if (!(pad->flags & OMAP_DEVICE_PAD_WAKEUP) ||
+ !(pad->idle & OMAP_WAKEUP_EN))
+ continue;
+
+ val = omap_mux_read(pad->partition, pad->mux->reg_offset);
+ if (!(val & OMAP_WAKEUP_EVENT))
+ continue;
+
+ if (!hmux->irqs)
+ return true;
+
+ irq = hmux->irqs[i];
+ /* make sure we only handle each irq once */
+ if (handled_irqs & 1 << irq)
+ continue;
+
+ handled_irqs |= 1 << irq;
+
+ generic_handle_irq(mpu_irqs[irq].irq);
+ }
+
+ return false;
+}
+
+/**
+ * _omap_hwmod_mux_handle_irq - Process wakeup events for a single hwmod
+ *
+ * Checks a single hwmod for every wakeup capable pad to see if there is an
+ * active wakeup event. If this is the case, call the corresponding ISR.
+ */
+static int _omap_hwmod_mux_handle_irq(struct omap_hwmod *oh, void *data)
+{
+ if (!oh->mux || !oh->mux->enabled)
+ return 0;
+ if (omap_hwmod_mux_scan_wakeups(oh->mux, oh->mpu_irqs))
+ generic_handle_irq(oh->mpu_irqs[0].irq);
+ return 0;
+}
+
+/**
+ * omap_hwmod_mux_handle_irq - Process pad wakeup irqs.
+ *
+ * Calls a function for each registered omap_hwmod to check
+ * pad wakeup statuses.
+ */
+static irqreturn_t omap_hwmod_mux_handle_irq(int irq, void *unused)
+{
+ omap_hwmod_for_each(_omap_hwmod_mux_handle_irq, NULL);
+ return IRQ_HANDLED;
+}
+
/* Assumes the calling function takes care of locking */
void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state)
{
@@ -715,6 +792,7 @@ static void __init omap_mux_free_names(struct omap_mux *m)
static int __init omap_mux_late_init(void)
{
struct omap_mux_partition *partition;
+ int ret;
list_for_each_entry(partition, &mux_partitions, node) {
struct omap_mux_entry *e, *tmp;
@@ -735,6 +813,13 @@ static int __init omap_mux_late_init(void)
}
}
+ ret = request_irq(omap_prcm_event_to_irq("io"),
+ omap_hwmod_mux_handle_irq, IRQF_SHARED | IRQF_NO_SUSPEND,
+ "hwmod_io", omap_mux_late_init);
+
+ if (ret)
+ pr_warning("mux: Failed to setup hwmod io irq %d\n", ret);
+
omap_mux_dbg_init();
return 0;
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index 4ee6aeca885a..b13ef7ef5ef4 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -18,11 +18,6 @@
#include <linux/linkage.h>
#include <linux/init.h>
-/* Physical address needed since MMU not enabled yet on secondary core */
-#define OMAP4_AUX_CORE_BOOT1_PA 0x48281804
-
- __INIT
-
/*
* OMAP4 specific entry point for secondary CPU to jump from ROM
* code. This routine also provides a holding flag into which
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index e5a1c3f40a86..adbe4d8c7caf 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -22,6 +22,8 @@
#include "common.h"
+#include "powerdomain.h"
+
int platform_cpu_kill(unsigned int cpu)
{
return 1;
@@ -33,6 +35,8 @@ int platform_cpu_kill(unsigned int cpu)
*/
void platform_cpu_die(unsigned int cpu)
{
+ unsigned int this_cpu;
+
flush_cache_all();
dsb();
@@ -40,15 +44,15 @@ void platform_cpu_die(unsigned int cpu)
* we're ready for shutdown now, so do it
*/
if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
- printk(KERN_CRIT "Secure clear status failed\n");
+ pr_err("Secure clear status failed\n");
for (;;) {
/*
- * Execute WFI
+ * Enter into low power state
*/
- do_wfi();
-
- if (omap_read_auxcoreboot0() == cpu) {
+ omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF);
+ this_cpu = smp_processor_id();
+ if (omap_read_auxcoreboot0() == this_cpu) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
new file mode 100644
index 000000000000..1d5d01056558
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -0,0 +1,398 @@
+/*
+ * OMAP MPUSS low power code
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * OMAP4430 MPUSS mainly consists of dual Cortex-A9 with per-CPU
+ * Local timer and Watchdog, GIC, SCU, PL310 L2 cache controller,
+ * CPU0 and CPU1 LPRM modules.
+ * CPU0, CPU1 and MPUSS each have there own power domain and
+ * hence multiple low power combinations of MPUSS are possible.
+ *
+ * The CPU0 and CPU1 can't support Closed switch Retention (CSWR)
+ * because the mode is not supported by hw constraints of dormant
+ * mode. While waking up from the dormant mode, a reset signal
+ * to the Cortex-A9 processor must be asserted by the external
+ * power controller.
+ *
+ * With architectural inputs and hardware recommendations, only
+ * below modes are supported from power gain vs latency point of view.
+ *
+ * CPU0 CPU1 MPUSS
+ * ----------------------------------------------
+ * ON ON ON
+ * ON(Inactive) OFF ON(Inactive)
+ * OFF OFF CSWR
+ * OFF OFF OSWR
+ * OFF OFF OFF(Device OFF *TBD)
+ * ----------------------------------------------
+ *
+ * Note: CPU0 is the master core and it is the last CPU to go down
+ * and first to wake-up when MPUSS low power states are excercised
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/smp_scu.h>
+#include <asm/system.h>
+#include <asm/pgalloc.h>
+#include <asm/suspend.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <plat/omap44xx.h>
+
+#include "common.h"
+#include "omap4-sar-layout.h"
+#include "pm.h"
+#include "prcm_mpu44xx.h"
+#include "prminst44xx.h"
+#include "prcm44xx.h"
+#include "prm44xx.h"
+#include "prm-regbits-44xx.h"
+
+#ifdef CONFIG_SMP
+
+struct omap4_cpu_pm_info {
+ struct powerdomain *pwrdm;
+ void __iomem *scu_sar_addr;
+ void __iomem *wkup_sar_addr;
+ void __iomem *l2x0_sar_addr;
+};
+
+static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info);
+static struct powerdomain *mpuss_pd;
+static void __iomem *sar_base;
+
+/*
+ * Program the wakeup routine address for the CPU0 and CPU1
+ * used for OFF or DORMANT wakeup.
+ */
+static inline void set_cpu_wakeup_addr(unsigned int cpu_id, u32 addr)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+
+ __raw_writel(addr, pm_info->wkup_sar_addr);
+}
+
+/*
+ * Set the CPUx powerdomain's previous power state
+ */
+static inline void set_cpu_next_pwrst(unsigned int cpu_id,
+ unsigned int power_state)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+
+ pwrdm_set_next_pwrst(pm_info->pwrdm, power_state);
+}
+
+/*
+ * Read CPU's previous power state
+ */
+static inline unsigned int read_cpu_prev_pwrst(unsigned int cpu_id)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+
+ return pwrdm_read_prev_pwrst(pm_info->pwrdm);
+}
+
+/*
+ * Clear the CPUx powerdomain's previous power state
+ */
+static inline void clear_cpu_prev_pwrst(unsigned int cpu_id)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+
+ pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
+}
+
+/*
+ * Store the SCU power status value to scratchpad memory
+ */
+static void scu_pwrst_prepare(unsigned int cpu_id, unsigned int cpu_state)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+ u32 scu_pwr_st;
+
+ switch (cpu_state) {
+ case PWRDM_POWER_RET:
+ scu_pwr_st = SCU_PM_DORMANT;
+ break;
+ case PWRDM_POWER_OFF:
+ scu_pwr_st = SCU_PM_POWEROFF;
+ break;
+ case PWRDM_POWER_ON:
+ case PWRDM_POWER_INACTIVE:
+ default:
+ scu_pwr_st = SCU_PM_NORMAL;
+ break;
+ }
+
+ __raw_writel(scu_pwr_st, pm_info->scu_sar_addr);
+}
+
+/* Helper functions for MPUSS OSWR */
+static inline void mpuss_clear_prev_logic_pwrst(void)
+{
+ u32 reg;
+
+ reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
+ omap4_prminst_write_inst_reg(reg, OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
+}
+
+static inline void cpu_clear_prev_logic_pwrst(unsigned int cpu_id)
+{
+ u32 reg;
+
+ if (cpu_id) {
+ reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU1_INST,
+ OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET);
+ omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU1_INST,
+ OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET);
+ } else {
+ reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU0_INST,
+ OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET);
+ omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU0_INST,
+ OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET);
+ }
+}
+
+/**
+ * omap4_mpuss_read_prev_context_state:
+ * Function returns the MPUSS previous context state
+ */
+u32 omap4_mpuss_read_prev_context_state(void)
+{
+ u32 reg;
+
+ reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
+ reg &= OMAP4430_LOSTCONTEXT_DFF_MASK;
+ return reg;
+}
+
+/*
+ * Store the CPU cluster state for L2X0 low power operations.
+ */
+static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+
+ __raw_writel(save_state, pm_info->l2x0_sar_addr);
+}
+
+/*
+ * Save the L2X0 AUXCTRL and POR value to SAR memory. Its used to
+ * in every restore MPUSS OFF path.
+ */
+#ifdef CONFIG_CACHE_L2X0
+static void save_l2x0_context(void)
+{
+ u32 val;
+ void __iomem *l2x0_base = omap4_get_l2cache_base();
+
+ val = __raw_readl(l2x0_base + L2X0_AUX_CTRL);
+ __raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET);
+ val = __raw_readl(l2x0_base + L2X0_PREFETCH_CTRL);
+ __raw_writel(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET);
+}
+#else
+static void save_l2x0_context(void)
+{}
+#endif
+
+/**
+ * omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function
+ * The purpose of this function is to manage low power programming
+ * of OMAP4 MPUSS subsystem
+ * @cpu : CPU ID
+ * @power_state: Low power state.
+ *
+ * MPUSS states for the context save:
+ * save_state =
+ * 0 - Nothing lost and no need to save: MPUSS INACTIVE
+ * 1 - CPUx L1 and logic lost: MPUSS CSWR
+ * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR
+ * 3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF
+ */
+int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
+{
+ unsigned int save_state = 0;
+ unsigned int wakeup_cpu;
+
+ if (omap_rev() == OMAP4430_REV_ES1_0)
+ return -ENXIO;
+
+ switch (power_state) {
+ case PWRDM_POWER_ON:
+ case PWRDM_POWER_INACTIVE:
+ save_state = 0;
+ break;
+ case PWRDM_POWER_OFF:
+ save_state = 1;
+ break;
+ case PWRDM_POWER_RET:
+ default:
+ /*
+ * CPUx CSWR is invalid hardware state. Also CPUx OSWR
+ * doesn't make much scense, since logic is lost and $L1
+ * needs to be cleaned because of coherency. This makes
+ * CPUx OSWR equivalent to CPUX OFF and hence not supported
+ */
+ WARN_ON(1);
+ return -ENXIO;
+ }
+
+ pwrdm_pre_transition();
+
+ /*
+ * Check MPUSS next state and save interrupt controller if needed.
+ * In MPUSS OSWR or device OFF, interrupt controller contest is lost.
+ */
+ mpuss_clear_prev_logic_pwrst();
+ pwrdm_clear_all_prev_pwrst(mpuss_pd);
+ if ((pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_RET) &&
+ (pwrdm_read_logic_retst(mpuss_pd) == PWRDM_POWER_OFF))
+ save_state = 2;
+
+ clear_cpu_prev_pwrst(cpu);
+ cpu_clear_prev_logic_pwrst(cpu);
+ set_cpu_next_pwrst(cpu, power_state);
+ set_cpu_wakeup_addr(cpu, virt_to_phys(omap4_cpu_resume));
+ scu_pwrst_prepare(cpu, power_state);
+ l2x0_pwrst_prepare(cpu, save_state);
+
+ /*
+ * Call low level function with targeted low power state.
+ */
+ cpu_suspend(save_state, omap4_finish_suspend);
+
+ /*
+ * Restore the CPUx power state to ON otherwise CPUx
+ * power domain can transitions to programmed low power
+ * state while doing WFI outside the low powe code. On
+ * secure devices, CPUx does WFI which can result in
+ * domain transition
+ */
+ wakeup_cpu = smp_processor_id();
+ set_cpu_next_pwrst(wakeup_cpu, PWRDM_POWER_ON);
+
+ pwrdm_post_transition();
+
+ return 0;
+}
+
+/**
+ * omap4_hotplug_cpu: OMAP4 CPU hotplug entry
+ * @cpu : CPU ID
+ * @power_state: CPU low power state.
+ */
+int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
+{
+ unsigned int cpu_state = 0;
+
+ if (omap_rev() == OMAP4430_REV_ES1_0)
+ return -ENXIO;
+
+ if (power_state == PWRDM_POWER_OFF)
+ cpu_state = 1;
+
+ clear_cpu_prev_pwrst(cpu);
+ set_cpu_next_pwrst(cpu, power_state);
+ set_cpu_wakeup_addr(cpu, virt_to_phys(omap_secondary_startup));
+ scu_pwrst_prepare(cpu, power_state);
+
+ /*
+ * CPU never retuns back if targetted power state is OFF mode.
+ * CPU ONLINE follows normal CPU ONLINE ptah via
+ * omap_secondary_startup().
+ */
+ omap4_finish_suspend(cpu_state);
+
+ set_cpu_next_pwrst(cpu, PWRDM_POWER_ON);
+ return 0;
+}
+
+
+/*
+ * Initialise OMAP4 MPUSS
+ */
+int __init omap4_mpuss_init(void)
+{
+ struct omap4_cpu_pm_info *pm_info;
+
+ if (omap_rev() == OMAP4430_REV_ES1_0) {
+ WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
+ return -ENODEV;
+ }
+
+ sar_base = omap4_get_sar_ram_base();
+
+ /* Initilaise per CPU PM information */
+ pm_info = &per_cpu(omap4_pm_info, 0x0);
+ pm_info->scu_sar_addr = sar_base + SCU_OFFSET0;
+ pm_info->wkup_sar_addr = sar_base + CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
+ pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0;
+ pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm");
+ if (!pm_info->pwrdm) {
+ pr_err("Lookup failed for CPU0 pwrdm\n");
+ return -ENODEV;
+ }
+
+ /* Clear CPU previous power domain state */
+ pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
+ cpu_clear_prev_logic_pwrst(0);
+
+ /* Initialise CPU0 power domain state to ON */
+ pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
+
+ pm_info = &per_cpu(omap4_pm_info, 0x1);
+ pm_info->scu_sar_addr = sar_base + SCU_OFFSET1;
+ pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+ pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
+ pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm");
+ if (!pm_info->pwrdm) {
+ pr_err("Lookup failed for CPU1 pwrdm\n");
+ return -ENODEV;
+ }
+
+ /* Clear CPU previous power domain state */
+ pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
+ cpu_clear_prev_logic_pwrst(1);
+
+ /* Initialise CPU1 power domain state to ON */
+ pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
+
+ mpuss_pd = pwrdm_lookup("mpu_pwrdm");
+ if (!mpuss_pd) {
+ pr_err("Failed to lookup MPUSS power domain\n");
+ return -ENODEV;
+ }
+ pwrdm_clear_all_prev_pwrst(mpuss_pd);
+ mpuss_clear_prev_logic_pwrst();
+
+ /* Save device type on scratchpad for low level code to use */
+ if (omap_type() != OMAP2_DEVICE_TYPE_GP)
+ __raw_writel(1, sar_base + OMAP_TYPE_OFFSET);
+ else
+ __raw_writel(0, sar_base + OMAP_TYPE_OFFSET);
+
+ save_l2x0_context();
+
+ return 0;
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
new file mode 100644
index 000000000000..69f3c72d959b
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -0,0 +1,81 @@
+/*
+ * OMAP Secure API infrastructure.
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/memblock.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/omap-secure.h>
+
+static phys_addr_t omap_secure_memblock_base;
+
+/**
+ * omap_sec_dispatcher: Routine to dispatch low power secure
+ * service routines
+ * @idx: The HAL API index
+ * @flag: The flag indicating criticality of operation
+ * @nargs: Number of valid arguments out of four.
+ * @arg1, arg2, arg3 args4: Parameters passed to secure API
+ *
+ * Return the non-zero error value on failure.
+ */
+u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2,
+ u32 arg3, u32 arg4)
+{
+ u32 ret;
+ u32 param[5];
+
+ param[0] = nargs;
+ param[1] = arg1;
+ param[2] = arg2;
+ param[3] = arg3;
+ param[4] = arg4;
+
+ /*
+ * Secure API needs physical address
+ * pointer for the parameters
+ */
+ flush_cache_all();
+ outer_clean_range(__pa(param), __pa(param + 5));
+ ret = omap_smc2(idx, flag, __pa(param));
+
+ return ret;
+}
+
+/* Allocate the memory to save secure ram */
+int __init omap_secure_ram_reserve_memblock(void)
+{
+ phys_addr_t paddr;
+ u32 size = OMAP_SECURE_RAM_STORAGE;
+
+ size = ALIGN(size, SZ_1M);
+ paddr = memblock_alloc(size, SZ_1M);
+ if (!paddr) {
+ pr_err("%s: failed to reserve %x bytes\n",
+ __func__, size);
+ return -ENOMEM;
+ }
+ memblock_free(paddr, size);
+ memblock_remove(paddr, size);
+
+ omap_secure_memblock_base = paddr;
+
+ return 0;
+}
+
+phys_addr_t omap_secure_ram_mempool_base(void)
+{
+ return omap_secure_memblock_base;
+}
diff --git a/arch/arm/mach-omap2/omap44xx-smc.S b/arch/arm/mach-omap2/omap-smc.S
index e69d37d95204..f6441c13cd8c 100644
--- a/arch/arm/mach-omap2/omap44xx-smc.S
+++ b/arch/arm/mach-omap2/omap-smc.S
@@ -31,6 +31,29 @@ ENTRY(omap_smc1)
ldmfd sp!, {r2-r12, pc}
ENDPROC(omap_smc1)
+/**
+ * u32 omap_smc2(u32 id, u32 falg, u32 pargs)
+ * Low level common routine for secure HAL and PPA APIs.
+ * @id: Application ID of HAL APIs
+ * @flag: Flag to indicate the criticality of operation
+ * @pargs: Physical address of parameter list starting
+ * with number of parametrs
+ */
+ENTRY(omap_smc2)
+ stmfd sp!, {r4-r12, lr}
+ mov r3, r2
+ mov r2, r1
+ mov r1, #0x0 @ Process ID
+ mov r6, #0xff
+ mov r12, #0x00 @ Secure Service ID
+ mov r7, #0
+ mcr p15, 0, r7, c7, c5, 6
+ dsb
+ dmb
+ smc #0
+ ldmfd sp!, {r4-r12, pc}
+ENDPROC(omap_smc2)
+
ENTRY(omap_modify_auxcoreboot0)
stmfd sp!, {r1-r12, lr}
ldr r12, =0x104
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index e99bc6cd4714..c1bf3ef0ba02 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -24,17 +24,37 @@
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
+#include <mach/omap-secure.h>
#include "common.h"
+#include "clockdomain.h"
+
/* SCU base address */
static void __iomem *scu_base;
static DEFINE_SPINLOCK(boot_lock);
+void __iomem *omap4_get_scu_base(void)
+{
+ return scu_base;
+}
+
void __cpuinit platform_secondary_init(unsigned int cpu)
{
/*
+ * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device.
+ * OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA
+ * init and for CPU1, a secure PPA API provided. CPU0 must be ON
+ * while executing NS_SMP API on CPU1 and PPA version must be 1.4.0+.
+ * OMAP443X GP devices- SMP bit isn't accessible.
+ * OMAP446X GP devices - SMP bit access is enabled on both CPUs.
+ */
+ if (cpu_is_omap443x() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+ omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX,
+ 4, 0, 0, 0, 0, 0);
+
+ /*
* If any interrupts are already enabled for the primary
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
@@ -50,6 +70,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
+ static struct clockdomain *cpu1_clkdm;
+ static bool booted;
/*
* Set synchronisation state between this boot processor
* and the secondary one
@@ -65,6 +87,29 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
omap_modify_auxcoreboot0(0x200, 0xfffffdff);
flush_cache_all();
smp_wmb();
+
+ if (!cpu1_clkdm)
+ cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
+
+ /*
+ * The SGI(Software Generated Interrupts) are not wakeup capable
+ * from low power states. This is known limitation on OMAP4 and
+ * needs to be worked around by using software forced clockdomain
+ * wake-up. To wakeup CPU1, CPU0 forces the CPU1 clockdomain to
+ * software force wakeup. The clockdomain is then put back to
+ * hardware supervised mode.
+ * More details can be found in OMAP4430 TRM - Version J
+ * Section :
+ * 4.3.4.2 Power States of CPU0 and CPU1
+ */
+ if (booted) {
+ clkdm_wakeup(cpu1_clkdm);
+ clkdm_allow_idle(cpu1_clkdm);
+ } else {
+ dsb_sev();
+ booted = true;
+ }
+
gic_raise_softirq(cpumask_of(cpu), 1);
/*
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
new file mode 100644
index 000000000000..d3d8971d7f30
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -0,0 +1,389 @@
+/*
+ * OMAP WakeupGen Source file
+ *
+ * OMAP WakeupGen is the interrupt controller extension used along
+ * with ARM GIC to wake the CPU out from low power states on
+ * external interrupts. It is responsible for generating wakeup
+ * event from the incoming interrupts and enable bits. It is
+ * implemented in MPU always ON power domain. During normal operation,
+ * WakeupGen delivers external interrupts directly to the GIC.
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/cpu.h>
+#include <linux/notifier.h>
+#include <linux/cpu_pm.h>
+
+#include <asm/hardware/gic.h>
+
+#include <mach/omap-wakeupgen.h>
+#include <mach/omap-secure.h>
+
+#include "omap4-sar-layout.h"
+#include "common.h"
+
+#define NR_REG_BANKS 4
+#define MAX_IRQS 128
+#define WKG_MASK_ALL 0x00000000
+#define WKG_UNMASK_ALL 0xffffffff
+#define CPU_ENA_OFFSET 0x400
+#define CPU0_ID 0x0
+#define CPU1_ID 0x1
+
+static void __iomem *wakeupgen_base;
+static void __iomem *sar_base;
+static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks);
+static DEFINE_SPINLOCK(wakeupgen_lock);
+static unsigned int irq_target_cpu[NR_IRQS];
+
+/*
+ * Static helper functions.
+ */
+static inline u32 wakeupgen_readl(u8 idx, u32 cpu)
+{
+ return __raw_readl(wakeupgen_base + OMAP_WKG_ENB_A_0 +
+ (cpu * CPU_ENA_OFFSET) + (idx * 4));
+}
+
+static inline void wakeupgen_writel(u32 val, u8 idx, u32 cpu)
+{
+ __raw_writel(val, wakeupgen_base + OMAP_WKG_ENB_A_0 +
+ (cpu * CPU_ENA_OFFSET) + (idx * 4));
+}
+
+static inline void sar_writel(u32 val, u32 offset, u8 idx)
+{
+ __raw_writel(val, sar_base + offset + (idx * 4));
+}
+
+static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg)
+{
+ u8 i;
+
+ for (i = 0; i < NR_REG_BANKS; i++)
+ wakeupgen_writel(reg, i, cpu);
+}
+
+static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index)
+{
+ unsigned int spi_irq;
+
+ /*
+ * PPIs and SGIs are not supported.
+ */
+ if (irq < OMAP44XX_IRQ_GIC_START)
+ return -EINVAL;
+
+ /*
+ * Subtract the GIC offset.
+ */
+ spi_irq = irq - OMAP44XX_IRQ_GIC_START;
+ if (spi_irq > MAX_IRQS) {
+ pr_err("omap wakeupGen: Invalid IRQ%d\n", irq);
+ return -EINVAL;
+ }
+
+ /*
+ * Each WakeupGen register controls 32 interrupt.
+ * i.e. 1 bit per SPI IRQ
+ */
+ *reg_index = spi_irq >> 5;
+ *bit_posn = spi_irq %= 32;
+
+ return 0;
+}
+
+static void _wakeupgen_clear(unsigned int irq, unsigned int cpu)
+{
+ u32 val, bit_number;
+ u8 i;
+
+ if (_wakeupgen_get_irq_info(irq, &bit_number, &i))
+ return;
+
+ val = wakeupgen_readl(i, cpu);
+ val &= ~BIT(bit_number);
+ wakeupgen_writel(val, i, cpu);
+}
+
+static void _wakeupgen_set(unsigned int irq, unsigned int cpu)
+{
+ u32 val, bit_number;
+ u8 i;
+
+ if (_wakeupgen_get_irq_info(irq, &bit_number, &i))
+ return;
+
+ val = wakeupgen_readl(i, cpu);
+ val |= BIT(bit_number);
+ wakeupgen_writel(val, i, cpu);
+}
+
+static void _wakeupgen_save_masks(unsigned int cpu)
+{
+ u8 i;
+
+ for (i = 0; i < NR_REG_BANKS; i++)
+ per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu);
+}
+
+static void _wakeupgen_restore_masks(unsigned int cpu)
+{
+ u8 i;
+
+ for (i = 0; i < NR_REG_BANKS; i++)
+ wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu);
+}
+
+/*
+ * Architecture specific Mask extension
+ */
+static void wakeupgen_mask(struct irq_data *d)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wakeupgen_lock, flags);
+ _wakeupgen_clear(d->irq, irq_target_cpu[d->irq]);
+ spin_unlock_irqrestore(&wakeupgen_lock, flags);
+}
+
+/*
+ * Architecture specific Unmask extension
+ */
+static void wakeupgen_unmask(struct irq_data *d)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wakeupgen_lock, flags);
+ _wakeupgen_set(d->irq, irq_target_cpu[d->irq]);
+ spin_unlock_irqrestore(&wakeupgen_lock, flags);
+}
+
+/*
+ * Mask or unmask all interrupts on given CPU.
+ * 0 = Mask all interrupts on the 'cpu'
+ * 1 = Unmask all interrupts on the 'cpu'
+ * Ensure that the initial mask is maintained. This is faster than
+ * iterating through GIC registers to arrive at the correct masks.
+ */
+static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wakeupgen_lock, flags);
+ if (set) {
+ _wakeupgen_save_masks(cpu);
+ _wakeupgen_set_all(cpu, WKG_MASK_ALL);
+ } else {
+ _wakeupgen_set_all(cpu, WKG_UNMASK_ALL);
+ _wakeupgen_restore_masks(cpu);
+ }
+ spin_unlock_irqrestore(&wakeupgen_lock, flags);
+}
+
+#ifdef CONFIG_CPU_PM
+/*
+ * Save WakeupGen interrupt context in SAR BANK3. Restore is done by
+ * ROM code. WakeupGen IP is integrated along with GIC to manage the
+ * interrupt wakeups from CPU low power states. It manages
+ * masking/unmasking of Shared peripheral interrupts(SPI). So the
+ * interrupt enable/disable control should be in sync and consistent
+ * at WakeupGen and GIC so that interrupts are not lost.
+ */
+static void irq_save_context(void)
+{
+ u32 i, val;
+
+ if (omap_rev() == OMAP4430_REV_ES1_0)
+ return;
+
+ if (!sar_base)
+ sar_base = omap4_get_sar_ram_base();
+
+ for (i = 0; i < NR_REG_BANKS; i++) {
+ /* Save the CPUx interrupt mask for IRQ 0 to 127 */
+ val = wakeupgen_readl(i, 0);
+ sar_writel(val, WAKEUPGENENB_OFFSET_CPU0, i);
+ val = wakeupgen_readl(i, 1);
+ sar_writel(val, WAKEUPGENENB_OFFSET_CPU1, i);
+
+ /*
+ * Disable the secure interrupts for CPUx. The restore
+ * code blindly restores secure and non-secure interrupt
+ * masks from SAR RAM. Secure interrupts are not suppose
+ * to be enabled from HLOS. So overwrite the SAR location
+ * so that the secure interrupt remains disabled.
+ */
+ sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU0, i);
+ sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU1, i);
+ }
+
+ /* Save AuxBoot* registers */
+ val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+ __raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
+ val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+ __raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
+
+ /* Save SyncReq generation logic */
+ val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+ __raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
+ val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+ __raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
+
+ /* Save SyncReq generation logic */
+ val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_MASK);
+ __raw_writel(val, sar_base + PTMSYNCREQ_MASK_OFFSET);
+ val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_EN);
+ __raw_writel(val, sar_base + PTMSYNCREQ_EN_OFFSET);
+
+ /* Set the Backup Bit Mask status */
+ val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
+ val |= SAR_BACKUP_STATUS_WAKEUPGEN;
+ __raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
+}
+
+/*
+ * Clear WakeupGen SAR backup status.
+ */
+void irq_sar_clear(void)
+{
+ u32 val;
+ val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
+ val &= ~SAR_BACKUP_STATUS_WAKEUPGEN;
+ __raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
+}
+
+/*
+ * Save GIC and Wakeupgen interrupt context using secure API
+ * for HS/EMU devices.
+ */
+static void irq_save_secure_context(void)
+{
+ u32 ret;
+ ret = omap_secure_dispatcher(OMAP4_HAL_SAVEGIC_INDEX,
+ FLAG_START_CRITICAL,
+ 0, 0, 0, 0, 0);
+ if (ret != API_HAL_RET_VALUE_OK)
+ pr_err("GIC and Wakeupgen context save failed\n");
+}
+#endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+static int __cpuinit irq_cpu_hotplug_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned int)hcpu;
+
+ switch (action) {
+ case CPU_ONLINE:
+ wakeupgen_irqmask_all(cpu, 0);
+ break;
+ case CPU_DEAD:
+ wakeupgen_irqmask_all(cpu, 1);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __refdata irq_hotplug_notifier = {
+ .notifier_call = irq_cpu_hotplug_notify,
+};
+
+static void __init irq_hotplug_init(void)
+{
+ register_hotcpu_notifier(&irq_hotplug_notifier);
+}
+#else
+static void __init irq_hotplug_init(void)
+{}
+#endif
+
+#ifdef CONFIG_CPU_PM
+static int irq_notifier(struct notifier_block *self, unsigned long cmd, void *v)
+{
+ switch (cmd) {
+ case CPU_CLUSTER_PM_ENTER:
+ if (omap_type() == OMAP2_DEVICE_TYPE_GP)
+ irq_save_context();
+ else
+ irq_save_secure_context();
+ break;
+ case CPU_CLUSTER_PM_EXIT:
+ if (omap_type() == OMAP2_DEVICE_TYPE_GP)
+ irq_sar_clear();
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block irq_notifier_block = {
+ .notifier_call = irq_notifier,
+};
+
+static void __init irq_pm_init(void)
+{
+ cpu_pm_register_notifier(&irq_notifier_block);
+}
+#else
+static void __init irq_pm_init(void)
+{}
+#endif
+
+/*
+ * Initialise the wakeupgen module.
+ */
+int __init omap_wakeupgen_init(void)
+{
+ int i;
+ unsigned int boot_cpu = smp_processor_id();
+
+ /* Not supported on OMAP4 ES1.0 silicon */
+ if (omap_rev() == OMAP4430_REV_ES1_0) {
+ WARN(1, "WakeupGen: Not supported on OMAP4430 ES1.0\n");
+ return -EPERM;
+ }
+
+ /* Static mapping, never released */
+ wakeupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
+ if (WARN_ON(!wakeupgen_base))
+ return -ENOMEM;
+
+ /* Clear all IRQ bitmasks at wakeupGen level */
+ for (i = 0; i < NR_REG_BANKS; i++) {
+ wakeupgen_writel(0, i, CPU0_ID);
+ wakeupgen_writel(0, i, CPU1_ID);
+ }
+
+ /*
+ * Override GIC architecture specific functions to add
+ * OMAP WakeupGen interrupt controller along with GIC
+ */
+ gic_arch_extn.irq_mask = wakeupgen_mask;
+ gic_arch_extn.irq_unmask = wakeupgen_unmask;
+ gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
+
+ /*
+ * FIXME: Add support to set_smp_affinity() once the core
+ * GIC code has necessary hooks in place.
+ */
+
+ /* Associate all the IRQs to boot CPU like GIC init does. */
+ for (i = 0; i < NR_IRQS; i++)
+ irq_target_cpu[i] = boot_cpu;
+
+ irq_hotplug_init();
+ irq_pm_init();
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index beecfdd56ea3..bc16c818c6b7 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -15,18 +15,73 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/memblock.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/map.h>
#include <plat/irqs.h>
+#include <plat/sram.h>
#include <mach/hardware.h>
+#include <mach/omap-wakeupgen.h>
#include "common.h"
+#include "omap4-sar-layout.h"
#ifdef CONFIG_CACHE_L2X0
-void __iomem *l2cache_base;
+static void __iomem *l2cache_base;
+#endif
+
+static void __iomem *sar_ram_base;
+
+#ifdef CONFIG_OMAP4_ERRATA_I688
+/* Used to implement memory barrier on DRAM path */
+#define OMAP4_DRAM_BARRIER_VA 0xfe600000
+
+void __iomem *dram_sync, *sram_sync;
+
+void omap_bus_sync(void)
+{
+ if (dram_sync && sram_sync) {
+ writel_relaxed(readl_relaxed(dram_sync), dram_sync);
+ writel_relaxed(readl_relaxed(sram_sync), sram_sync);
+ isb();
+ }
+}
+
+static int __init omap_barriers_init(void)
+{
+ struct map_desc dram_io_desc[1];
+ phys_addr_t paddr;
+ u32 size;
+
+ if (!cpu_is_omap44xx())
+ return -ENODEV;
+
+ size = ALIGN(PAGE_SIZE, SZ_1M);
+ paddr = memblock_alloc(size, SZ_1M);
+ if (!paddr) {
+ pr_err("%s: failed to reserve 4 Kbytes\n", __func__);
+ return -ENOMEM;
+ }
+ memblock_free(paddr, size);
+ memblock_remove(paddr, size);
+ dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
+ dram_io_desc[0].pfn = __phys_to_pfn(paddr);
+ dram_io_desc[0].length = size;
+ dram_io_desc[0].type = MT_MEMORY_SO;
+ iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc));
+ dram_sync = (void __iomem *) dram_io_desc[0].virtual;
+ sram_sync = (void __iomem *) OMAP4_SRAM_VA;
+
+ pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
+ (long long) paddr, dram_io_desc[0].virtual);
+
+ return 0;
+}
+core_initcall(omap_barriers_init);
#endif
void __init gic_init_irq(void)
@@ -42,11 +97,18 @@ void __init gic_init_irq(void)
omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
BUG_ON(!omap_irq_base);
+ omap_wakeupgen_init();
+
gic_init(0, 29, gic_dist_base_addr, omap_irq_base);
}
#ifdef CONFIG_CACHE_L2X0
+void __iomem *omap4_get_l2cache_base(void)
+{
+ return l2cache_base;
+}
+
static void omap4_l2x0_disable(void)
{
/* Disable PL310 L2 Cache controller */
@@ -72,7 +134,8 @@ static int __init omap_l2_cache_init(void)
/* Static mapping, never released */
l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K);
- BUG_ON(!l2cache_base);
+ if (WARN_ON(!l2cache_base))
+ return -ENOMEM;
/*
* 16-way associativity, parity disabled
@@ -112,3 +175,30 @@ static int __init omap_l2_cache_init(void)
}
early_initcall(omap_l2_cache_init);
#endif
+
+void __iomem *omap4_get_sar_ram_base(void)
+{
+ return sar_ram_base;
+}
+
+/*
+ * SAR RAM used to save and restore the HW
+ * context in low power modes
+ */
+static int __init omap4_sar_ram_init(void)
+{
+ /*
+ * To avoid code running on other OMAPs in
+ * multi-omap builds
+ */
+ if (!cpu_is_omap44xx())
+ return -ENOMEM;
+
+ /* Static mapping, never released */
+ sar_ram_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K);
+ if (WARN_ON(!sar_ram_base))
+ return -ENOMEM;
+
+ return 0;
+}
+early_initcall(omap4_sar_ram_init);
diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h
new file mode 100644
index 000000000000..fe5b545ad443
--- /dev/null
+++ b/arch/arm/mach-omap2/omap4-sar-layout.h
@@ -0,0 +1,50 @@
+/*
+ * omap4-sar-layout.h: OMAP4 SAR RAM layout header file
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP_ARCH_OMAP4_SAR_LAYOUT_H
+#define OMAP_ARCH_OMAP4_SAR_LAYOUT_H
+
+/*
+ * SAR BANK offsets from base address OMAP44XX_SAR_RAM_BASE
+ */
+#define SAR_BANK1_OFFSET 0x0000
+#define SAR_BANK2_OFFSET 0x1000
+#define SAR_BANK3_OFFSET 0x2000
+#define SAR_BANK4_OFFSET 0x3000
+
+/* Scratch pad memory offsets from SAR_BANK1 */
+#define SCU_OFFSET0 0xd00
+#define SCU_OFFSET1 0xd04
+#define OMAP_TYPE_OFFSET 0xd10
+#define L2X0_SAVE_OFFSET0 0xd14
+#define L2X0_SAVE_OFFSET1 0xd18
+#define L2X0_AUXCTRL_OFFSET 0xd1c
+#define L2X0_PREFETCH_CTRL_OFFSET 0xd20
+
+/* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */
+#define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04
+#define CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xa08
+
+#define SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x500)
+#define SAR_SECURE_RAM_SIZE_OFFSET (SAR_BANK3_OFFSET + 0x504)
+#define SAR_SECRAM_SAVED_AT_OFFSET (SAR_BANK3_OFFSET + 0x508)
+
+/* WakeUpGen save restore offset from OMAP44XX_SAR_RAM_BASE */
+#define WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x684)
+#define WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x694)
+#define WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x6a4)
+#define WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x6b4)
+#define AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0x6c4)
+#define AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x6c8)
+#define PTMSYNCREQ_MASK_OFFSET (SAR_BANK3_OFFSET + 0x6cc)
+#define PTMSYNCREQ_EN_OFFSET (SAR_BANK3_OFFSET + 0x6d0)
+#define SAR_BACKUP_STATUS_WAKEUPGEN 0x10
+
+#endif
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 373d1f15c4eb..5192cabb40ed 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -136,6 +136,7 @@
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include "common.h"
#include <plat/cpu.h>
@@ -381,6 +382,51 @@ static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
}
/**
+ * _set_idle_ioring_wakeup - enable/disable IO pad wakeup on hwmod idle for mux
+ * @oh: struct omap_hwmod *
+ * @set_wake: bool value indicating to set (true) or clear (false) wakeup enable
+ *
+ * Set or clear the I/O pad wakeup flag in the mux entries for the
+ * hwmod @oh. This function changes the @oh->mux->pads_dynamic array
+ * in memory. If the hwmod is currently idled, and the new idle
+ * values don't match the previous ones, this function will also
+ * update the SCM PADCTRL registers. Otherwise, if the hwmod is not
+ * currently idled, this function won't touch the hardware: the new
+ * mux settings are written to the SCM PADCTRL registers when the
+ * hwmod is idled. No return value.
+ */
+static void _set_idle_ioring_wakeup(struct omap_hwmod *oh, bool set_wake)
+{
+ struct omap_device_pad *pad;
+ bool change = false;
+ u16 prev_idle;
+ int j;
+
+ if (!oh->mux || !oh->mux->enabled)
+ return;
+
+ for (j = 0; j < oh->mux->nr_pads_dynamic; j++) {
+ pad = oh->mux->pads_dynamic[j];
+
+ if (!(pad->flags & OMAP_DEVICE_PAD_WAKEUP))
+ continue;
+
+ prev_idle = pad->idle;
+
+ if (set_wake)
+ pad->idle |= OMAP_WAKEUP_EN;
+ else
+ pad->idle &= ~OMAP_WAKEUP_EN;
+
+ if (prev_idle != pad->idle)
+ change = true;
+ }
+
+ if (change && oh->_state == _HWMOD_STATE_IDLE)
+ omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
+}
+
+/**
* _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
* @oh: struct omap_hwmod *
*
@@ -1449,6 +1495,25 @@ static int _enable(struct omap_hwmod *oh)
pr_debug("omap_hwmod: %s: enabling\n", oh->name);
+ /*
+ * hwmods with HWMOD_INIT_NO_IDLE flag set are left
+ * in enabled state at init.
+ * Now that someone is really trying to enable them,
+ * just ensure that the hwmod mux is set.
+ */
+ if (oh->_int_flags & _HWMOD_SKIP_ENABLE) {
+ /*
+ * If the caller has mux data populated, do the mux'ing
+ * which wouldn't have been done as part of the _enable()
+ * done during setup.
+ */
+ if (oh->mux)
+ omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
+
+ oh->_int_flags &= ~_HWMOD_SKIP_ENABLE;
+ return 0;
+ }
+
if (oh->_state != _HWMOD_STATE_INITIALIZED &&
oh->_state != _HWMOD_STATE_IDLE &&
oh->_state != _HWMOD_STATE_DISABLED) {
@@ -1744,8 +1809,10 @@ static int _setup(struct omap_hwmod *oh, void *data)
* it should be set by the core code as a runtime flag during startup
*/
if ((oh->flags & HWMOD_INIT_NO_IDLE) &&
- (postsetup_state == _HWMOD_STATE_IDLE))
+ (postsetup_state == _HWMOD_STATE_IDLE)) {
+ oh->_int_flags |= _HWMOD_SKIP_ENABLE;
postsetup_state = _HWMOD_STATE_ENABLED;
+ }
if (postsetup_state == _HWMOD_STATE_IDLE)
_idle(oh);
@@ -2416,6 +2483,7 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
v = oh->_sysc_cache;
_enable_wakeup(oh, &v);
_write_sysconfig(v, oh);
+ _set_idle_ioring_wakeup(oh, true);
spin_unlock_irqrestore(&oh->_lock, flags);
return 0;
@@ -2446,6 +2514,7 @@ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
v = oh->_sysc_cache;
_disable_wakeup(oh, &v);
_write_sysconfig(v, oh);
+ _set_idle_ioring_wakeup(oh, false);
spin_unlock_irqrestore(&oh->_lock, flags);
return 0;
@@ -2662,3 +2731,57 @@ int omap_hwmod_no_setup_reset(struct omap_hwmod *oh)
return 0;
}
+
+/**
+ * omap_hwmod_pad_route_irq - route an I/O pad wakeup to a particular MPU IRQ
+ * @oh: struct omap_hwmod * containing hwmod mux entries
+ * @pad_idx: array index in oh->mux of the hwmod mux entry to route wakeup
+ * @irq_idx: the hwmod mpu_irqs array index of the IRQ to trigger on wakeup
+ *
+ * When an I/O pad wakeup arrives for the dynamic or wakeup hwmod mux
+ * entry number @pad_idx for the hwmod @oh, trigger the interrupt
+ * service routine for the hwmod's mpu_irqs array index @irq_idx. If
+ * this function is not called for a given pad_idx, then the ISR
+ * associated with @oh's first MPU IRQ will be triggered when an I/O
+ * pad wakeup occurs on that pad. Note that @pad_idx is the index of
+ * the _dynamic or wakeup_ entry: if there are other entries not
+ * marked with OMAP_DEVICE_PAD_WAKEUP or OMAP_DEVICE_PAD_REMUX, these
+ * entries are NOT COUNTED in the dynamic pad index. This function
+ * must be called separately for each pad that requires its interrupt
+ * to be re-routed this way. Returns -EINVAL if there is an argument
+ * problem or if @oh does not have hwmod mux entries or MPU IRQs;
+ * returns -ENOMEM if memory cannot be allocated; or 0 upon success.
+ *
+ * XXX This function interface is fragile. Rather than using array
+ * indexes, which are subject to unpredictable change, it should be
+ * using hwmod IRQ names, and some other stable key for the hwmod mux
+ * pad records.
+ */
+int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx)
+{
+ int nr_irqs;
+
+ might_sleep();
+
+ if (!oh || !oh->mux || !oh->mpu_irqs || pad_idx < 0 ||
+ pad_idx >= oh->mux->nr_pads_dynamic)
+ return -EINVAL;
+
+ /* Check the number of available mpu_irqs */
+ for (nr_irqs = 0; oh->mpu_irqs[nr_irqs].irq >= 0; nr_irqs++)
+ ;
+
+ if (irq_idx >= nr_irqs)
+ return -EINVAL;
+
+ if (!oh->mux->irqs) {
+ /* XXX What frees this? */
+ oh->mux->irqs = kzalloc(sizeof(int) * oh->mux->nr_pads_dynamic,
+ GFP_KERNEL);
+ if (!oh->mux->irqs)
+ return -ENOMEM;
+ }
+ oh->mux->irqs[pad_idx] = irq_idx;
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 4e166add2f35..b737b11e4499 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -21,6 +21,7 @@ extern void omap_sram_idle(void);
extern int omap3_can_sleep(void);
extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
extern int omap3_idle_init(void);
+extern int omap4_idle_init(void);
#if defined(CONFIG_PM_OPP)
extern int omap3_opp_init(void);
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index ef8595c80296..b8822f8b2891 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -30,7 +30,6 @@
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/gpio.h>
-#include <linux/console.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
@@ -127,27 +126,11 @@ static void omap2_enter_full_retention(void)
if (omap_irq_pending())
goto no_sleep;
- /* Block console output in case it is on one of the OMAP UARTs */
- if (!is_suspending())
- if (!console_trylock())
- goto no_sleep;
-
- omap_uart_prepare_idle(0);
- omap_uart_prepare_idle(1);
- omap_uart_prepare_idle(2);
-
/* Jump to SRAM suspend code */
omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
OMAP_SDRC_REGADDR(SDRC_POWER));
- omap_uart_resume_idle(2);
- omap_uart_resume_idle(1);
- omap_uart_resume_idle(0);
-
- if (!is_suspending())
- console_unlock();
-
no_sleep:
omap2_gpio_resume_after_idle();
@@ -239,8 +222,6 @@ static int omap2_can_sleep(void)
{
if (omap2_fclks_active())
return 0;
- if (!omap_uart_can_sleep())
- return 0;
if (osc_ck->usecount > 1)
return 0;
if (omap_dma_running())
@@ -291,7 +272,6 @@ static int omap2_pm_suspend(void)
mir1 = omap_readl(0x480fe0a4);
omap_writel(1 << 5, 0x480fe0ac);
- omap_uart_prepare_suspend();
omap2_enter_full_retention();
omap_writel(mir1, 0x480fe0a4);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index fa637dfdda53..fc6987578920 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -28,7 +28,6 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/console.h>
#include <trace/events/power.h>
#include <asm/suspend.h>
@@ -36,7 +35,6 @@
#include <plat/sram.h>
#include "clockdomain.h"
#include "powerdomain.h"
-#include <plat/serial.h>
#include <plat/sdrc.h>
#include <plat/prcm.h>
#include <plat/gpmc.h>
@@ -54,15 +52,6 @@
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state = PM_SUSPEND_ON;
-static inline bool is_suspending(void)
-{
- return (suspend_state != PM_SUSPEND_ON) && console_suspend_enabled;
-}
-#else
-static inline bool is_suspending(void)
-{
- return false;
-}
#endif
/* pm34xx errata defined in pm.h */
@@ -195,7 +184,7 @@ static void omap3_save_secure_ram_context(void)
* that any peripheral wake-up events occurring while attempting to
* clear the PM_WKST_x are detected and cleared.
*/
-static int prcm_clear_mod_irqs(s16 module, u8 regs)
+static int prcm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
{
u32 wkst, fclk, iclk, clken;
u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
@@ -207,6 +196,7 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs)
wkst = omap2_prm_read_mod_reg(module, wkst_off);
wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
+ wkst &= ~ignore_bits;
if (wkst) {
iclk = omap2_cm_read_mod_reg(module, iclk_off);
fclk = omap2_cm_read_mod_reg(module, fclk_off);
@@ -222,6 +212,7 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs)
omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
omap2_prm_write_mod_reg(wkst, module, wkst_off);
wkst = omap2_prm_read_mod_reg(module, wkst_off);
+ wkst &= ~ignore_bits;
c++;
}
omap2_cm_write_mod_reg(iclk, module, iclk_off);
@@ -231,76 +222,35 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs)
return c;
}
-static int _prcm_int_handle_wakeup(void)
+static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
{
int c;
- c = prcm_clear_mod_irqs(WKUP_MOD, 1);
- c += prcm_clear_mod_irqs(CORE_MOD, 1);
- c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1);
- if (omap_rev() > OMAP3430_REV_ES1_0) {
- c += prcm_clear_mod_irqs(CORE_MOD, 3);
- c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1);
- }
+ c = prcm_clear_mod_irqs(WKUP_MOD, 1,
+ ~(OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK));
- return c;
+ return c ? IRQ_HANDLED : IRQ_NONE;
}
-/*
- * PRCM Interrupt Handler
- *
- * The PRM_IRQSTATUS_MPU register indicates if there are any pending
- * interrupts from the PRCM for the MPU. These bits must be cleared in
- * order to clear the PRCM interrupt. The PRCM interrupt handler is
- * implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear
- * the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU
- * register indicates that a wake-up event is pending for the MPU and
- * this bit can only be cleared if the all the wake-up events latched
- * in the various PM_WKST_x registers have been cleared. The interrupt
- * handler is implemented using a do-while loop so that if a wake-up
- * event occurred during the processing of the prcm interrupt handler
- * (setting a bit in the corresponding PM_WKST_x register and thus
- * preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register)
- * this would be handled.
- */
-static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
{
- u32 irqenable_mpu, irqstatus_mpu;
- int c = 0;
-
- irqenable_mpu = omap2_prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQENABLE_MPU_OFFSET);
- irqstatus_mpu = omap2_prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- irqstatus_mpu &= irqenable_mpu;
-
- do {
- if (irqstatus_mpu & (OMAP3430_WKUP_ST_MASK |
- OMAP3430_IO_ST_MASK)) {
- c = _prcm_int_handle_wakeup();
-
- /*
- * Is the MPU PRCM interrupt handler racing with the
- * IVA2 PRCM interrupt handler ?
- */
- WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup "
- "but no wakeup sources are marked\n");
- } else {
- /* XXX we need to expand our PRCM interrupt handler */
- WARN(1, "prcm: WARNING: PRCM interrupt received, but "
- "no code to handle it (%08x)\n", irqstatus_mpu);
- }
-
- omap2_prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-
- irqstatus_mpu = omap2_prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- irqstatus_mpu &= irqenable_mpu;
+ int c;
- } while (irqstatus_mpu);
+ /*
+ * Clear all except ST_IO and ST_IO_CHAIN for wkup module,
+ * these are handled in a separate handler to avoid acking
+ * IO events before parsing in mux code
+ */
+ c = prcm_clear_mod_irqs(WKUP_MOD, 1,
+ OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK);
+ c += prcm_clear_mod_irqs(CORE_MOD, 1, 0);
+ c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ c += prcm_clear_mod_irqs(CORE_MOD, 3, 0);
+ c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
+ }
- return IRQ_HANDLED;
+ return c ? IRQ_HANDLED : IRQ_NONE;
}
static void omap34xx_save_context(u32 *save)
@@ -376,20 +326,11 @@ void omap_sram_idle(void)
omap3_enable_io_chain();
}
- /* Block console output in case it is on one of the OMAP UARTs */
- if (!is_suspending())
- if (per_next_state < PWRDM_POWER_ON ||
- core_next_state < PWRDM_POWER_ON)
- if (!console_trylock())
- goto console_still_active;
-
pwrdm_pre_transition();
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
- omap_uart_prepare_idle(2);
- omap_uart_prepare_idle(3);
omap2_gpio_prepare_for_idle(per_going_off);
if (per_next_state == PWRDM_POWER_OFF)
omap3_per_save_context();
@@ -397,8 +338,6 @@ void omap_sram_idle(void)
/* CORE */
if (core_next_state < PWRDM_POWER_ON) {
- omap_uart_prepare_idle(0);
- omap_uart_prepare_idle(1);
if (core_next_state == PWRDM_POWER_OFF) {
omap3_core_save_context();
omap3_cm_save_context();
@@ -447,8 +386,6 @@ void omap_sram_idle(void)
omap3_sram_restore_context();
omap2_sms_restore_context();
}
- omap_uart_resume_idle(0);
- omap_uart_resume_idle(1);
if (core_next_state == PWRDM_POWER_OFF)
omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
OMAP3430_GR_MOD,
@@ -464,14 +401,8 @@ void omap_sram_idle(void)
omap2_gpio_resume_after_idle();
if (per_prev_state == PWRDM_POWER_OFF)
omap3_per_restore_context();
- omap_uart_resume_idle(2);
- omap_uart_resume_idle(3);
}
- if (!is_suspending())
- console_unlock();
-
-console_still_active:
/* Disable IO-PAD and IO-CHAIN wakeup */
if (omap3_has_io_wakeup() &&
(per_next_state < PWRDM_POWER_ON ||
@@ -485,21 +416,11 @@ console_still_active:
clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
}
-int omap3_can_sleep(void)
-{
- if (!omap_uart_can_sleep())
- return 0;
- return 1;
-}
-
static void omap3_pm_idle(void)
{
local_irq_disable();
local_fiq_disable();
- if (!omap3_can_sleep())
- goto out;
-
if (omap_irq_pending() || need_resched())
goto out;
@@ -533,7 +454,6 @@ static int omap3_pm_suspend(void)
goto restore;
}
- omap_uart_prepare_suspend();
omap3_intc_suspend();
omap_sram_idle();
@@ -580,22 +500,27 @@ static int omap3_pm_begin(suspend_state_t state)
{
disable_hlt();
suspend_state = state;
- omap_uart_enable_irqs(0);
+ omap_prcm_irq_prepare();
return 0;
}
static void omap3_pm_end(void)
{
suspend_state = PM_SUSPEND_ON;
- omap_uart_enable_irqs(1);
enable_hlt();
return;
}
+static void omap3_pm_finish(void)
+{
+ omap_prcm_irq_complete();
+}
+
static const struct platform_suspend_ops omap_pm_ops = {
.begin = omap3_pm_begin,
.end = omap3_pm_end,
.enter = omap3_pm_enter,
+ .finish = omap3_pm_finish,
.valid = suspend_valid_only_mem,
};
#endif /* CONFIG_SUSPEND */
@@ -701,10 +626,6 @@ static void __init prcm_setup_regs(void)
OMAP3430_GRPSEL_GPT1_MASK |
OMAP3430_GRPSEL_GPT12_MASK,
WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
- /* For some reason IO doesn't generate wakeup event even if
- * it is selected to mpu wakeup goup */
- omap2_prm_write_mod_reg(OMAP3430_IO_EN_MASK | OMAP3430_WKUP_EN_MASK,
- OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
/* Enable PM_WKEN to support DSS LPR */
omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
@@ -881,12 +802,21 @@ static int __init omap3_pm_init(void)
* supervised mode for powerdomains */
prcm_setup_regs();
- ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
- (irq_handler_t)prcm_interrupt_handler,
- IRQF_DISABLED, "prcm", NULL);
+ ret = request_irq(omap_prcm_event_to_irq("wkup"),
+ _prcm_int_handle_wakeup, IRQF_NO_SUSPEND, "pm_wkup", NULL);
+
+ if (ret) {
+ pr_err("pm: Failed to request pm_wkup irq\n");
+ goto err1;
+ }
+
+ /* IO interrupt is shared with mux code */
+ ret = request_irq(omap_prcm_event_to_irq("io"),
+ _prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
+ omap3_pm_init);
+
if (ret) {
- printk(KERN_ERR "request_irq failed to register for 0x%x\n",
- INT_34XX_PRCM_MPU_IRQ);
+ pr_err("pm: Failed to request pm_io irq\n");
goto err1;
}
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 8edb015f5618..c264ef7219c1 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -1,8 +1,9 @@
/*
* OMAP4 Power Management Routines
*
- * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010-2011 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -17,13 +18,16 @@
#include <linux/slab.h>
#include "common.h"
+#include "clockdomain.h"
#include "powerdomain.h"
+#include "pm.h"
struct power_state {
struct powerdomain *pwrdm;
u32 next_state;
#ifdef CONFIG_SUSPEND
u32 saved_state;
+ u32 saved_logic_state;
#endif
struct list_head node;
};
@@ -33,7 +37,50 @@ static LIST_HEAD(pwrst_list);
#ifdef CONFIG_SUSPEND
static int omap4_pm_suspend(void)
{
- do_wfi();
+ struct power_state *pwrst;
+ int state, ret = 0;
+ u32 cpu_id = smp_processor_id();
+
+ /* Save current powerdomain state */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
+ pwrst->saved_logic_state = pwrdm_read_logic_retst(pwrst->pwrdm);
+ }
+
+ /* Set targeted power domain states by suspend */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+ pwrdm_set_logic_retst(pwrst->pwrdm, PWRDM_POWER_OFF);
+ }
+
+ /*
+ * For MPUSS to hit power domain retention(CSWR or OSWR),
+ * CPU0 and CPU1 power domains need to be in OFF or DORMANT state,
+ * since CPU power domain CSWR is not supported by hardware
+ * Only master CPU follows suspend path. All other CPUs follow
+ * CPU hotplug path in system wide suspend. On OMAP4, CPU power
+ * domain CSWR is not supported by hardware.
+ * More details can be found in OMAP4430 TRM section 4.3.4.2.
+ */
+ omap4_enter_lowpower(cpu_id, PWRDM_POWER_OFF);
+
+ /* Restore next powerdomain state */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
+ if (state > pwrst->next_state) {
+ pr_info("Powerdomain (%s) didn't enter "
+ "target state %d\n",
+ pwrst->pwrdm->name, pwrst->next_state);
+ ret = -1;
+ }
+ omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+ pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->saved_logic_state);
+ }
+ if (ret)
+ pr_crit("Could not enter target state in pm_suspend\n");
+ else
+ pr_info("Successfully put all powerdomains to target state\n");
+
return 0;
}
@@ -73,6 +120,22 @@ static const struct platform_suspend_ops omap_pm_ops = {
};
#endif /* CONFIG_SUSPEND */
+/*
+ * Enable hardware supervised mode for all clockdomains if it's
+ * supported. Initiate sleep transition for other clockdomains, if
+ * they are not used
+ */
+static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
+{
+ if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+ clkdm_allow_idle(clkdm);
+ else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
+ atomic_read(&clkdm->usecount) == 0)
+ clkdm_sleep(clkdm);
+ return 0;
+}
+
+
static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
{
struct power_state *pwrst;
@@ -80,14 +143,48 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
if (!pwrdm->pwrsts)
return 0;
+ /*
+ * Skip CPU0 and CPU1 power domains. CPU1 is programmed
+ * through hotplug path and CPU0 explicitly programmed
+ * further down in the code path
+ */
+ if (!strncmp(pwrdm->name, "cpu", 3))
+ return 0;
+
+ /*
+ * FIXME: Remove this check when core retention is supported
+ * Only MPUSS power domain is added in the list.
+ */
+ if (strcmp(pwrdm->name, "mpu_pwrdm"))
+ return 0;
+
pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
if (!pwrst)
return -ENOMEM;
+
pwrst->pwrdm = pwrdm;
- pwrst->next_state = PWRDM_POWER_ON;
+ pwrst->next_state = PWRDM_POWER_RET;
list_add(&pwrst->node, &pwrst_list);
- return pwrdm_set_next_pwrst(pwrst->pwrdm, pwrst->next_state);
+ return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+}
+
+/**
+ * omap_default_idle - OMAP4 default ilde routine.'
+ *
+ * Implements OMAP4 memory, IO ordering requirements which can't be addressed
+ * with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
+ * by secondary CPU with CONFIG_CPUIDLE.
+ */
+static void omap_default_idle(void)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ omap_do_wfi();
+
+ local_fiq_enable();
+ local_irq_enable();
}
/**
@@ -99,10 +196,17 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
static int __init omap4_pm_init(void)
{
int ret;
+ struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm;
+ struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm;
if (!cpu_is_omap44xx())
return -ENODEV;
+ if (omap_rev() == OMAP4430_REV_ES1_0) {
+ WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
+ return -ENODEV;
+ }
+
pr_err("Power Management for TI OMAP4.\n");
ret = pwrdm_for_each(pwrdms_setup, NULL);
@@ -111,10 +215,51 @@ static int __init omap4_pm_init(void)
goto err2;
}
+ /*
+ * The dynamic dependency between MPUSS -> MEMIF and
+ * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
+ * expected. The hardware recommendation is to enable static
+ * dependencies for these to avoid system lock ups or random crashes.
+ */
+ mpuss_clkdm = clkdm_lookup("mpuss_clkdm");
+ emif_clkdm = clkdm_lookup("l3_emif_clkdm");
+ l3_1_clkdm = clkdm_lookup("l3_1_clkdm");
+ l3_2_clkdm = clkdm_lookup("l3_2_clkdm");
+ l4_per_clkdm = clkdm_lookup("l4_per_clkdm");
+ ducati_clkdm = clkdm_lookup("ducati_clkdm");
+ if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) ||
+ (!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm))
+ goto err2;
+
+ ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm);
+ ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm);
+ ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm);
+ ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm);
+ ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
+ ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
+ if (ret) {
+ pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 "
+ "wakeup dependency\n");
+ goto err2;
+ }
+
+ ret = omap4_mpuss_init();
+ if (ret) {
+ pr_err("Failed to initialise OMAP4 MPUSS\n");
+ goto err2;
+ }
+
+ (void) clkdm_for_each(clkdms_setup, NULL);
+
#ifdef CONFIG_SUSPEND
suspend_set_ops(&omap_pm_ops);
#endif /* CONFIG_SUSPEND */
+ /* Overwrite the default arch_idle() */
+ pm_idle = omap_default_idle;
+
+ omap4_idle_init();
+
err2:
return ret;
}
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index da2d80f5fcbd..5aa5435e3ff1 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -4,7 +4,7 @@
/*
* OMAP2/3 PRCM base and module definitions
*
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
@@ -410,6 +410,79 @@
extern void __iomem *prm_base;
extern void __iomem *cm_base;
extern void __iomem *cm2_base;
+
+/**
+ * struct omap_prcm_irq - describes a PRCM interrupt bit
+ * @name: a short name describing the interrupt type, e.g. "wkup" or "io"
+ * @offset: the bit shift of the interrupt inside the IRQ{ENABLE,STATUS} regs
+ * @priority: should this interrupt be handled before @priority=false IRQs?
+ *
+ * Describes interrupt bits inside the PRM_IRQ{ENABLE,STATUS}_MPU* registers.
+ * On systems with multiple PRM MPU IRQ registers, the bitfields read from
+ * the registers are concatenated, so @offset could be > 31 on these systems -
+ * see omap_prm_irq_handler() for more details. I/O ring interrupts should
+ * have @priority set to true.
+ */
+struct omap_prcm_irq {
+ const char *name;
+ unsigned int offset;
+ bool priority;
+};
+
+/**
+ * struct omap_prcm_irq_setup - PRCM interrupt controller details
+ * @ack: PRM register offset for the first PRM_IRQSTATUS_MPU register
+ * @mask: PRM register offset for the first PRM_IRQENABLE_MPU register
+ * @nr_regs: number of PRM_IRQ{STATUS,ENABLE}_MPU* registers
+ * @nr_irqs: number of entries in the @irqs array
+ * @irqs: ptr to an array of PRCM interrupt bits (see @nr_irqs)
+ * @irq: MPU IRQ asserted when a PRCM interrupt arrives
+ * @read_pending_irqs: fn ptr to determine if any PRCM IRQs are pending
+ * @ocp_barrier: fn ptr to force buffered PRM writes to complete
+ * @save_and_clear_irqen: fn ptr to save and clear IRQENABLE regs
+ * @restore_irqen: fn ptr to save and clear IRQENABLE regs
+ * @saved_mask: IRQENABLE regs are saved here during suspend
+ * @priority_mask: 1 bit per IRQ, set to 1 if omap_prcm_irq.priority = true
+ * @base_irq: base dynamic IRQ number, returned from irq_alloc_descs() in init
+ * @suspended: set to true after Linux suspend code has called our ->prepare()
+ * @suspend_save_flag: set to true after IRQ masks have been saved and disabled
+ *
+ * @saved_mask, @priority_mask, @base_irq, @suspended, and
+ * @suspend_save_flag are populated dynamically, and are not to be
+ * specified in static initializers.
+ */
+struct omap_prcm_irq_setup {
+ u16 ack;
+ u16 mask;
+ u8 nr_regs;
+ u8 nr_irqs;
+ const struct omap_prcm_irq *irqs;
+ int irq;
+ void (*read_pending_irqs)(unsigned long *events);
+ void (*ocp_barrier)(void);
+ void (*save_and_clear_irqen)(u32 *saved_mask);
+ void (*restore_irqen)(u32 *saved_mask);
+ u32 *saved_mask;
+ u32 *priority_mask;
+ int base_irq;
+ bool suspended;
+ bool suspend_save_flag;
+};
+
+/* OMAP_PRCM_IRQ: convenience macro for creating struct omap_prcm_irq records */
+#define OMAP_PRCM_IRQ(_name, _offset, _priority) { \
+ .name = _name, \
+ .offset = _offset, \
+ .priority = _priority \
+ }
+
+extern void omap_prcm_irq_cleanup(void);
+extern int omap_prcm_register_chain_handler(
+ struct omap_prcm_irq_setup *irq_setup);
+extern int omap_prcm_event_to_irq(const char *event);
+extern void omap_prcm_irq_prepare(void);
+extern void omap_prcm_irq_complete(void);
+
# endif
#endif
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 9a08ba397327..c1c4d86a79a8 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -1,7 +1,7 @@
/*
* OMAP2/3 PRM module functions
*
- * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010-2011 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
* Benoît Cousson
* Paul Walmsley
@@ -27,6 +27,24 @@
#include "prm-regbits-24xx.h"
#include "prm-regbits-34xx.h"
+static const struct omap_prcm_irq omap3_prcm_irqs[] = {
+ OMAP_PRCM_IRQ("wkup", 0, 0),
+ OMAP_PRCM_IRQ("io", 9, 1),
+};
+
+static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
+ .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
+ .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET,
+ .nr_regs = 1,
+ .irqs = omap3_prcm_irqs,
+ .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
+ .irq = INT_34XX_PRCM_MPU_IRQ,
+ .read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
+ .ocp_barrier = &omap3xxx_prm_ocp_barrier,
+ .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
+ .restore_irqen = &omap3xxx_prm_restore_irqen,
+};
+
u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
{
return __raw_readl(prm_base + module + idx);
@@ -212,3 +230,80 @@ u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
{
return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
}
+
+/**
+ * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
+ * @events: ptr to a u32, preallocated by caller
+ *
+ * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
+ * MPU IRQs, and store the result into the u32 pointed to by @events.
+ * No return value.
+ */
+void omap3xxx_prm_read_pending_irqs(unsigned long *events)
+{
+ u32 mask, st;
+
+ /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
+ mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ events[0] = mask & st;
+}
+
+/**
+ * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
+ *
+ * Force any buffered writes to the PRM IP block to complete. Needed
+ * by the PRM IRQ handler, which reads and writes directly to the IP
+ * block, to avoid race conditions after acknowledging or clearing IRQ
+ * bits. No return value.
+ */
+void omap3xxx_prm_ocp_barrier(void)
+{
+ omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
+ * @saved_mask: ptr to a u32 array to save IRQENABLE bits
+ *
+ * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask
+ * must be allocated by the caller. Intended to be used in the PRM
+ * interrupt handler suspend callback. The OCP barrier is needed to
+ * ensure the write to disable PRM interrupts reaches the PRM before
+ * returning; otherwise, spurious interrupts might occur. No return
+ * value.
+ */
+void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
+{
+ saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+
+ /* OCP barrier */
+ omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
+ * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
+ *
+ * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended
+ * to be used in the PRM interrupt handler resume callback to restore
+ * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP
+ * barrier should be needed here; any pending PRM interrupts will fire
+ * once the writes reach the PRM. No return value.
+ */
+void omap3xxx_prm_restore_irqen(u32 *saved_mask)
+{
+ omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
+ OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+}
+
+static int __init omap3xxx_prcm_init(void)
+{
+ if (cpu_is_omap34xx())
+ return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
+ return 0;
+}
+subsys_initcall(omap3xxx_prcm_init);
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index cef533df0861..70ac2a19dc5f 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -1,7 +1,7 @@
/*
* OMAP2/3 Power/Reset Management (PRM) register definitions
*
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
* Paul Walmsley
*
@@ -314,6 +314,13 @@ void omap3_prm_vp_clear_txdone(u8 vp_id);
extern u32 omap3_prm_vcvp_read(u8 offset);
extern void omap3_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
+
+/* PRM interrupt-related functions */
+extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
+extern void omap3xxx_prm_ocp_barrier(void);
+extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
+extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
+
#endif /* CONFIG_ARCH_OMAP4 */
#endif
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index dd885eecf22a..33dd655e6aab 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -27,6 +27,24 @@
#include "prcm44xx.h"
#include "prminst44xx.h"
+static const struct omap_prcm_irq omap4_prcm_irqs[] = {
+ OMAP_PRCM_IRQ("wkup", 0, 0),
+ OMAP_PRCM_IRQ("io", 9, 1),
+};
+
+static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
+ .ack = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
+ .mask = OMAP4_PRM_IRQENABLE_MPU_OFFSET,
+ .nr_regs = 2,
+ .irqs = omap4_prcm_irqs,
+ .nr_irqs = ARRAY_SIZE(omap4_prcm_irqs),
+ .irq = OMAP44XX_IRQ_PRCM,
+ .read_pending_irqs = &omap44xx_prm_read_pending_irqs,
+ .ocp_barrier = &omap44xx_prm_ocp_barrier,
+ .save_and_clear_irqen = &omap44xx_prm_save_and_clear_irqen,
+ .restore_irqen = &omap44xx_prm_restore_irqen,
+};
+
/* PRM low-level functions */
/* Read a register in a CM/PRM instance in the PRM module */
@@ -121,3 +139,101 @@ u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
OMAP4430_PRM_DEVICE_INST,
offset);
}
+
+static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs)
+{
+ u32 mask, st;
+
+ /* XXX read mask from RAM? */
+ mask = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqen_offs);
+ st = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqst_offs);
+
+ return mask & st;
+}
+
+/**
+ * omap44xx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
+ * @events: ptr to two consecutive u32s, preallocated by caller
+ *
+ * Read PRM_IRQSTATUS_MPU* bits, AND'ed with the currently-enabled PRM
+ * MPU IRQs, and store the result into the two u32s pointed to by @events.
+ * No return value.
+ */
+void omap44xx_prm_read_pending_irqs(unsigned long *events)
+{
+ events[0] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_OFFSET,
+ OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
+
+ events[1] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_2_OFFSET,
+ OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
+}
+
+/**
+ * omap44xx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
+ *
+ * Force any buffered writes to the PRM IP block to complete. Needed
+ * by the PRM IRQ handler, which reads and writes directly to the IP
+ * block, to avoid race conditions after acknowledging or clearing IRQ
+ * bits. No return value.
+ */
+void omap44xx_prm_ocp_barrier(void)
+{
+ omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+ OMAP4_REVISION_PRM_OFFSET);
+}
+
+/**
+ * omap44xx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU* regs
+ * @saved_mask: ptr to a u32 array to save IRQENABLE bits
+ *
+ * Save the PRM_IRQENABLE_MPU and PRM_IRQENABLE_MPU_2 registers to
+ * @saved_mask. @saved_mask must be allocated by the caller.
+ * Intended to be used in the PRM interrupt handler suspend callback.
+ * The OCP barrier is needed to ensure the write to disable PRM
+ * interrupts reaches the PRM before returning; otherwise, spurious
+ * interrupts might occur. No return value.
+ */
+void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
+{
+ saved_mask[0] =
+ omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
+ saved_mask[1] =
+ omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
+
+ omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IRQENABLE_MPU_OFFSET);
+ omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
+
+ /* OCP barrier */
+ omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+ OMAP4_REVISION_PRM_OFFSET);
+}
+
+/**
+ * omap44xx_prm_restore_irqen - set PRM_IRQENABLE_MPU* registers from args
+ * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
+ *
+ * Restore the PRM_IRQENABLE_MPU and PRM_IRQENABLE_MPU_2 registers from
+ * @saved_mask. Intended to be used in the PRM interrupt handler resume
+ * callback to restore values saved by omap44xx_prm_save_and_clear_irqen().
+ * No OCP barrier should be needed here; any pending PRM interrupts will fire
+ * once the writes reach the PRM. No return value.
+ */
+void omap44xx_prm_restore_irqen(u32 *saved_mask)
+{
+ omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IRQENABLE_MPU_OFFSET);
+ omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
+}
+
+static int __init omap4xxx_prcm_init(void)
+{
+ if (cpu_is_omap44xx())
+ return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+ return 0;
+}
+subsys_initcall(omap4xxx_prcm_init);
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 3d66ccd849d2..7978092946db 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -1,7 +1,7 @@
/*
* OMAP44xx PRM instance offset macros
*
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Texas Instruments, Inc.
* Copyright (C) 2009-2010 Nokia Corporation
*
* Paul Walmsley (paul@pwsan.com)
@@ -763,6 +763,12 @@ extern u32 omap4_prm_vcvp_read(u8 offset);
extern void omap4_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
+/* PRM interrupt-related functions */
+extern void omap44xx_prm_read_pending_irqs(unsigned long *events);
+extern void omap44xx_prm_ocp_barrier(void);
+extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
+extern void omap44xx_prm_restore_irqen(u32 *saved_mask);
+
# endif
#endif
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
new file mode 100644
index 000000000000..860118ab43e2
--- /dev/null
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -0,0 +1,320 @@
+/*
+ * OMAP2+ common Power & Reset Management (PRM) IP block functions
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * For historical purposes, the API used to configure the PRM
+ * interrupt handler refers to it as the "PRCM interrupt." The
+ * underlying registers are located in the PRM on OMAP3/4.
+ *
+ * XXX This code should eventually be moved to a PRM driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+#include <mach/system.h>
+#include <plat/common.h>
+#include <plat/prcm.h>
+#include <plat/irqs.h>
+
+#include "prm2xxx_3xxx.h"
+#include "prm44xx.h"
+
+/*
+ * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
+ * XXX this is technically not needed, since
+ * omap_prcm_register_chain_handler() could allocate this based on the
+ * actual amount of memory needed for the SoC
+ */
+#define OMAP_PRCM_MAX_NR_PENDING_REG 2
+
+/*
+ * prcm_irq_chips: an array of all of the "generic IRQ chips" in use
+ * by the PRCM interrupt handler code. There will be one 'chip' per
+ * PRM_{IRQSTATUS,IRQENABLE}_MPU register pair. (So OMAP3 will have
+ * one "chip" and OMAP4 will have two.)
+ */
+static struct irq_chip_generic **prcm_irq_chips;
+
+/*
+ * prcm_irq_setup: the PRCM IRQ parameters for the hardware the code
+ * is currently running on. Defined and passed by initialization code
+ * that calls omap_prcm_register_chain_handler().
+ */
+static struct omap_prcm_irq_setup *prcm_irq_setup;
+
+/* Private functions */
+
+/*
+ * Move priority events from events to priority_events array
+ */
+static void omap_prcm_events_filter_priority(unsigned long *events,
+ unsigned long *priority_events)
+{
+ int i;
+
+ for (i = 0; i < prcm_irq_setup->nr_regs; i++) {
+ priority_events[i] =
+ events[i] & prcm_irq_setup->priority_mask[i];
+ events[i] ^= priority_events[i];
+ }
+}
+
+/*
+ * PRCM Interrupt Handler
+ *
+ * This is a common handler for the OMAP PRCM interrupts. Pending
+ * interrupts are detected by a call to prcm_pending_events and
+ * dispatched accordingly. Clearing of the wakeup events should be
+ * done by the SoC specific individual handlers.
+ */
+static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long pending[OMAP_PRCM_MAX_NR_PENDING_REG];
+ unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG];
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ unsigned int virtirq;
+ int nr_irqs = prcm_irq_setup->nr_regs * 32;
+
+ /*
+ * If we are suspended, mask all interrupts from PRCM level,
+ * this does not ack them, and they will be pending until we
+ * re-enable the interrupts, at which point the
+ * omap_prcm_irq_handler will be executed again. The
+ * _save_and_clear_irqen() function must ensure that the PRM
+ * write to disable all IRQs has reached the PRM before
+ * returning, or spurious PRCM interrupts may occur during
+ * suspend.
+ */
+ if (prcm_irq_setup->suspended) {
+ prcm_irq_setup->save_and_clear_irqen(prcm_irq_setup->saved_mask);
+ prcm_irq_setup->suspend_save_flag = true;
+ }
+
+ /*
+ * Loop until all pending irqs are handled, since
+ * generic_handle_irq() can cause new irqs to come
+ */
+ while (!prcm_irq_setup->suspended) {
+ prcm_irq_setup->read_pending_irqs(pending);
+
+ /* No bit set, then all IRQs are handled */
+ if (find_first_bit(pending, nr_irqs) >= nr_irqs)
+ break;
+
+ omap_prcm_events_filter_priority(pending, priority_pending);
+
+ /*
+ * Loop on all currently pending irqs so that new irqs
+ * cannot starve previously pending irqs
+ */
+
+ /* Serve priority events first */
+ for_each_set_bit(virtirq, priority_pending, nr_irqs)
+ generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
+
+ /* Serve normal events next */
+ for_each_set_bit(virtirq, pending, nr_irqs)
+ generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
+ }
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+ if (chip->irq_eoi)
+ chip->irq_eoi(&desc->irq_data);
+ chip->irq_unmask(&desc->irq_data);
+
+ prcm_irq_setup->ocp_barrier(); /* avoid spurious IRQs */
+}
+
+/* Public functions */
+
+/**
+ * omap_prcm_event_to_irq - given a PRCM event name, returns the
+ * corresponding IRQ on which the handler should be registered
+ * @name: name of the PRCM interrupt bit to look up - see struct omap_prcm_irq
+ *
+ * Returns the Linux internal IRQ ID corresponding to @name upon success,
+ * or -ENOENT upon failure.
+ */
+int omap_prcm_event_to_irq(const char *name)
+{
+ int i;
+
+ if (!prcm_irq_setup || !name)
+ return -ENOENT;
+
+ for (i = 0; i < prcm_irq_setup->nr_irqs; i++)
+ if (!strcmp(prcm_irq_setup->irqs[i].name, name))
+ return prcm_irq_setup->base_irq +
+ prcm_irq_setup->irqs[i].offset;
+
+ return -ENOENT;
+}
+
+/**
+ * omap_prcm_irq_cleanup - reverses memory allocated and other steps
+ * done by omap_prcm_register_chain_handler()
+ *
+ * No return value.
+ */
+void omap_prcm_irq_cleanup(void)
+{
+ int i;
+
+ if (!prcm_irq_setup) {
+ pr_err("PRCM: IRQ handler not initialized; cannot cleanup\n");
+ return;
+ }
+
+ if (prcm_irq_chips) {
+ for (i = 0; i < prcm_irq_setup->nr_regs; i++) {
+ if (prcm_irq_chips[i])
+ irq_remove_generic_chip(prcm_irq_chips[i],
+ 0xffffffff, 0, 0);
+ prcm_irq_chips[i] = NULL;
+ }
+ kfree(prcm_irq_chips);
+ prcm_irq_chips = NULL;
+ }
+
+ kfree(prcm_irq_setup->saved_mask);
+ prcm_irq_setup->saved_mask = NULL;
+
+ kfree(prcm_irq_setup->priority_mask);
+ prcm_irq_setup->priority_mask = NULL;
+
+ irq_set_chained_handler(prcm_irq_setup->irq, NULL);
+
+ if (prcm_irq_setup->base_irq > 0)
+ irq_free_descs(prcm_irq_setup->base_irq,
+ prcm_irq_setup->nr_regs * 32);
+ prcm_irq_setup->base_irq = 0;
+}
+
+void omap_prcm_irq_prepare(void)
+{
+ prcm_irq_setup->suspended = true;
+}
+
+void omap_prcm_irq_complete(void)
+{
+ prcm_irq_setup->suspended = false;
+
+ /* If we have not saved the masks, do not attempt to restore */
+ if (!prcm_irq_setup->suspend_save_flag)
+ return;
+
+ prcm_irq_setup->suspend_save_flag = false;
+
+ /*
+ * Re-enable all masked PRCM irq sources, this causes the PRCM
+ * interrupt to fire immediately if the events were masked
+ * previously in the chain handler
+ */
+ prcm_irq_setup->restore_irqen(prcm_irq_setup->saved_mask);
+}
+
+/**
+ * omap_prcm_register_chain_handler - initializes the prcm chained interrupt
+ * handler based on provided parameters
+ * @irq_setup: hardware data about the underlying PRM/PRCM
+ *
+ * Set up the PRCM chained interrupt handler on the PRCM IRQ. Sets up
+ * one generic IRQ chip per PRM interrupt status/enable register pair.
+ * Returns 0 upon success, -EINVAL if called twice or if invalid
+ * arguments are passed, or -ENOMEM on any other error.
+ */
+int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
+{
+ int nr_regs = irq_setup->nr_regs;
+ u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG];
+ int offset, i;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ if (!irq_setup)
+ return -EINVAL;
+
+ if (prcm_irq_setup) {
+ pr_err("PRCM: already initialized; won't reinitialize\n");
+ return -EINVAL;
+ }
+
+ if (nr_regs > OMAP_PRCM_MAX_NR_PENDING_REG) {
+ pr_err("PRCM: nr_regs too large\n");
+ return -EINVAL;
+ }
+
+ prcm_irq_setup = irq_setup;
+
+ prcm_irq_chips = kzalloc(sizeof(void *) * nr_regs, GFP_KERNEL);
+ prcm_irq_setup->saved_mask = kzalloc(sizeof(u32) * nr_regs, GFP_KERNEL);
+ prcm_irq_setup->priority_mask = kzalloc(sizeof(u32) * nr_regs,
+ GFP_KERNEL);
+
+ if (!prcm_irq_chips || !prcm_irq_setup->saved_mask ||
+ !prcm_irq_setup->priority_mask) {
+ pr_err("PRCM: kzalloc failed\n");
+ goto err;
+ }
+
+ memset(mask, 0, sizeof(mask));
+
+ for (i = 0; i < irq_setup->nr_irqs; i++) {
+ offset = irq_setup->irqs[i].offset;
+ mask[offset >> 5] |= 1 << (offset & 0x1f);
+ if (irq_setup->irqs[i].priority)
+ irq_setup->priority_mask[offset >> 5] |=
+ 1 << (offset & 0x1f);
+ }
+
+ irq_set_chained_handler(irq_setup->irq, omap_prcm_irq_handler);
+
+ irq_setup->base_irq = irq_alloc_descs(-1, 0, irq_setup->nr_regs * 32,
+ 0);
+
+ if (irq_setup->base_irq < 0) {
+ pr_err("PRCM: failed to allocate irq descs: %d\n",
+ irq_setup->base_irq);
+ goto err;
+ }
+
+ for (i = 0; i <= irq_setup->nr_regs; i++) {
+ gc = irq_alloc_generic_chip("PRCM", 1,
+ irq_setup->base_irq + i * 32, prm_base,
+ handle_level_irq);
+
+ if (!gc) {
+ pr_err("PRCM: failed to allocate generic chip\n");
+ goto err;
+ }
+ ct = gc->chip_types;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
+ ct->chip.irq_mask = irq_gc_mask_clr_bit;
+ ct->chip.irq_unmask = irq_gc_mask_set_bit;
+
+ ct->regs.ack = irq_setup->ack + i * 4;
+ ct->regs.mask = irq_setup->mask + i * 4;
+
+ irq_setup_generic_chip(gc, mask[i], 0, IRQ_NOREQUEST, 0);
+ prcm_irq_chips[i] = gc;
+ }
+
+ return 0;
+
+err:
+ omap_prcm_irq_cleanup();
+ return -ENOMEM;
+}
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index d0f009cbfb50..247d89478f24 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -19,26 +19,21 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/serial_reg.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/serial_8250.h>
#include <linux/pm_runtime.h>
#include <linux/console.h>
-#ifdef CONFIG_SERIAL_OMAP
#include <plat/omap-serial.h>
-#endif
-
#include "common.h"
#include <plat/board.h>
-#include <plat/clock.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
+#include <plat/omap-pm.h>
#include "prm2xxx_3xxx.h"
#include "pm.h"
@@ -47,603 +42,226 @@
#include "control.h"
#include "mux.h"
-#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52
-#define UART_OMAP_WER 0x17 /* Wake-up enable register */
-
-#define UART_ERRATA_FIFO_FULL_ABORT (0x1 << 0)
-#define UART_ERRATA_i202_MDR1_ACCESS (0x1 << 1)
-
/*
- * NOTE: By default the serial timeout is disabled as it causes lost characters
- * over the serial ports. This means that the UART clocks will stay on until
- * disabled via sysfs. This also causes that any deeper omap sleep states are
- * blocked.
+ * NOTE: By default the serial auto_suspend timeout is disabled as it causes
+ * lost characters over the serial ports. This means that the UART clocks will
+ * stay on until power/autosuspend_delay is set for the uart from sysfs.
+ * This also causes that any deeper omap sleep states are blocked.
*/
-#define DEFAULT_TIMEOUT 0
+#define DEFAULT_AUTOSUSPEND_DELAY -1
#define MAX_UART_HWMOD_NAME_LEN 16
struct omap_uart_state {
int num;
int can_sleep;
- struct timer_list timer;
- u32 timeout;
-
- void __iomem *wk_st;
- void __iomem *wk_en;
- u32 wk_mask;
- u32 padconf;
- u32 dma_enabled;
-
- struct clk *ick;
- struct clk *fck;
- int clocked;
-
- int irq;
- int regshift;
- int irqflags;
- void __iomem *membase;
- resource_size_t mapbase;
struct list_head node;
struct omap_hwmod *oh;
struct platform_device *pdev;
-
- u32 errata;
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
- int context_valid;
-
- /* Registers to be saved/restored for OFF-mode */
- u16 dll;
- u16 dlh;
- u16 ier;
- u16 sysc;
- u16 scr;
- u16 wer;
- u16 mcr;
-#endif
};
static LIST_HEAD(uart_list);
static u8 num_uarts;
+static u8 console_uart_id = -1;
+static u8 no_console_suspend;
+static u8 uart_debug;
+
+#define DEFAULT_RXDMA_POLLRATE 1 /* RX DMA polling rate (us) */
+#define DEFAULT_RXDMA_BUFSIZE 4096 /* RX DMA buffer size */
+#define DEFAULT_RXDMA_TIMEOUT (3 * HZ)/* RX DMA timeout (jiffies) */
+
+static struct omap_uart_port_info omap_serial_default_info[] __initdata = {
+ {
+ .dma_enabled = false,
+ .dma_rx_buf_size = DEFAULT_RXDMA_BUFSIZE,
+ .dma_rx_poll_rate = DEFAULT_RXDMA_POLLRATE,
+ .dma_rx_timeout = DEFAULT_RXDMA_TIMEOUT,
+ .autosuspend_timeout = DEFAULT_AUTOSUSPEND_DELAY,
+ },
+};
-static inline unsigned int __serial_read_reg(struct uart_port *up,
- int offset)
-{
- offset <<= up->regshift;
- return (unsigned int)__raw_readb(up->membase + offset);
-}
-
-static inline unsigned int serial_read_reg(struct omap_uart_state *uart,
- int offset)
+#ifdef CONFIG_PM
+static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
{
- offset <<= uart->regshift;
- return (unsigned int)__raw_readb(uart->membase + offset);
-}
+ struct omap_device *od = to_omap_device(pdev);
-static inline void __serial_write_reg(struct uart_port *up, int offset,
- int value)
-{
- offset <<= up->regshift;
- __raw_writeb(value, up->membase + offset);
-}
+ if (!od)
+ return;
-static inline void serial_write_reg(struct omap_uart_state *uart, int offset,
- int value)
-{
- offset <<= uart->regshift;
- __raw_writeb(value, uart->membase + offset);
+ if (enable)
+ omap_hwmod_enable_wakeup(od->hwmods[0]);
+ else
+ omap_hwmod_disable_wakeup(od->hwmods[0]);
}
/*
- * Internal UARTs need to be initialized for the 8250 autoconfig to work
- * properly. Note that the TX watermark initialization may not be needed
- * once the 8250.c watermark handling code is merged.
+ * Errata i291: [UART]:Cannot Acknowledge Idle Requests
+ * in Smartidle Mode When Configured for DMA Operations.
+ * WA: configure uart in force idle mode.
*/
-
-static inline void __init omap_uart_reset(struct omap_uart_state *uart)
+static void omap_uart_set_noidle(struct platform_device *pdev)
{
- serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
- serial_write_reg(uart, UART_OMAP_SCR, 0x08);
- serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
-}
-
-#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+ struct omap_device *od = to_omap_device(pdev);
-/*
- * Work Around for Errata i202 (3430 - 1.12, 3630 - 1.6)
- * The access to uart register after MDR1 Access
- * causes UART to corrupt data.
- *
- * Need a delay =
- * 5 L4 clock cycles + 5 UART functional clock cycle (@48MHz = ~0.2uS)
- * give 10 times as much
- */
-static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val,
- u8 fcr_val)
-{
- u8 timeout = 255;
-
- serial_write_reg(uart, UART_OMAP_MDR1, mdr1_val);
- udelay(2);
- serial_write_reg(uart, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT |
- UART_FCR_CLEAR_RCVR);
- /*
- * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and
- * TX_FIFO_E bit is 1.
- */
- while (UART_LSR_THRE != (serial_read_reg(uart, UART_LSR) &
- (UART_LSR_THRE | UART_LSR_DR))) {
- timeout--;
- if (!timeout) {
- /* Should *never* happen. we warn and carry on */
- dev_crit(&uart->pdev->dev, "Errata i202: timedout %x\n",
- serial_read_reg(uart, UART_LSR));
- break;
- }
- udelay(1);
- }
+ omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
}
-static void omap_uart_save_context(struct omap_uart_state *uart)
+static void omap_uart_set_forceidle(struct platform_device *pdev)
{
- u16 lcr = 0;
+ struct omap_device *od = to_omap_device(pdev);
- if (!enable_off_mode)
- return;
-
- lcr = serial_read_reg(uart, UART_LCR);
- serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B);
- uart->dll = serial_read_reg(uart, UART_DLL);
- uart->dlh = serial_read_reg(uart, UART_DLM);
- serial_write_reg(uart, UART_LCR, lcr);
- uart->ier = serial_read_reg(uart, UART_IER);
- uart->sysc = serial_read_reg(uart, UART_OMAP_SYSC);
- uart->scr = serial_read_reg(uart, UART_OMAP_SCR);
- uart->wer = serial_read_reg(uart, UART_OMAP_WER);
- serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_A);
- uart->mcr = serial_read_reg(uart, UART_MCR);
- serial_write_reg(uart, UART_LCR, lcr);
-
- uart->context_valid = 1;
+ omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_FORCE);
}
-static void omap_uart_restore_context(struct omap_uart_state *uart)
-{
- u16 efr = 0;
-
- if (!enable_off_mode)
- return;
-
- if (!uart->context_valid)
- return;
-
- uart->context_valid = 0;
-
- if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
- omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_DISABLE, 0xA0);
- else
- serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
-
- serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B);
- efr = serial_read_reg(uart, UART_EFR);
- serial_write_reg(uart, UART_EFR, UART_EFR_ECB);
- serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
- serial_write_reg(uart, UART_IER, 0x0);
- serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_write_reg(uart, UART_DLL, uart->dll);
- serial_write_reg(uart, UART_DLM, uart->dlh);
- serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
- serial_write_reg(uart, UART_IER, uart->ier);
- serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_A);
- serial_write_reg(uart, UART_MCR, uart->mcr);
- serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_write_reg(uart, UART_EFR, efr);
- serial_write_reg(uart, UART_LCR, UART_LCR_WLEN8);
- serial_write_reg(uart, UART_OMAP_SCR, uart->scr);
- serial_write_reg(uart, UART_OMAP_WER, uart->wer);
- serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc);
-
- if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
- omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_16X_MODE, 0xA1);
- else
- /* UART 16x mode */
- serial_write_reg(uart, UART_OMAP_MDR1,
- UART_OMAP_MDR1_16X_MODE);
-}
#else
-static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
-static inline void omap_uart_restore_context(struct omap_uart_state *uart) {}
-#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */
-
-static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
-{
- if (uart->clocked)
- return;
-
- omap_device_enable(uart->pdev);
- uart->clocked = 1;
- omap_uart_restore_context(uart);
-}
-
-#ifdef CONFIG_PM
-
-static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
-{
- if (!uart->clocked)
- return;
-
- omap_uart_save_context(uart);
- uart->clocked = 0;
- omap_device_idle(uart->pdev);
-}
-
-static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
-{
- /* Set wake-enable bit */
- if (uart->wk_en && uart->wk_mask) {
- u32 v = __raw_readl(uart->wk_en);
- v |= uart->wk_mask;
- __raw_writel(v, uart->wk_en);
- }
-
- /* Ensure IOPAD wake-enables are set */
- if (cpu_is_omap34xx() && uart->padconf) {
- u16 v = omap_ctrl_readw(uart->padconf);
- v |= OMAP3_PADCONF_WAKEUPENABLE0;
- omap_ctrl_writew(v, uart->padconf);
- }
-}
-
-static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
-{
- /* Clear wake-enable bit */
- if (uart->wk_en && uart->wk_mask) {
- u32 v = __raw_readl(uart->wk_en);
- v &= ~uart->wk_mask;
- __raw_writel(v, uart->wk_en);
- }
-
- /* Ensure IOPAD wake-enables are cleared */
- if (cpu_is_omap34xx() && uart->padconf) {
- u16 v = omap_ctrl_readw(uart->padconf);
- v &= ~OMAP3_PADCONF_WAKEUPENABLE0;
- omap_ctrl_writew(v, uart->padconf);
- }
-}
-
-static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
- int enable)
-{
- u8 idlemode;
-
- if (enable) {
- /**
- * Errata 2.15: [UART]:Cannot Acknowledge Idle Requests
- * in Smartidle Mode When Configured for DMA Operations.
- */
- if (uart->dma_enabled)
- idlemode = HWMOD_IDLEMODE_FORCE;
- else
- idlemode = HWMOD_IDLEMODE_SMART;
- } else {
- idlemode = HWMOD_IDLEMODE_NO;
- }
-
- omap_hwmod_set_slave_idlemode(uart->oh, idlemode);
-}
-
-static void omap_uart_block_sleep(struct omap_uart_state *uart)
-{
- omap_uart_enable_clocks(uart);
-
- omap_uart_smart_idle_enable(uart, 0);
- uart->can_sleep = 0;
- if (uart->timeout)
- mod_timer(&uart->timer, jiffies + uart->timeout);
- else
- del_timer(&uart->timer);
-}
-
-static void omap_uart_allow_sleep(struct omap_uart_state *uart)
-{
- if (device_may_wakeup(&uart->pdev->dev))
- omap_uart_enable_wakeup(uart);
- else
- omap_uart_disable_wakeup(uart);
-
- if (!uart->clocked)
- return;
-
- omap_uart_smart_idle_enable(uart, 1);
- uart->can_sleep = 1;
- del_timer(&uart->timer);
-}
-
-static void omap_uart_idle_timer(unsigned long data)
-{
- struct omap_uart_state *uart = (struct omap_uart_state *)data;
-
- omap_uart_allow_sleep(uart);
-}
-
-void omap_uart_prepare_idle(int num)
-{
- struct omap_uart_state *uart;
-
- list_for_each_entry(uart, &uart_list, node) {
- if (num == uart->num && uart->can_sleep) {
- omap_uart_disable_clocks(uart);
- return;
- }
- }
-}
-
-void omap_uart_resume_idle(int num)
-{
- struct omap_uart_state *uart;
-
- list_for_each_entry(uart, &uart_list, node) {
- if (num == uart->num && uart->can_sleep) {
- omap_uart_enable_clocks(uart);
-
- /* Check for IO pad wakeup */
- if (cpu_is_omap34xx() && uart->padconf) {
- u16 p = omap_ctrl_readw(uart->padconf);
-
- if (p & OMAP3_PADCONF_WAKEUPEVENT0)
- omap_uart_block_sleep(uart);
- }
-
- /* Check for normal UART wakeup */
- if (__raw_readl(uart->wk_st) & uart->wk_mask)
- omap_uart_block_sleep(uart);
- return;
- }
- }
-}
-
-void omap_uart_prepare_suspend(void)
-{
- struct omap_uart_state *uart;
-
- list_for_each_entry(uart, &uart_list, node) {
- omap_uart_allow_sleep(uart);
- }
-}
-
-int omap_uart_can_sleep(void)
-{
- struct omap_uart_state *uart;
- int can_sleep = 1;
-
- list_for_each_entry(uart, &uart_list, node) {
- if (!uart->clocked)
- continue;
-
- if (!uart->can_sleep) {
- can_sleep = 0;
- continue;
- }
-
- /* This UART can now safely sleep. */
- omap_uart_allow_sleep(uart);
- }
-
- return can_sleep;
-}
+static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+{}
+static void omap_uart_set_noidle(struct platform_device *pdev) {}
+static void omap_uart_set_forceidle(struct platform_device *pdev) {}
+#endif /* CONFIG_PM */
-/**
- * omap_uart_interrupt()
- *
- * This handler is used only to detect that *any* UART interrupt has
- * occurred. It does _nothing_ to handle the interrupt. Rather,
- * any UART interrupt will trigger the inactivity timer so the
- * UART will not idle or sleep for its timeout period.
- *
- **/
-/* static int first_interrupt; */
-static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
-{
- struct omap_uart_state *uart = dev_id;
+#ifdef CONFIG_OMAP_MUX
+static struct omap_device_pad default_uart1_pads[] __initdata = {
+ {
+ .name = "uart1_cts.uart1_cts",
+ .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
+ },
+ {
+ .name = "uart1_rts.uart1_rts",
+ .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
+ },
+ {
+ .name = "uart1_tx.uart1_tx",
+ .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
+ },
+ {
+ .name = "uart1_rx.uart1_rx",
+ .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
+ .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
+ .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
+ },
+};
- omap_uart_block_sleep(uart);
+static struct omap_device_pad default_uart2_pads[] __initdata = {
+ {
+ .name = "uart2_cts.uart2_cts",
+ .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
+ },
+ {
+ .name = "uart2_rts.uart2_rts",
+ .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
+ },
+ {
+ .name = "uart2_tx.uart2_tx",
+ .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
+ },
+ {
+ .name = "uart2_rx.uart2_rx",
+ .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
+ .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
+ .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
+ },
+};
- return IRQ_NONE;
-}
+static struct omap_device_pad default_uart3_pads[] __initdata = {
+ {
+ .name = "uart3_cts_rctx.uart3_cts_rctx",
+ .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
+ },
+ {
+ .name = "uart3_rts_sd.uart3_rts_sd",
+ .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
+ },
+ {
+ .name = "uart3_tx_irtx.uart3_tx_irtx",
+ .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
+ },
+ {
+ .name = "uart3_rx_irrx.uart3_rx_irrx",
+ .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
+ .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+ .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+ },
+};
-static void omap_uart_idle_init(struct omap_uart_state *uart)
-{
- int ret;
-
- uart->can_sleep = 0;
- uart->timeout = DEFAULT_TIMEOUT;
- setup_timer(&uart->timer, omap_uart_idle_timer,
- (unsigned long) uart);
- if (uart->timeout)
- mod_timer(&uart->timer, jiffies + uart->timeout);
- omap_uart_smart_idle_enable(uart, 0);
-
- if (cpu_is_omap34xx() && !(cpu_is_ti81xx() || cpu_is_am33xx())) {
- u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD;
- u32 wk_mask = 0;
- u32 padconf = 0;
-
- /* XXX These PRM accesses do not belong here */
- uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1);
- uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1);
- switch (uart->num) {
- case 0:
- wk_mask = OMAP3430_ST_UART1_MASK;
- padconf = 0x182;
- break;
- case 1:
- wk_mask = OMAP3430_ST_UART2_MASK;
- padconf = 0x17a;
- break;
- case 2:
- wk_mask = OMAP3430_ST_UART3_MASK;
- padconf = 0x19e;
- break;
- case 3:
- wk_mask = OMAP3630_ST_UART4_MASK;
- padconf = 0x0d2;
- break;
- }
- uart->wk_mask = wk_mask;
- uart->padconf = padconf;
- } else if (cpu_is_omap24xx()) {
- u32 wk_mask = 0;
- u32 wk_en = PM_WKEN1, wk_st = PM_WKST1;
-
- switch (uart->num) {
- case 0:
- wk_mask = OMAP24XX_ST_UART1_MASK;
- break;
- case 1:
- wk_mask = OMAP24XX_ST_UART2_MASK;
- break;
- case 2:
- wk_en = OMAP24XX_PM_WKEN2;
- wk_st = OMAP24XX_PM_WKST2;
- wk_mask = OMAP24XX_ST_UART3_MASK;
- break;
- }
- uart->wk_mask = wk_mask;
- if (cpu_is_omap2430()) {
- uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, wk_en);
- uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, wk_st);
- } else if (cpu_is_omap2420()) {
- uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, wk_en);
- uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, wk_st);
- }
- } else {
- uart->wk_en = NULL;
- uart->wk_st = NULL;
- uart->wk_mask = 0;
- uart->padconf = 0;
- }
+static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = {
+ {
+ .name = "gpmc_wait2.uart4_tx",
+ .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
+ },
+ {
+ .name = "gpmc_wait3.uart4_rx",
+ .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
+ .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
+ .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
+ },
+};
- uart->irqflags |= IRQF_SHARED;
- ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt,
- IRQF_SHARED, "serial idle", (void *)uart);
- WARN_ON(ret);
-}
+static struct omap_device_pad default_omap4_uart4_pads[] __initdata = {
+ {
+ .name = "uart4_tx.uart4_tx",
+ .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
+ },
+ {
+ .name = "uart4_rx.uart4_rx",
+ .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
+ .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+ .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+ },
+};
-void omap_uart_enable_irqs(int enable)
+static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
{
- int ret;
- struct omap_uart_state *uart;
-
- list_for_each_entry(uart, &uart_list, node) {
- if (enable) {
- pm_runtime_put_sync(&uart->pdev->dev);
- ret = request_threaded_irq(uart->irq, NULL,
- omap_uart_interrupt,
- IRQF_SHARED,
- "serial idle",
- (void *)uart);
- } else {
- pm_runtime_get_noresume(&uart->pdev->dev);
- free_irq(uart->irq, (void *)uart);
+ switch (bdata->id) {
+ case 0:
+ bdata->pads = default_uart1_pads;
+ bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads);
+ break;
+ case 1:
+ bdata->pads = default_uart2_pads;
+ bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads);
+ break;
+ case 2:
+ bdata->pads = default_uart3_pads;
+ bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads);
+ break;
+ case 3:
+ if (cpu_is_omap44xx()) {
+ bdata->pads = default_omap4_uart4_pads;
+ bdata->pads_cnt =
+ ARRAY_SIZE(default_omap4_uart4_pads);
+ } else if (cpu_is_omap3630()) {
+ bdata->pads = default_omap36xx_uart4_pads;
+ bdata->pads_cnt =
+ ARRAY_SIZE(default_omap36xx_uart4_pads);
}
+ break;
+ default:
+ break;
}
}
-
-static ssize_t sleep_timeout_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct omap_device *odev = to_omap_device(pdev);
- struct omap_uart_state *uart = odev->hwmods[0]->dev_attr;
-
- return sprintf(buf, "%u\n", uart->timeout / HZ);
-}
-
-static ssize_t sleep_timeout_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t n)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct omap_device *odev = to_omap_device(pdev);
- struct omap_uart_state *uart = odev->hwmods[0]->dev_attr;
- unsigned int value;
-
- if (sscanf(buf, "%u", &value) != 1) {
- dev_err(dev, "sleep_timeout_store: Invalid value\n");
- return -EINVAL;
- }
-
- uart->timeout = value * HZ;
- if (uart->timeout)
- mod_timer(&uart->timer, jiffies + uart->timeout);
- else
- /* A zero value means disable timeout feature */
- omap_uart_block_sleep(uart);
-
- return n;
-}
-
-static DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show,
- sleep_timeout_store);
-#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
#else
-static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
-static void omap_uart_block_sleep(struct omap_uart_state *uart)
-{
- /* Needed to enable UART clocks when built without CONFIG_PM */
- omap_uart_enable_clocks(uart);
-}
-#define DEV_CREATE_FILE(dev, attr)
-#endif /* CONFIG_PM */
-
-#ifndef CONFIG_SERIAL_OMAP
-/*
- * Override the default 8250 read handler: mem_serial_in()
- * Empty RX fifo read causes an abort on omap3630 and omap4
- * This function makes sure that an empty rx fifo is not read on these silicons
- * (OMAP1/2/3430 are not affected)
- */
-static unsigned int serial_in_override(struct uart_port *up, int offset)
-{
- if (UART_RX == offset) {
- unsigned int lsr;
- lsr = __serial_read_reg(up, UART_LSR);
- if (!(lsr & UART_LSR_DR))
- return -EPERM;
- }
-
- return __serial_read_reg(up, offset);
-}
+static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
+#endif
-static void serial_out_override(struct uart_port *up, int offset, int value)
+char *cmdline_find_option(char *str)
{
- unsigned int status, tmout = 10000;
+ extern char *saved_command_line;
- status = __serial_read_reg(up, UART_LSR);
- while (!(status & UART_LSR_THRE)) {
- /* Wait up to 10ms for the character(s) to be sent. */
- if (--tmout == 0)
- break;
- udelay(1);
- status = __serial_read_reg(up, UART_LSR);
- }
- __serial_write_reg(up, offset, value);
+ return strstr(saved_command_line, str);
}
-#endif
static int __init omap_serial_early_init(void)
{
- int i = 0;
-
do {
char oh_name[MAX_UART_HWMOD_NAME_LEN];
struct omap_hwmod *oh;
struct omap_uart_state *uart;
+ char uart_name[MAX_UART_HWMOD_NAME_LEN];
snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN,
- "uart%d", i + 1);
+ "uart%d", num_uarts + 1);
oh = omap_hwmod_lookup(oh_name);
if (!oh)
break;
@@ -653,21 +271,35 @@ static int __init omap_serial_early_init(void)
return -ENODEV;
uart->oh = oh;
- uart->num = i++;
+ uart->num = num_uarts++;
list_add_tail(&uart->node, &uart_list);
- num_uarts++;
-
- /*
- * NOTE: omap_hwmod_setup*() has not yet been called,
- * so no hwmod functions will work yet.
- */
-
- /*
- * During UART early init, device need to be probed
- * to determine SoC specific init before omap_device
- * is ready. Therefore, don't allow idle here
- */
- uart->oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
+ snprintf(uart_name, MAX_UART_HWMOD_NAME_LEN,
+ "%s%d", OMAP_SERIAL_NAME, uart->num);
+
+ if (cmdline_find_option(uart_name)) {
+ console_uart_id = uart->num;
+
+ if (console_loglevel >= 10) {
+ uart_debug = true;
+ pr_info("%s used as console in debug mode"
+ " uart%d clocks will not be"
+ " gated", uart_name, uart->num);
+ }
+
+ if (cmdline_find_option("no_console_suspend"))
+ no_console_suspend = true;
+
+ /*
+ * omap-uart can be used for earlyprintk logs
+ * So if omap-uart is used as console then prevent
+ * uart reset and idle to get logs from omap-uart
+ * until uart console driver is available to take
+ * care for console messages.
+ * Idling or resetting omap-uart while printing logs
+ * early boot logs can stall the boot-up.
+ */
+ oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
+ }
} while (1);
return 0;
@@ -677,6 +309,7 @@ core_initcall(omap_serial_early_init);
/**
* omap_serial_init_port() - initialize single serial port
* @bdata: port specific board data pointer
+ * @info: platform specific data pointer
*
* This function initialies serial driver for given port only.
* Platforms can call this function instead of omap_serial_init()
@@ -685,7 +318,8 @@ core_initcall(omap_serial_early_init);
* Don't mix calls to omap_serial_init_port() and omap_serial_init(),
* use only one of the two.
*/
-void __init omap_serial_init_port(struct omap_board_data *bdata)
+void __init omap_serial_init_port(struct omap_board_data *bdata,
+ struct omap_uart_port_info *info)
{
struct omap_uart_state *uart;
struct omap_hwmod *oh;
@@ -693,15 +327,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
void *pdata = NULL;
u32 pdata_size = 0;
char *name;
-#ifndef CONFIG_SERIAL_OMAP
- struct plat_serial8250_port ports[2] = {
- {},
- {.flags = 0},
- };
- struct plat_serial8250_port *p = &ports[0];
-#else
struct omap_uart_port_info omap_up;
-#endif
if (WARN_ON(!bdata))
return;
@@ -713,66 +339,34 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
list_for_each_entry(uart, &uart_list, node)
if (bdata->id == uart->num)
break;
+ if (!info)
+ info = omap_serial_default_info;
oh = uart->oh;
- uart->dma_enabled = 0;
-#ifndef CONFIG_SERIAL_OMAP
- name = "serial8250";
-
- /*
- * !! 8250 driver does not use standard IORESOURCE* It
- * has it's own custom pdata that can be taken from
- * the hwmod resource data. But, this needs to be
- * done after the build.
- *
- * ?? does it have to be done before the register ??
- * YES, because platform_device_data_add() copies
- * pdata, it does not use a pointer.
- */
- p->flags = UPF_BOOT_AUTOCONF;
- p->iotype = UPIO_MEM;
- p->regshift = 2;
- p->uartclk = OMAP24XX_BASE_BAUD * 16;
- p->irq = oh->mpu_irqs[0].irq;
- p->mapbase = oh->slaves[0]->addr->pa_start;
- p->membase = omap_hwmod_get_mpu_rt_va(oh);
- p->irqflags = IRQF_SHARED;
- p->private_data = uart;
-
- /*
- * omap44xx, ti816x: Never read empty UART fifo
- * omap3xxx: Never read empty UART fifo on UARTs
- * with IP rev >=0x52
- */
- uart->regshift = p->regshift;
- uart->membase = p->membase;
- if (cpu_is_omap44xx() || cpu_is_ti81xx())
- uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
- else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF)
- >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
- uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
-
- if (uart->errata & UART_ERRATA_FIFO_FULL_ABORT) {
- p->serial_in = serial_in_override;
- p->serial_out = serial_out_override;
- }
-
- pdata = &ports[0];
- pdata_size = 2 * sizeof(struct plat_serial8250_port);
-#else
-
name = DRIVER_NAME;
- omap_up.dma_enabled = uart->dma_enabled;
+ omap_up.dma_enabled = info->dma_enabled;
omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
- omap_up.mapbase = oh->slaves[0]->addr->pa_start;
- omap_up.membase = omap_hwmod_get_mpu_rt_va(oh);
- omap_up.irqflags = IRQF_SHARED;
- omap_up.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ omap_up.flags = UPF_BOOT_AUTOCONF;
+ omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count;
+ omap_up.set_forceidle = omap_uart_set_forceidle;
+ omap_up.set_noidle = omap_uart_set_noidle;
+ omap_up.enable_wakeup = omap_uart_enable_wakeup;
+ omap_up.dma_rx_buf_size = info->dma_rx_buf_size;
+ omap_up.dma_rx_timeout = info->dma_rx_timeout;
+ omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
+ omap_up.autosuspend_timeout = info->autosuspend_timeout;
+
+ /* Enable the MDR1 Errata i202 for OMAP2430/3xxx/44xx */
+ if (!cpu_is_omap2420() && !cpu_is_ti816x())
+ omap_up.errata |= UART_ERRATA_i202_MDR1_ACCESS;
+
+ /* Enable DMA Mode Force Idle Errata i291 for omap34xx/3630 */
+ if (cpu_is_omap34xx() || cpu_is_omap3630())
+ omap_up.errata |= UART_ERRATA_i291_DMA_FORCEIDLE;
pdata = &omap_up;
pdata_size = sizeof(struct omap_uart_port_info);
-#endif
if (WARN_ON(!oh))
return;
@@ -782,64 +376,29 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
name, oh->name);
- omap_device_disable_idle_on_suspend(pdev);
+ if ((console_uart_id == bdata->id) && no_console_suspend)
+ omap_device_disable_idle_on_suspend(pdev);
+
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
- uart->irq = oh->mpu_irqs[0].irq;
- uart->regshift = 2;
- uart->mapbase = oh->slaves[0]->addr->pa_start;
- uart->membase = omap_hwmod_get_mpu_rt_va(oh);
uart->pdev = pdev;
oh->dev_attr = uart;
- console_lock(); /* in case the earlycon is on the UART */
-
- /*
- * Because of early UART probing, UART did not get idled
- * on init. Now that omap_device is ready, ensure full idle
- * before doing omap_device_enable().
- */
- omap_hwmod_idle(uart->oh);
-
- omap_device_enable(uart->pdev);
- omap_uart_idle_init(uart);
- omap_uart_reset(uart);
- omap_hwmod_enable_wakeup(uart->oh);
- omap_device_idle(uart->pdev);
-
- /*
- * Need to block sleep long enough for interrupt driven
- * driver to start. Console driver is in polling mode
- * so device needs to be kept enabled while polling driver
- * is in use.
- */
- if (uart->timeout)
- uart->timeout = (30 * HZ);
- omap_uart_block_sleep(uart);
- uart->timeout = DEFAULT_TIMEOUT;
-
- console_unlock();
-
- if ((cpu_is_omap34xx() && uart->padconf) ||
- (uart->wk_en && uart->wk_mask)) {
+ if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads)
+ && !uart_debug)
device_init_wakeup(&pdev->dev, true);
- DEV_CREATE_FILE(&pdev->dev, &dev_attr_sleep_timeout);
- }
-
- /* Enable the MDR1 errata for OMAP3 */
- if (cpu_is_omap34xx() && !(cpu_is_ti81xx() || cpu_is_am33xx()))
- uart->errata |= UART_ERRATA_i202_MDR1_ACCESS;
}
/**
- * omap_serial_init() - initialize all supported serial ports
+ * omap_serial_board_init() - initialize all supported serial ports
+ * @info: platform specific data pointer
*
* Initializes all available UARTs as serial ports. Platforms
* can call this function when they want to have default behaviour
* for serial ports (e.g initialize them all as serial ports).
*/
-void __init omap_serial_init(void)
+void __init omap_serial_board_init(struct omap_uart_port_info *info)
{
struct omap_uart_state *uart;
struct omap_board_data bdata;
@@ -849,7 +408,25 @@ void __init omap_serial_init(void)
bdata.flags = 0;
bdata.pads = NULL;
bdata.pads_cnt = 0;
- omap_serial_init_port(&bdata);
+ if (cpu_is_omap44xx() || cpu_is_omap34xx())
+ omap_serial_fill_default_pads(&bdata);
+
+ if (!info)
+ omap_serial_init_port(&bdata, NULL);
+ else
+ omap_serial_init_port(&bdata, &info[uart->num]);
}
}
+
+/**
+ * omap_serial_init() - initialize all supported serial ports
+ *
+ * Initializes all available UARTs.
+ * Platforms can call this function when they want to have default behaviour
+ * for serial ports (e.g initialize them all as serial ports).
+ */
+void __init omap_serial_init(void)
+{
+ omap_serial_board_init(NULL);
+}
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
new file mode 100644
index 000000000000..abd283400490
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -0,0 +1,379 @@
+/*
+ * OMAP44xx sleep code.
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/system.h>
+#include <asm/smp_scu.h>
+#include <asm/memory.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <plat/omap44xx.h>
+#include <mach/omap-secure.h>
+
+#include "common.h"
+#include "omap4-sar-layout.h"
+
+#if defined(CONFIG_SMP) && defined(CONFIG_PM)
+
+.macro DO_SMC
+ dsb
+ smc #0
+ dsb
+.endm
+
+ppa_zero_params:
+ .word 0x0
+
+ppa_por_params:
+ .word 1, 0
+
+/*
+ * =============================
+ * == CPU suspend finisher ==
+ * =============================
+ *
+ * void omap4_finish_suspend(unsigned long cpu_state)
+ *
+ * This function code saves the CPU context and performs the CPU
+ * power down sequence. Calling WFI effectively changes the CPU
+ * power domains states to the desired target power state.
+ *
+ * @cpu_state : contains context save state (r0)
+ * 0 - No context lost
+ * 1 - CPUx L1 and logic lost: MPUSS CSWR
+ * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR
+ * 3 - CPUx L1 and logic lost + GIC + L2 lost: MPUSS OFF
+ * @return: This function never returns for CPU OFF and DORMANT power states.
+ * Post WFI, CPU transitions to DORMANT or OFF power state and on wake-up
+ * from this follows a full CPU reset path via ROM code to CPU restore code.
+ * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
+ * It returns to the caller for CPU INACTIVE and ON power states or in case
+ * CPU failed to transition to targeted OFF/DORMANT state.
+ */
+ENTRY(omap4_finish_suspend)
+ stmfd sp!, {lr}
+ cmp r0, #0x0
+ beq do_WFI @ No lowpower state, jump to WFI
+
+ /*
+ * Flush all data from the L1 data cache before disabling
+ * SCTLR.C bit.
+ */
+ bl omap4_get_sar_ram_base
+ ldr r9, [r0, #OMAP_TYPE_OFFSET]
+ cmp r9, #0x1 @ Check for HS device
+ bne skip_secure_l1_clean
+ mov r0, #SCU_PM_NORMAL
+ mov r1, #0xFF @ clean seucre L1
+ stmfd r13!, {r4-r12, r14}
+ ldr r12, =OMAP4_MON_SCU_PWR_INDEX
+ DO_SMC
+ ldmfd r13!, {r4-r12, r14}
+skip_secure_l1_clean:
+ bl v7_flush_dcache_all
+
+ /*
+ * Clear the SCTLR.C bit to prevent further data cache
+ * allocation. Clearing SCTLR.C would make all the data accesses
+ * strongly ordered and would not hit the cache.
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #(1 << 2) @ Disable the C bit
+ mcr p15, 0, r0, c1, c0, 0
+ isb
+
+ /*
+ * Invalidate L1 data cache. Even though only invalidate is
+ * necessary exported flush API is used here. Doing clean
+ * on already clean cache would be almost NOP.
+ */
+ bl v7_flush_dcache_all
+
+ /*
+ * Switch the CPU from Symmetric Multiprocessing (SMP) mode
+ * to AsymmetricMultiprocessing (AMP) mode by programming
+ * the SCU power status to DORMANT or OFF mode.
+ * This enables the CPU to be taken out of coherency by
+ * preventing the CPU from receiving cache, TLB, or BTB
+ * maintenance operations broadcast by other CPUs in the cluster.
+ */
+ bl omap4_get_sar_ram_base
+ mov r8, r0
+ ldr r9, [r8, #OMAP_TYPE_OFFSET]
+ cmp r9, #0x1 @ Check for HS device
+ bne scu_gp_set
+ mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR
+ ands r0, r0, #0x0f
+ ldreq r0, [r8, #SCU_OFFSET0]
+ ldrne r0, [r8, #SCU_OFFSET1]
+ mov r1, #0x00
+ stmfd r13!, {r4-r12, r14}
+ ldr r12, =OMAP4_MON_SCU_PWR_INDEX
+ DO_SMC
+ ldmfd r13!, {r4-r12, r14}
+ b skip_scu_gp_set
+scu_gp_set:
+ mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR
+ ands r0, r0, #0x0f
+ ldreq r1, [r8, #SCU_OFFSET0]
+ ldrne r1, [r8, #SCU_OFFSET1]
+ bl omap4_get_scu_base
+ bl scu_power_mode
+skip_scu_gp_set:
+ mrc p15, 0, r0, c1, c1, 2 @ Read NSACR data
+ tst r0, #(1 << 18)
+ mrcne p15, 0, r0, c1, c0, 1
+ bicne r0, r0, #(1 << 6) @ Disable SMP bit
+ mcrne p15, 0, r0, c1, c0, 1
+ isb
+ dsb
+#ifdef CONFIG_CACHE_L2X0
+ /*
+ * Clean and invalidate the L2 cache.
+ * Common cache-l2x0.c functions can't be used here since it
+ * uses spinlocks. We are out of coherency here with data cache
+ * disabled. The spinlock implementation uses exclusive load/store
+ * instruction which can fail without data cache being enabled.
+ * OMAP4 hardware doesn't support exclusive monitor which can
+ * overcome exclusive access issue. Because of this, CPU can
+ * lead to deadlock.
+ */
+ bl omap4_get_sar_ram_base
+ mov r8, r0
+ mrc p15, 0, r5, c0, c0, 5 @ Read MPIDR
+ ands r5, r5, #0x0f
+ ldreq r0, [r8, #L2X0_SAVE_OFFSET0] @ Retrieve L2 state from SAR
+ ldrne r0, [r8, #L2X0_SAVE_OFFSET1] @ memory.
+ cmp r0, #3
+ bne do_WFI
+#ifdef CONFIG_PL310_ERRATA_727915
+ mov r0, #0x03
+ mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
+ DO_SMC
+#endif
+ bl omap4_get_l2cache_base
+ mov r2, r0
+ ldr r0, =0xffff
+ str r0, [r2, #L2X0_CLEAN_INV_WAY]
+wait:
+ ldr r0, [r2, #L2X0_CLEAN_INV_WAY]
+ ldr r1, =0xffff
+ ands r0, r0, r1
+ bne wait
+#ifdef CONFIG_PL310_ERRATA_727915
+ mov r0, #0x00
+ mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
+ DO_SMC
+#endif
+l2x_sync:
+ bl omap4_get_l2cache_base
+ mov r2, r0
+ mov r0, #0x0
+ str r0, [r2, #L2X0_CACHE_SYNC]
+sync:
+ ldr r0, [r2, #L2X0_CACHE_SYNC]
+ ands r0, r0, #0x1
+ bne sync
+#endif
+
+do_WFI:
+ bl omap_do_wfi
+
+ /*
+ * CPU is here when it failed to enter OFF/DORMANT or
+ * no low power state was attempted.
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ tst r0, #(1 << 2) @ Check C bit enabled?
+ orreq r0, r0, #(1 << 2) @ Enable the C bit
+ mcreq p15, 0, r0, c1, c0, 0
+ isb
+
+ /*
+ * Ensure the CPU power state is set to NORMAL in
+ * SCU power state so that CPU is back in coherency.
+ * In non-coherent mode CPU can lock-up and lead to
+ * system deadlock.
+ */
+ mrc p15, 0, r0, c1, c0, 1
+ tst r0, #(1 << 6) @ Check SMP bit enabled?
+ orreq r0, r0, #(1 << 6)
+ mcreq p15, 0, r0, c1, c0, 1
+ isb
+ bl omap4_get_sar_ram_base
+ mov r8, r0
+ ldr r9, [r8, #OMAP_TYPE_OFFSET]
+ cmp r9, #0x1 @ Check for HS device
+ bne scu_gp_clear
+ mov r0, #SCU_PM_NORMAL
+ mov r1, #0x00
+ stmfd r13!, {r4-r12, r14}
+ ldr r12, =OMAP4_MON_SCU_PWR_INDEX
+ DO_SMC
+ ldmfd r13!, {r4-r12, r14}
+ b skip_scu_gp_clear
+scu_gp_clear:
+ bl omap4_get_scu_base
+ mov r1, #SCU_PM_NORMAL
+ bl scu_power_mode
+skip_scu_gp_clear:
+ isb
+ dsb
+ ldmfd sp!, {pc}
+ENDPROC(omap4_finish_suspend)
+
+/*
+ * ============================
+ * == CPU resume entry point ==
+ * ============================
+ *
+ * void omap4_cpu_resume(void)
+ *
+ * ROM code jumps to this function while waking up from CPU
+ * OFF or DORMANT state. Physical address of the function is
+ * stored in the SAR RAM while entering to OFF or DORMANT mode.
+ * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
+ */
+ENTRY(omap4_cpu_resume)
+ /*
+ * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device.
+ * OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA
+ * init and for CPU1, a secure PPA API provided. CPU0 must be ON
+ * while executing NS_SMP API on CPU1 and PPA version must be 1.4.0+.
+ * OMAP443X GP devices- SMP bit isn't accessible.
+ * OMAP446X GP devices - SMP bit access is enabled on both CPUs.
+ */
+ ldr r8, =OMAP44XX_SAR_RAM_BASE
+ ldr r9, [r8, #OMAP_TYPE_OFFSET]
+ cmp r9, #0x1 @ Skip if GP device
+ bne skip_ns_smp_enable
+ mrc p15, 0, r0, c0, c0, 5
+ ands r0, r0, #0x0f
+ beq skip_ns_smp_enable
+ppa_actrl_retry:
+ mov r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX
+ adr r3, ppa_zero_params @ Pointer to parameters
+ mov r1, #0x0 @ Process ID
+ mov r2, #0x4 @ Flag
+ mov r6, #0xff
+ mov r12, #0x00 @ Secure Service ID
+ DO_SMC
+ cmp r0, #0x0 @ API returns 0 on success.
+ beq enable_smp_bit
+ b ppa_actrl_retry
+enable_smp_bit:
+ mrc p15, 0, r0, c1, c0, 1
+ tst r0, #(1 << 6) @ Check SMP bit enabled?
+ orreq r0, r0, #(1 << 6)
+ mcreq p15, 0, r0, c1, c0, 1
+ isb
+skip_ns_smp_enable:
+#ifdef CONFIG_CACHE_L2X0
+ /*
+ * Restore the L2 AUXCTRL and enable the L2 cache.
+ * OMAP4_MON_L2X0_AUXCTRL_INDEX = Program the L2X0 AUXCTRL
+ * OMAP4_MON_L2X0_CTRL_INDEX = Enable the L2 using L2X0 CTRL
+ * register r0 contains value to be programmed.
+ * L2 cache is already invalidate by ROM code as part
+ * of MPUSS OFF wakeup path.
+ */
+ ldr r2, =OMAP44XX_L2CACHE_BASE
+ ldr r0, [r2, #L2X0_CTRL]
+ and r0, #0x0f
+ cmp r0, #1
+ beq skip_l2en @ Skip if already enabled
+ ldr r3, =OMAP44XX_SAR_RAM_BASE
+ ldr r1, [r3, #OMAP_TYPE_OFFSET]
+ cmp r1, #0x1 @ Check for HS device
+ bne set_gp_por
+ ldr r0, =OMAP4_PPA_L2_POR_INDEX
+ ldr r1, =OMAP44XX_SAR_RAM_BASE
+ ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
+ adr r3, ppa_por_params
+ str r4, [r3, #0x04]
+ mov r1, #0x0 @ Process ID
+ mov r2, #0x4 @ Flag
+ mov r6, #0xff
+ mov r12, #0x00 @ Secure Service ID
+ DO_SMC
+ b set_aux_ctrl
+set_gp_por:
+ ldr r1, =OMAP44XX_SAR_RAM_BASE
+ ldr r0, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
+ ldr r12, =OMAP4_MON_L2X0_PREFETCH_INDEX @ Setup L2 PREFETCH
+ DO_SMC
+set_aux_ctrl:
+ ldr r1, =OMAP44XX_SAR_RAM_BASE
+ ldr r0, [r1, #L2X0_AUXCTRL_OFFSET]
+ ldr r12, =OMAP4_MON_L2X0_AUXCTRL_INDEX @ Setup L2 AUXCTRL
+ DO_SMC
+ mov r0, #0x1
+ ldr r12, =OMAP4_MON_L2X0_CTRL_INDEX @ Enable L2 cache
+ DO_SMC
+skip_l2en:
+#endif
+
+ b cpu_resume @ Jump to generic resume
+ENDPROC(omap4_cpu_resume)
+#endif
+
+#ifndef CONFIG_OMAP4_ERRATA_I688
+ENTRY(omap_bus_sync)
+ mov pc, lr
+ENDPROC(omap_bus_sync)
+#endif
+
+ENTRY(omap_do_wfi)
+ stmfd sp!, {lr}
+ /* Drain interconnect write buffers. */
+ bl omap_bus_sync
+
+ /*
+ * Execute an ISB instruction to ensure that all of the
+ * CP15 register changes have been committed.
+ */
+ isb
+
+ /*
+ * Execute a barrier instruction to ensure that all cache,
+ * TLB and branch predictor maintenance operations issued
+ * by any CPU in the cluster have completed.
+ */
+ dsb
+ dmb
+
+ /*
+ * Execute a WFI instruction and wait until the
+ * STANDBYWFI output is asserted to indicate that the
+ * CPU is in idle and low power state. CPU can specualatively
+ * prefetch the instructions so add NOPs after WFI. Sixteen
+ * NOPs as per Cortex-A9 pipeline.
+ */
+ wfi @ Wait For Interrupt
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ ldmfd sp!, {pc}
+ENDPROC(omap_do_wfi)
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 83cca9bcfc97..1bf0df81bdc6 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -131,6 +131,12 @@ extern void imx53_evk_common_init(void);
extern void imx53_qsb_common_init(void);
extern void imx53_smd_common_init(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-extern void imx6q_pm_init(void);
extern void imx6q_clock_map_io(void);
+
+#ifdef CONFIG_PM
+extern void imx6q_pm_init(void);
+#else
+static inline void imx6q_pm_init(void) {}
+#endif
+
#endif
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index a4d36d601d55..d78298366a91 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -168,7 +168,7 @@ struct cpu_op {
u32 cpu_rate;
};
-int tzic_enable_wake(int is_idle);
+int tzic_enable_wake(void);
extern struct cpu_op *(*get_cpu_op)(int *op);
#endif
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index a3c164c7ba82..98308ec1f321 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -73,7 +73,28 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
#define tzic_set_irq_fiq NULL
#endif
-static unsigned int *wakeup_intr[4];
+#ifdef CONFIG_PM
+static void tzic_irq_suspend(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ int idx = gc->irq_base >> 5;
+
+ __raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx));
+}
+
+static void tzic_irq_resume(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ int idx = gc->irq_base >> 5;
+
+ __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)),
+ tzic_base + TZIC_WAKEUP0(idx));
+}
+
+#else
+#define tzic_irq_suspend NULL
+#define tzic_irq_resume NULL
+#endif
static struct mxc_extra_irq tzic_extra_irq = {
#ifdef CONFIG_FIQ
@@ -91,12 +112,13 @@ static __init void tzic_init_gc(unsigned int irq_start)
handle_level_irq);
gc->private = &tzic_extra_irq;
gc->wake_enabled = IRQ_MSK(32);
- wakeup_intr[idx] = &gc->wake_active;
ct = gc->chip_types;
ct->chip.irq_mask = irq_gc_mask_disable_reg;
ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
ct->chip.irq_set_wake = irq_gc_set_wake;
+ ct->chip.irq_suspend = tzic_irq_suspend;
+ ct->chip.irq_resume = tzic_irq_resume;
ct->regs.disable = TZIC_ENCLEAR0(idx);
ct->regs.enable = TZIC_ENSET0(idx);
@@ -167,23 +189,19 @@ void __init tzic_init_irq(void __iomem *irqbase)
/**
* tzic_enable_wake() - enable wakeup interrupt
*
- * @param is_idle 1 if called in idle loop (ENSET0 register);
- * 0 to be used when called from low power entry
* @return 0 if successful; non-zero otherwise
*/
-int tzic_enable_wake(int is_idle)
+int tzic_enable_wake(void)
{
- unsigned int i, v;
+ unsigned int i;
__raw_writel(1, tzic_base + TZIC_DSMINT);
if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
return -EAGAIN;
- for (i = 0; i < 4; i++) {
- v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) :
- *wakeup_intr[i];
- __raw_writel(v, tzic_base + TZIC_WAKEUP0(i));
- }
+ for (i = 0; i < 4; i++)
+ __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(i)),
+ tzic_base + TZIC_WAKEUP0(i));
return 0;
}
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 2ee6341fffdb..06383b51e655 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -22,6 +22,8 @@
#include <plat/vram.h>
#include <plat/dsp.h>
+#include <plat/omap-secure.h>
+
#define NO_LENGTH_CHECK 0xffffffff
@@ -66,6 +68,7 @@ void __init omap_reserve(void)
omapfb_reserve_sdram_memblock();
omap_vram_reserve_sdram_memblock();
omap_dsp_reserve_sdram_memblock();
+ omap_secure_ram_reserve_memblock();
}
void __init omap_init_consistent_dma_size(void)
diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h
new file mode 100644
index 000000000000..64f9d1c7f1bb
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap-secure.h
@@ -0,0 +1,13 @@
+#ifndef __OMAP_SECURE_H__
+#define __OMAP_SECURE_H__
+
+#include <linux/types.h>
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+extern int omap_secure_ram_reserve_memblock(void);
+#else
+static inline void omap_secure_ram_reserve_memblock(void)
+{ }
+#endif
+
+#endif /* __OMAP_SECURE_H__ */
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 2682043f5a5b..9ff444469f3d 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -19,6 +19,7 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/pm_qos.h>
#include <plat/mux.h>
@@ -33,6 +34,8 @@
#define OMAP_MODE13X_SPEED 230400
+#define OMAP_UART_SCR_TX_EMPTY 0x08
+
/* WER = 0x7F
* Enable module level wakeup in WER reg
*/
@@ -51,18 +54,27 @@
#define OMAP_UART_DMA_CH_FREE -1
-#define RX_TIMEOUT (3 * HZ)
#define OMAP_MAX_HSUART_PORTS 4
#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
+#define UART_ERRATA_i202_MDR1_ACCESS BIT(0)
+#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1)
+
struct omap_uart_port_info {
bool dma_enabled; /* To specify DMA Mode */
unsigned int uartclk; /* UART clock rate */
- void __iomem *membase; /* ioremap cookie or NULL */
- resource_size_t mapbase; /* resource base */
- unsigned long irqflags; /* request_irq flags */
upf_t flags; /* UPF_* flags */
+ u32 errata;
+ unsigned int dma_rx_buf_size;
+ unsigned int dma_rx_timeout;
+ unsigned int autosuspend_timeout;
+ unsigned int dma_rx_poll_rate;
+
+ int (*get_context_loss_count)(struct device *);
+ void (*set_forceidle)(struct platform_device *);
+ void (*set_noidle)(struct platform_device *);
+ void (*enable_wakeup)(struct platform_device *, bool);
};
struct uart_omap_dma {
@@ -86,8 +98,9 @@ struct uart_omap_dma {
spinlock_t rx_lock;
/* timer to poll activity on rx dma */
struct timer_list rx_timer;
- int rx_buf_size;
- int rx_timeout;
+ unsigned int rx_buf_size;
+ unsigned int rx_poll_rate;
+ unsigned int rx_timeout;
};
struct uart_omap_port {
@@ -100,6 +113,10 @@ struct uart_omap_port {
unsigned char mcr;
unsigned char fcr;
unsigned char efr;
+ unsigned char dll;
+ unsigned char dlh;
+ unsigned char mdr1;
+ unsigned char scr;
int use_dma;
/*
@@ -111,6 +128,14 @@ struct uart_omap_port {
unsigned char msr_saved_flags;
char name[20];
unsigned long port_activity;
+ u32 context_loss_cnt;
+ u32 errata;
+ u8 wakeups_enabled;
+
+ struct pm_qos_request pm_qos_request;
+ u32 latency;
+ u32 calc_latency;
+ struct work_struct qos_work;
};
#endif /* __OMAP_SERIAL_H__ */
diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h
index ea2b8a6306e7..c0d478e55c84 100644
--- a/arch/arm/plat-omap/include/plat/omap44xx.h
+++ b/arch/arm/plat-omap/include/plat/omap44xx.h
@@ -45,6 +45,7 @@
#define OMAP44XX_WKUPGEN_BASE 0x48281000
#define OMAP44XX_MCPDM_BASE 0x40132000
#define OMAP44XX_MCPDM_L3_BASE 0x49032000
+#define OMAP44XX_SAR_RAM_BASE 0x4a326000
#define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000)
#define OMAP44XX_HSUSB_OTG_BASE (L4_44XX_BASE + 0xAB000)
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 8b372ede17c1..647010109afa 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -97,6 +97,7 @@ struct omap_hwmod_mux_info {
struct omap_device_pad *pads;
int nr_pads_dynamic;
struct omap_device_pad **pads_dynamic;
+ int *irqs;
bool enabled;
};
@@ -416,10 +417,13 @@ struct omap_hwmod_omap4_prcm {
* _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
* _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
* _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
+ * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
+ * causes the first call to _enable() to only update the pinmux
*/
#define _HWMOD_NO_MPU_PORT (1 << 0)
#define _HWMOD_WAKEUP_ENABLED (1 << 1)
#define _HWMOD_SYSCONFIG_LOADED (1 << 2)
+#define _HWMOD_SKIP_ENABLE (1 << 3)
/*
* omap_hwmod._state definitions
@@ -604,6 +608,8 @@ int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
+int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
+
/*
* Chip variant-specific hwmod init routines - XXX should be converted
* to use initcalls once the initial boot ordering is straightened out
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 80b6d39c31ec..198d1e6a4a6c 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -107,15 +107,13 @@
#ifndef __ASSEMBLER__
struct omap_board_data;
+struct omap_uart_port_info;
extern void omap_serial_init(void);
-extern void omap_serial_init_port(struct omap_board_data *bdata);
extern int omap_uart_can_sleep(void);
-extern void omap_uart_check_wakeup(void);
-extern void omap_uart_prepare_suspend(void);
-extern void omap_uart_prepare_idle(int num);
-extern void omap_uart_resume_idle(int num);
-extern void omap_uart_enable_irqs(int enable);
+extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
+extern void omap_serial_init_port(struct omap_board_data *bdata,
+ struct omap_uart_port_info *platform_data);
#endif
#endif
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index f500fc34d065..75aa1b2bef51 100644
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -95,6 +95,10 @@ static inline void omap_push_sram_idle(void) {}
*/
#define OMAP2_SRAM_PA 0x40200000
#define OMAP3_SRAM_PA 0x40200000
+#ifdef CONFIG_OMAP4_ERRATA_I688
+#define OMAP4_SRAM_PA 0x40304000
+#define OMAP4_SRAM_VA 0xfe404000
+#else
#define OMAP4_SRAM_PA 0x40300000
-
+#endif
#endif
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 6b058a621e8d..4243bdcc87bc 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -40,7 +40,11 @@
#define OMAP1_SRAM_PA 0x20000000
#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
+#ifdef CONFIG_OMAP4_ERRATA_I688
+#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA
+#else
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
+#endif
#if defined(CONFIG_ARCH_OMAP2PLUS)
#define SRAM_BOOTLOADER_SZ 0x00
@@ -161,6 +165,10 @@ static void __init omap_map_sram(void)
if (omap_sram_size == 0)
return;
+#ifdef CONFIG_OMAP4_ERRATA_I688
+ omap_sram_start += PAGE_SIZE;
+ omap_sram_size -= SZ_16K;
+#endif
if (cpu_is_omap34xx()) {
/*
* SRAM must be marked as non-cached on OMAP3 since the